Γραφικό περιβάλλον στην έναρξη

[dim459]

Έχω ένα laptop acer aspire 3004 wlmi το οποίο είναι triple boot με windows 7, debian testing και ubuntu 9.10.
H κάρτα γραφικών του σύμφωνα με το lspci είναι :
VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter.
Μετά την αναβάθμιση από 9.04 σε 9.10 αντιμετωπίζω το εξής πρόβλημα : Κατά την έναρξη (είτε μετά από restart είτε μετά από shutdown) όταν φτάνει στη login screen ακούω τον ήχο αλλά δεν έχει εικόνα (όχι πάντα αλλά τις περισσότερες φορές). Αναγκάζομαι να χρησιμοποιώ ctrl+alt+F1 και αφού κάνω login από command line στη συνέχεια να δίνω την εντολή:
sudo service gdm restart (αφού το βλέπει ήδη να τρέχει) οπότε και το γραφικό περιβάλλον επανέρχεται κανονικά βγάζοντάς με στη login screen.
To ctrl+alt+backspace το έχω ενεργοποιήσει, αλλά δουλέυει μόνο αφού έχει φορτωθεί κανονικά το γραφικό περιβάλλον και όχι τη στιγμή που βρίσκομαι στη login screen χωρίς εικόνα. Ξεκινώντας από κονσόλα σε recovery mode με το startx επίσης φορτώνει κανονικά το γραφικό περιβάλλον.
Σε debian ή windows δεν έχω παρόμοιο πρόβλημα.
Καμιά ιδέα, γιατί όπως γίνεται αντιληπτό κανένας άλλος δεν υπάρχει περίπτωσει να ανοίξει το laptop (πράγμα όχι απαραίτητα κακό, εκτός κι αν θες να το ανοίξει )

[vagrale13]

Off topic:
Καταρχας τι εχετε παθει ολοι με το Ctrl+Alt+F1 και θελετε να το αλλαζεται?
Ειναι τοσο εκνευριστικο που αντικατασταθηκε το backspace με το F1 ?
Απλα απορια το εχω, γιατι το βλεπω απο αρκετους, και δεν ετυχε να ρωτησω....

Τωρα.... για το προβλημα που εχεις, την επομενη φορα που θα μπεις κανονικα, δωσε το περιεχομενου του αρχειου

Κώδικας: Επιλογή όλων

sudo gedit /var/log/Xorg.0.log.old

[dim459]

Κώδικας: Επιλογή όλων


X.Org X Server 1.6.4
Release Date: 2009-9-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
Current Operating System: Linux dimitris-laptop 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC 2009 i686
Kernel command line: root=UUID=8aecf317-433b-4730-877d-56faf57edc29 ro quiet splash
Build Date: 26 October 2009 05:15:02PM
xorg-server 2:1.6.4-2ubuntu4 (buildd@)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Dec 28 20:47:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7

