Πρόταση για αγορά usb ψηφιακής κάρτας τηλεόρασης.

[gianniskoz]

Χαιρετώ τα αξιότιμα μέλη του φόρουμ.
Για να μην μακρηγορώ θα μπω κατευθείαν στο θέμα. Είμαι κάτοχος ενός laptop Acer Aspire 5810T (Intel Core 2 Solo, SU3500) και εδώ και 2 χρόνια χρησιμοποιώ την έκδοση ubuntu του ΜΟΝΟΜΑΧΟΥ(10,04). Πρόσφατα τα έφτυσε ο σταθερός μου (που έβλεπα τηλεόραση) με αποτέλεσμα να βλέπω - ή καλύτερα να προσπαθώ να δω- από το laptop. (δεδομένου του Intel atom δεν υπάρχει αρκετή επεξεργαστική ισχύς και ΚΟΛΛΑΕΙ συνέχεια η εικόνα)
Γι' αυτό λοιπόν αν κάποιος έχει να μου προτείνει μια usb ψηφιακή ΚΑΙ αναλογική κάρτα τηλεόρασης που κυκλοφορεί ΤΩΡΑ στο εμπόριο σε καλή τιμή και είναι συμβατή με Linux, τον παρακαλώ πάρα πολύ να μοιραστεί μαζί μας τις γνώσεις του.
*Υ.Γ. έχω ήδη μια Aver Media dvb-t hybrid E830 ΑΛΛΑ μου έχει σπάσει να νεύρα γιατί δεν έχω καταφέρει να την κάνω να δουλέψει.
**σας παρακαλώ μην μου 'πετάξετε' το λινκ με τις συμβατές κάρτες που έχει το σάιτ γιατί οι περισσότερες δεν κυκλοφορούν στο ΕΛΛΑΝΤΑ και οι υπόλοιπες δεν κυκλοφορούν πλέον στο εμπόριο.
***Την κάρτα την θέλω γιατί πιστεύω πως στο linux δεν θα χρειάζεται τόσο πολύ επεξεργαστική δύναμη για να δω απροβλημάτιστα τηλεόραση. ΑΝ ΠΑΡΟΛΑ ΑΥΤΑ κάποιο μέλος πιστεύει ότι με το linux λόγο επεξεργαστή πάλι ΔΕΝ θα μπορώ να κάνω την δουλειά μου παρακαλώ πολύ να μου το πει για να μην πετάξω τζάμπα τα λεφτά μου.
Ευχαριστώ εκ των προτέρων , Γιάννης

[vagrale13]

Καλως μας ηρθες καταρχας!
Πρωτα απ' ολα, καλο θα ηταν να δοκιμασεις να κανεις να δουλεψει η καρτα που εχεις, και οχι να καταφυγεις στη λυση αγορας μιας αλλης.
Αν θελεις να το κανεις αυτο, απλα συνδεσε την καρτα που εχεις, και ποσταρε τα αποτελεσματα των εντολων

Κώδικας: Επιλογή όλων

lsusb
dmesg
lsmod

Επισης, κανε μια αναζητηση εδω http://linuxhcl.com/browse/search+tv-cards?category=21
δες και εδω http://forum.greeklug.gr/viewtopic.php?f=62&t=427

Επισης, αν κανεις μια αναζητηση εδω viewforum.php?f=37
θα βρεις αρκετες καρτες οπου εχουν δωθει λυσεις για να λειτουργησουν σωστα!

[gianniskoz]

lsub:

Κώδικας: Επιλογή όλων

user@giannakoZ:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 07ca:0830 AVerMedia Technologies, Inc.
Bus 002 Device 004: ID 064e:a133 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
user@giannakoZ:~$

