πρόβλημα σύνδεσης wifi σε fujitsu-siemens amilo l1300

από **dimitris100** » 28 Σεπ 2011, 22:32

παιδιά,καλησπέρα! Αν και χρησιμοποιώ / παρακολουθώ το ubuntu, πρώτη φορά γράφω.
Ο υπολογιστής μου δεν μπορεί να βρεί ασύρματα δίκτυα. Μέχρι και την έκδοση 10.4 (αν θυμάμαι καλά), τα έβρισκε αυτόματα. Επίσης, βρίσκει τα δίκτυα αυτόματα με το puppy linux, (και με το gos3.1 σε live cd).Έχω διαβάσει όσα περισσότερα posts έχω βρει για το θέμα, δοκίμασα μερικά, αλλά δεν κατάφερα τίποτα. Μπορεί κανείς να βοηθήσει, εξηγώντας μου βήμα - βήμα κάθε φορά;

Χρησιμοποιώ linux περισότερο από 2 χρόνια (desktop dual boot και laptop αποκλειστικά xubuntu). Με έχουν βολέψει γενικά μία χαρά, εκτός από αυτό το πρόβλημα(και φυσικά οι web κάμερες, αλλά αυτό για αλλού).

Παραθέτω τα αποτελέσματα από τις εντολές:

lspci -nn

Κώδικας: Επιλογή όλων: 00:00.0 Host bridge [0600]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3580] (rev 02) 00:00.1 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3584] (rev 02) 00:00.3 System peripheral [0880]: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller [8086:3585] (rev 02) 00:02.0 VGA compatible controller [0300]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) 00:02.1 Display controller [0380]: Intel Corporation 82852/855GM Integrated Graphics Device [8086:3582] (rev 02) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 83) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge [8086:24cc] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE Controller [8086:24ca] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 03) 00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03) 00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 03) 01:01.0 Network controller [0280]: Intersil Corporation ISL3886 [Prism Javelin/Prism Xbow] [1260:3886] (rev 01) 01:02.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) 01:04.0 CardBus bridge [0607]: ENE Technology Inc CB-710/2/4 Cardbus Controller [1524:1411] (rev 01)

lsusb

Κώδικας: Επιλογή όλων: Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ευχαριστώ

από **xaris2335** » 28 Σεπ 2011, 22:53

Καλως ήρθες φίλε μου.
Δώσε το αποτέλεσμα απο ..ξεχωριστά και βλέπουμε.

Κώδικας: Επιλογή όλων: lsmod dmesg

και κάτι άλλο πες μου ότι δε χρησιμοποίησες το ndiswraper :silent:

από **dimitris100** » 28 Σεπ 2011, 23:01

καλως σας βρήκα!

lsmod

Κώδικας: Επιλογή όλων: Module Size Used by parport_pc 32111 0 ppdev 12849 0 snd_intel8x0 33213 3 snd_ac97_codec 105614 1 snd_intel8x0 ac97_bus 12642 1 snd_ac97_codec snd_pcm 80042 2 snd_intel8x0,snd_ac97_codec i915 451033 2 snd_seq_midi 13132 0 p54pci 17054 0 snd_rawmidi 25269 1 snd_seq_midi p54common 32371 1 p54pci crc_ccitt 12595 1 p54common mac80211 257001 2 p54pci,p54common snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event snd_timer 28659 2 snd_pcm,snd_seq pcmcia 39671 0 snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq drm_kms_helper 40745 1 i915 joydev 17322 0 drm 184164 2 i915,drm_kms_helper cfg80211 156212 2 p54common,mac80211 yenta_socket 27230 0 pcmcia_rsrc 18292 1 yenta_socket snd 55295 13 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device pcmcia_core 21505 3 pcmcia,yenta_socket,pcmcia_rsrc psmouse 73312 0 soundcore 12600 1 snd snd_page_alloc 14073 2 snd_intel8x0,snd_pcm shpchp 32345 0 i2c_algo_bit 13184 1 i915 serio_raw 12990 0 video 18951 1 i915 lp 13349 0 parport 36746 3 parport_pc,ppdev,lp 8139too 23208 0 8139cp 22497 0

