01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV630 [Radeon HD 2600 Series] [1002:9589]
Desktop effects could not be enabled , το δευτερο monitor δεν ρυθμίζετε, η προσπάθεια για google earth ήταν ανεπιτυχής, στο skype δεν έχω κάμερα
Bus 014 Device 002: ID 046d:08ad Logitech, Inc. QuickCam Communicate STX ούτε την
Bus 005 Device 003: ID 041e:4052 Creative Technology, Ltd Live! Cam Vista IM,
ούτε ενα usb2.0 http://us.kworld-global.com/main/prod_i ... prodid=104 για Captures video from VHS, V8, Hi8, etc που έχω επάνω. Bus 004 Device 002: ID eb1a:2820 eMPIA Technology, Inc.
Κατά τ' άλλα για πρώτη επαφή με linux ...καλά!
lsusb
- Κώδικας: Επιλογή όλων
Bus 004 Device 002: ID eb1a:2820 eMPIA Technology, Inc.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 014 Device 002: ID 046d:08ad Logitech, Inc. QuickCam Communicate STX
Bus 014 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 011 Device 002: ID 03f0:7204 Hewlett-Packard DeskJet 36xx
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 041e:4052 Creative Technology, Ltd Live! Cam Vista IM
Bus 005 Device 002: ID 056a:0064 Wacom Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
- Κώδικας: Επιλογή όλων
[ 1.037596] io scheduler noop registered
[ 1.037598] io scheduler anticipatory registered
[ 1.037600] io scheduler deadline registered
[ 1.037610] io scheduler cfq registered (default)
[ 1.037730] pci 0000:01:00.0: Boot video device
[ 1.039751] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.039778] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.039796] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.039804] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.039817] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.039854] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.039882] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.039902] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.039911] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.039921] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.039930] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.039975] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.040003] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.040023] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 1.040032] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.040042] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.040053] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.040098] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.040126] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.040146] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 1.040155] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.040165] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.040175] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.040229] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.040591] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.040706] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.040708] ACPI: Power Button (FF) [PWRF]
[ 1.040748] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.040750] ACPI: Power Button (CM) [PWRB]
[ 1.041157] ACPI: SSDT 7FF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
[ 1.041425] processor ACPI_CPU:00: registered as cooling_device0
[ 1.041644] ACPI: SSDT 7FF8E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113)
[ 1.041896] processor ACPI_CPU:01: registered as cooling_device1
[ 1.043931] isapnp: Scanning for PnP cards...
[ 1.396747] isapnp: No Plug & Play device found
[ 1.404699] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.404787] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.405138] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.405757] brd: module loaded
[ 1.405999] loop: module loaded
[ 1.406050] Fixed MDIO Bus: probed
[ 1.406053] PPP generic driver version 2.4.2
[ 1.406095] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.406118] Driver 'sd' needs updating - please use bus_type methods
[ 1.406125] Driver 'sr' needs updating - please use bus_type methods
[ 1.406160] ahci 0000:03:00.0: version 3.0
[ 1.406193] ata_piix 0000:00:1f.2: version 2.12
[ 1.406204] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.406207] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.406239] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.406283] scsi0 : ata_piix
[ 1.406345] scsi1 : ata_piix
[ 1.407413] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 1.407416] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 1.880056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.901634] ata1.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 1.901636] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.916815] ata1.00: configured for UDMA/133
[ 2.392055] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.427586] ata2.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 2.427588] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.433062] ata2.00: configured for UDMA/133
[ 2.433151] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 2.433240] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.433253] sd 0:0:0:0: [sda] Write Protect is off
[ 2.433255] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.433275] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.433322] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.433333] sd 0:0:0:0: [sda] Write Protect is off
[ 2.433335] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.433355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.433358] sda: sda1 sda2 < sda5 >
