Πρόβλημα με WG111T Wireless USB Adapter

[mkoukos]

Γεια σας,
Μόλις εγκατέστησα το ubuntu 9.10 στο υπολογιστή μου στον οποίο είχα προεγκατεστημένα και τα Windows XP (Dual Boot). Μετά την εγκατάσταση δείχνουν όλα να δουλεύουν σωστά (κάρτα γραφικών, κάρτα ήχου,...) αλλά έχω πρόβλημα με το ασύρματο internet. Έχω ένα WG111T Wireless USB Adapter της NETGEAR το οποίο στα XP δουλεύει κανονικά ενώ στα Ububtu όχι. Έψαξα σε διάφορα foroum, δοκίμασα διάφορα πράγματα αλλά τίποτα. Μπορεί κάποιος να με βοηθήσει γιατί έχω απελπιστεί με την όλη ιστορία??
Πληκτρολογώντας lsusb μου εμφανίζει το παρακάτω:
Bus 001 Device 003: ID 1385:4251 Netgear,Inc WG111T (no firmware)

Τι σημαίνει το "no firmware"? Μήπως δεν είναι συμβατό με linux?

Αν τελικά δεν μπορώ να κάνω κάτι με το συγκεκριμένο, μπορείτε να μου προτείνετε έναν άλλο usb adaptor να αγοράσω που να δουλεύει σίγουρα?

Σας ευχαριστώ εκ των προτέρων για την όποια βοήθεια....

[linuxman]

Δες στο Σύστημα/Διαχείριση συστήματος/Οδηγοί υλικού βλέπεις τίποτα ?
Πρέπει να έχεις καλώδιο συνδεδεμένο για να το κατεβάσει .

[MakisM1]

Εγω εχω την Netgear WPN111S. Και αυτη no firmware δινει, δεν δουλευει, ουτε προκειται να δουλεψει... Υπαρχει, σαν λυση απελπισιας η μεθοδος του ndiswrapper, αλλα για 15-20€ καλυτερα να παρεις μια που δουλευει out of the box.

Εγω εχω ενα bridge και δουλευω το WiFi οποτε δεν πιζομαι να βαλω καρτα USB. Αν βρει καποιος ενα adaptor που δουλευει εγγυημενα out of the box και υπαρχει σε καποιο απο τα γνωστα μαγαζια, θα παω να την παρω...

Φιλικα

ΜακηςΜ

[logari81]

@MakisM1
δωσε το pci id της συσκευής σου για να μπορεσουμε να συγκρινουμε αν ειναι όντως ιδιες οι καρτες σας.

Υπάρχουν αλλα 2 αντιστοιχα θεματα που μου ειχαν ξεφυγει:
viewtopic.php?f=39&t=4882&p=46837&hilit=1385%3A4251#p46837
viewtopic.php?f=39&t=996&p=8768&hilit=1385%3A4251#p8768
ποσταρε το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

Επισης υπάρχει μια αναφορα εδω
http://wiki.debian.org/ar5523
στο οδηγό ar5523 ο οποιος φαινεται να υποστηριζει αυτην την συσκευη. Δυστυχώς ο οδηγος αυτος δεν εχει γινει ακομα port σε σχετικα καινουριους πυρήνες. Αναμενουμε τις εξελιξεις.

EDIT: βλεπω οτι υπαρχει ήδη ενα patch προσαρμογής του ar5523 στον πυρηνα 2.6.32
http://svn.berlios.de/svnroot/repos/ful ... 6.32.patch
ισως μπορουμε να κανουμε κατι.