(--) PCI:*(0:1:0:0) 1039:6330:1025:0083 Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter rev 0, Mem @ 0xe8000000/134217728, 0xe2100000/131072, I/O @ 0x0000a000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(==) Matched sis for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "sis"
(II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
(II) Module sis: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.10.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX],
SIS340
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40)
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis
(--) Assigning device section with no busID to primary device
(--) Chipset SIS660/[M]661[F|M]X/[M]670/[M]741[GX]/[M]760[GX]/[M]761[GX]/[M]770[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[21] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[26] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[27] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[28] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[29] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2005/09/20-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
(II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation and updates.
(--) SIS(0): sisfb not found
(--) SIS(0): Relocated I/O registers at 0xA000
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) SIS(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) SIS(0): Depth 24, (--) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
(==) SIS(0): Using XAA acceleration architecture
(==) SIS(0): Using HW cursor
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
(II) SIS(0): WARNING: Using the Hotkey might freeze your machine, regardless
(II) SIS(0): whether enabled or disabled. This is no driver bug.
(==) SIS(0): SiSCtrl utility interface is disabled
(II) SIS(0): For information on SiSCtrl, see
http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
(==) SIS(0): DRI disabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on".
(--) SIS(0): 131072K shared video RAM (UMA)
(--) SIS(0): DRAM type: DDR SDRAM
(--) SIS(0): Memory clock: 198.861 MHz
(--) SIS(0): DRAM bus width: 64 bit
(--) SIS(0): Linear framebuffer at 0xE8000000
(--) SIS(0): MMIO registers at 0xE2100000 (size 64K)
(--) SIS(0): VideoRAM: 131072 KB
(II) SIS(0): Using 130496K of framebuffer memory at offset 0K
(--) SIS(0): Hardware supports two video overlays
(II) SIS(0):
Dear SiS76x user, your machine is using a shared memory framebuffer.
Due to hardware limitations of the SiS chip in combination with the
AMD CPU, video overlay support is very limited on this machine. If you
experience flashing lines in the video and/or the graphics display
during video playback, reduce the color depth and/or the resolution
and/or the refresh rate. Alternatively, use the video blitter.
(--) SIS(0): Detected SiS302LV video bridge (Charter/UMC-1, ID 1; Rev 0xe1)
(--) SIS(0): BIOS uses LCDA for low resolution and text modes
(--) SIS(0): No CRT1/VGA detected
(--) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB18 [2cc106])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(II) SIS(0): CRT2 gamma correction is enabled
(--) SIS(0): Memory bandwidth at 32 bpp is 397.722 MHz
(--) SIS(0): Detected LCD PanelDelayCompensation 0x01 (for LCD=CRT2)
(--) SIS(0): Detected LCD PanelDelayCompensation1 0x04 (for LCD=CRT1)
(--) SIS(0): 302LV/302ELV: Using EMI 0x600d703f (LCD)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(--) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(--) SIS(0): Max pixel clock is 290 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting missing CRT2 monitor HSync range
(II) SIS(0): Correcting missing CRT2 monitor VRefresh range
(II) SIS(0): "Unknown reason" in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
(II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
(WW) SIS(0): Unable to estimate virtual size
(II) SIS(0): Clock range: 10.00 to 290.64 MHz
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x600" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "640x480" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1024x768" (hsync out of range)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1280x1024" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (unknown reason)
(II) SIS(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (unknown reason)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (unknown reason)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "800x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1024x576" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x720" (hsync out of range)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x960" (unknown reason)
(II) SIS(0): Not using default mode "1280x768" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x768" (hsync out of range)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1400x1050" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "1152x864" (unknown reason)
(II) SIS(0): Not using default mode "848x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "856x480" (vrefresh out of range)
(II) SIS(0): Not using default mode "1360x768" (unknown reason)
(II) SIS(0): Not using default mode "1280x800" (vrefresh out of range)
(II) SIS(0): Not using default mode "1280x800" (hsync out of range)
(II) SIS(0): Not using default mode "1680x1050" (unknown reason)
(II) SIS(0): Not using default mode "1920x1080" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(II) SIS(0): Not using default mode "1280x854" (unknown reason)
(--) SIS(0): Virtual size is 1280x800 (pitch 1280)
(**) SIS(0): *Default mode "1280x800" (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x768" (1280x768) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1280x720" (1280x720) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
(**) SIS(0): *Default mode "1024x768" (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "1024x576" (1024x576) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "960x600" (960x600) (For CRT device: 41.5 MHz, 37.1 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "960x540" (960x540) (For CRT device: 37.3 MHz, 33.8 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x600" (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
(**) SIS(0): *Default mode "768x576" (768x576) (For CRT device: 35.0 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "720x576" (720x576) (For CRT device: 32.7 MHz, 35.9 kHz, 60.1 Hz)
(**) SIS(0): *Default mode "856x480" (856x480) (For CRT device: 33.9 MHz, 31.7 kHz, 59.8 Hz)
(**) SIS(0): *Default mode "848x480" (848x480) (For CRT device: 33.7 MHz, 31.0 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "800x480" (800x480) (For CRT device: 39.8 MHz, 37.7 kHz, 60.0 Hz)
(**) SIS(0): *Default mode "720x480" (720x480) (For CRT device: 28.3 MHz, 31.6 kHz, 61.0 Hz)
(**) SIS(0): *Default mode "640x480" (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
(**) SIS(0): *Default mode "640x400" (640x400) (For CRT device: 25.1 MHz, 31.6 kHz, 71.6 Hz)
(**) SIS(0): *Default mode "512x384" (512x384) (For CRT device: 32.6 MHz, 48.5 kHz, 60.1 Hz (D))
(**) SIS(0): *Default mode "400x300" (400x300) (For CRT device: 20.0 MHz, 37.9 kHz, 60.3 Hz (D))
(**) SIS(0): *Default mode "320x240" (320x240) (For CRT device: 12.5 MHz, 31.3 kHz, 60.7 Hz (D))
(**) SIS(0): *Default mode "320x200" (320x200) (For CRT device: 12.5 MHz, 31.3 kHz, 70.9 Hz (D))
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[5] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[9] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[10] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[11] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[12] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[13] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[14] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[15] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[16] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[17] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[18] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[19] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
[23] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[24] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[27] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[28] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[29] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[30] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[31] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[32] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[33] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[34] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 16384 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 2.27.g8
(II) SIS(0): Setting standard mode 0x16
(II) SIS(0): SiS76x/UMA: two video overlay(s) available in current mode
(II) SIS(0): RENDER acceleration enabled
(II) SIS(0): Framebuffer from (0,0) to (1279,26097)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
32 8x8 color pattern slots
(--) SIS(0): CPU frequency 1800.00Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(--) SIS(0): Checked libc memcpy()... 383.4 MiB/s
(--) SIS(0): Checked built-in-1 memcpy()... 393.8 MiB/s
(--) SIS(0): Checked built-in-2 memcpy()... 77.5 MiB/s
(--) SIS(0): Checked MMX memcpy()... 382.5 MiB/s
(--) SIS(0): Checked 3DNow! memcpy()... 378.1 MiB/s
(--) SIS(0): Checked MMX2 memcpy()... 433.8 MiB/s
(--) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(--) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(II) SIS(0): Using SiS300/315/330/340 series HW Xv
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 2.2.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ",extended"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ",extended"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ",extended"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,gr"
(**) Option "xkb_variant" ",extended"
(**) Option "xkb_options" "grp:alt_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.4, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Synaptics touchpad driver version 1.1.2
(**) Option "Device" "/dev/input/event7"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) filter chain progression: 2.00
(**) SynPS/2 Synaptics TouchPad: (accel) filter stage 0: 20.00 ms
(**) SynPS/2 Synaptics TouchPad: (accel) set acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: always reports core events
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: Device: "/dev/input/event6"
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found 9 mouse buttons
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found x and y relative axes
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Found scroll wheel(s)
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Configuring as mouse
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: YAxisMapping: buttons 4 and 5
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00" (type: MOUSE)
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) keeping acceleration scheme 1
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) filter chain progression: 2.00
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) filter stage 0: 20.00 ms
(**) Microsoft Microsoft Wireless Optical Mouse® 1.00: (accel) set acceleration profile 0
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: initialized for relative axes.
(II) SIS(0): Restoring by setting old mode 0x03
(II) Microsoft Microsoft Wireless Optical Mouse® 1.00: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "synaptics"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Power Button: Close
(II) UnloadModule: "evdev"
(II) Sleep Button: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xb763f000,0x10000]
(WW) SIS(0): xf86UnMapVidMem: cannot find region for [0xaf63f000,0x8000000]
ddxSigGiveUp: Closing log

