Δημοσιεύτηκε: 16 Ιούλ 2014, 00:35
Λοιπόν, τελικά βρήκα χρόνο και υπομονή σήμερα το μεσημέρι και το έκανα. 
Αν και περίμενα να βρω την απίστευτη σκόνη δεν ήταν έτσι. Πάντως τώρα βλέπω αποτελέσματα στην ταχύτητα του υπολογιστή. Δε φυσάει βέβαια αλλά καμία σχέση με πριν που κολλούσε τρελά.
Θεωρώ οτι έπαιξε μεγάλο ρόλο αυτή η πάστα γιατί η προηγούμενη σε ένα απο τα δυο σημεία που έβαλα μάλλον είχε μείνει πολύ λίγη.
Ορίστε και οι μετρήσεις μετά απο 4 ώρες λειτουργίας του πιτσιού.
sudo hddtemp /dev/sda Αυτήν την εντολή μου λέει δεν τη βρίσκει. Πάντως οι θερμοκρασίες έπεσαν μόνο 4 βαθμούς. Οι οποίοι κάνουν τόσο μεγάλη διαφορά στις επιδόσεις?
Επίσης αν υπάρχει περίπτωση να βοηθήσει κανέναν έχω τραβήξει και κάτι φωτογραφίες με τον υπολογιστή ανοιχτό να καθίσω να βρω πως γίνεται να της ανεβάσω.
Τέλος, μπορεί να είναι ιδέα μου αλλά νομίζω οτι μετά το καθάρισμα δεν έχει τόσο έντονα χρώματα η οθόνη...
Αν και περίμενα να βρω την απίστευτη σκόνη δεν ήταν έτσι. Πάντως τώρα βλέπω αποτελέσματα στην ταχύτητα του υπολογιστή. Δε φυσάει βέβαια αλλά καμία σχέση με πριν που κολλούσε τρελά.
Θεωρώ οτι έπαιξε μεγάλο ρόλο αυτή η πάστα γιατί η προηγούμενη σε ένα απο τα δυο σημεία που έβαλα μάλλον είχε μείνει πολύ λίγη.
Ορίστε και οι μετρήσεις μετά απο 4 ώρες λειτουργίας του πιτσιού.
- Κώδικας: Επιλογή όλων
nickaraxnos@nickaraxnos-laptop:~$ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +69.0°C (crit = +97.0°C)
nouveau-pci-0100
Adapter: PCI adapter
temp1: +76.0°C (high = +100.0°C, crit = +110.0°C)
- Κώδικας: Επιλογή όλων
nickaraxnos@nickaraxnos-laptop:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-65-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD1600BEVT-22ZCT0
Serial Number: WD-WXH208314782
LU WWN Device Id: 5 0014ee 201135f13
Firmware Version: 11.01A11
User Capacity: 160,041,885,696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Wed Jul 16 00:29:02 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 159 158 021 Pre-fail Always - 1016
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3419
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002f 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 8024
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3393
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 338
193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 16985
194 Temperature_Celsius 0x0022 084 076 000 Old_age Always - 59
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 183 000 Old_age Always - 2
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 237 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 237 occurred at disk power-on lifetime: 7946 hours (331 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ae da 04 40 Error: UNC at LBA = 0x0004daae = 318126
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 10 ac da 04 01 08 00:13:26.187 READ FPDMA QUEUED
60 01 08 ad da 04 01 08 00:13:26.187 READ FPDMA QUEUED
60 01 00 ae da 04 01 08 00:13:26.187 READ FPDMA QUEUED
ef 10 02 00 00 00 00 08 00:13:26.187 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 08 00:13:26.187 READ NATIVE MAX ADDRESS EXT
Error 236 occurred at disk power-on lifetime: 7946 hours (331 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ab da 04 40 Error: UNC at LBA = 0x0004daab = 318123
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 20 ae da 04 01 08 00:13:23.150 READ FPDMA QUEUED
60 01 18 ad da 04 01 08 00:13:23.127 READ FPDMA QUEUED
60 01 10 ac da 04 01 08 00:13:23.127 READ FPDMA QUEUED
60 01 08 ab da 04 01 08 00:13:23.127 READ FPDMA QUEUED
60 01 00 a8 da 04 01 08 00:13:23.127 READ FPDMA QUEUED
Error 235 occurred at disk power-on lifetime: 7946 hours (331 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 aa da 04 40 Error: UNC at LBA = 0x0004daaa = 318122
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 30 a8 da 04 01 08 00:13:19.824 READ FPDMA QUEUED
60 01 28 a9 da 04 01 08 00:13:19.801 READ FPDMA QUEUED
60 01 20 aa da 04 01 08 00:13:19.801 READ FPDMA QUEUED
60 01 18 ab da 04 01 08 00:13:19.801 READ FPDMA QUEUED
60 01 10 ac da 04 01 08 00:13:19.801 READ FPDMA QUEUED
Error 234 occurred at disk power-on lifetime: 7946 hours (331 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a7 da 04 40 Error: UNC at LBA = 0x0004daa7 = 318119
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 01 38 ae da 04 01 08 00:13:16.762 READ FPDMA QUEUED
60 01 30 ad da 04 01 08 00:13:16.762 READ FPDMA QUEUED
60 01 28 ac da 04 01 08 00:13:16.762 READ FPDMA QUEUED
60 01 20 ab da 04 01 08 00:13:16.762 READ FPDMA QUEUED
60 01 18 aa da 04 01 08 00:13:16.761 READ FPDMA QUEUED
Error 233 occurred at disk power-on lifetime: 7946 hours (331 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a7 da 04 40 Error: UNC at LBA = 0x0004daa7 = 318119
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 a8 00 b7 d9 04 01 08 00:13:13.710 READ FPDMA QUEUED
60 58 10 5f da 04 01 08 00:13:13.710 READ FPDMA QUEUED
60 80 08 37 d9 04 01 08 00:13:13.709 READ FPDMA QUEUED
60 40 00 f7 d8 04 01 08 00:13:13.709 READ FPDMA QUEUED
60 20 00 d7 d8 04 01 08 00:13:13.709 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay
sudo hddtemp /dev/sda Αυτήν την εντολή μου λέει δεν τη βρίσκει. Πάντως οι θερμοκρασίες έπεσαν μόνο 4 βαθμούς. Οι οποίοι κάνουν τόσο μεγάλη διαφορά στις επιδόσεις?
Επίσης αν υπάρχει περίπτωση να βοηθήσει κανέναν έχω τραβήξει και κάτι φωτογραφίες με τον υπολογιστή ανοιχτό να καθίσω να βρω πως γίνεται να της ανεβάσω.
Τέλος, μπορεί να είναι ιδέα μου αλλά νομίζω οτι μετά το καθάρισμα δεν έχει τόσο έντονα χρώματα η οθόνη...