[MakisM1]

Εντολη lsusb:

Κώδικας: Επιλογή όλων

gerry@gerry-desktop:~$ lsusb
Bus 001 Device 004: ID 1385:5f01 Netgear, Inc WPN111 (no firmware)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 045e:0750 Microsoft Corp.
Bus 002 Device 002: ID 045e:0737 Microsoft Corp.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
gerry@gerry-desktop:~$


Device ID: ID 1385:5f01

Απο πληροφοριες στ Ιντερνετ:

Κώδικας: Επιλογή όλων

Chipset: Atheros USB
* pciid: 1358:5f01
* Driver: Windows XP driver available on the Netgear CD: netwpn11.inf + wpn111.sys + ar5523.bin

Εντολη dmesg

Κώδικας: Επιλογή όλων

[ 0.456072] Total of 2 processors activated (11225.75 BogoMIPS).
[ 0.456122] CPU0 attaching sched-domain:
[ 0.456126] domain 0: span 0-1 level SIBLING
[ 0.456129] groups: 0 1
[ 0.456139] CPU1 attaching sched-domain:
[ 0.456141] domain 0: span 0-1 level SIBLING
[ 0.456144] groups: 1 0
[ 0.456246] net_namespace: 776 bytes
[ 0.456260] Booting paravirtualized kernel on bare hardware
[ 0.456497] Time: 10:34:04 Date: 12/11/09
[ 0.456497] regulator: core version 0.5
[ 0.456497] NET: Registered protocol family 16
[ 0.456497] EISA bus registered
[ 0.456497] ACPI: bus type pci registered
[ 0.456497] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.456497] PCI: Using configuration type 1 for base access
[ 0.457617] ACPI: EC: Look up EC in DSDT
[ 0.468524] ACPI: Interpreter enabled
[ 0.468532] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.468561] ACPI: Using IOAPIC for interrupt routing
[ 0.477364] ACPI: No dock devices found.
[ 0.477380] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.477441] pci 0000:00:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.477594] pci 0000:00:1d.0: reg 20 io port: [0xef00-0xef1f]
[ 0.477647] pci 0000:00:1d.1: reg 20 io port: [0xef20-0xef3f]
[ 0.477700] pci 0000:00:1d.2: reg 20 io port: [0xef40-0xef5f]
[ 0.477753] pci 0000:00:1d.3: reg 20 io port: [0xef80-0xef9f]
[ 0.477813] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
[ 0.477859] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.477865] pci 0000:00:1d.7: PME# disabled
[ 0.477957] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.477964] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
[ 0.477968] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
[ 0.477990] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.477997] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.478005] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.478012] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.478020] pci 0000:00:1f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.478028] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.478079] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.478122] pci 0000:00:1f.5: reg 10 io port: [0xe800-0xe8ff]
[ 0.478129] pci 0000:00:1f.5: reg 14 io port: [0xee80-0xeebf]
[ 0.478136] pci 0000:00:1f.5: reg 18 32bit mmio: [0xfebff800-0xfebff9ff]
[ 0.478144] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xfebff400-0xfebff4ff]
[ 0.478167] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.478172] pci 0000:00:1f.5: PME# disabled
[ 0.478213] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
[ 0.478221] pci 0000:01:00.0: reg 14 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.478242] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.478291] pci 0000:00:01.0: bridge 32bit mmio: [0xfc800000-0xfe8fffff]
[ 0.478296] pci 0000:00:01.0: bridge 32bit mmio pref: [0xcff00000-0xefefffff]
[ 0.478328] pci 0000:02:01.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.478339] pci 0000:02:01.0: reg 18 io port: [0xcf80-0xcf9f]
[ 0.478365] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.478370] pci 0000:02:01.0: PME# disabled
[ 0.478409] pci 0000:00:03.0: bridge io port: [0xc000-0xcfff]
[ 0.478413] pci 0000:00:03.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.478454] pci 0000:03:03.0: reg 10 32bit mmio: [0xfeaff800-0xfeafffff]
[ 0.478462] pci 0000:03:03.0: reg 14 io port: [0xdc00-0xdc7f]
[ 0.478496] pci 0000:03:03.0: supports D2
[ 0.478498] pci 0000:03:03.0: PME# supported from D2 D3hot D3cold
[ 0.478503] pci 0000:03:03.0: PME# disabled
[ 0.478537] pci 0000:03:04.0: reg 10 io port: [0xdf00-0xdf3f]
[ 0.478544] pci 0000:03:04.0: reg 14 io port: [0xdfa0-0xdfaf]
[ 0.478552] pci 0000:03:04.0: reg 18 io port: [0xd880-0xd8ff]
[ 0.478559] pci 0000:03:04.0: reg 1c 32bit mmio: [0xfeafe000-0xfeafefff]
[ 0.478567] pci 0000:03:04.0: reg 20 32bit mmio: [0xfeac0000-0xfeadffff]
[ 0.478587] pci 0000:03:04.0: supports D1
[ 0.478627] pci 0000:00:1e.0: transparent bridge