[vagrale13]

Δωσε και το αποτελεσμα απο

Κώδικας: Επιλογή όλων

dmesg

[dim459]

Κώδικας: Επιλογή όλων


[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 9824960 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:00077ef0)
[ 0.000000] Memory: 1922264k/1964992k available (4566k kernel code, 41432k reserved, 2142k data, 540k init, 1055688k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575bb4 - 0xc078d3c8 (2142 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575bb4 (4566 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1800.175 MHz processor.
[ 0.000711] Console: colour VGA+ 80x25
[ 0.000716] console [tty0] enabled
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.35 BogoMIPS (lpj=7200700)
[ 0.004037] Security Framework initialized
[ 0.004069] AppArmor: AppArmor initialized
[ 0.004078] Mount-cache hash table entries: 512
[ 0.004233] Initializing cgroup subsys ns
[ 0.004238] Initializing cgroup subsys cpuacct
[ 0.004243] Initializing cgroup subsys memory
[ 0.004251] Initializing cgroup subsys freezer
[ 0.004254] Initializing cgroup subsys net_cls
[ 0.004268] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004271] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004276] mce: CPU supports 5 MCE banks
[ 0.004294] Performance Counters: AMD PMU driver.
[ 0.004302] ... version: 0
[ 0.004304] ... bit width: 48
[ 0.004306] ... generic counters: 4
[ 0.004308] ... value mask: 0000ffffffffffff
[ 0.004311] ... max period: 00007fffffffffff
[ 0.004313] ... fixed-purpose counters: 0
[ 0.004315] ... counter mask: 000000000000000f
[ 0.004320] Checking 'hlt' instruction... OK.
[ 0.020712] SMP alternatives: switching to UP code
[ 0.026794] Freeing SMP alternatives: 19k freed
[ 0.026821] ACPI: Core revision 20090521
[ 0.034473] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074163] CPU0: Mobile AMD Sempron(tm) Processor 3100+ stepping 02
[ 0.076001] Brought up 1 CPUs
[ 0.076001] Total of 1 processors activated (3600.35 BogoMIPS).
[ 0.076001] CPU0 attaching NULL sched-domain.
[ 0.076001] Booting paravirtualized kernel on bare hardware
[ 0.076001] regulator: core version 0.5
[ 0.076001] Time: 20:48:08 Date: 12/28/09
[ 0.076001] NET: Registered protocol family 16
[ 0.076001] EISA bus registered
[ 0.076001] ACPI: bus type pci registered
[ 0.076001] PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
[ 0.076001] PCI: Using configuration type 1 for base access
[ 0.076001] bio: create slab <bio-0> at 0
[ 0.076001] ACPI: EC: Look up EC in DSDT
[ 0.076808] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.108057] ACPI: Interpreter enabled
[ 0.108063] ACPI: (supports S0 S3 S4 S5)
[ 0.108080] ACPI: Using IOAPIC for interrupt routing
[ 0.110103] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.110105] ACPI: EC: driver started in interrupt mode
[ 0.110239] ACPI: No dock devices found.
[ 0.111275] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.111321] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe1ffffff]
[ 0.111418] pci 0000:00:02.0: Enabling SiS 96x SMBus
[ 0.111448] pci 0000:00:02.1: reg 20 io port: [0x8100-0x811f]
[ 0.111476] pci 0000:00:02.5: reg 10 io port: [0x1f0-0x1f7]
[ 0.111481] pci 0000:00:02.5: reg 14 io port: [0x3f4-0x3f7]
[ 0.111487] pci 0000:00:02.5: reg 18 io port: [0x170-0x177]
[ 0.111492] pci 0000:00:02.5: reg 1c io port: [0x374-0x377]
[ 0.111498] pci 0000:00:02.5: reg 20 io port: [0x2000-0x200f]
[ 0.111529] pci 0000:00:02.6: reg 10 io port: [0x1000-0x10ff]
[ 0.111535] pci 0000:00:02.6: reg 14 io port: [0x1c00-0x1c7f]
[ 0.111563] pci 0000:00:02.6: supports D1 D2
[ 0.111566] pci 0000:00:02.6: PME# supported from D3hot D3cold
[ 0.111570] pci 0000:00:02.6: PME# disabled
[ 0.111595] pci 0000:00:02.7: reg 10 io port: [0x1400-0x14ff]
[ 0.111601] pci 0000:00:02.7: reg 14 io port: [0x1c80-0x1cff]
[ 0.111628] pci 0000:00:02.7: supports D1 D2
[ 0.111631] pci 0000:00:02.7: PME# supported from D3hot D3cold
[ 0.111634] pci 0000:00:02.7: PME# disabled
[ 0.111651] pci 0000:00:03.0: reg 10 32bit mmio: [0xe2002000-0xe2002fff]
[ 0.111685] pci 0000:00:03.1: reg 10 32bit mmio: [0xe2003000-0xe2003fff]
[ 0.111726] pci 0000:00:03.2: reg 10 32bit mmio: [0xe2004000-0xe2004fff]
[ 0.111754] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[ 0.111758] pci 0000:00:03.2: PME# disabled
[ 0.111785] pci 0000:00:04.0: reg 10 io port: [0x1800-0x18ff]
[ 0.111791] pci 0000:00:04.0: reg 14 32bit mmio: [0xe2005000-0xe2005fff]
[ 0.111809] pci 0000:00:04.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.111822] pci 0000:00:04.0: supports D1 D2
[ 0.111824] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111828] pci 0000:00:04.0: PME# disabled
[ 0.111854] pci 0000:00:06.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 0.111868] pci 0000:00:06.0: supports D1 D2
[ 0.111871] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.111875] pci 0000:00:06.0: PME# disabled
[ 0.111895] pci 0000:00:0b.0: reg 10 32bit mmio: [0xe2000000-0xe2001fff]
[ 0.112100] pci 0000:01:00.0: reg 10 32bit mmio: [0xe8000000-0xefffffff]
[ 0.112105] pci 0000:01:00.0: reg 14 32bit mmio: [0xe2100000-0xe211ffff]
[ 0.112110] pci 0000:01:00.0: reg 18 io port: [0xa000-0xa07f]