dmesg

Κώδικας: Επιλογή όλων

[ 0.150915] pci 0000:00:1f.2: reg 14 io port: [0x411c-0x411f]
[ 0.150925] pci 0000:00:1f.2: reg 18 io port: [0x4100-0x4107]
[ 0.150934] pci 0000:00:1f.2: reg 1c io port: [0x4118-0x411b]
[ 0.150943] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
[ 0.150952] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd4405000-0xd44057ff]
[ 0.151005] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.151010] pci 0000:00:1f.2: PME# disabled
[ 0.151053] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd4406000-0xd44060ff]
[ 0.151074] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
[ 0.151148] pci 0000:00:1f.6: reg 10 64bit mmio: [0xd4404000-0xd4404fff]
[ 0.151287] pci 0000:01:00.0: reg 10 64bit mmio: [0xd3400000-0xd343ffff]
[ 0.151299] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.151383] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.151390] pci 0000:01:00.0: PME# disabled
[ 0.151472] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.151478] pci 0000:00:1c.0: bridge 32bit mmio: [0xd3400000-0xd43fffff]
[ 0.151487] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0400000-0xd13fffff]
[ 0.151619] pci 0000:02:00.0: reg 10 64bit mmio: [0xd2400000-0xd2401fff]
[ 0.151760] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.151787] pci 0000:02:00.0: PME# disabled
[ 0.151888] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.151895] pci 0000:00:1c.1: bridge 32bit mmio: [0xd2400000-0xd33fffff]
[ 0.151904] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd1400000-0xd23fffff]
[ 0.151966] pci 0000:00:1e.0: transparent bridge
[ 0.152007] pci_bus 0000:00: on NUMA node 0
[ 0.152017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.152395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.152476] ACPI Warning for \_SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20090903/nspredef-433)
[ 0.152570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.152716] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.178288] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178687] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.178882] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179076] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.179271] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.179465] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179658] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.179808] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.179820] vgaarb: loaded
[ 0.179958] SCSI subsystem initialized
[ 0.180009] libata version 3.00 loaded.
[ 0.180086] usbcore: registered new interface driver usbfs
[ 0.180101] usbcore: registered new interface driver hub
[ 0.180132] usbcore: registered new device driver usb
[ 0.180370] ACPI: WMI: Mapper loaded
[ 0.180372] PCI: Using ACPI for IRQ routing
[ 0.180610] NetLabel: Initializing
[ 0.180612] NetLabel: domain hash size = 128
[ 0.180615] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.180628] NetLabel: unlabeled traffic allowed by default
[ 0.180663] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.180671] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.180677] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.184021] Switching to clocksource tsc
[ 0.186381] AppArmor: AppArmor Filesystem Enabled
[ 0.186392] pnp: PnP ACPI init
[ 0.186401] ACPI: bus type pnp registered
[ 0.189097] pnp: PnP ACPI: found 9 devices
[ 0.189101] ACPI: ACPI bus type pnp unregistered
[ 0.189105] PnPBIOS: Disabled by ACPI PNP
[ 0.189117] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 0.189122] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.189126] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.189130] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.189134] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.189138] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.189141] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.189145] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.189150] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.189154] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.189159] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.189163] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.189167] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.189171] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.189175] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.189180] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.189184] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.189188] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.189192] system 00:01: iomem range 0xff800000-0xff800fff has been reserved
[ 0.223934] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.223939] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.223954] pci 0000:00:1c.0: MEM window: 0xd3400000-0xd43fffff
[ 0.223960] pci 0000:00:1c.0: PREFETCH window: 0x000000d0400000-0x000000d13fffff
[ 0.223970] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.223974] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.223981] pci 0000:00:1c.1: MEM window: 0xd2400000-0xd33fffff