dmesg

Κώδικας: Επιλογή όλων: [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-11-generic (buildd@zirconium) (gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #50-Ubuntu SMP Mon Sep 12 21:18:14 UTC 2011 (Ubuntu 2.6.38-11.50-generic 2.6.38.8) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001dff0000 (usable) [ 0.000000] BIOS-e820: 000000001dff0000 - 000000001dffffc0 (ACPI data) [ 0.000000] BIOS-e820: 000000001dffffc0 - 000000001e000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: FUJITSU SIEMENS AMILO L Series/AMILO L Series, BIOS R1.10 12/31/2004 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x1dff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CBFFF write-protect [ 0.000000] CC000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FF0000000 write-back [ 0.000000] 1 base 010000000 mask FF8000000 write-back [ 0.000000] 2 base 018000000 mask FFC000000 write-back [ 0.000000] 3 base 01C000000 mask FFE000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 01c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001dff0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001dc00000 page 2M [ 0.000000] 001dc00000 - 001dff0000 page 4k [ 0.000000] kernel direct mapping tables up to 1dff0000 @ 1bfb000-1c00000 [ 0.000000] RAMDISK: 1c971000 - 1d5b4000 [ 0.000000] ACPI: RSDP 000e6010 00014 (v00 OID_00) [ 0.000000] ACPI: RSDT 1dffce90 00030 (v01 INSYDE RSDT_000 00000001 _CSI 00010103) [ 0.000000] ACPI: FACP 1dfffb00 00074 (v01 INSYDE FACP_000 00000100 _CSI 00010103) [ 0.000000] ACPI: DSDT 1dffced0 02C27 (v01 MTC___ winner__ 00001004 INTL 02002025) [ 0.000000] ACPI: FACS 1dffffc0 00040 [ 0.000000] ACPI: BOOT 1dfffb90 00028 (v01 INSYDE SYS_BOOT 00000100 _CSI 00010103) [ 0.000000] ACPI: DBGP 1dfffbc0 00034 (v01 INSYDE DBGP_000 00000100 _CSI 00010103) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 479MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1dff0000 [ 0.000000] low ram: 0 - 1dff0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001dff0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001dff0 [ 0.000000] On node 0 totalpages: 122751 [ 0.000000] free_area_init_node: node 0, pgdat c1784180, node_mem_map ddc2f200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 928 pages used for memmap [ 0.000000] Normal zone: 117840 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] APIC: switched to apic NOOP [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1b80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @dd800000 s28800 r0 d24448 u4194304 [ 0.000000] pcpu-alloc: s28800 r0 d24448 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 121791 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=03bc4843-46ce-4332-b40f-2fbbf4d28602 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2456960 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 462372k/491456k available (5191k kernel code, 28632k reserved, 2537k data, 700k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xde7f0000 - 0xff7fe000 ( 528 MB) [ 0.000000] lowmem : 0xc0000000 - 0xddff0000 ( 479 MB) [ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB) [ 0.000000] .data : 0xc1511e91 - 0xc178c500 (2537 kB) [ 0.000000] .text : 0xc1000000 - 0xc1511e91 (5191 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=dc406000 soft=dc408000 [ 0.000000] vt handoff: transparent VT on vt#7 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1296.849 MHz processor. [ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.69 BogoMIPS (lpj=5187396) [ 0.008012] pid_max: default: 32768 minimum: 301 [ 0.012037] Security Framework initialized [ 0.012069] AppArmor: AppArmor initialized [ 0.012072] Yama: becoming mindful. [ 0.012166] Mount-cache hash table entries: 512 [ 0.012371] Initializing cgroup subsys ns [ 0.012377] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.012383] Initializing cgroup subsys cpuacct [ 0.012391] Initializing cgroup subsys memory [ 0.012408] Initializing cgroup subsys devices [ 0.012412] Initializing cgroup subsys freezer [ 0.012415] Initializing cgroup subsys net_cls [ 0.012419] Initializing cgroup subsys blkio [ 0.012479] mce: CPU supports 5 MCE banks [ 0.013411] SMP alternatives: switching to UP code [ 0.024278] Freeing SMP alternatives: 20k freed [ 0.024292] ACPI: Core revision 20110112 [ 0.026781] ACPI: setting ELCR to 0200 (from 0ca8) [ 0.028020] ftrace: allocating 23652 entries in 47 pages [ 0.032122] weird, boot CPU (#0) not listed by the BIOS. [ 0.032127] SMP motherboard not detected. [ 0.032131] Local APIC not detected. Using dummy APIC emulation. [ 0.032134] SMP disabled [ 0.032137] Performance Events: [ 0.032142] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.032145] no hardware sampling interrupt available. [ 0.032149] p6 PMU driver. [ 0.032158] ... version: 0 [ 0.032161] ... bit width: 32 [ 0.032163] ... generic registers: 2 [ 0.032166] ... value mask: 00000000ffffffff [ 0.032169] ... max period: 000000007fffffff [ 0.032172] ... fixed-purpose events: 0 [ 0.032175] ... event mask: 0000000000000003 [ 0.032896] Brought up 1 CPUs [ 0.032901] Total of 1 processors activated (2593.69 BogoMIPS). [ 0.033061] devtmpfs: initialized [ 0.037300] print_constraints: dummy: [ 0.037326] Time: 19:15:56 Date: 09/28/11 [ 0.037394] NET: Registered protocol family 16 [ 0.037583] EISA bus registered [ 0.037599] ACPI: bus type pci registered [ 0.037779] PCI: PCI BIOS revision 2.10 entry at 0xe9854, last bus=1 [ 0.037782] PCI: Using configuration type 1 for base access [ 0.039508] bio: create slab <bio-0> at 0 [ 0.040658] ACPI: EC: Look up EC in DSDT [ 0.043144] ACPI: Interpreter enabled [ 0.043156] ACPI: (supports S0 S3 S4 S5) [ 0.043189] ACPI: Using PIC for interrupt routing [ 0.048212] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.053776] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 [ 0.053934] ACPI: No dock devices found. [ 0.053938] HEST: Table not found. [ 0.053944] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.054109] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.054430] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.054435] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.054440] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.054445] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored) [ 0.054450] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000cffff] (ignored) [ 0.054455] pci_root PNP0A03:00: host bridge window [mem 0xffb80000-0xffbfffff] (ignored) [ 0.054459] pci_root PNP0A03:00: host bridge window [mem 0xfff80000-0xffffffff] (ignored) [ 0.054464] pci_root PNP0A03:00: host bridge window [mem 0x1e000000-0xfebfffff] (ignored) [ 0.054482] pci 0000:00:00.0: [8086:3580] type 0 class 0x000600 [ 0.054533] pci 0000:00:00.1: [8086:3584] type 0 class 0x000880 [ 0.054582] pci 0000:00:00.3: [8086:3585] type 0 class 0x000880 [ 0.054635] pci 0000:00:02.0: [8086:3582] type 0 class 0x000300 [ 0.054649] pci 0000:00:02.0: reg 10: [mem 0xb0000000-0xb7ffffff pref] [ 0.054658] pci 0000:00:02.0: reg 14: [mem 0xf0000000-0xf007ffff] [ 0.054666] pci 0000:00:02.0: reg 18: [io 0xe000-0xe007] [ 0.054697] pci 0000:00:02.0: supports D1 [ 0.054712] pci 0000:00:02.1: [8086:3582] type 0 class 0x000380 [ 0.054724] pci 0000:00:02.1: reg 10: [mem 0x00000000-0x07ffffff pref] [ 0.054733] pci 0000:00:02.1: reg 14: [mem 0x00000000-0x0007ffff] [ 0.054767] pci 0000:00:02.1: supports D1 [ 0.054819] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03 [ 0.054864] pci 0000:00:1d.0: reg 20: [io 0x1200-0x121f] [ 0.054899] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03 [ 0.054944] pci 0000:00:1d.1: reg 20: [io 0x1600-0x161f] [ 0.054991] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03 [ 0.055014] pci 0000:00:1d.7: reg 10: [mem 0xfebff000-0xfebff3ff] [ 0.055093] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.055100] pci 0000:00:1d.7: PME# disabled [ 0.055119] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.055163] pci 0000:00:1f.0: [8086:24cc] type 0 class 0x000601 [ 0.055229] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH4 ACPI/GPIO/TCO [ 0.055236] pci 0000:00:1f.0: quirk: [io 0x1300-0x133f] claimed by ICH4 GPIO [ 0.055253] pci 0000:00:1f.1: [8086:24ca] type 0 class 0x000101 [ 0.055269] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] [ 0.055280] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] [ 0.055292] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] [ 0.055303] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] [ 0.055314] pci 0000:00:1f.1: reg 20: [io 0x1100-0x110f] [ 0.055326] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff] [ 0.055355] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05 [ 0.055401] pci 0000:00:1f.3: reg 20: [io 0x1400-0x141f] [ 0.055438] pci 0000:00:1f.5: [8086:24c5] type 0 class 0x000401 [ 0.055455] pci 0000:00:1f.5: reg 10: [io 0xe100-0xe1ff] [ 0.055466] pci 0000:00:1f.5: reg 14: [io 0xe200-0xe23f] [ 0.055477] pci 0000:00:1f.5: reg 18: [mem 0xf0080400-0xf00805ff] [ 0.055488] pci 0000:00:1f.5: reg 1c: [mem 0xf0080600-0xf00806ff] [ 0.055527] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.055532] pci 0000:00:1f.5: PME# disabled [ 0.055551] pci 0000:00:1f.6: [8086:24c6] type 0 class 0x000703 [ 0.055568] pci 0000:00:1f.6: reg 10: [io 0xe300-0xe3ff] [ 0.055579] pci 0000:00:1f.6: reg 14: [io 0xe400-0xe47f] [ 0.055630] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.055636] pci 0000:00:1f.6: PME# disabled [ 0.055669] pci 0000:01:01.0: [1260:3886] type 0 class 0x000280 [ 0.055687] pci 0000:01:01.0: reg 10: [mem 0xe0002000-0xe0003fff] [ 0.055749] pci 0000:01:01.0: supports D1 D2 [ 0.055753] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055759] pci 0000:01:01.0: PME# disabled [ 0.055778] pci 0000:01:02.0: [10ec:8139] type 0 class 0x000200 [ 0.055795] pci 0000:01:02.0: reg 10: [io 0xc100-0xc1ff] [ 0.055807] pci 0000:01:02.0: reg 14: [mem 0xe0000000-0xe00000ff] [ 0.055861] pci 0000:01:02.0: supports D1 D2 [ 0.055865] pci 0000:01:02.0: PME# supported from D1 D2 D3hot D3cold [ 0.055870] pci 0000:01:02.0: PME# disabled [ 0.055890] pci 0000:01:04.0: [1524:1411] type 2 class 0x000607 [ 0.055908] pci 0000:01:04.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.055927] pci 0000:01:04.0: supports D1 D2 [ 0.055931] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.055937] pci 0000:01:04.0: PME# disabled [ 0.055981] pci 0000:00:1e.0: PCI bridge to [bus 01-01] (subtractive decode) [ 0.055988] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] [ 0.055995] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.056013] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref] [ 0.056018] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.056022] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.056061] pci_bus 0000:02: [bus 02-05] partially hidden behind transparent bridge 0000:01 [bus 01-01] [ 0.056073] pci_bus 0000:00: on NUMA node 0 [ 0.056079] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.056158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.059972] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *10 11) [ 0.060092] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 10 11) [ 0.060187] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 