[ 0.478633] pci 0000:00:1e.0: bridge io port: [0xd000-0xdfff]
[ 0.478638] pci 0000:00:1e.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.478657] bus 00 -> node 0
[ 0.478666] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.478829] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.479144] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.486896] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.487034] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.487172] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.487307] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.487441] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.487576] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.487714] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.487851] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.488035] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - C6, should be B7 [20080926]
[ 0.488069] ACPI: WMI: Mapper loaded
[ 0.488173] SCSI subsystem initialized
[ 0.488199] libata version 3.00 loaded.
[ 0.488199] usbcore: registered new interface driver usbfs
[ 0.488199] usbcore: registered new interface driver hub
[ 0.488199] usbcore: registered new device driver usb
[ 0.488199] PCI: Using ACPI for IRQ routing
[ 0.496014] Bluetooth: Core ver 2.13
[ 0.496043] NET: Registered protocol family 31
[ 0.496043] Bluetooth: HCI device and connection manager initialized
[ 0.496043] Bluetooth: HCI socket layer initialized
[ 0.496043] NET: Registered protocol family 8
[ 0.496043] NET: Registered protocol family 20
[ 0.496052] NetLabel: Initializing
[ 0.496055] NetLabel: domain hash size = 128
[ 0.496057] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.496075] NetLabel: unlabeled traffic allowed by default
[ 0.496186] hpet clockevent registered
[ 0.496191] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.496198] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.496205] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.500101] AppArmor: AppArmor Filesystem Enabled
[ 0.508014] pnp: PnP ACPI init
[ 0.508030] ACPI: bus type pnp registered
[ 0.513452] pnp: PnP ACPI: found 14 devices
[ 0.513455] ACPI: ACPI bus type pnp unregistered
[ 0.513460] PnPBIOS: Disabled by ACPI PNP
[ 0.513478] system 00:0a: ioport range 0x680-0x6ff has been reserved
[ 0.513482] system 00:0a: ioport range 0x290-0x297 has been reserved
[ 0.513491] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.513495] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.513498] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.513502] system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.513506] system 00:0b: iomem range 0xffb00000-0xffbfffff could not be reserved
[ 0.513515] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.513519] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.513528] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.513531] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.513535] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.513538] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved
[ 0.513542] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.548319] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.548323] pci 0000:00:01.0: IO window: disabled
[ 0.548329] pci 0000:00:01.0: MEM window: 0xfc800000-0xfe8fffff
[ 0.548334] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000efefffff
[ 0.548342] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 0.548345] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 0.548351] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 0.548355] pci 0000:00:03.0: PREFETCH window: disabled
[ 0.548362] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.548366] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.548373] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 0.548378] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.548400] pci 0000:00:1e.0: setting latency timer to 64
[ 0.548405] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.548408] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.548411] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.548413] bus: 01 index 1 mmio: [0xfc800000-0xfe8fffff]
[ 0.548416] bus: 01 index 2 mmio: [0xcff00000-0xefefffff]
[ 0.548419] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.548422] bus: 02 index 0 io port: [0xc000-0xcfff]
[ 0.548425] bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.548427] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.548430] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.548432] bus: 03 index 0 io port: [0xd000-0xdfff]
