Σύνδεση με Sagem Fast 840 του Connex

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό Tsili32 » 05 Ιαν 2010, 13:51

Χρόνια πολλά και καλή χρονιά σε όλους. Ήθελα να ζητήσω την άποψή σας για πρόβλημα που αντιμετωπίζω με σύνδεση στο internet. Μόλις έχω εγκαταστήσει Ubuntu 9.10 desktop i386. Κατά την εκκίνηση του υπολογιστή γίνεται dual boot και επιλέγω μεταξύ Ubuntu και Windows XP. Η σύνδεση στο internet με XP γίνεται κανονικά όχι όμως με το ubuntu. Διάβασα παρόμοια προβλήματα από το forum με τίτλους: "Συνδεση με sagem fast tou connex [ΕΠΙΛΥΘΗΚΕ]" και "ubuntu 9.10 και ubudsl." που βρίσκονται στις σελίδες:
viewtopic.php?f=39&t=2191&p=20761&hilit=%CF%83%CF%8D%CE%BD%CE%B4%CE%B5%CF%83%CE%B7+internet+sagem#p20761
viewtopic.php?f=39&t=8043
αντίστοιχα. Έκανα και εγώ εγκατάσταση του προγράμματος Ubudsl για Ubuntu 9.10 που κατέβασα από τις παραπάνω σελίδες. Ωστόσο όταν αποσύνδεα και ξανασύνδεα το modem για να ολοκληρωθεί η εγκατάσταση έβγαζε το εξής μήνυμα: "failed to synchronize modem". Υπάρχει κάτι άλλο για την εγκατάσταση του modem που θα μπορούσα να εφαρμόσω; Ευχαριστώ.
Tsili32
babeTUX
babeTUX
 
Δημοσιεύσεις: 14
Εγγραφή: 04 Ιαν 2010, 17:00
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό logari81 » 05 Ιαν 2010, 19:09

Δώσε μας το αποτελεσμα της εντολης
Κώδικας: Επιλογή όλων
lsusb

για να δουμε πιο ακριβως μοντεμ εχεις. Κανονικα περα απο την εγκατασταση του ubudsl δεν θα επρεπε να απαιτειται κατι αλλο.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό Tsili32 » 06 Ιαν 2010, 12:59

Το αποτέλεσμα της εντολής είναι:

Κώδικας: Επιλογή όλων
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 041e:4067 Creative Technology, Ltd
Bus 004 Device 002: ID 1110:9041 Analog Devices Canada, Ltd (Allied Telesyn)
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:6204 Hewlett-Packard DeskJet 5150c
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Ο επεξεργαστής είναι Intel Pentium 4CPU 3GHz, μνήμη 1,25GB, κάρτα γραφικών ATI Radeon 9100 128MB.
Τελευταία επεξεργασία από logari81 και 07 Ιαν 2010, 15:58, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: προσθήκη bbcode
Tsili32
babeTUX
babeTUX
 
Δημοσιεύσεις: 14
Εγγραφή: 04 Ιαν 2010, 17:00
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό logari81 » 06 Ιαν 2010, 19:41

Tsili32 έγραψε:Bus 004 Device 002: ID 1110:9041 Analog Devices Canada, Ltd (Allied Telesyn)

το μοντεμ αυτο υποστηρίζεται απο το ubudsl δεν θα επρεπε να υπαρχει προβλημα, συνδεσε το, ανοιξε τον υπολογιστη και ξεκινησε το ubudsl και δες τι σου λεει, βγαλε μας κανενα screenshot για να δουμε τι λεει. (μπορεις να το ανεβασεις π.χ. εδω http://imageshack.us/)
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό Tsili32 » 06 Ιαν 2010, 23:50