[ 0.112125] pci 0000:01:00.0: supports D1 D2
[ 0.112145] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.112149] pci 0000:00:01.0: bridge 32bit mmio: [0xe2100000-0xe21fffff]
[ 0.112154] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.112172] pci_bus 0000:00: on NUMA node 0
[ 0.112176] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.118592] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
[ 0.118685] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
[ 0.118774] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
[ 0.118862] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
[ 0.118971] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
[ 0.119061] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
[ 0.119147] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
[ 0.119238] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
[ 0.119445] SCSI subsystem initialized
[ 0.119536] libata version 3.00 loaded.
[ 0.119618] usbcore: registered new interface driver usbfs
[ 0.119636] usbcore: registered new interface driver hub
[ 0.119660] usbcore: registered new device driver usb
[ 0.119790] ACPI: WMI: Mapper loaded
[ 0.119793] PCI: Using ACPI for IRQ routing
[ 0.119941] Bluetooth: Core ver 2.15
[ 0.119969] NET: Registered protocol family 31
[ 0.119971] Bluetooth: HCI device and connection manager initialized
[ 0.119974] Bluetooth: HCI socket layer initialized
[ 0.119977] NetLabel: Initializing
[ 0.119979] NetLabel: domain hash size = 128
[ 0.119981] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.120009] NetLabel: unlabeled traffic allowed by default
[ 0.121781] pnp: PnP ACPI init
[ 0.121807] ACPI: bus type pnp registered
[ 0.123545] pnp: PnP ACPI: found 8 devices
[ 0.123548] ACPI: ACPI bus type pnp unregistered
[ 0.123552] PnPBIOS: Disabled by ACPI PNP
[ 0.123566] system 00:04: ioport range 0x8000-0x807f has been reserved
[ 0.123570] system 00:04: ioport range 0x8080-0x80ff has been reserved
[ 0.123573] system 00:04: ioport range 0x8100-0x811f has been reserved
[ 0.123577] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 0.123581] system 00:04: ioport range 0x3f0-0x3f1 has been reserved
[ 0.123585] system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved
[ 0.123589] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.123593] system 00:04: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.123596] system 00:04: iomem range 0xffc00000-0xffc00fff has been reserved
[ 0.123600] system 00:04: iomem range 0xffe00000-0xffe00fff has been reserved
[ 0.123603] system 00:04: iomem range 0xffe80000-0xffefffff has been reserved
[ 0.123607] system 00:04: iomem range 0xfffe0000-0xfffeffff has been reserved
[ 0.123611] system 00:04: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.158280] AppArmor: AppArmor Filesystem Enabled
[ 0.158311] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.158314] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.158319] pci 0000:00:01.0: MEM window: 0xe2100000-0xe21fffff
[ 0.158324] pci 0000:00:01.0: PREFETCH window: 0xe8000000-0xefffffff
[ 0.158329] pci 0000:00:06.0: CardBus bridge, secondary bus 0000:02
[ 0.158332] pci 0000:00:06.0: IO window: 0x002400-0x0024ff
[ 0.158336] pci 0000:00:06.0: IO window: 0x002800-0x0028ff
[ 0.158341] pci 0000:00:06.0: PREFETCH window: 0x80000000-0x83ffffff
[ 0.158345] pci 0000:00:06.0: MEM window: 0x84000000-0x87ffffff
[ 0.158359] pci 0000:00:06.0: enabling device (0000 -> 0003)
[ 0.158365] alloc irq_desc for 19 on node -1
[ 0.158367] alloc kstat_irqs on node -1
[ 0.158376] pci 0000:00:06.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.158383] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.158386] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.158390] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.158393] pci_bus 0000:01: resource 1 mem: [0xe2100000-0xe21fffff]
[ 0.158396] pci_bus 0000:01: resource 2 pref mem [0xe8000000-0xefffffff]
[ 0.158399] pci_bus 0000:02: resource 0 io: [0x2400-0x24ff]
[ 0.158402] pci_bus 0000:02: resource 1 io: [0x2800-0x28ff]
[ 0.158405] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x83ffffff]
[ 0.158408] pci_bus 0000:02: resource 3 mem: [0x84000000-0x87ffffff]
[ 0.158451] NET: Registered protocol family 2
[ 0.158552] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.158934] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.160131] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.160725] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.160729] TCP reno registered
[ 0.160850] NET: Registered protocol family 1
[ 0.160928] Trying to unpack rootfs image as initramfs...
[ 0.403248] Freeing initrd memory: 7697k freed
[ 0.412214] Simple Boot Flag at 0x38 set to 0x1
[ 0.412349] cpufreq-nforce2: No nForce2 chipset.
[ 0.412378] Scanning for low memory corruption every 60 seconds
[ 0.412498] audit: initializing netlink socket (disabled)
[ 0.412524] type=2000 audit(1262033288.411:1): initialized
[ 0.422653] highmem bounce pool size: 64 pages
[ 0.422659] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.424076] VFS: Disk quotas dquot_6.5.2
[ 0.424138] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.424715] fuse init (API version 7.12)
