Συντονιστής: adem1
Το θεμα σου μεταφερθηκε στην κατηγορια : Λειτουργικό Σύστημα
Tasos19s έγραψε:Συγνωμη αλλα γραφω οτι ειμαι αρχαριος τι ειναι ολα αυτα που μου λετε να διαβασω?
Με τα πολλα καταφερα να κανω τον grub και τωρα φορτωνει το Ubuntu ομως δεν μπορω να ανοιξω τα Windows.
Με απλα λογια δεν γινεται να με βοηθησει κανεις?
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub.
sda1: _________________________________________________________________________
File system: ext4
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sda1 and
looks at sector 126093119 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #1 for
/boot/grub/menu.lst.
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD /boot/grub/core.img
sda3: _________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
sda4: _________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: _________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ _____________________________________________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x0e24ae19
Partition Boot Start End Size Id System
/dev/sda1 63 265,650,839 265,650,777 83 Linux
/dev/sda2 * 265,652,224 265,857,023 204,800 7 HPFS/NTFS
/dev/sda3 265,857,024 306,616,319 40,759,296 7 HPFS/NTFS
/dev/sda4 306,616,590 312,576,704 5,960,115 5 Extended
/dev/sda5 306,616,653 312,576,704 5,960,052 82 Linux swap / Solaris
blkid -c /dev/null: ____________________________________________________________
/dev/sda1: UUID="448ff2f7-c250-4e05-ae1f-f2ab586b8368" TYPE="ext4"
/dev/sda2: UUID="30B6A09DB6A06556" LABEL="System Reserved" TYPE="ntfs"
/dev/sda3: UUID="AE28A81028A7D59D" TYPE="ntfs"
/dev/sda5: UUID="8cca870c-95cf-4034-9673-2d732c0c25cb" TYPE="swap"
=============================== "mount" output: ===============================
/dev/sda1 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/tasos/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=tasos)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-16-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro quiet splash
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-16-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro single
initrd /boot/initrd.img-2.6.31-16-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro quiet splash
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-15-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-15-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro single
initrd /boot/initrd.img-2.6.31-15-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 448ff2f7-c250-4e05-ae1f-f2ab586b8368
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda1 during installation
UUID=448ff2f7-c250-4e05-ae1f-f2ab586b8368 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=8cca870c-95cf-4034-9673-2d732c0c25cb none swap sw 0 0
=================== sda1: Location of files loaded by Grub: ===================
.0GB: boot/grub/grub.cfg
.0GB: boot/grub/stage2
.0GB: boot/initrd.img-2.6.31-14-generic
.0GB: boot/initrd.img-2.6.31-15-generic
.0GB: boot/initrd.img-2.6.31-16-generic
.0GB: boot/vmlinuz-2.6.31-14-generic
.0GB: boot/vmlinuz-2.6.31-15-generic
.0GB: boot/vmlinuz-2.6.31-16-generic
.0GB: initrd.img
.0GB: initrd.img.old
.0GB: vmlinuz
.0GB: vmlinuz.old
sudo grub-install /dev/sda1
sudo update-grub
tasos@Spanos:~$ sudo grub-install /dev/sda1
[sudo] password for tasos:
grub-setup: warn: Attempting to install GRUB to a partition instead of the MBR. This is a BAD idea.
grub-setup: warn: Embedding is not possible. GRUB can only be installed in this setup by using blocklists. However, blocklists are UNRELIABLE and its use is discouraged.
Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd0) /dev/sda
(hd1) /dev/sdb
tasos@Spanos:~$ sudo update-grub
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.31-16-generic
Found initrd image: /boot/initrd.img-2.6.31-16-generic
Found linux image: /boot/vmlinuz-2.6.31-15-generic
Found initrd image: /boot/initrd.img-2.6.31-15-generic
Found linux image: /boot/vmlinuz-2.6.31-14-generic
Found initrd image: /boot/initrd.img-2.6.31-14-generic
Found memtest86+ image: /boot/memtest86+.bin
ls: cannot access /var/lib/os-prober/mount/boot
Boot: No such file or directory
done