Στην σελίδα http://img514.imageshack.us/gal.php?g=screenshot51a.png ανέβασα 7 screenshots. Τα τέσσερα αφορούν την απάντηση στην εκκίνηση του Ubudsl Applet και ξεχωρίζουν από τα υπόλοιπα γιατί γράφουν "HELP, Important: Below are described common troubles .....μπλα μπλα....because one of them may happen to you".
Τα υπόλοιπα 3 screenshots αφορούν α) την εμφάνιση του network connection στην επιλογή DSL, β) εμφάνιση ρυθμίσεων που έχει το modem και γ) το αποτέλεσμα όταν πατάω σύνδεση από το εικονίδιο του modem (syncronization failed) και τα έχω ανεβάσει μήπως και αυτά βοηθήσουν. Ελπίζω να μπορείτε να τα δείτε γιατί δεν έχω καλή σχέση με προγράμματα. Απλά πήγα εδώ http://imageshack.us/ και έκανα upload. Αν δεν είναι προσβάσιμα θα παρακαλέσω για να μου πείτε άλλο τρόπο να τα εμφανίσω.
Tsili32
babeTUX
babeTUX
 
Δημοσιεύσεις: 14
Εγγραφή: 04 Ιαν 2010, 17:00
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό logari81 » 07 Ιαν 2010, 16:13

Μια χαρα φαινονται τα screenshots, δώσε μας το αποτελεσμα των εντολων
Κώδικας: Επιλογή όλων
dmesg
lsmod

επισης εδώ:
http://img145.imageshack.us/i/screenshot50v.png/
ο χρηστης και ο κωδικος πρεπει να ειναι αυτοι που σου δωσανε απο την otenet κι όχι αυτα που εχεις στο Ubuntu.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό Tsili32 » 07 Ιαν 2010, 16:55

Το αποτέλεσμα της εντολής "lsmod" είναι:
Κώδικας: Επιλογή όλων
kostas@kostas:~$ lsmod
Module Size Used by
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
snd_usb_audio 84224 1
ac97_bus 1532 1 snd_ac97_codec
snd_usb_lib 16284 1 snd_usb_audio
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_hwdep 7200 1 snd_usb_audio
snd_seq_dummy 2656 0
snd_pcm 75296 4 snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
snd_seq_oss 28576 0
snd_seq_midi 6432 0
snd_rawmidi 22208 2 snd_usb_lib,snd_seq_midi
iptable_filter 3100 0
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ip_tables 11692 1 iptable_filter
binfmt_misc 8356 1
ueagle_atm 29844 0
usbatm 15580 1 ueagle_atm
ppdev 6688 0
snd 59204 18 snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
shpchp 32272 0
x_tables 16544 1 ip_tables
lp 8964 0
parport_pc 31940 1
usblp 12636 0
atm 38836 1 usbatm
parport 35340 3 ppdev,lp,parport_pc
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
soundcore 7264 1 snd
usbhid 38208 0
radeon 636000 2
ttm 36212 1 radeon
floppy 54916 0
drm 159584 4 radeon,ttm
i2c_algo_bit 5760 1 radeon
intel_agp 27484 1
agpgart 34988 3 ttm,drm,intel_agp


Το αποτέλεσμα της "dmesg" αν το βάλω σε Word είναι περίπου 15 σελίδες. Να κάνω επικόλληση εδώ ή μήπως θα υπάρξει πρόβλημα; Επίσης έχω διορθώσει και τους κωδικούς. Έβαλα τους κωδικούς από OTENET.
Τελευταία επεξεργασία από logari81 και 07 Ιαν 2010, 18:31, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: προσθήκη bbcode
Tsili32
babeTUX
babeTUX
 
Δημοσιεύσεις: 14
Εγγραφή: 04 Ιαν 2010, 17:00
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό logari81 » 07 Ιαν 2010, 18:33

Tsili32 έγραψε:αν το βάλω σε Word

... σε OpenOfficeWritter ηθελες να πεις ;)

ναι βαλτο εδω αλλα μεσα σε
Κώδικας: Επιλογή όλων
[code][/code]

viewtopic.php?f=2&t=396

αν δεν χωραει σε ενα ποστ χωρισε το σε 2.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό Tsili32 » 07 Ιαν 2010, 23:55

ΟΚ. Το αποτέλεσμα της dmesg είναι:

Κώδικας: Επιλογή όλων
[ 0.182078] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.182086] pci 0000:01:00.0: reg 14 io port: [0xa800-0xa8ff]
[ 0.182093] pci 0000:01:00.0: reg 18 32bit mmio: [0xff0f0000-0xff0fffff]
[ 0.182111] pci 0000:01:00.0: reg 30 32bit mmio: [0xff0c0000-0xff0dffff]
[ 0.182135] pci 0000:01:00.0: supports D1 D2
[ 0.182179] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.182184] pci 0000:00:01.0: bridge 32bit mmio: [0xff000000-0xff0fffff]
[ 0.182189] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd7f00000-0xf7efffff]
[ 0.182235] pci 0000:02:05.0: reg 10 io port: [0x800b800-0x800b8ff]
[ 0.182244] pci 0000:02:05.0: reg 14 32bit mmio: [0xff1ffc00-0xff1ffcff]
[ 0.182288] pci 0000:02:05.0: supports D1 D2
[ 0.182290] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.182295] pci 0000:02:05.0: PME# disabled
[ 0.182336] pci 0000:00:1e.0: transparent bridge
[ 0.182341] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[ 0.182347] pci 0000:00:1e.0: bridge 32bit mmio: [0xff100000-0xff1fffff]
[ 0.182363] pci_bus 0000:00: on NUMA node 0
[ 0.182369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.182474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.184910] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.185051] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185185] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185319] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185453] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.185589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.185724] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.185857] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.186116] SCSI subsystem initialized
[ 0.186163] libata version 3.00 loaded.
[ 0.186163] usbcore: registered new interface driver usbfs
[ 0.186163] usbcore: registered new interface driver hub
[ 0.186163] usbcore: registered new device driver usb
[ 0.186163] ACPI: WMI: Mapper loaded
[ 0.186163] PCI: Using ACPI for IRQ routing
[ 0.186163] pci 0000:02:05.0: BAR 0: no parent found for of device [0x800b800-0x800b8ff]
[ 0.186163] pci 0000:02:05.0: BAR 0: can't allocate resource
[ 0.196014] Bluetooth: Core ver 2.15
[ 0.196041] NET: Registered protocol family 31
[ 0.196041] Bluetooth: HCI device and connection manager initialized
[ 0.196041] Bluetooth: HCI socket layer initialized
[ 0.196041] NetLabel: Initializing
[ 0.196041] NetLabel: domain hash size = 128
[ 0.196041] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.196053] NetLabel: unlabeled traffic allowed by default
[ 0.196176] hpet clockevent registered
[ 0.196180] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.196187] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.196194] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212016] pnp: PnP ACPI init
[ 0.212053] ACPI: bus type pnp registered
[ 0.215704] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215710] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215714] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215718] pnp 00:08: io resource (0x62-0x63) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215722] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215726] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215730] pnp 00:08: io resource (0x80-0x80) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215734] pnp 00:08: io resource (0x84-0x86) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215738] pnp 00:08: io resource (0x88-0x88) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215741] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215745] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215749] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.215753] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:02:05.0 BAR 0 (0x0-0xff), disabling
[ 0.218524] pnp: PnP ACPI: found 14 devices
[ 0.218528] ACPI: ACPI bus type pnp unregistered
[ 0.218534] PnPBIOS: Disabled by ACPI PNP
[ 0.218555] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.218559] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.218563] system 00:08: ioport range 0x480-0x4bf has been reserved
[ 0.218568] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.218572] system 00:08: iomem range 0xff380000-0xffefffff has been reserved
[ 0.218581] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.218585] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.218594] system 00:0c: ioport range 0x680-0x6ff has been reserved