[ 0.424801] msgmni has been set to 1709
[ 0.425013] alg: No test for stdrng (krng)
[ 0.425025] io scheduler noop registered
[ 0.425027] io scheduler anticipatory registered
[ 0.425030] io scheduler deadline registered
[ 0.425077] io scheduler cfq registered (default)
[ 0.852009] pci 0000:01:00.0: Boot video device
[ 0.852110] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.852133] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.854376] ACPI: AC Adapter [ACAD] (on-line)
[ 0.854437] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.854442] ACPI: Power Button [PWRF]
[ 0.854499] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.857270] ACPI: Lid Switch [LID]
[ 0.857315] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.857319] ACPI: Power Button [PWRB]
[ 0.857364] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.857367] ACPI: Sleep Button [SLPB]
[ 0.857523] Marking TSC unstable due to TSC halts in idle
[ 0.857548] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.857573] processor LNXCPU:00: registered as cooling_device0
[ 0.861557] Switched to high resolution mode on CPU 0
[ 0.864860] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.864868] ACPI: Thermal Zone [THRM] (54 C)
[ 0.864913] isapnp: Scanning for PnP cards...
[ 0.913996] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.218296] isapnp: No Plug & Play device found
[ 1.219433] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.219712] alloc irq_desc for 18 on node -1
[ 1.219715] alloc kstat_irqs on node -1
[ 1.219726] serial 0000:00:02.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.219732] serial 0000:00:02.6: PCI INT C disabled
[ 1.220745] brd: module loaded
[ 1.221203] loop: module loaded
[ 1.221301] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.221928] pata_sis 0000:00:02.5: version 0.5.2
[ 1.221942] alloc irq_desc for 16 on node -1
[ 1.221944] alloc kstat_irqs on node -1
[ 1.221955] pata_sis 0000:00:02.5: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.222157] scsi0 : pata_sis
[ 1.222262] scsi1 : pata_sis
[ 1.222426] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x2000 irq 14
[ 1.222429] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x2008 irq 15
[ 1.222766] Fixed MDIO Bus: probed
[ 1.222800] PPP generic driver version 2.4.2
[ 1.222915] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.222937] alloc irq_desc for 23 on node -1
[ 1.222940] alloc kstat_irqs on node -1
[ 1.222949] ehci_hcd 0000:00:03.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 1.222967] ehci_hcd 0000:00:03.2: EHCI Host Controller
[ 1.223021] ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
[ 1.223064] ehci_hcd 0000:00:03.2: cache line size of 64 is not supported
[ 1.223082] ehci_hcd 0000:00:03.2: irq 23, io mem 0xe2004000
[ 1.232025] ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00
[ 1.232120] usb usb1: configuration #1 chosen from 1 choice
[ 1.232151] hub 1-0:1.0: USB hub found
[ 1.232161] hub 1-0:1.0: 6 ports detected
[ 1.232224] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.232246] alloc irq_desc for 20 on node -1
[ 1.232248] alloc kstat_irqs on node -1
[ 1.232256] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 1.232269] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 1.232311] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[ 1.232335] ohci_hcd 0000:00:03.0: irq 20, io mem 0xe2002000
[ 1.288077] usb usb2: configuration #1 chosen from 1 choice
[ 1.288103] hub 2-0:1.0: USB hub found
[ 1.288119] hub 2-0:1.0: 3 ports detected
[ 1.288160] alloc irq_desc for 21 on node -1
[ 1.288162] alloc kstat_irqs on node -1
[ 1.288168] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.288176] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 1.288209] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[ 1.288232] ohci_hcd 0000:00:03.1: irq 21, io mem 0xe2003000
[ 1.344072] usb usb3: configuration #1 chosen from 1 choice
[ 1.344097] hub 3-0:1.0: USB hub found
[ 1.344107] hub 3-0:1.0: 3 ports detected
[ 1.344157] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.344250] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.347252] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.347258] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.347321] mice: PS/2 mouse device common for all mice
[ 1.347441] rtc_cmos 00:02: RTC can wake from S4
[ 1.347478] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.347502] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 1.347614] device-mapper: uevent: version 1.0.3
[ 1.347727] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.347804] device-mapper: multipath: version 1.1.0 loaded
[ 1.347807] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.347933] EISA: Probing bus 0 at eisa.0
[ 1.347940] Cannot allocate resource for EISA slot 1
[ 1.347943] Cannot allocate resource for EISA slot 2
[ 1.347962] Cannot allocate resource for EISA slot 8
[ 1.347964] EISA: Detected 0 cards.
[ 1.348068] cpuidle: using governor ladder
[ 1.348125] cpuidle: using governor menu
[ 1.348654] TCP cubic registered
[ 1.348808] NET: Registered protocol family 10