[ 0.223988] pci 0000:00:1c.1: PREFETCH window: 0x000000d1400000-0x000000d23fffff
[ 0.223997] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.223999] pci 0000:00:1e.0: IO window: disabled
[ 0.224006] pci 0000:00:1e.0: MEM window: disabled
[ 0.224012] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.224030] alloc irq_desc for 16 on node -1
[ 0.224032] alloc kstat_irqs on node -1
[ 0.224039] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224046] pci 0000:00:1c.0: setting latency timer to 64
[ 0.224058] alloc irq_desc for 17 on node -1
[ 0.224060] alloc kstat_irqs on node -1
[ 0.224065] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.224071] pci 0000:00:1c.1: setting latency timer to 64
[ 0.224080] pci 0000:00:1e.0: setting latency timer to 64
[ 0.224085] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.224089] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.224093] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.224096] pci_bus 0000:01: resource 1 mem: [0xd3400000-0xd43fffff]
[ 0.224100] pci_bus 0000:01: resource 2 pref mem [0xd0400000-0xd13fffff]
[ 0.224103] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.224107] pci_bus 0000:02: resource 1 mem: [0xd2400000-0xd33fffff]
[ 0.224110] pci_bus 0000:02: resource 2 pref mem [0xd1400000-0xd23fffff]
[ 0.224114] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.224117] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.224154] NET: Registered protocol family 2
[ 0.224256] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.224598] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.225037] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225259] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.225262] TCP reno registered
[ 0.225342] NET: Registered protocol family 1
[ 0.225360] pci 0000:00:02.0: Boot video device
[ 1.824010] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.424010] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.424175] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 3.424178] Simple Boot Flag at 0x44 set to 0x1
[ 3.424295] cpufreq-nforce2: No nForce2 chipset.
[ 3.424325] Scanning for low memory corruption every 60 seconds
[ 3.424444] audit: initializing netlink socket (disabled)
[ 3.424456] type=2000 audit(1314643585.424:1): initialized
[ 3.438929] Trying to unpack rootfs image as initramfs...
[ 3.456329] highmem bounce pool size: 64 pages
[ 3.456336] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 3.458070] VFS: Disk quotas dquot_6.5.2
[ 3.458136] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.464191] fuse init (API version 7.13)
[ 3.464301] msgmni has been set to 1595
[ 3.464527] alg: No test for stdrng (krng)
[ 3.464592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.464596] io scheduler noop registered
[ 3.464598] io scheduler anticipatory registered
[ 3.464601] io scheduler deadline registered
[ 3.464652] io scheduler cfq registered (default)
[ 3.464826] alloc irq_desc for 24 on node -1
[ 3.464829] alloc kstat_irqs on node -1
[ 3.464843] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.464856] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.465032] alloc irq_desc for 25 on node -1
[ 3.465034] alloc kstat_irqs on node -1
[ 3.465045] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.465057] pcieport 0000:00:1c.1: setting latency timer to 64
[ 3.465173] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.465329] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.466278] ACPI: AC Adapter [ADP1] (on-line)
[ 3.466350] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 3.467584] ACPI: Lid Switch [LID0]
[ 3.467640] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 3.467648] ACPI: Sleep Button [SLPB]
[ 3.467714] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.467717] ACPI: Power Button [PWRF]
[ 3.472367] Monitor-Mwait will be used to enter C-1 state
[ 3.472398] Monitor-Mwait will be used to enter C-2 state
[ 3.476017] Monitor-Mwait will be used to enter C-3 state
[ 3.476026] Marking TSC unstable due to TSC halts in idle
[ 3.476075] processor LNXCPU:00: registered as cooling_device0
[ 3.477960] Switching to clocksource hpet
[ 3.495913] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.495924] ACPI: Thermal Zone [TZS0] (54 C)
[ 3.502201] thermal LNXTHERM:02: registered as thermal_zone1
[ 3.502210] ACPI: Thermal Zone [TZS1] (54 C)
[ 3.504105] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.505691] brd: module loaded
[ 3.506233] loop: module loaded
[ 3.506334] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 3.506842] Fixed MDIO Bus: probed
[ 3.506888] PPP generic driver version 2.4.2
[ 3.506932] tun: Universal TUN/TAP device driver, 1.6
[ 3.506934] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.507033] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.507060] alloc irq_desc for 19 on node -1
[ 3.507063] alloc kstat_irqs on node -1
[ 3.507070] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 3.507085] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.507090] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.507126] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.507164] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.511045] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.516415] isapnp: Scanning for PnP cards...