[ 0.218598] system 00:0c: ioport range 0x295-0x296 has been reserved
[ 0.218606] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.218610] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved
[ 0.218614] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.218618] system 00:0d: iomem range 0x100000-0x4fffffff could not be reserved
[ 0.218622] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.253353] AppArmor: AppArmor Filesystem Enabled
[ 0.253392] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.253396] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.253402] pci 0000:00:01.0: MEM window: 0xff000000-0xff0fffff
[ 0.253408] pci 0000:00:01.0: PREFETCH window: 0xd7f00000-0xf7efffff
[ 0.253417] pci 0000:02:05.0: BAR 0: error updating (0x00b001 != 0x800b001)
[ 0.253421] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.253425] pci 0000:00:1e.0: IO window: 0xb000-0xbfff
[ 0.253431] pci 0000:00:1e.0: MEM window: 0xff100000-0xff1fffff
[ 0.253436] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.253454] pci 0000:00:1e.0: setting latency timer to 64
[ 0.253461] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.253465] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.253468] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.253472] pci_bus 0000:01: resource 1 mem: [0xff000000-0xff0fffff]
[ 0.253475] pci_bus 0000:01: resource 2 pref mem [0xd7f00000-0xf7efffff]
[ 0.253479] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.253482] pci_bus 0000:02: resource 1 mem: [0xff100000-0xff1fffff]
[ 0.253485] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.253488] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.253544] NET: Registered protocol family 2
[ 0.253699] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.254260] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.255166] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.255828] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.255832] TCP reno registered
[ 0.256090] NET: Registered protocol family 1
[ 0.256206] Trying to unpack rootfs image as initramfs...
[ 0.499854] Freeing initrd memory: 7469k freed
[ 0.510609] cpufreq-nforce2: No nForce2 chipset.
[ 0.510651] Scanning for low memory corruption every 60 seconds
[ 0.510813] audit: initializing netlink socket (disabled)
[ 0.510844] type=2000 audit(1262877733.508:1): initialized
[ 0.519935] highmem bounce pool size: 64 pages
[ 0.519944] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.521864] VFS: Disk quotas dquot_6.5.2
[ 0.521947] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.522703] fuse init (API version 7.12)
[ 0.522816] msgmni has been set to 1725
[ 0.523133] alg: No test for stdrng (krng)
[ 0.523156] io scheduler noop registered
[ 0.523160] io scheduler anticipatory registered
[ 0.523162] io scheduler deadline registered
[ 0.523222] io scheduler cfq registered (default)
[ 0.523331] pci 0000:01:00.0: Boot video device
[ 0.523459] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.523493] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.523674] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.523680] ACPI: Power Button [PWRF]
[ 0.523759] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.523763] ACPI: Power Button [PWRB]
[ 0.524286] processor LNXCPU:00: registered as cooling_device0
[ 0.524292] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.524459] processor LNXCPU:01: registered as cooling_device1
[ 0.527497] isapnp: Scanning for PnP cards...
[ 0.697038] Switched to high resolution mode on CPU 1
[ 0.700011] Switched to high resolution mode on CPU 0
[ 0.881240] isapnp: No Plug & Play device found
[ 0.882799] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.882920] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.883016] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.883464] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.884875] brd: module loaded
[ 0.885490] loop: module loaded
[ 0.885603] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.885749] ata_piix 0000:00:1f.1: version 2.13
[ 0.885772] alloc irq_desc for 18 on node -1
[ 0.885775] alloc kstat_irqs on node -1
[ 0.885786] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.885854] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.885968] scsi0 : ata_piix
[ 0.886110] scsi1 : ata_piix
[ 0.888199] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.888203] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.889393] Fixed MDIO Bus: probed
[ 0.889444] PPP generic driver version 2.4.2
[ 0.889576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.889603] alloc irq_desc for 23 on node -1
[ 0.889607] alloc kstat_irqs on node -1
[ 0.889615] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.889635] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.889640] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.889706] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.893631] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.893640] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 0.893657] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff27fc00
[ 0.908513] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.908622] usb usb1: configuration #1 chosen from 1 choice
[ 0.908664] hub 1-0:1.0: USB hub found
[ 0.908681] hub 1-0:1.0: 8 ports detected
[ 0.908774] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.908802] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.908842] alloc irq_desc for 16 on node -1
[ 0.908845] alloc kstat_irqs on node -1
[ 0.908852] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.908861] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.908866] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.908908] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.908942] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000e000
[ 0.909044] usb usb2: configuration #1 chosen from 1 choice
[ 0.909081] hub 2-0:1.0: USB hub found
[ 0.909092] hub 2-0:1.0: 2 ports detected
[ 0.909169] alloc irq_desc for 19 on node -1
[ 0.909172] alloc kstat_irqs on node -1
[ 0.909179] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.909189] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.909193] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.909236] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.909267] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e400
[ 0.909366] usb usb3: configuration #1 chosen from 1 choice
[ 0.909404] hub 3-0:1.0: USB hub found
[ 0.909415] hub 3-0:1.0: 2 ports detected
[ 0.909479] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.909487] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.909492] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.909532] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.909563] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 0.909669] usb usb4: configuration #1 chosen from 1 choice
[ 0.909708] hub 4-0:1.0: USB hub found
[ 0.909718] hub 4-0:1.0: 2 ports detected
[ 0.909776] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.909784] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.909788] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.909828] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.909852] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 0.909957] usb usb5: configuration #1 chosen from 1 choice
[ 0.910001] hub 5-0:1.0: USB hub found
[ 0.910012] hub 5-0:1.0: 2 ports detected
[ 0.910142] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.910146] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.910644] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.910732] mice: PS/2 mouse device common for all mice
[ 0.910856] rtc_cmos 00:02: RTC can wake from S4
[ 0.910903] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.910929] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.911079] device-mapper: uevent: version 1.0.3
[ 0.911247] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.911370] device-mapper: multipath: version 1.1.0 loaded
[ 0.911376] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.911538] EISA: Probing bus 0 at eisa.0
[ 0.911577] EISA: Detected 0 cards.
[ 0.911713] cpuidle: using governor ladder
[ 0.911718] cpuidle: using governor menu
[ 0.912443] TCP cubic registered
[ 0.912624] NET: Registered protocol family 10
[ 0.913292] lo: Disabled Privacy Extensions
[ 0.913779] NET: Registered protocol family 17
[ 0.913807] Bluetooth: L2CAP ver 2.13
[ 0.913810] Bluetooth: L2CAP socket layer initialized
[ 0.913813] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.913816] Bluetooth: SCO socket layer initialized
[ 0.913867] Bluetooth: RFCOMM TTY layer initialized
[ 0.913874] Bluetooth: RFCOMM socket layer initialized
[ 0.913878] Bluetooth: RFCOMM ver 1.11
[ 0.913928] Using IPI No-Shortcut mode
[ 0.914015] PM: Resume from disk failed.
[ 0.914045] registered taskstats version 1
[ 0.914180] Magic number: 10:905:385
[ 0.914188] usb usb3: hash matches
[ 0.914219] thermal cooling_device0: hash matches
[ 0.914274] rtc_cmos 00:02: setting system clock to 2010-01-07 15:22:14 UTC (1262877734)
[ 0.914279] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.914282] EDD information not available.
[ 0.937469] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.060302] ata2.00: ATAPI: _NEC DVD_RW ND-3500AG, 2.18, max UDMA/33
[ 1.076202] ata2.00: configured for UDMA/33
[ 1.116269] ata1.00: HPA unlocked: 156299375 -> 156301488, native 156301488
[ 1.116275] ata1.00: ATA-6: ST380011A, 3.06, max UDMA/100
[ 1.116279] ata1.00: 156301488 sectors, multi 16: LBA48
[ 1.132361] ata1.00: configured for UDMA/100
[ 1.132520] scsi 0:0:0:0: Direct-Access ATA ST380011A 3.06 PQ: 0 ANSI: 5
[ 1.132724] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.132761] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.132905] sd 0:0:0:0: [sda] Write Protect is off
[ 1.132910] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.132946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.133161] sda:
[ 1.133689] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-3500AG 2.18 PQ: 0 ANSI: 5
[ 1.135740] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.135745] Uniform CD-ROM driver Revision: 3.20
[ 1.135855] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.135914] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.146173] sda1 sda2 < sda5 sda6 sda7 >
[ 1.176162] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.176187] Freeing unused kernel memory: 540k freed
[ 1.176896] Write protecting the kernel text: 4568k
[ 1.176953] Write protecting the kernel read-only data: 1836k
[ 1.342744] Linux agpgart interface v0.103
[ 1.376954] agpgart-intel 0000:00:00.0: Intel 865 Chipset
[ 1.381023] agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 1.528822] Floppy drive(s): fd0 is 1.44M
[ 1.537621] [drm] Initialized drm 1.1.0 20060810
[ 1.555190] FDC 0 is a post-1991 82077
[ 1.571368] [drm] radeon default to kernel modesetting DISABLED.
[ 1.571714] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.572545] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 1.744030] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1.929956] usb 2-1: configuration #1 chosen from 1 choice
[ 2.180020] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 2.383169] usb 3-2: configuration #1 chosen from 1 choice
[ 2.420096] usbcore: registered new interface driver hiddev
[ 2.435502] input: Microsoft Microsoft IntelliMouse® Optical as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 2.435657] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse® Optical] on usb-0000:00:1d.1-2/input0
[ 2.435690] usbcore: registered new interface driver usbhid
[ 2.435696] usbhid: v2.6:USB HID core driver
[ 2.640513] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 3.080741] PM: Starting manual resume from disk
[ 3.080747] PM: Resume from partition 8:5
[ 3.080749] PM: Checking hibernation image.
[ 3.080943] PM: Resume from disk failed.
[ 3.108286] kjournald starting. Commit interval 5 seconds
[ 3.108301] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.573226] usb 4-1: configuration #1 chosen from 1 choice
[ 3.816029] usb 4-2: new full speed USB device using uhci_hcd and address 3
[ 3.819972] type=1505 audit(1262877737.401:2): operation="profile_load" pid=401 name=/usr/share/gdm/guest-session/Xsession
[ 3.840107] type=1505 audit(1262877737.425:3): operation="profile_load" pid=402 name=/sbin/dhclient3
[ 3.840850] type=1505 audit(1262877737.425:4): operation="profile_load" pid=402 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.841253] type=1505 audit(1262877737.425:5): operation="profile_load" pid=402 name=/usr/lib/connman/scripts/dhclient-script
[ 3.880185] type=1505 audit(1262877737.465:6): operation="profile_load" pid=403 name=/usr/bin/evince
[ 3.892091] type=1505 audit(1262877737.477:7): operation="profile_load" pid=403 name=/usr/bin/evince-previewer
[ 3.899027] type=1505 audit(1262877737.481:8): operation="profile_load" pid=403 name=/usr/bin/evince-thumbnailer
[ 3.919820] type=1505 audit(1262877737.501:9): operation="profile_load" pid=405 name=/usr/lib/cups/backend/cups-pdf
[ 3.920699] type=1505 audit(1262877737.505:10): operation="profile_load" pid=405 name=/usr/sbin/cupsd
[ 4.013152] usb 4-2: configuration #1 chosen from 1 choice
[ 4.885063] Adding 1052216k swap on /dev/sda5. Priority:-1 extents:1 across:1052216k
[ 5.306675] EXT3 FS on sda6, internal journal
[ 5.338946] udev: starting version 147
[ 10.048304] __ratelimit: 3 callbacks suppressed
[ 10.048309] type=1505 audit(1262870543.630:12): operation="profile_replace" pid=780 name=/usr/share/gdm/guest-session/Xsession
[ 10.051007] type=1505 audit(1262870543.634:13): operation="profile_replace" pid=781 name=/sbin/dhclient3
[ 10.051749] type=1505 audit(1262870543.634:14): operation="profile_replace" pid=781 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.052181] type=1505 audit(1262870543.634:15): operation="profile_replace" pid=781 name=/usr/lib/connman/scripts/dhclient-script
[ 10.059511] type=1505 audit(1262870543.642:16): operation="profile_replace" pid=782 name=/usr/bin/evince
[ 10.071408] type=1505 audit(1262870543.654:17): operation="profile_replace" pid=782 name=/usr/bin/evince-previewer
[ 10.078541] type=1505 audit(1262870543.662:18): operation="profile_replace" pid=782 name=/usr/bin/evince-thumbnailer
[ 10.090152] type=1505 audit(1262870543.674:19): operation="profile_replace" pid=784 name=/usr/lib/cups/backend/cups-pdf
[ 10.091038] type=1505 audit(1262870543.674:20): operation="profile_replace" pid=784 name=/usr/sbin/cupsd
[ 10.094746] type=1505 audit(1262870543.678:21): operation="profile_replace" pid=785 name=/usr/sbin/tcpdump
[ 12.813169] NET: Registered protocol family 8
[ 12.813176] NET: Registered protocol family 20
[ 12.817007] intel_rng: FWH not detected
[ 12.844796] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x6204
[ 12.844857] usbcore: registered new interface driver usblp
[ 12.850907] parport_pc 00:07: reported by Plug and Play ACPI
[ 12.851028] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 12.868094] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.875944] lp: driver loaded but no devices found
[ 12.940267] lp0: using parport0 (interrupt-driven).
[ 13.111237] ppdev: user-space parallel port driver
[ 14.030145] [ueagle-atm] driver ueagle 1.4 loaded
[ 14.030229] usb 4-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9041) Rev (0X30A9): Eagle IV
[ 14.141955] usb 4-1: reset full speed USB device using uhci_hcd and address 2
[ 14.300987] usb 4-1: [ueagle-atm] using iso mode
[ 14.301703] usb 4-1: [ueagle-atm] (re)booting started
[ 14.303036] usbcore: registered new interface driver ueagle-atm
[ 14.745237] usb 2-1: usbfs: interface 0 claimed by usblp while 'usb' sets config #1
[ 15.428027] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 15.541323] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 16.436586] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.054805] CPU0 attaching NULL sched-domain.
[ 18.054815] CPU1 attaching NULL sched-domain.
[ 18.068076] CPU0 attaching sched-domain:
[ 18.068082] domain 0: span 0-1 level SIBLING
[ 18.068086] groups: 0 1
[ 18.068092] domain 1: span 0-1 level MC
[ 18.068096] groups: 0-1 (__cpu_power = 2048)
[ 18.068104] CPU1 attaching sched-domain:
[ 18.068106] domain 0: span 0-1 level SIBLING
[ 18.068110] groups: 1 0
[ 18.068115] domain 1: span 0-1 level MC
[ 18.068118] groups: 0-1 (__cpu_power = 2048)
[ 18.247977] usbcore: registered new interface driver snd-usb-audio
[ 18.600891] alloc irq_desc for 17 on node -1
[ 18.600898] alloc kstat_irqs on node -1
[ 18.600914] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 18.600995] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 18.924022] intel8x0_measure_ac97_clock: measured 55595 usecs (2679 samples)
[ 18.924029] intel8x0: clocking to 48000
[ 19.428030] usb 4-1: [ueagle-atm] (re)booting started
[ 20.552026] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 20.557030] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 21.572280] agpgart-intel 0000:00:00.0: AGP 3.0 bridge
[ 21.572301] agpgart-intel 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 21.572312] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 21.572356] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 21.827265] [drm] Setting GART location based on new memory map
[ 21.827275] [drm] Loading R200 Microcode
[ 21.827317] [drm] writeback test succeeded in 1 usecs
[ 23.932630] CPU0 attaching NULL sched-domain.
[ 23.932638] CPU1 attaching NULL sched-domain.
[ 23.948636] CPU0 attaching sched-domain:
[ 23.948645] domain 0: span 0-1 level SIBLING
[ 23.948651] groups: 0 1
[ 23.948663] CPU1 attaching sched-domain:
[ 23.948668] domain 0: span 0-1 level SIBLING
[ 23.948674] groups: 1 0