[ 0.548435] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.548438] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.548440] bus: 03 index 3 io port: [0x00-0xffff]
[ 0.548443] bus: 03 index 4 mmio: [0x000000-0xffffffff]
[ 0.548455] NET: Registered protocol family 2
[ 0.564082] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.564484] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.565329] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.565875] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.565879] TCP reno registered
[ 0.572138] NET: Registered protocol family 1
[ 0.572317] checking if image is initramfs... it is
[ 0.996314] Switched to high resolution mode on CPU 1
[ 1.000041] Switched to high resolution mode on CPU 0
[ 1.202041] Freeing initrd memory: 7376k freed
[ 1.202114] cpufreq: No nForce2 chipset.
[ 1.202284] audit: initializing netlink socket (disabled)
[ 1.202307] type=2000 audit(1260527644.201:1): initialized
[ 1.210468] highmem bounce pool size: 64 pages
[ 1.210476] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.212146] VFS: Disk quotas dquot_6.5.1
[ 1.212231] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.213078] fuse init (API version 7.10)
[ 1.213189] msgmni has been set to 1698
[ 1.213636] alg: No test for stdrng (krng)
[ 1.213657] io scheduler noop registered
[ 1.213662] io scheduler anticipatory registered
[ 1.213666] io scheduler deadline registered
[ 1.213698] io scheduler cfq registered (default)
[ 1.213820] pci 0000:01:00.0: Boot video device
[ 1.218496] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.218509] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.218674] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.218678] ACPI: Power Button (FF) [PWRF]
[ 1.218748] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.218751] ACPI: Power Button (CM) [PWRB]
[ 1.219193] processor ACPI_CPU:00: registered as cooling_device0
[ 1.219444] processor ACPI_CPU:01: registered as cooling_device1
[ 1.222771] isapnp: Scanning for PnP cards...
[ 1.576368] isapnp: No Plug & Play device found
[ 1.588181] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.588275] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.588368] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.588703] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.588855] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.589925] brd: module loaded
[ 1.590366] loop: module loaded
[ 1.590475] Fixed MDIO Bus: probed
[ 1.590483] PPP generic driver version 2.4.2
[ 1.590565] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.590611] Driver 'sd' needs updating - please use bus_type methods
[ 1.590624] Driver 'sr' needs updating - please use bus_type methods
[ 1.590724] ata_piix 0000:00:1f.1: version 2.12
[ 1.590736] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 1.590750] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.590813] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.590950] scsi0 : ata_piix
[ 1.591102] scsi1 : ata_piix
[ 1.593163] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 1.593166] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 1.932462] ata1.00: ATA-6: ST3160023A, 3.06, max UDMA/100
[ 1.932465] ata1.00: 312581808 sectors, multi 16: LBA48
[ 1.939354] ata1.01: ATA-8: WDC WD1600AAJB-00J3A0, 01.03E01, max UDMA/133
[ 1.939357] ata1.01: 312581808 sectors, multi 16: LBA48
[ 1.952411] ata1.00: configured for UDMA/100
[ 1.968815] ata1.01: configured for UDMA/100
[ 2.132295] ata2.00: ATAPI: TEAC DV-W58D, 1.08, max UDMA/33
[ 2.132333] ata2.01: ATAPI: ASUS CRW-5232AS, 1.0, max UDMA/33
[ 2.140239] ata2.00: configured for UDMA/33
[ 2.148374] ata2.01: configured for UDMA/33
[ 2.149226] scsi 0:0:0:0: Direct-Access ATA ST3160023A 3.06 PQ: 0 ANSI: 5
[ 2.149362] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.149385] sd 0:0:0:0: [sda] Write Protect is off
[ 2.149388] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.149425] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.149512] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.149532] sd 0:0:0:0: [sda] Write Protect is off
[ 2.149535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.149571] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.149576] sda: sda1
[ 2.160204] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.160279] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.160375] scsi 0:0:1:0: Direct-Access ATA WDC WD1600AAJB-0 01.0 PQ: 0 ANSI: 5