[ 3.523371] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd4405c00
[ 3.588543] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.588652] usb usb1: configuration #1 chosen from 1 choice
[ 3.588691] hub 1-0:1.0: USB hub found
[ 3.588701] hub 1-0:1.0: 4 ports detected
[ 3.588767] alloc irq_desc for 23 on node -1
[ 3.588770] alloc kstat_irqs on node -1
[ 3.588776] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.588796] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.588800] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.588842] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.588877] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.592774] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.594573] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd4405800
[ 3.612043] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.612158] usb usb2: configuration #1 chosen from 1 choice
[ 3.612192] hub 2-0:1.0: USB hub found
[ 3.612202] hub 2-0:1.0: 8 ports detected
[ 3.612276] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.612295] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.612335] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.612345] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.612350] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.612387] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.612430] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 3.612536] usb usb3: configuration #1 chosen from 1 choice
[ 3.612567] hub 3-0:1.0: USB hub found
[ 3.612575] hub 3-0:1.0: 2 ports detected
[ 3.612629] alloc irq_desc for 21 on node -1
[ 3.612632] alloc kstat_irqs on node -1
[ 3.612638] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.612646] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.612650] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.612686] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.612723] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 3.612835] usb usb4: configuration #1 chosen from 1 choice
[ 3.612866] hub 4-0:1.0: USB hub found
[ 3.612874] hub 4-0:1.0: 2 ports detected
[ 3.612923] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.612931] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.612935] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.612972] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.613002] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 3.613104] usb usb5: configuration #1 chosen from 1 choice
[ 3.613135] hub 5-0:1.0: USB hub found
[ 3.613143] hub 5-0:1.0: 2 ports detected
[ 3.613201] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.613209] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.613213] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.613248] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.613278] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 3.613414] usb usb6: configuration #1 chosen from 1 choice
[ 3.613445] hub 6-0:1.0: USB hub found
[ 3.613455] hub 6-0:1.0: 2 ports detected
[ 3.613505] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.613512] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.613517] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.613554] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.613584] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[ 3.613684] usb usb7: configuration #1 chosen from 1 choice
[ 3.613715] hub 7-0:1.0: USB hub found
[ 3.613722] hub 7-0:1.0: 2 ports detected
[ 3.613771] alloc irq_desc for 18 on node -1
[ 3.613774] alloc kstat_irqs on node -1
[ 3.613779] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.613786] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.613791] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.613831] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 3.613868] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 3.613966] usb usb8: configuration #1 chosen from 1 choice
[ 3.613999] hub 8-0:1.0: USB hub found
[ 3.614006] hub 8-0:1.0: 2 ports detected
[ 3.614115] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.643402] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 3.712991] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.713000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 3.713040] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 3.713070] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 3.713096] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 3.713236] mice: PS/2 mouse device common for all mice
[ 3.714318] rtc_cmos 00:03: RTC can wake from S4
[ 3.714366] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.714400] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.714533] device-mapper: uevent: version 1.0.3
[ 3.716251] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.717903] device-mapper: multipath: version 1.1.0 loaded
[ 3.717907] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.719145] EISA: Probing bus 0 at eisa.0
[ 3.719160] Cannot allocate resource for EISA slot 2
[ 3.719163] Cannot allocate resource for EISA slot 3