[ 2.461974] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.462011] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.462076] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 2.462140] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.462152] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.462154] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.462173] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.462217] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.462229] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.462231] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.462250] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.462253] sdb: sdb1
[ 2.469196] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.469229] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.469245] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.469248] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.469281] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.469319] scsi2 : ata_piix
[ 2.469365] scsi3 : ata_piix
[ 2.470341] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 2.470344] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 2.944065] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.962584] ata3.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 2.962586] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.968585] ata3.00: configured for UDMA/133
[ 3.298571] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.298635] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 3.298700] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.298712] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.298714] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.298734] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.298775] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.298787] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.298789] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.298808] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.298811] sdc: sdc1
[ 3.304201] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.304235] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.304616] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.304637] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 3.304680] scsi4 : pata_marvell
[ 3.304723] scsi5 : pata_marvell
[ 3.304751] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 3.304753] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 3.476417] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[ 3.476448] ata5.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 3.492439] ata5.00: configured for UDMA/66
[ 3.508394] ata5.01: configured for UDMA/33
[ 3.676218] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
[ 3.679591] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.679594] Uniform CD-ROM driver Revision: 3.20
[ 3.679672] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.679706] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 3.680261] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 3.683921] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 3.683977] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 3.684013] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 3.684238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.684253] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.684267] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.684269] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.684312] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.688202] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.688207] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.688217] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 3.700024] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.700087] usb usb1: configuration #1 chosen from 1 choice
[ 3.700112] hub 1-0:1.0: USB hub found
[ 3.700119] hub 1-0:1.0: 6 ports detected
[ 3.700217] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.700225] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.700228] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.700263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.704165] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.704170] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.704179] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 3.716024] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.716073] usb usb2: configuration #1 chosen from 1 choice
[ 3.716098] hub 2-0:1.0: USB hub found
[ 3.716104] hub 2-0:1.0: 6 ports detected
[ 3.716192] ehci_hcd 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.716206] ehci_hcd 0000:05:00.2: EHCI Host Controller
[ 3.716237] ehci_hcd 0000:05:00.2: new USB bus registered, assigned bus number 3
[ 3.716262] ehci_hcd 0000:05:00.2: irq 18, io mem 0xfebff400
[ 3.728014] ehci_hcd 0000:05:00.2: USB 2.0 started, EHCI 1.00
[ 3.728069] usb usb3: configuration #1 chosen from 1 choice
[ 3.728092] hub 3-0:1.0: USB hub found
[ 3.728097] hub 3-0:1.0: 4 ports detected
[ 3.728172] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.728182] ehci_hcd 0000:05:01.2: EHCI Host Controller
[ 3.728221] ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 4
[ 3.728251] ehci_hcd 0000:05:01.2: irq 19, io mem 0xfebff000
[ 3.740014] ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00
[ 3.740061] usb usb4: configuration #1 chosen from 1 choice
[ 3.740083] hub 4-0:1.0: USB hub found
[ 3.740089] hub 4-0:1.0: 4 ports detected
[ 3.740167] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.740183] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.740204] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.740208] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.740211] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.740244] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 3.740263] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 3.740319] usb usb5: configuration #1 chosen from 1 choice
[ 3.740338] hub 5-0:1.0: USB hub found