10 *11) [ 0.060280] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 10 *11) [ 0.060368] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 10 11) [ 0.060442] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 10 11) *0, disabled. [ 0.060517] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 10 11) *0, disabled. [ 0.060601] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 10 11) *7 [ 0.060774] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.060787] vgaarb: loaded [ 0.061150] SCSI subsystem initialized [ 0.061245] libata version 3.00 loaded. [ 0.061338] usbcore: registered new interface driver usbfs [ 0.061359] usbcore: registered new interface driver hub [ 0.061401] usbcore: registered new device driver usb [ 0.061576] wmi: Mapper loaded [ 0.061579] PCI: Using ACPI for IRQ routing [ 0.061585] PCI: pci_cache_line_size set to 64 bytes [ 0.061658] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.061663] reserve RAM buffer: 000000001dff0000 - 000000001fffffff [ 0.061850] NetLabel: Initializing [ 0.061853] NetLabel: domain hash size = 128 [ 0.061856] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.061877] NetLabel: unlabeled traffic allowed by default [ 0.061955] Switching to clocksource pit [ 0.073491] AppArmor: AppArmor Filesystem Enabled [ 0.073566] pnp: PnP ACPI init [ 0.073604] ACPI: bus type pnp registered [ 0.076273] pnp 00:00: [bus 00-ff] [ 0.076279] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.076284] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.076288] pnp 00:00: [io 0x0d00-0xffff window] [ 0.076313] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.076318] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.076322] pnp 00:00: [mem 0x000c0000-0x000cffff window] [ 0.076326] pnp 00:00: [mem 0xffb80000-0xffbfffff] [ 0.076330] pnp 00:00: [mem 0xfff80000-0xffffffff] [ 0.076334] pnp 00:00: [mem 0x1e000000-0xfebfffff window] [ 0.076454] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.076757] pnp 00:01: [irq 12] [ 0.076827] pnp 00:01: Plug and Play ACPI device, IDs SYN0c06 SYN0c00 PNP0f13 (active) [ 0.076845] pnp 00:02: [io 0x0060] [ 0.076848] pnp 00:02: [io 0x0064] [ 0.076852] pnp 00:02: [irq 1] [ 0.076911] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.076927] pnp 00:03: [io 0x0070-0x0077] [ 0.076931] pnp 00:03: [irq 8] [ 0.076990] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.077008] pnp 00:04: [io 0x0061] [ 0.077074] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.077090] pnp 00:05: [mem 0xfff80000-0xffffffff] [ 0.077199] system 00:05: [mem 0xfff80000-0xffffffff] has been reserved [ 0.077205] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.077227] pnp 00:06: [io 0x0000-0x001f] [ 0.077231] pnp 00:06: [io 0x0080] [ 0.077235] pnp 00:06: [io 0x0092] [ 0.077244] pnp 00:06: [io 0x0081-0x008f] [ 0.077247] pnp 00:06: [io 0x0090-0x0091] [ 0.077251] pnp 00:06: [io 0x0093-0x009f] [ 0.077254] pnp 00:06: [io 0x00c0-0x00df] [ 0.077258] pnp 00:06: [dma 4] [ 0.077320] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.077338] pnp 00:07: [io 0x002e-0x002f] [ 0.077342] pnp 00:07: [io 0x0680-0x06ff] [ 0.077346] pnp 00:07: [io 0x0200-0x020f] [ 0.077349] pnp 00:07: [io 0x0290-0x0297] [ 0.077353] pnp 00:07: [io 0x1000-0x107f] [ 0.077357] pnp 00:07: [io 0x1300-0x133f] [ 0.077360] pnp 00:07: [io 0x077c-0x077f] [ 0.077453] system 00:07: [io 0x0680-0x06ff] has been reserved [ 0.077459] system 00:07: [io 0x0200-0x020f] has been reserved [ 0.077463] system 00:07: [io 0x0290-0x0297] has been reserved [ 0.077468] system 00:07: [io 0x1000-0x107f] has been reserved [ 0.077473] system 00:07: [io 0x1300-0x133f] has been reserved [ 0.077478] system 00:07: [io 0x077c-0x077f] has been reserved [ 0.077483] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.077500] pnp 00:08: [io 0x00f0] [ 0.077504] pnp 00:08: [irq 13] [ 0.077567] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.077583] pnp 00:09: [mem 0xffb80000-0xffbfffff] [ 0.077587] pnp 00:09: [mem 0xffb00000-0xffb7ffff] [ 0.077651] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active) [ 0.077679] pnp: PnP ACPI: found 10 devices [ 0.077682] ACPI: ACPI bus type pnp unregistered [ 0.077690] PnPBIOS: Disabled by ACPI PNP [ 0.115486] Switching to clocksource acpi_pm [ 0.115558] pci 0000:00:02.1: BAR 0: assigned [mem 0x20000000-0x27ffffff pref] [ 0.115567] pci 0000:00:02.1: BAR 0: set to [mem 0x20000000-0x27ffffff pref] (PCI address [0x20000000-0x27ffffff]) [ 0.115575] pci 0000:00:02.1: BAR 1: assigned [mem 0x28000000-0x2807ffff] [ 0.115581] pci 0000:00:02.1: BAR 1: set to [mem 0x28000000-0x2807ffff] (PCI address [0x28000000-0x2807ffff]) [ 0.115588] pci 0000:00:1f.1: BAR 5: assigned [mem 0x28080000-0x280803ff] [ 0.115596] pci 0000:00:1f.1: BAR 5: set to [mem 0x28080000-0x280803ff] (PCI address [0x28080000-0x280803ff]) [ 0.115603] pci 0000:01:04.0: BAR 15: assigned [mem 0xa0000000-0xa3ffffff pref] [ 0.115609] pci 0000:01:04.0: BAR 16: assigned [mem 0xe4000000-0xe7ffffff] [ 0.115614] pci 0000:01:04.0: BAR 0: assigned [mem 0xe0001000-0xe0001fff] [ 0.115621] pci 0000:01:04.0: BAR 0: set to [mem 0xe0001000-0xe0001fff] (PCI address [0xe0001000-0xe0001fff]) [ 0.115626] pci 0000:01:04.0: BAR 13: assigned [io 0xc000-0xc0ff] [ 0.115631] pci 0000:01:04.0: BAR 14: assigned [io 0xc400-0xc4ff] [ 0.115635] pci 0000:01:04.0: CardBus bridge to [bus 02-05] [ 0.115640] pci 0000:01:04.0: bridge window [io 0xc000-0xc0ff] [ 0.115646] pci 0000:01:04.0: bridge window [io 0xc400-0xc4ff] [ 0.115653] pci 0000:01:04.0: bridge window [mem 0xa0000000-0xa3ffffff pref] [ 0.115659] pci 