[ 1.349260] lo: Disabled Privacy Extensions
[ 1.349580] NET: Registered protocol family 17
[ 1.349600] Bluetooth: L2CAP ver 2.13
[ 1.349602] Bluetooth: L2CAP socket layer initialized
[ 1.349605] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.349607] Bluetooth: SCO socket layer initialized
[ 1.349659] Bluetooth: RFCOMM TTY layer initialized
[ 1.349662] Bluetooth: RFCOMM socket layer initialized
[ 1.349664] Bluetooth: RFCOMM ver 1.11
[ 1.349682] powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3100+ processors (1 cpu cores) (version 2.20.00)
[ 1.349725] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
[ 1.349728] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
[ 1.349731] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
[ 1.349775] Using IPI No-Shortcut mode
[ 1.349856] PM: Resume from disk failed.
[ 1.349869] registered taskstats version 1
[ 1.349983] Magic number: 5:53:853
[ 1.350070] rtc_cmos 00:02: setting system clock to 2009-12-28 20:48:09 UTC (1262033289)
[ 1.350074] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.350076] EDD information not available.
[ 1.378994] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.412311] ata1.00: failed to set max address (err_mask=0x1)
[ 1.412314] ata1.00: device aborted resize (268435456 -> 312581808), skipping HPA handling
[ 1.412321] ata1.00: ATA-7: WDC WD1600BEVE-00UYT0, 01.04A01, max UDMA/100
[ 1.412324] ata1.00: 268435456 sectors, multi 16: LBA48
[ 1.428208] ata1.00: configured for UDMA/100
[ 1.428333] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVE-0 01.0 PQ: 0 ANSI: 5
[ 1.428455] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.428495] sd 0:0:0:0: [sda] 268435456 512-byte logical blocks: (137 GB/128 GiB)
[ 1.428539] sd 0:0:0:0: [sda] Write Protect is off
[ 1.428542] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.428564] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.428686] sda: sda1 sda2 sda3 < sda5 > sda4
[ 1.461103] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.592228] ata2.00: ATAPI: Slimtype DVDRW SSM-8515S, GRS2, max UDMA/66
[ 1.608238] ata2.00: configured for UDMA/66
[ 1.612160] scsi 1:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GRS2 PQ: 0 ANSI: 5
[ 1.623175] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.623178] Uniform CD-ROM driver Revision: 3.20
[ 1.623274] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.623332] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.623359] Freeing unused kernel memory: 540k freed
[ 1.623943] Write protecting the kernel text: 4568k
[ 1.623978] Write protecting the kernel read-only data: 1836k
[ 1.785358] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 1.800896] Linux agpgart interface v0.103
[ 1.803854] agpgart-amd64 0000:00:00.0: AGP bridge [1039/0760]
[ 1.813577] sis900.c: v1.08.10 Apr. 2 2006
[ 1.831219] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xe0000000
[ 1.834693] sis900 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.839346] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
[ 1.845214] 0000:00:04.0: Using transceiver found at address 13 as default
[ 1.945586] eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 19, 00:16:36:3f:f7:3e
[ 1.946005] alloc irq_desc for 17 on node -1
[ 1.946008] alloc kstat_irqs on node -1
[ 1.946019] b43-pci-bridge 0000:00:0b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.015023] usb 2-2: configuration #1 chosen from 1 choice
[ 2.024418] usbcore: registered new interface driver hiddev
[ 2.024741] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0b.0
[ 2.037785] input: Microsoft Microsoft Wireless Optical Mouse® 1.00 as /devices/pci0000:00/0000:00:03.0/usb2/2-2/2-2:1.0/input/input6
[ 2.037875] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse® 1.00] on usb-0000:00:03.0-2/input0
[ 2.037895] usbcore: registered new interface driver usbhid
[ 2.037904] usbhid: v2.6:USB HID core driver
[ 3.284961] xor: automatically using best checksumming function: pIII_sse
[ 3.304006] pIII_sse : 5379.000 MB/sec
[ 3.304010] xor: using function: pIII_sse (5379.000 MB/sec)
[ 3.307402] device-mapper: dm-raid45: initialized v0.2594b
[ 8.608806] EXT4-fs (sda2): barriers enabled
[ 8.630859] kjournald2 starting: pid 410, dev sda2:8, commit interval 5 seconds
[ 8.630876] EXT4-fs (sda2): delayed allocation enabled
[ 8.630881] EXT4-fs: file extents enabled
[ 8.632462] EXT4-fs: mballoc enabled
[ 8.632479] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 9.562747] type=1505 audit(1262033297.709:2): operation="profile_load" pid=433 name=/usr/share/gdm/guest-session/Xsession
[ 9.588864] type=1505 audit(1262033297.737:3): operation="profile_load" pid=434 name=/sbin/dhclient3
[ 9.589193] type=1505 audit(1262033297.737:4): operation="profile_load" pid=434 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.589377] type=1505 audit(1262033297.737:5): operation="profile_load" pid=434 name=/usr/lib/connman/scripts/dhclient-script
[ 9.665506] type=1505 audit(1262033297.813:6): operation="profile_load" pid=435 name=/usr/bin/evince
[ 9.671360] type=1505 audit(1262033297.817:7): operation="profile_load" pid=435 name=/usr/bin/evince-previewer