[ 3.740343] hub 5-0:1.0: 2 ports detected
[ 3.740405] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.740410] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.740412] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.740445] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 3.740470] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 3.740529] usb usb6: configuration #1 chosen from 1 choice
[ 3.740548] hub 6-0:1.0: USB hub found
[ 3.740553] hub 6-0:1.0: 2 ports detected
[ 3.740617] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.740622] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.740624] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.740663] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 3.740682] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 3.740735] usb usb7: configuration #1 chosen from 1 choice
[ 3.740754] hub 7-0:1.0: USB hub found
[ 3.740758] hub 7-0:1.0: 2 ports detected
[ 3.740822] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.740827] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.740829] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.740861] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 3.740879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 3.740935] usb usb8: configuration #1 chosen from 1 choice
[ 3.740954] hub 8-0:1.0: USB hub found
[ 3.740960] hub 8-0:1.0: 2 ports detected
[ 3.741023] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.741027] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.741030] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.741065] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 3.741083] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 3.741136] usb usb9: configuration #1 chosen from 1 choice
[ 3.741156] hub 9-0:1.0: USB hub found
[ 3.741161] hub 9-0:1.0: 2 ports detected
[ 3.741225] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.741230] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.741232] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.741264] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 3.741283] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 3.741337] usb usb10: configuration #1 chosen from 1 choice
[ 3.741358] hub 10-0:1.0: USB hub found
[ 3.741367] hub 10-0:1.0: 2 ports detected
[ 3.741437] uhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.741442] uhci_hcd 0000:05:00.0: UHCI Host Controller
[ 3.741480] uhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[ 3.741499] uhci_hcd 0000:05:00.0: irq 16, io base 0x0000e800
[ 3.741561] usb usb11: configuration #1 chosen from 1 choice
[ 3.741580] hub 11-0:1.0: USB hub found
[ 3.741585] hub 11-0:1.0: 2 ports detected
[ 3.741649] uhci_hcd 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.741654] uhci_hcd 0000:05:00.1: UHCI Host Controller
[ 3.741689] uhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 12
[ 3.741714] uhci_hcd 0000:05:00.1: irq 17, io base 0x0000e880
[ 3.741767] usb usb12: configuration #1 chosen from 1 choice
[ 3.741787] hub 12-0:1.0: USB hub found
[ 3.741792] hub 12-0:1.0: 2 ports detected
[ 3.741859] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.741864] uhci_hcd 0000:05:01.0: UHCI Host Controller
[ 3.741898] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 13
[ 3.741917] uhci_hcd 0000:05:01.0: irq 17, io base 0x0000e400
[ 3.741970] usb usb13: configuration #1 chosen from 1 choice
[ 3.741992] hub 13-0:1.0: USB hub found
[ 3.741997] hub 13-0:1.0: 2 ports detected
[ 3.742064] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 3.742069] uhci_hcd 0000:05:01.1: UHCI Host Controller
[ 3.742104] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 14
[ 3.742123] uhci_hcd 0000:05:01.1: irq 18, io base 0x0000e480
[ 3.742180] usb usb14: configuration #1 chosen from 1 choice
[ 3.742200] hub 14-0:1.0: USB hub found
[ 3.742204] hub 14-0:1.0: 2 ports detected
[ 3.742319] usbcore: registered new interface driver libusual
[ 3.742343] usbcore: registered new interface driver usbserial
[ 3.742352] USB Serial support registered for generic
[ 3.742368] usbcore: registered new interface driver usbserial_generic
[ 3.742369] usbserial: USB Serial Driver core
[ 3.742408] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.742410] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.742890] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.744553] mice: PS/2 mouse device common for all mice
[ 3.756577] rtc_cmos 00:03: RTC can wake from S4
[ 3.756606] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.756628] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.756683] device-mapper: uevent: version 1.0.3
[ 3.756753] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.756808] device-mapper: multipath: version 1.0.5 loaded
[ 3.756810] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.756866] EISA: Probing bus 0 at eisa.0
[ 3.756889] EISA: Detected 0 cards.
[ 3.756924] cpuidle: using governor ladder
[ 3.756926] cpuidle: using governor menu
[ 3.757325] TCP cubic registered
[ 3.757401] NET: Registered protocol family 10
[ 3.757741] lo: Disabled Privacy Extensions
[ 3.758003] NET: Registered protocol family 17
[ 3.758017] Bluetooth: L2CAP ver 2.11
[ 3.758018] Bluetooth: L2CAP socket layer initialized
[ 3.758021] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.758022] Bluetooth: SCO socket layer initialized
[ 3.758042] Bluetooth: RFCOMM socket layer initialized
[ 3.758045] Bluetooth: RFCOMM TTY layer initialized
[ 3.758047] Bluetooth: RFCOMM ver 1.10
[ 3.758455] Using IPI No-Shortcut mode
[ 3.758508] registered taskstats version 1
[ 3.758625] Magic number: 5:852:511
[ 3.758674] rtc_cmos 00:03: setting system clock to 2009-04-29 02:32:12 UTC (1240972332)
[ 3.758676] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.758678] EDD information not available.