0000:01:04.0: bridge window [mem 0xe4000000-0xe7ffffff] [ 0.115666] pci 0000:00:1e.0: PCI bridge to [bus 01-01] [ 0.115671] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff] [ 0.115678] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xefffffff] [ 0.115685] pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xafffffff pref] [ 0.115704] pci 0000:00:1e.0: setting latency timer to 64 [ 0.115897] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 [ 0.115902] PCI: setting IRQ 5 as level-triggered [ 0.115909] pci 0000:01:04.0: PCI INT A -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.115919] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.115923] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.115928] pci_bus 0000:01: resource 0 [io 0xc000-0xdfff] [ 0.115932] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xefffffff] [ 0.115937] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff pref] [ 0.115941] pci_bus 0000:01: resource 4 [io 0x0000-0xffff] [ 0.115946] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff] [ 0.115951] pci_bus 0000:02: resource 0 [io 0xc000-0xc0ff] [ 0.115955] pci_bus 0000:02: resource 1 [io 0xc400-0xc4ff] [ 0.115959] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xa3ffffff pref] [ 0.115964] pci_bus 0000:02: resource 3 [mem 0xe4000000-0xe7ffffff] [ 0.116025] Switched to NOHz mode on CPU #0 [ 0.116073] NET: Registered protocol family 2 [ 0.116183] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.116494] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.116657] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.116821] TCP: Hash tables configured (established 16384 bind 16384) [ 0.116825] TCP reno registered [ 0.116830] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.116844] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.116970] NET: Registered protocol family 1 [ 0.117008] pci 0000:00:02.0: Boot video device [ 0.117094] PCI: CLS mismatch (64 != 32), using 64 bytes [ 0.117228] Simple Boot Flag at 0x37 set to 0x1 [ 0.117423] cpufreq-nforce2: No nForce2 chipset. [ 0.117663] audit: initializing netlink socket (disabled) [ 0.117689] type=2000 audit(1317237356.115:1): initialized [ 0.133625] Trying to unpack rootfs image as initramfs... [ 0.156853] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.164334] VFS: Disk quotas dquot_6.5.2 [ 0.164460] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.165755] fuse init (API version 7.16) [ 0.165930] msgmni has been set to 903 [ 0.172375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.176385] io scheduler noop registered [ 0.176390] io scheduler deadline registered [ 0.176448] io scheduler cfq registered (default) [ 0.176711] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.176761] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.300138] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.420676] ACPI: AC Adapter [AC] (on-line) [ 0.420873] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 [ 0.420889] ACPI: Sleep Button [SBTN] [ 0.420981] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.424311] ACPI: Lid Switch [LID] [ 0.424454] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.424464] ACPI: Power Button [PWRF] [ 0.424643] ACPI: acpi_idle registered with cpuidle [ 0.424693] Marking TSC unstable due to TSC halts in idle [ 0.429522] ERST: Table is not found! [ 0.429708] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.431641] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 0.431651] serial 0000:00:1f.6: PCI INT B disabled [ 0.431846] Linux agpgart interface v0.103 [ 0.431942] agpgart-intel 0000:00:00.0: Intel 855GM Chipset [ 0.431970] agpgart-intel 0000:00:00.0: detected gtt size: 131072K total, 131072K mappable [ 0.432528] agpgart-intel 0000:00:00.0: detected 32768K stolen memory [ 0.436816] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xb0000000 [ 0.439118] brd: module loaded [ 0.439474] isapnp: Scanning for PnP cards... [ 0.493241] loop: module loaded [ 0.493446] i2c-core: driver [adp5520] using legacy suspend method [ 0.493449] i2c-core: driver [adp5520] using legacy resume method [ 0.493659] ata_piix 0000:00:1f.1: version 2.13 [ 0.493678] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.493876] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.493881] PCI: setting IRQ 11 as level-triggered [ 0.493889] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.493945] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.494542] scsi0 : ata_piix [ 0.494704] scsi1 : ata_piix [ 0.495789] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14 [ 0.495821] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15 [ 0.496713] Fixed MDIO Bus: probed [ 0.496783] PPP generic driver version 2.4.2 [ 0.496883] tun: Universal TUN/TAP device driver, 1.6 [ 0.496886] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.497040] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.658939] ata1.00: ATA-6: ST94019A, 3.05, max UDMA/100 [ 0.658946] ata1.00: 78140160 sectors, multi 16: LBA48 [ 0.664664] ata2.01: ATAPI: HL-DT-ST DVDRAM GMA-4082N, HA01, max UDMA/33 [ 0.677364] ata1.00: configured for UDMA/100 [ 0.723312] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.723329] ACPI: Battery Slot [BAT0] (battery present) [ 0.723505] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 [ 0.723511] PCI: setting IRQ 10 as level-triggered [ 0.723521] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 10 (level, low) -> IRQ 10 [ 