[ 9.674949] type=1505 audit(1262033297.821:8): operation="profile_load" pid=435 name=/usr/bin/evince-thumbnailer
[ 9.710494] type=1505 audit(1262033297.857:9): operation="profile_load" pid=437 name=/usr/lib/cups/backend/cups-pdf
[ 9.710903] type=1505 audit(1262033297.857:10): operation="profile_load" pid=437 name=/usr/sbin/cupsd
[ 9.757837] type=1505 audit(1262033297.905:11): operation="profile_load" pid=438 name=/usr/sbin/mysqld-akonadi
[ 29.861685] udev: starting version 147
[ 29.869061] Adding 1975952k swap on /dev/sda5. Priority:-1 extents:1 across:1975952k
[ 29.973206] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.973767] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
[ 30.011672] lp: driver loaded but no devices found
[ 30.074472] EXT4-fs (sda2): internal journal on sda2:8
[ 30.349326] yenta_cardbus 0000:00:06.0: CardBus bridge found [1025:0083]
[ 30.349343] yenta_cardbus 0000:00:06.0: Using CSCINT to route CSC interrupts to PCI
[ 30.349347] yenta_cardbus 0000:00:06.0: Routing CardBus interrupts to PCI
[ 30.349352] yenta_cardbus 0000:00:06.0: TI: mfunc 0x00521d22, devctl 0x64
[ 30.388653] cfg80211: Calling CRDA to update world regulatory domain
[ 30.442843] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 30.449091] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 30.449107] acer-wmi: No or unsupported WMI interface, unable to load
[ 30.457973] cfg80211: World regulatory domain updated:
[ 30.457979] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 30.457983] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.457987] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.457990] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 30.457994] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.457997] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 30.579246] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 30.587680] yenta_cardbus 0000:00:06.0: ISA IRQ mask 0x06f8, PCI irq 19
[ 30.587686] yenta_cardbus 0000:00:06.0: Socket status: 30000007
[ 30.589100] Intel ICH 0000:00:02.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 30.641026] phy0: Selected rate control algorithm 'minstrel'
[ 30.641811] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 30.829243] eth0: Media Link Off
[ 30.829533] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.880034] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 31.018634] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 31.034681] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 31.035683] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 31.037354] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
[ 31.038021] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 31.038594] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 31.039320] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 31.051258] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 31.229173] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 31.267872] __ratelimit: 3 callbacks suppressed
[ 31.267877] type=1505 audit(1262026119.413:13): operation="profile_replace" pid=1001 name=/usr/share/gdm/guest-session/Xsession
[ 31.273601] type=1505 audit(1262026119.421:14): operation="profile_replace" pid=1002 name=/sbin/dhclient3
[ 31.273961] type=1505 audit(1262026119.421:15): operation="profile_replace" pid=1002 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 31.274149] type=1505 audit(1262026119.421:16): operation="profile_replace" pid=1002 name=/usr/lib/connman/scripts/dhclient-script
[ 31.288898] Registered led device: b43-phy0::tx
[ 31.288919] Registered led device: b43-phy0::rx
[ 31.288938] Registered led device: b43-phy0::radio
[ 31.289446] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.312350] type=1505 audit(1262026119.461:17): operation="profile_replace" pid=1003 name=/usr/bin/evince
[ 31.318658] type=1505 audit(1262026119.465:18): operation="profile_replace" pid=1003 name=/usr/bin/evince-previewer
[ 31.345639] type=1505 audit(1262026119.493:19): operation="profile_replace" pid=1003 name=/usr/bin/evince-thumbnailer
[ 31.356394] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[ 31.364987] type=1505 audit(1262026119.513:20): operation="profile_replace" pid=1010 name=/usr/lib/cups/backend/cups-pdf
[ 31.365401] type=1505 audit(1262026119.513:21): operation="profile_replace" pid=1010 name=/usr/sbin/cupsd
[ 31.389764] type=1505 audit(1262026119.537:22): operation="profile_replace" pid=1011 name=/usr/sbin/mysqld-akonadi
[ 31.413021] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 31.432084] intel8x0_measure_ac97_clock: measured 55368 usecs (2663 samples)
[ 31.432089] intel8x0: clocking to 48000
[ 32.329938] ppdev: user-space parallel port driver
[ 62.100837] wlan0: authenticate with AP 00:24:b2:53:16:a3
[ 62.102492] wlan0: authenticated
[ 62.102499] wlan0: associate with AP 00:24:b2:53:16:a3
[ 62.104732] wlan0: RX AssocResp from 00:24:b2:53:16:a3 (capab=0x401 status=0 aid=2)
[ 62.104738] wlan0: associated
[ 62.108309] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 72.888020] wlan0: no IPv6 routers present
[ 94.156056] Clocksource tsc unstable (delta = -260138933 ns)
dimitris@dimitris-laptop:~$



[vagrale13]

Την εγκατασταση πως την εχεις κανει, κανονικα ή μεσα απο τα παραθυρα (wubi)?

Δοκιμασε και βγαλε στην Επιφανεια Εργασιας σου τους φακελους panel και panel2.d
/home/user/.gconf/apps/panel
/home/user/.gnome2/panel2.d

κανε επανεκκινηση και δες αν εχει υπαρξει βελτιωση!

Μετα την επανεκκινηση, δεν θα εχεις τις οποιες ευθμισεις στους Πινακες εφαρμογων!

Μην διαγραψεις ακομα τους φακελους panel και panel2.d απο την Επιφανεια Εργασιας σου!

[dim459]

Κανονική εγκατάσταση, αλλά όχι καθαρή στο 9.10. Τελευταία φορά το partition του ubuntu είχε φορμαριστεί όταν πέρασα το 9.04 και στο 9.10 πήγα με upgrade.

[dim459]

Τους έβγαλα, δημιούργησε καινούργιους από μόνο του, αλλά μετά από 2-3 restart το ξαναέκανε. Να τους επαναφέρω ;
Υπάρχει περίπτωση να φταίει το θέμα που χρησιμοποιώ (το είχα εγκαταστήσει όσο είχε ακόμη 9.04, κατεβασμένο από gnome-look.org);
Βεβαίως το πρόβλημα το παρουσιάζει από το login screen, δηλαδή πριν μπει στο desktop, οπότε και δεν γνωρίζω αν ήδη από αυτό το στάδιο επιχειρεί να χρησιμοποιήσει το συγκεκριμένο θέμα.

[vagrale13]

Τους έβγαλα, δημιούργησε καινούργιους από μόνο του, αλλά μετά από 2-3 restart το ξαναέκανε. Να τους επαναφέρω ;

Ναι, αν δεν υπηρξε βελτιωση, βαλε αυτους που ειχες, παλι!

Υπάρχει περίπτωση να φταίει το θέμα που χρησιμοποιώ (το είχα εγκαταστήσει όσο είχε ακόμη 9.04, κατεβασμένο από gnome-look.org);
Βεβαίως το πρόβλημα το παρουσιάζει από το login screen, δηλαδή πριν μπει στο desktop, οπότε και δεν γνωρίζω αν ήδη από αυτό το στάδιο επιχειρεί να χρησιμοποιήσει το συγκεκριμένο θέμα.

Ναι, δοκιμασε και αυτο, επελεξε το Human.
Επισης δοκιμασε με τον παλιοτερο kernel που εχεις επιλογη απο το menu,τωρα εχεις τον 2.6.31.16
δοκιμασε με τον 2.6.31.15 και δες αν κανει το ιδιο!
Επισης ξετικαρε και οτι εχεις προσθεσει στα Προγραμματα εκκινησης, και αφησε μονο τα απαραιτητα!

Κανε αυτα και βλεπουμε!

[dim459]

Το θέμα δεν έφταιγε, το κάνει και με το human.
To πρόβλημα υπάρχει με τον τελευταίο πυρήνα 2.6.31-16.
Δοκίμασα πολλά reboots με τους 2.6.31-14 και 2.6.31-15 και ανοίγει κανονικά. Στον τελευταίο πυρήνα αρχίζει το πρόβλημα.
Δοκίμασα από το synaptic να επανεγκαταστήσω το σχετικό linux image, αλλά δεν είχε αποτέλεσμα.