[ 3.758848] Freeing unused kernel memory: 532k freed
[ 3.758945] Write protecting the kernel text: 4128k
[ 3.758979] Write protecting the kernel read-only data: 1532k
[ 3.779075] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.926211] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.926221] atl1 0000:02:00.0: setting latency timer to 64
[ 3.926247] atl1 0000:02:00.0: version 2.1.3
[ 3.962636] Floppy drive(s): fd0 is 1.44M
[ 3.980213] FDC 0 is a post-1991 82077
[ 3.995150] ohci1394 0000:05:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.047847] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.276022] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 4.358724] PM: Starting manual resume from disk
[ 4.358727] PM: Resume from partition 8:5
[ 4.358728] PM: Checking hibernation image.
[ 4.358885] PM: Resume from disk failed.
[ 4.397268] kjournald starting. Commit interval 5 seconds
[ 4.397276] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.413241] usb 2-3: configuration #1 chosen from 1 choice
[ 4.416673] Initializing USB Mass Storage driver...
[ 4.416783] scsi6 : SCSI emulation for USB Mass Storage devices
[ 4.416878] usb-storage: device found at 2
[ 4.416880] usb-storage: waiting for device to settle before scanning
[ 4.416886] usbcore: registered new interface driver usb-storage
[ 4.416888] USB Mass Storage support registered.
[ 4.748019] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 4.880385] usb 4-2: configuration #1 chosen from 1 choice
[ 5.236036] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 5.324097] ieee1394: Host added: ID:BUS[0-00:1023] GUID[20000000030008a6]
[ 5.409528] usb 5-1: configuration #1 chosen from 1 choice
[ 5.652011] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.839557] usb 5-2: configuration #1 chosen from 1 choice
[ 6.080020] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 6.255022] usb 7-1: configuration #1 chosen from 1 choice
[ 6.496010] usb 11-1: new full speed USB device using uhci_hcd and address 2
[ 6.680962] usb 11-1: configuration #1 chosen from 1 choice
[ 6.924011] usb 11-2: new full speed USB device using uhci_hcd and address 3
[ 7.083010] usb 11-2: configuration #1 chosen from 1 choice
[ 7.324020] usb 14-2: new full speed USB device using uhci_hcd and address 2
[ 7.511711] usb 14-2: configuration #1 chosen from 1 choice
[ 8.353934] udev: starting version 141
[ 8.484183] Linux video capture interface: v2.00
[ 8.509446] usbcore: registered new interface driver hiddev
[ 8.523170] gspca: main v2.3.0 registered
[ 8.524219] gspca: probing 041e:4052
[ 8.524479] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.0/input/input4
[ 8.534023] input: Wacom PenPartner2 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/input/input5
[ 8.548148] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.2-1/input0
[ 8.548170] usbcore: registered new interface driver usbhid
[ 8.548189] usbhid: v2.6:USB HID core driver
[ 8.557312] Linux agpgart interface v0.103
[ 8.572357] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.615822] usbcore: registered new interface driver wacom
[ 8.615825] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver
[ 8.712808] ov519: I2C synced in 1 attempt(s)
[ 8.712811] ov519: starting OV7xx0 configuration
[ 8.725809] ov519: Sensor is an OV7670
[ 8.757409] gspca: probing 046d:08ad
[ 8.771895] iTCO_vendor_support: vendor-support=0
[ 8.796947] USB Serial support registered for pl2303
[ 8.796976] pl2303 11-2:1.0: pl2303 converter detected
[ 8.808270] usb 11-2: pl2303 converter now attached to ttyUSB0
[ 8.808288] usbcore: registered new interface driver pl2303
[ 8.808290] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 8.848247] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
[ 8.848262] usbcore: registered new interface driver usblp
[ 8.981950] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.982182] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 8.982257] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.262422] em28xx v4l2 driver version 0.1.0 loaded
[ 9.262450] em28xx new video device (eb1a:2820): interface 0, class 255
[ 9.262454] em28xx Doesn't have usb audio class
[ 9.262455] em28xx #0: Alternate settings: 8
[ 9.262457] em28xx #0: Alternate setting 0, max size= 0
[ 9.262459] em28xx #0: Alternate setting 1, max size= 1024
[ 9.262460] em28xx #0: Alternate setting 2, max size= 1448
[ 9.262462] em28xx #0: Alternate setting 3, max size= 2048
[ 9.262464] em28xx #0: Alternate setting 4, max size= 2304
[ 9.262466] em28xx #0: Alternate setting 5, max size= 2580
[ 9.262467] em28xx #0: Alternate setting 6, max size= 2892
[ 9.262469] em28xx #0: Alternate setting 7, max size= 3072
[ 9.262739] em28xx #0: em28xx chip ID = 18
[ 9.306922] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.306973] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.337984] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 9.371258] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.371279] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.420520] usb-storage: device scan complete
[ 9.433716] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.434962] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.436212] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.437463] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.440001] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 9.440093] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 9.441656] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 9.441739] sd 6:0:0:1: Attached scsi generic sg6 type 0
[ 9.443541] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 9.443626] sd 6:0:0:2: Attached scsi generic sg7 type 0
[ 9.445247] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 9.445324] sd 6:0:0:3: Attached scsi generic sg8 type 0
[ 9.489425] em28xx #0: board has no eeprom
[ 9.507303] em28xx #0: found i2c device @ 0x4a [saa7113h]
[ 9.540813] em28xx #0: Your board has no unique USB ID.