0.723551] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.723557] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.723714] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.723770] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.727652] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 0.727667] ehci_hcd 0000:00:1d.7: irq 10, io mem 0xfebff000 [ 0.731574] ata2.01: configured for UDMA/33 [ 0.792125] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.792468] hub 1-0:1.0: USB hub found [ 0.792484] hub 1-0:1.0: 4 ports detected [ 0.792628] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.792660] uhci_hcd: USB Universal Host Controller Interface driver [ 0.792975] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.792983] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 0.792999] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.793004] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.793109] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.793150] uhci_hcd 0000:00:1d.0: irq 10, io base 0x00001200 [ 0.793371] hub 2-0:1.0: USB hub found [ 0.793378] hub 2-0:1.0: 2 ports detected [ 1.039833] isapnp: No Plug & Play device found [ 1.040138] scsi 0:0:0:0: Direct-Access ATA ST94019A 3.05 PQ: 0 ANSI: 5 [ 1.040506] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.040815] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.040905] sd 0:0:0:0: [sda] Write Protect is off [ 1.040910] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.040949] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.044778] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GMA-4082N HA01 PQ: 0 ANSI: 5 [ 1.050652] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.050659] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.050909] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 1.051052] sr 1:0:1:0: Attached scsi generic sg1 type 5 [ 1.072233] Freeing initrd memory: 12556k freed [ 1.192257] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 1.192273] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 1.192296] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.192303] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.192524] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.192570] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001600 [ 1.192883] hub 3-0:1.0: USB hub found [ 1.192891] hub 3-0:1.0: 2 ports detected [ 1.193122] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.201791] i8042: Detected active multiplexing controller, rev 1.1 [ 1.206424] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.206440] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.206502] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.206554] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.206599] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.206828] mousedev: PS/2 mouse device common for all mice [ 1.207126] rtc_cmos 00:03: RTC can wake from S4 [ 1.207217] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.207241] rtc0: alarms up to one month, 242 bytes nvram [ 1.207441] device-mapper: uevent: version 1.0.3 [ 1.207595] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 1.207741] device-mapper: multipath: version 1.2.0 loaded [ 1.207746] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.207913] EISA: Probing bus 0 at eisa.0 [ 1.207923] Cannot allocate resource for EISA slot 1 [ 1.207954] EISA: Detected 0 cards. [ 1.208136] cpuidle: using governor ladder [ 1.208225] cpuidle: using governor menu [ 1.208680] TCP cubic registered [ 1.208945] NET: Registered protocol family 10 [ 1.209839] NET: Registered protocol family 17 [ 1.209871] Registering the dns_resolver key type [ 1.209938] Using IPI No-Shortcut mode [ 1.210117] PM: Hibernation image not present or could not be loaded. [ 1.210137] registered taskstats version 1 [ 1.210380] Magic number: 11:857:294 [ 1.210407] ata_device dev2.0: hash matches [ 1.210411] dev2.0: hash matches [ 1.210442] misc hpet: hash matches [ 1.210472] tty tty27: hash matches [ 1.210566] rtc_cmos 00:03: setting system clock to 2011-09-28 19:15:57 UTC (1317237357) [ 1.210571] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.210574] EDD information not available. [ 1.215485] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.311223] sda: sda1 sda2 < sda5 sda6 > [ 1.311812] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.311869] Freeing unused kernel memory: 700k freed [ 1.312361] Write protecting the kernel text: 5192k [ 1.312428] Write protecting the kernel read-only data: 2148k [ 1.343965] <30>udev[66]: starting version 167 [ 1.813667] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 1.813710] 8139cp 0000:01:02.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too [ 1.848279] 8139too: 8139too Fast Ethernet driver 0.9.28 [ 1.848542] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3 [ 1.848547] PCI: setting IRQ 3 as level-triggered [ 1.848556] 8139too 0000:01:02.0: PCI INT A -> Link[LNKE] -> GSI 3 (level, low) -> IRQ 3 [ 1.848573] 8139too 0000:01:02.0: setting latency timer to 64 [ 1.849793] 8139too 0000:01:02.0: eth0: RealTek RTL8139 at 0xc100, 00:e0:4c:77:12:8d, IRQ 3 [ 2.157770] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 13.836187] <30>udev[258]: starting version 167 [ 13.841923] Adding 489468k swap on /dev/sda6. Priority:-1 extents:1 across:489468k [ 13.891159] lp: driver loaded but no devices found [ 14.234923] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr [ 14.253003] intel_rng: Firmware space is locked read-only. If you can't or [ 14.253007] intel_rng: don't want to disable this in firmware setup, and if [ 14.253009] intel_rng: you are certain that your system has a functional [ 