[ 3.719165] Cannot allocate resource for EISA slot 4
[ 3.719187] EISA: Detected 0 cards.
[ 3.721787] cpuidle: using governor ladder
[ 3.721859] cpuidle: using governor menu
[ 3.722328] TCP cubic registered
[ 3.722522] NET: Registered protocol family 10
[ 3.723454] NET: Registered protocol family 17
[ 3.723863] Using IPI No-Shortcut mode
[ 3.723945] PM: Resume from disk failed.
[ 3.723958] registered taskstats version 1
[ 3.724615] Magic number: 7:338:798
[ 3.724697] rtc_cmos 00:03: setting system clock to 2011-08-29 18:46:26 UTC (1314643586)
[ 3.724701] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.724703] EDD information not available.
[ 3.743634] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.971817] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 4.170236] usb 2-2: configuration #1 chosen from 1 choice
[ 4.235733] isapnp: No Plug & Play device found
[ 4.294475] ACPI: Battery Slot [BAT0] (battery present)
[ 4.352207] usb 2-5: new high speed USB device using ehci_hcd and address 4
[ 4.545599] Freeing initrd memory: 17988k freed
[ 4.554271] Freeing unused kernel memory: 684k freed
[ 4.554732] Write protecting the kernel text: 4832k
[ 4.554804] Write protecting the kernel read-only data: 1884k
[ 4.574247] usb 2-5: configuration #1 chosen from 1 choice
[ 4.582448] ramzswap: disk size set to 2023464 kB
[ 4.591646] udev: starting version 151
[ 4.652427] Adding 2023460k swap on /dev/ramzswap0. Priority:100 extents:1 across:2023460k SS
[ 4.816052] usb 6-1: new low speed USB device using uhci_hcd and address 2
[ 4.865240] Linux agpgart interface v0.103
[ 4.870341] ahci 0000:00:1f.2: version 3.0
[ 4.870363] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.870412] alloc irq_desc for 26 on node -1
[ 4.870414] alloc kstat_irqs on node -1
[ 4.870427] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 4.870482] ahci: SSS flag set, parallel bus scan disabled
[ 4.870526] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.870531] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[ 4.870538] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.892151] scsi0 : ahci
[ 4.892334] scsi1 : ahci
[ 4.892461] scsi2 : ahci
[ 4.892595] scsi3 : ahci
[ 4.892719] scsi4 : ahci
[ 4.892846] scsi5 : ahci
[ 4.893234] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 26
[ 4.893239] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 26
[ 4.893242] ata3: DUMMY
[ 4.893244] ata4: DUMMY
[ 4.893248] ata5: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405300 irq 26
[ 4.893252] ata6: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405380 irq 26
[ 4.893401] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 4.894301] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 4.931623] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 4.996420] usb 6-1: configuration #1 chosen from 1 choice
[ 5.240107] ata1: SATA link down (SStatus 0 SControl 300)
[ 5.740106] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.741604] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.742053] ata2.00: ATA-8: Hitachi HTS545032B9A300, PB3OC60F, max UDMA/133
[ 5.742058] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.744667] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.745157] ata2.00: configured for UDMA/133
[ 5.760172] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 5.760330] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.760660] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 5.760720] sd 1:0:0:0: [sda] Write Protect is off
[ 5.760724] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.760755] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.760915] sda: sda1 sda2 < sda5 sda6 > sda3
[ 5.812626] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.648102] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.653318] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6.653325] ata5.00: ATAPI: HL-DT-ST DVDRAM GU10N, AP03, max UDMA/133
[ 6.658811] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 6.658857] ata5.00: configured for UDMA/133
[ 6.679296] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N AP03 PQ: 0 ANSI: 5
[ 6.690505] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.690510] Uniform CD-ROM driver Revision: 3.20
[ 6.690611] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.690667] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 7.008106] ata6: SATA link down (SStatus 0 SControl 300)
[ 7.067138] [drm] Initialized drm 1.1.0 20060810
[ 7.074096] usbcore: registered new interface driver hiddev
[ 7.099842] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input5
[ 7.099952] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.1-1/input0
[ 7.099977] usbcore: registered new interface driver usbhid
[ 7.099981] usbhid: v2.6:USB HID core driver
[ 7.101736] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.101743] i915 0000:00:02.0: setting latency timer to 64
[ 7.117269] alloc irq_desc for 27 on node -1
[ 7.117273] alloc kstat_irqs on node -1
[ 7.117283] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 7.117291] [drm] set up 63M of stolen space
[ 7.779830] fb0: inteldrmfb frame buffer device
[ 7.779834] registered panic notifier
[ 7.797780] acpi device:01: registered as cooling_device1
[ 7.798625] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 7.798713] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 7.798888] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.803660] vga16fb: initializing
[ 7.803665] vga16fb: mapped to 0xc00a0000
[ 7.803669] vga16fb: not registering due to another framebuffer present
[ 8.181648] Console: switching to colour frame buffer device 170x48
[ 10.395071] xor: automatically using best checksumming function: pIII_sse
[ 10.412011] pIII_sse : 5338.000 MB/sec
[ 10.412014] xor: using function: pIII_sse (5338.000 MB/sec)
[ 10.421940] device-mapper: dm-raid45: initialized v0.2594b
[ 10.617359] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 26.319017] Adding 3999736k swap on /dev/sda5. Priority:-1 extents:1 across:3999736k
[ 26.380970] udev: starting version 151
[ 26.522669] lp: driver loaded but no devices found
[ 26.845624] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 26.845639] atl1c 0000:01:00.0: setting latency timer to 64
[ 26.968882] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 27.032543] cfg80211: Calling CRDA to update world regulatory domain
[ 27.050908] Linux video capture interface: v2.00
[ 27.077468] cfg80211: World regulatory domain updated:
[ 27.077473] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.077477] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.077481] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.077484] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.077488] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.077491] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.081654] uvcvideo: Found UVC 1.00 device HD Video WebCam (064e:a133)
[ 27.084340] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 27.094646] input: HD Video WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input7
[ 27.094711] usbcore: registered new interface driver uvcvideo
[ 27.094715] USB Video Class driver (v0.1.0)
[ 27.130484] acer-wmi: Brightness must be controlled by generic video driver
[ 27.264639] type=1505 audit(1314632810.039:2): operation="profile_load" pid=678 name="/sbin/dhclient3"
[ 27.266024] type=1505 audit(1314632810.039:3): operation="profile_load" pid=678 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 27.266884] type=1505 audit(1314632810.039:4): operation="profile_load" pid=678 name="/usr/lib/connman/scripts/dhclient-script"
[ 27.474137] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k
[ 27.474142] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 27.474247] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 27.474285] iwlagn 0000:02:00.0: setting latency timer to 64
[ 27.474357] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 27.553778] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 27.553887] alloc irq_desc for 28 on node -1
[ 27.553891] alloc kstat_irqs on node -1
[ 27.553912] iwlagn 0000:02:00.0: irq 28 for MSI/MSI-X
[ 27.603694] alloc irq_desc for 22 on node -1
[ 27.603698] alloc kstat_irqs on node -1
[ 27.603707] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 27.603749] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 27.611869] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 27.736172] hda_codec: ALC269: BIOS auto-probing.
[ 27.736657] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 27.985543] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000
[ 28.001869] type=1505 audit(1314632810.775:5): operation="profile_load" pid=875 name="/usr/share/gdm/guest-session/Xsession"
[ 28.008714] type=1505 audit(1314632810.783:6): operation="profile_replace" pid=876 name="/sbin/dhclient3"
[ 28.009743] type=1505 audit(1314632810.783:7): operation="profile_replace" pid=876 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 28.010314] type=1505 audit(1314632810.783:8): operation="profile_replace" pid=876 name="/usr/lib/connman/scripts/dhclient-script"
[ 28.043020] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 28.087975] type=1505 audit(1314632810.859:9): operation="profile_load" pid=877 name="/usr/bin/evince"
[ 28.137464] alloc irq_desc for 29 on node -1
[ 28.137469] alloc kstat_irqs on node -1
[ 28.137488] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[ 28.137866] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.151999] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 28.159661] type=1505 audit(1314632810.931:10): operation="profile_load" pid=877 name="/usr/bin/evince-previewer"
[ 28.171882] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
[ 28.181812] type=1505 audit(1314632810.955:11): operation="profile_load" pid=877 name="/usr/bin/evince-thumbnailer"
[ 28.336317] Registered led device: iwl-phy0::radio
[ 28.336343] Registered led device: iwl-phy0::assoc
[ 28.336362] Registered led device: iwl-phy0::RX
[ 28.336381] Registered led device: iwl-phy0::TX
[ 28.339775] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.557493] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 28.557636] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.346334] ppdev: user-space parallel port driver
[ 39.000015] eth0: no IPv6 routers present

user@giannakoZ:~$

lsmod:

Κώδικας: Επιλογή όλων

user@giannakoZ:~$ lsmod
Module Size Used by
binfmt_misc 6587 1
ppdev 5259 0
joydev 8740 0
dm_crypt 11331 0
snd_hda_codec_intelhdmi 11622 1
snd_hda_codec_realtek 203376 1
snd_hda_intel 22165 2
arc4 1153 2
snd_hda_codec 74201 3 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70918 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
iwlagn 107199 0
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
iwlcore 106661 1 iwlagn
mac80211 205402 2 iwlagn,iwlcore
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
acer_wmi 13861 0
uvcvideo 57406 0
led_class 2864 2 iwlcore,acer_wmi
snd 54244 17 snd_hda_codec_intelhdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
videodev 34361 1 uvcvideo
v4l1_compat 13251 2 uvcvideo,videodev
psmouse 63677 0
serio_raw 3978 0
cfg80211 126144 3 iwlagn,iwlcore,mac80211
atl1c 28211 0
soundcore 6620 1 snd
snd_page_alloc 7172 2 snd_hda_intel,snd_pcm
lp 7028 0
parport 32635 2 ppdev,lp
dm_raid45 81647 0
xor 15028 1 dm_raid45
fbcon 35102 71
tileblit 1999 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
i915 289443 3
drm_kms_helper 29361 1 i915
usbhid 36206 0
drm 163066 4 i915,drm_kms_helper
hid 67288 1 usbhid
i2c_algo_bit 5028 1 i915
intel_agp 24671 2 i915
ahci 32392 2
agpgart 31788 2 drm,intel_agp
video 17375 1 i915
output 1871 1 video
ramzswap 6362 1
xvmalloc 4074 1 ramzswap
lzo_decompress 2189 1 ramzswap
lzo_compress 1853 1 ramzswap
user@giannakoZ:~$

*όταν συνδέω την κάρτα με vista ανάβει το λαμπάκι, όταν συνεω με linux δεν ανάβει τίποτα.

[clepto]

κάνε επεξεργασία και βάλε τον κώδικα μέσα σε

Κώδικας: Επιλογή όλων

[code][/code]

γιατί έτσι δεν διαβάζεται, είναι κουραστικό και άσχημο...

[gianniskoz]

κάνε επεξεργασία και βάλε τον κώδικα μέσα σε

Κώδικας: Επιλογή όλων

[code][/code]

γιατί έτσι δεν διαβάζεται, είναι κουραστικό και άσχημο...

έχεις δίκιο. sry
*κάτι έπαθε το tvtime και όταν πάω να το ανοίξω κλείνει αστραπιαία

[vagrale13]

@gianniskoz
Εχεις κανει λαθος την πρωτη εντολη.... δωσε παλι το αποτελεσμα (κανε αντιγραφη-επικολληση)

Κώδικας: Επιλογή όλων

lsusb

[gianniskoz]

Κώδικας: Επιλογή όλων

user@giannakoZ:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 005: ID 07ca:0830 AVerMedia Technologies, Inc.
Bus 002 Device 004: ID 064e:a133 Suyin Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
user@giannakoZ:~$

[vagrale13]

Ωραια... ενημερωτικα, η καρτα σου ειναι αυτη

Κώδικας: Επιλογή όλων

Bus 002 Device 005: ID 07ca:0830 AVerMedia Technologies, Inc.

γενικα, δεν ειναι καλη η υποστηριξη της στο Linux και το ελευθερο λογισμικο. Σε αυτο δεν φταιει το Ubuntu και το Linux γενικοτερα.

Τωρα, αν και δεν γνωριζω τις γνωσεις σου, καλο ειναι να φτιαξεις την υπογραφη σου, δες εδω http://wiki.ubuntu-gr.org/Ubuntu-grForumSignature
δοκιμασε οτι λεει εδω http://www.iecn.u-nancy.fr/~garet/linux ... debian.php
και δες αν μετα λειτουργει σωστα!
Αν δεν γνωριζεις τι πρεπει να κανεις, πες μας να το γραψουμε αναλυτικα!

[the_eye]

Βλέπω η εταιρία έχει βγάλει driver για linux. Ευχάριστα νέα αυτά !

http://www.avermedia.com/avertv/Product ... b=APDriver

Κατέβασε τον driver, αποσυμπίεσέ τον και τρέξε το script (sh)

[dim459]

Eίναι από τις εταιρείες που συνήθως παρέχουν drivers για linux, σε ανάλογη κάρτα είχε μέσα όχι μόνο τον driver, αλλά αναλυτικότατο readme και επιπλέον οδηγό χρήσης με διάφορες linux εφαρμογές, γνωστά προβλήματα και workarounds.
Τι άλλο να ζητήσει κανείς, απλά τους είχα στείλει ένα mail με συγχαρητήρια, στο οποίο μάλιστα απάντησαν με ευχαριστίες ! Εντυπωσιασμένος !