[ 9.540816] em28xx #0: A hint were successfully done, based on i2c devicelist hash.
[ 9.540818] em28xx #0: This method is not 100% failproof.
[ 9.540819] em28xx #0: If the board were missdetected, please email this log to:
[ 9.540821] em28xx #0: V4L Mailing List <video4linux-list@redhat.com>
[ 9.540823] em28xx #0: Board detected as PointNix Intra-Oral Camera
[ 9.540825] em28xx #0: Registering snapshot button...
[ 9.540904] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb4/4-2/input/input7
[ 10.016439] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 10.022001] gspca: probe ok
[ 10.022020] usbcore: registered new interface driver ov519
[ 10.022040] ov519: registered
[ 10.387035] zc3xx: probe 2wr ov vga 0x0000
[ 10.420001] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x002f0d00
[ 10.432050] zc3xx: probe sensor -> 11
[ 10.432053] zc3xx: Find Sensor HV7131R(c)
[ 10.437120] gspca: probe ok
[ 10.459462] usbcore: registered new interface driver snd-usb-audio
[ 10.459465] usbcore: registered new interface driver zc3xx
[ 10.459468] zc3xx: registered
[ 11.296275] em28xx #0: V4L2 device registered as /dev/video2 and /dev/vbi0
[ 11.296278] em28xx #0: Found PointNix Intra-Oral Camera
[ 11.296304] usbcore: registered new interface driver em28xx
[ 11.308122] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 11.308124] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 11.308342] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 11.461269] lp: driver loaded but no devices found
[ 11.516708] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k
[ 12.044496] EXT3 FS on sda1, internal journal
[ 13.035928] type=1505 audit(1240961541.773:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2468
[ 13.072962] type=1505 audit(1240961541.813:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2472
[ 13.073026] type=1505 audit(1240961541.813:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2472
[ 13.073056] type=1505 audit(1240961541.813:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2472
[ 13.073086] type=1505 audit(1240961541.813:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2472
[ 13.176240] type=1505 audit(1240961541.913:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2477
[ 13.176349] type=1505 audit(1240961541.913:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2477
[ 13.198256] type=1505 audit(1240961541.937:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2481
[ 19.549593] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.549596] Bluetooth: BNEP filters: protocol multicast
[ 19.588375] Bridge firewalling registered
[ 20.897711] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.050981] ppdev: user-space parallel port driver
[ 21.214231] [drm] Initialized drm 1.1.0 20060810
[ 21.322907] pci 0000:01:00.0: setting latency timer to 64
[ 21.323031] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 21.815154] [drm] Setting GART location based on new memory map
[ 21.830747] [drm] Loading RV630 CP Microcode
[ 21.830895] [drm] Loading RV630 PFP Microcode
[ 21.845806] [drm] Resetting GPU
[ 21.845861] [drm] writeback test succeeded in 1 usecs
[ 25.259067] atl1 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 25.259155] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 35.724540] eth0: no IPv6 routers present
) και μετά να ξανακάνεις εγκατάσταση τους κλειστούς οδηγούς μήπως και αλλάξει τπτ.