14.253011] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 14.495168] type=1400 audit(1317237370.778:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=440 comm="apparmor_parser" [ 14.500145] type=1400 audit(1317237370.786:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=440 comm="apparmor_parser" [ 14.502452] type=1400 audit(1317237370.786:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=440 comm="apparmor_parser" [ 14.693740] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 14.694554] acpi device:04: registered as cooling_device1 [ 14.694788] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4 [ 14.735892] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 14.759619] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.922816] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 [ 15.480174] type=1400 audit(1317237371.766:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=568 comm="apparmor_parser" [ 15.482631] type=1400 audit(1317237371.766:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=568 comm="apparmor_parser" [ 15.483461] type=1400 audit(1317237371.766:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=568 comm="apparmor_parser" [ 15.525413] type=1400 audit(1317237371.810:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=570 comm="apparmor_parser" [ 15.578754] type=1400 audit(1317237371.862:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=570 comm="apparmor_parser" [ 15.601944] type=1400 audit(1317237371.886:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=570 comm="apparmor_parser" [ 15.632148] type=1400 audit(1317237371.918:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=575 comm="apparmor_parser" [ 15.856140] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0xa04713/0x0/0x0 [ 15.985950] yenta_cardbus 0000:01:04.0: CardBus bridge found [1734:1079] [ 15.985970] yenta_cardbus 0000:01:04.0: Using CSCINT to route CSC interrupts to PCI [ 15.985974] yenta_cardbus 0000:01:04.0: Routing CardBus interrupts to PCI [ 15.985981] yenta_cardbus 0000:01:04.0: TI: mfunc 0x010c1202, devctl 0x44 [ 15.986126] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input5 [ 16.207276] cfg80211: Calling CRDA to update world regulatory domain [ 16.222339] yenta_cardbus 0000:01:04.0: ISA IRQ mask 0x00d0, PCI irq 5 [ 16.222346] yenta_cardbus 0000:01:04.0: Socket status: 30000006 [ 16.222353] pci_bus 0000:01: Raising subordinate bus# of parent bus (#01) from #01 to #05 [ 16.222372] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [io 0xc000-0xdfff] [ 16.222378] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc000-0xdfff: excluding 0xc000-0xc1ff 0xc400-0xc4ff [ 16.351665] [drm] Initialized drm 1.1.0 20060810 [ 16.411414] cfg80211: World regulatory domain updated: [ 16.411423] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 16.411428] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.411433] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.411438] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 16.411443] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.411447] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 16.525058] [ 16.525070] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0xe0000000-0xefffffff] [ 16.525078] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe0000000-0xefffffff: excluding 0xe0000000-0xe07fffff 0xe4000000-0xe7ffffff [ 16.525113] yenta_cardbus 0000:01:04.0: pcmcia: parent PCI bridge window: [mem 0xa0000000-0xafffffff pref] [ 16.525118] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xafffffff: excluding 0xa0000000-0xafffffff [ 16.734406] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x200-0x20f 0x290-0x297 0x370-0x377 [ 16.736367] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 16.737122] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 16.737749] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 16.738433] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff [ 16.738522] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff [ 16.738608] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean. [ 16.738700] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 16.893720] p54pci 0000:01:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 16.947508] i915 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, low) -> IRQ 10 [ 16.947518] i915 0000:00:02.0: setting latency timer to 64 [ 16.961971] p54pci 0000:01:01.0: Cannot find firmware (isl3886pci) [ 16.971879] p54pci 0000:01:01.0: PCI INT A disabled [ 16.971893] p54pci: probe of 0000:01:01.0 failed with error -2 [ 16.975717] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 16.975725] [drm] Driver supports precise vblank timestamp query. [ 17.037839] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 17.039451] [drm] initialized overlay support [ 17.324768] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 17.460728] fbcon: inteldrmfb (fb0) is primary device [ 17.462355] Console: switching to colour frame buffer device 160x50 [ 17.462423] fb0: inteldrmfb frame buffer device [ 17.462426] drm: registered panic notifier [ 17.462680] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 17.462748] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5 [ 17.462788] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 18.312039] intel8x0_measure_ac97_clock: measured 55290 usecs (2664 samples) [ 18.312045] intel8x0: clocking to 48000 [ 18.610856] ppdev: user-space parallel port driver [ 18.780096] fixme: max PWM is zero. [ 22.613435] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 [ 25.776043] eth0: no IPv6 routers present