[ 24.556519] usb 4-1: [ueagle-atm] (re)booting started
[ 25.684041] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 25.689272] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 29.684892] usb 4-1: [ueagle-atm] (re)booting started
[ 30.816033] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 30.821197] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 34.820560] usb 4-1: [ueagle-atm] (re)booting started
[ 35.944347] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 35.959530] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 36.959101] glxinfo:1710 freeing invalid memtype f8102000-f8112000
[ 36.959115] glxinfo:1710 freeing invalid memtype f8112000-f8122000
[ 36.959127] glxinfo:1710 freeing invalid memtype f8122000-f8132000
[ 36.959138] glxinfo:1710 freeing invalid memtype f8132000-f8142000
[ 36.959149] glxinfo:1710 freeing invalid memtype f8142000-f8152000
[ 36.959159] glxinfo:1710 freeing invalid memtype f8152000-f8162000
[ 36.959170] glxinfo:1710 freeing invalid memtype f8162000-f8172000
[ 36.959181] glxinfo:1710 freeing invalid memtype f8172000-f8182000
[ 36.959192] glxinfo:1710 freeing invalid memtype f8182000-f8192000
[ 36.959202] glxinfo:1710 freeing invalid memtype f8192000-f81a2000
[ 36.959213] glxinfo:1710 freeing invalid memtype f81a2000-f81b2000
[ 36.959224] glxinfo:1710 freeing invalid memtype f81b2000-f81c2000
[ 36.959235] glxinfo:1710 freeing invalid memtype f81c2000-f81d2000
[ 36.959246] glxinfo:1710 freeing invalid memtype f81d2000-f81e2000
[ 36.959256] glxinfo:1710 freeing invalid memtype f81e2000-f81f2000
[ 36.959267] glxinfo:1710 freeing invalid memtype f81f2000-f8202000
[ 36.959278] glxinfo:1710 freeing invalid memtype f8202000-f8212000
[ 36.959289] glxinfo:1710 freeing invalid memtype f8212000-f8222000
[ 36.959300] glxinfo:1710 freeing invalid memtype f8222000-f8232000
[ 36.959310] glxinfo:1710 freeing invalid memtype f8232000-f8242000
[ 36.959321] glxinfo:1710 freeing invalid memtype f8242000-f8252000
[ 36.959332] glxinfo:1710 freeing invalid memtype f8252000-f8262000
[ 36.959343] glxinfo:1710 freeing invalid memtype f8262000-f8272000
[ 36.959353] glxinfo:1710 freeing invalid memtype f8272000-f8282000
[ 36.959364] glxinfo:1710 freeing invalid memtype f8282000-f8292000
[ 36.959375] glxinfo:1710 freeing invalid memtype f8292000-f82a2000
[ 36.959386] glxinfo:1710 freeing invalid memtype f82a2000-f82b2000
[ 36.959396] glxinfo:1710 freeing invalid memtype f82b2000-f82c2000
[ 36.959423] glxinfo:1710 freeing invalid memtype f82c2000-f82d2000
[ 36.959433] glxinfo:1710 freeing invalid memtype f82d2000-f82e2000
[ 36.959444] glxinfo:1710 freeing invalid memtype f82e2000-f82f2000
[ 36.959454] glxinfo:1710 freeing invalid memtype f82f2000-f8302000
[ 39.948176] usb 4-1: [ueagle-atm] (re)booting started
[ 41.092296] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 41.111677] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 45.112047] usb 4-1: [ueagle-atm] (re)booting started
[ 46.268031] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 46.273049] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 50.268021] usb 4-1: [ueagle-atm] (re)booting started
[ 51.392031] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 51.396907] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 55.392331] usb 4-1: [ueagle-atm] (re)booting started
[ 56.516025] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 56.520952] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 60.516021] usb 4-1: [ueagle-atm] (re)booting started
[ 61.644033] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 61.667477] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 65.644022] usb 4-1: [ueagle-atm] (re)booting started
[ 66.768024] usb 4-1: firmware: requesting ueagle-atm/DSP4i.bin
[ 66.773037] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2
[ 70.768019] usb 4-1: [ueagle-atm] (re)booting started


και ο θεός βοηθός!
Tsili32
babeTUX
babeTUX
 
Δημοσιεύσεις: 14
Εγγραφή: 04 Ιαν 2010, 17:00
Εκτύπωση

Re: Σύνδεση με Sagem Fast 840 του Connex

Δημοσίευσηαπό logari81 » 08 Ιαν 2010, 02:00

Tsili32 έγραψε:[ 61.667477] usb 4-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSP4i.bin failed with error -2

ωραια φαινεται να το βρήκαμε το πρόβλημα, δώσε μου το αποτελεσμα των εντολών

Κώδικας: Επιλογή όλων
ls /lib/firmware
ls /lib/firmware/ueagle-atm
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Επόμενο

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet

cron