[ 2.160494] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.160515] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.160519] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.160555] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.160628] sd 0:0:1:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.160648] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.160651] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.160687] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.160691] sdb: sdb1 sdb2 sdb3 < sdb5 sdb6 >
[ 2.211277] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.211339] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.217871] scsi 1:0:0:0: CD-ROM TEAC DV-W58D 1.08 PQ: 0 ANSI: 5
[ 2.223797] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.223801] Uniform CD-ROM driver Revision: 3.20
[ 2.223935] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.223996] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 2.224471] scsi 1:0:1:0: CD-ROM ASUS CRW-5232AS 1.0 PQ: 0 ANSI: 5
[ 2.226321] sr1: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
[ 2.226425] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 2.226483] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 2.226532] sata_promise 0000:03:04.0: version 2.12
[ 2.226552] sata_promise 0000:03:04.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.240136] scsi2 : sata_promise
[ 2.240237] scsi3 : sata_promise
[ 2.240332] scsi4 : sata_promise
[ 2.240385] ata3: SATA max UDMA/133 mmio m4096@0xfeafe000 ata 0xfeafe200 irq 23
[ 2.240390] ata4: SATA max UDMA/133 mmio m4096@0xfeafe000 ata 0xfeafe280 irq 23
[ 2.240393] ata5: PATA max UDMA/133 mmio m4096@0xfeafe000 ata 0xfeafe300 irq 23
[ 2.560026] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.880024] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.036941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.036970] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 3.036990] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.036995] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.037083] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.041008] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.041016] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 3.041024] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 3.052015] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.052114] usb usb1: configuration #1 chosen from 1 choice
[ 3.052161] hub 1-0:1.0: USB hub found
[ 3.052173] hub 1-0:1.0: 8 ports detected
[ 3.052326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.052351] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.052402] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.052411] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.052415] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.052479] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.052510] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ef00
[ 3.052604] usb usb2: configuration #1 chosen from 1 choice
[ 3.052639] hub 2-0:1.0: USB hub found
[ 3.052649] hub 2-0:1.0: 2 ports detected
[ 3.052759] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.052766] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.052770] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.052825] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.052854] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ef20
[ 3.052945] usb usb3: configuration #1 chosen from 1 choice
[ 3.052988] hub 3-0:1.0: USB hub found
[ 3.052998] hub 3-0:1.0: 2 ports detected
[ 3.053107] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.053114] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.053118] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.053187] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.053218] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ef40
[ 3.053317] usb usb4: configuration #1 chosen from 1 choice
[ 3.053351] hub 4-0:1.0: USB hub found
[ 3.053361] hub 4-0:1.0: 2 ports detected
[ 3.053465] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.053472] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.053476] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.053535] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.053556] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ef80
[ 3.053653] usb usb5: configuration #1 chosen from 1 choice
[ 3.053686] hub 5-0:1.0: USB hub found
[ 3.053695] hub 5-0:1.0: 2 ports detected
[ 3.053869] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.053872] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.054578] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.056063] mice: PS/2 mouse device common for all mice
[ 3.068094] rtc_cmos 00:02: RTC can wake from S4
[ 3.068146] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.068172] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 3.068272] device-mapper: uevent: version 1.0.3
[ 3.068415] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.068532] device-mapper: multipath: version 1.0.5 loaded
[ 3.068538] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.068660] EISA: Probing bus 0 at eisa.0
[ 3.068701] EISA: Detected 0 cards.
[ 3.068786] cpuidle: using governor ladder
[ 3.068791] cpuidle: using governor menu
[ 3.069542] TCP cubic registered
[ 3.069634] NET: Registered protocol family 10
[ 3.070242] lo: Disabled Privacy Extensions
[ 3.070751] NET: Registered protocol family 17
[ 3.070778] Bluetooth: L2CAP ver 2.11
[ 3.070781] Bluetooth: L2CAP socket layer initialized
[ 3.070785] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.070787] Bluetooth: SCO socket layer initialized
[ 3.070848] Bluetooth: RFCOMM socket layer initialized
[ 3.070866] Bluetooth: RFCOMM TTY layer initialized
[ 3.070870] Bluetooth: RFCOMM ver 1.10
[ 3.070948] Using IPI No-Shortcut mode
[ 3.071081] registered taskstats version 1
[ 3.071241] Magic number: 5:950:577
[ 3.071334] rtc_cmos 00:02: setting system clock to 2009-12-11 10:34:07 UTC (1260527647)
[ 3.071338] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.071341] EDD information not available.
[ 3.071878] Freeing unused kernel memory: 532k freed
[ 3.072085] Write protecting the kernel text: 4120k
[ 3.072157] Write protecting the kernel read-only data: 1524k
[ 3.090651] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.366736] Floppy drive(s): fd0 is 1.44M
[ 3.385720] FDC 0 is a post-1991 82077
[ 3.409142] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 3.409148] Copyright (c) 1999-2006 Intel Corporation.
[ 3.409211] e1000 0000:02:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.409225] e1000 0000:02:01.0: setting latency timer to 64
[ 3.525699] ohci1394 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.564230] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:a6:34:28:62
[ 3.579006] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 3.621058] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.802715] usb 2-1: configuration #1 chosen from 1 choice
[ 3.832328] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 3.976007] usbcore: registered new interface driver hiddev
[ 3.991954] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
[ 4.047825] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 4.047902] usbcore: registered new interface driver usbhid
[ 4.047916] usbhid: v2.6:USB HID core driver
[ 4.052569] usb 2-2: new low speed USB device using uhci_hcd and address 3
[ 4.212554] PM: Starting manual resume from disk
[ 4.212559] PM: Resume from partition 8:22
[ 4.212562] PM: Checking hibernation image.
[ 4.212823] PM: Resume from disk failed.
[ 4.230506] usb 2-2: configuration #1 chosen from 1 choice
[ 4.239408] kjournald starting. Commit interval 5 seconds
[ 4.239429] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.249822] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input5
[ 4.281774] generic-usb 0003:045E:0750.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input0
[ 4.309621] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input6
[ 4.309756] generic-usb 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:1d.0-2/input1
[ 4.868167] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000520d15]
[ 8.410136] udev: starting version 141
[ 8.676823] parport_pc 00:09: reported by Plug and Play ACPI
[ 8.676942] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 8.743311] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.919480] Linux agpgart interface v0.103
[ 9.050529] agpgart-intel 0000:00:00.0: Intel i875 Chipset
[ 9.054395] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
[ 9.096978] intel_rng: FWH not detected
[ 9.406747] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 9.575045] nvidia: module license 'NVIDIA' taints kernel.
[ 9.835475] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.836429] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.16 Sat Jan 24 19:42:59 PST 2009
[ 9.852152] EDAC MC: Ver: 2.1.0 Dec 1 2009
[ 9.886432] ppdev: user-space parallel port driver
[ 9.941622] iTCO_vendor_support: vendor-support=0
[ 9.944742] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 9.944885] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
[ 9.944974] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.972367] EDAC i82875p: i82875p init one
[ 9.972414] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff]
[ 9.973960] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 9.973967] pci 0000:00:01.0: IO window: disabled
[ 9.973975] pci 0000:00:01.0: MEM window: 0xfc800000-0xfe8fffff
[ 9.973983] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000efefffff
[ 9.973995] pci 0000:00:03.0: PCI bridge, secondary bus 0000:02
[ 9.974001] pci 0000:00:03.0: IO window: 0xc000-0xcfff
[ 9.974010] pci 0000:00:03.0: MEM window: 0xfe900000-0xfe9fffff
[ 9.974016] pci 0000:00:03.0: PREFETCH window: disabled
[ 9.974029] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 9.974036] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 9.974044] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 9.974051] pci 0000:00:1e.0: PREFETCH window: disabled
[ 9.974803] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0
[ 9.975061] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED)
[ 10.133847] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.133975] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 10.503905] intel8x0: white list rate for 1043:80f3 is 48000
[ 10.673020] lp0: using parport0 (interrupt-driven).
[ 10.702634] w83627hf: Found W83627THF chip at 0x290
[ 10.702751] w83627hf w83627hf.656: Reading VID from GPIO5
[ 10.863139] Adding 3903752k swap on /dev/sdb6. Priority:-1 extents:1 across:3903752k
[ 11.434937] EXT3 FS on sdb2, internal journal
[ 12.353391] kjournald starting. Commit interval 5 seconds
[ 12.356296] EXT3 FS on sdb5, internal journal
[ 12.356304] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.721819] type=1505 audit(1260520457.148:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2134
[ 12.778183] type=1505 audit(1260520457.204:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2138
[ 12.778392] type=1505 audit(1260520457.204:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2138
[ 12.778464] type=1505 audit(1260520457.204:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2138
[ 12.778517] type=1505 audit(1260520457.204:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2138
[ 12.932269] type=1505 audit(1260520457.360:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2143
[ 12.932539] type=1505 audit(1260520457.360:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2143
[ 12.968864] type=1505 audit(1260520457.396:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2147
[ 17.907686] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 17.907692] vboxdrv: Successfully done.
[ 17.907696] vboxdrv: Found 2 processor cores.
[ 17.907859] vboxdrv: fAsync=0 offMin=0x3f8 offMax=0x3468
[ 17.907957] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 17.907962] vboxdrv: Successfully loaded version 3.0.12 (interface 0x00110000).
[ 19.140058] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.140063] Bluetooth: BNEP filters: protocol multicast
[ 19.157264] Bridge firewalling registered
[ 21.244751] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 21.244777] agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
[ 21.244838] nvidia 0000:01:00.0: putting AGP V3 device into 8x mode
[ 24.574653] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 24.576439] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 24.576758] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 34.960011] eth0: no IPv6 routers present
[12678.896072] usb 1-7: new high speed USB device using ehci_hcd and address 4
[12679.029221] usb 1-7: configuration #1 chosen from 1 choice
[12763.834390] UDF-fs: Partition marked readonly; forcing readonly mount
[12763.865915] UDF-fs INFO UDF: Mounting volume 'DVDVIDEO', timestamp 2009/11/14 01:26 (1078)
gerry@gerry-desktop:~$


Φιλικα

ΜακηςΜ

[logari81]

Device ID: ID 1385:5f01

όχι δυστυχως δεν εισαι στην λιστα του ar5523, μαλλον ειναι αρκετα διαφορετικη η καρτα σου παρολο που η εμπορικη της ονομασια ειναι πολύ παρομοια.

[O_BETATZIS]

Exw akribws to idio problima
+den exw elliniko pliktrologio
+eimai newbie kai asxetos

=> BOH8EIA!

[logari81]

Exw akribws to idio problima

πως το ξερεις; Μονο αν υπαρχει το νουμερο 1385:4251 στο αποτελεσμα της εντολής lsusb εχεις ακριβως το ιδιο προβλημα. Μπορεις να το επιβεβαιωσεις;

[O_BETATZIS]

Ναι έχω το ίδιο πρόβλημα:

Bus 001 Device 002: ID 1385:4251 Netgear, Inc WG111T (no firmware)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

ευχαριστώ

[logari81]

ωραια, δοκιμασε αυτο:
viewtopic.php?f=39&t=9004#p91542