από **dimitris100** » 28 Σεπ 2011, 23:04

ίσως κάποια στιγμή το ndiswraper, αλλά α) και πολύ πριν από αυτό δεν έβρισκε δίκτυο και β) δεν κατάφερα να το εγκαταστήσω ολόκληρπ μέσα από το terminal, απ'όσο θυμάμαι. Ουτε το wifi radar βρίσκει τίποτα....

από **xaris2335** » 28 Σεπ 2011, 23:17

ωραία αφού δεν έγινε εγκατάσταση θα δουλέψει.
για δώσε αποτέλεσμα απο

Κώδικας: Επιλογή όλων: ls /lib/firmware/isl3886pci

από **dimitris100** » 28 Σεπ 2011, 23:21

????

s /lib/firmware/isl3886pci

Κώδικας: Επιλογή όλων: dimitris@dimitris-AMILO-L-Series:~$ ls /lib/firmware/isl3886pci ls: cannot access /lib/firmware/isl3886pci: No such file or directory

από **xaris2335** » 28 Σεπ 2011, 23:24

dimitris100 έγραψε:????

s /lib/firmware/isl3886pci
Κώδικας: Επιλογή όλων
dimitris@dimitris-AMILO-L-Series:~$ ls /lib/firmware/isl3886pci ls: cannot access /lib/firmware/isl3886pci: No such file or directory

Λογικό και αναμενόμενο ποια έκδοση κέρνελ έχεις δώσε

Κώδικας: Επιλογή όλων: uname -r

από **dimitris100** » 28 Σεπ 2011, 23:25

2.6.38-11-generic

από **xaris2335** » 28 Σεπ 2011, 23:37

ωραία κατέβασε αυτό, κάνε αυτά που λέει εδώ, επανεκκίνηση και είσαι έτοιμος.

να γιατί πρέπει να τα κάνεις στο λέει

dimitris100 έγραψε:[ 16.961971] p54pci 0000:01:01.0: Cannot find firmware (isl3886pci)
[ 16.971879] p54pci 0000:01:01.0: PCI INT A disabled
[ 16.971893] p54pci: probe of 0000:01:01.0 failed with error -2

Off topic:
εγώ λέω να το αλλάξουμε όνομα το φόρουμ και να το κάνουμε Λίνουξ ανακύκλωσης Υπολογιστών :lol: