Δημοσιεύτηκε: 06 Ιαν 2015, 00:14
από George Pantelis
Επειδή ζητήθηκε παραπάνω, να και ο δίσκος. Τί λέτε;
Κώδικας: Επιλογή όλων
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.8.0-29-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION === Device Model: ST500LM012 HN-M500MBB Serial Number: S2R7J9BDB00875 LU WWN Device Id: 5 0004cf 20b9f1682 Firmware Version: 2AR10002 User Capacity: 500.107.862.016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Jan 5 23:08:09 2015 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled

=== START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 6360) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 106) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported.

SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 1 2 Throughput_Performance 0x0026 056 056 000 Old_age Always - 5795 3 Spin_Up_Time 0x0023 091 090 025 Pre-fail Always - 2859 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 433 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 587 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 13 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 434 191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 057 032 000 Old_age Always - 43 (Min/Max 11/68) 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 358 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 13 225 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 18728

SMART Error Log Version: 1 No Errors Logged

SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 90% 582 - # 2 Extended offline Completed without error 00% 338 - # 3 Short offline Completed without error 00% 337 - # 4 Short offline Aborted by host 30% 334 - # 5 Short offline Aborted by host 90% 334 - # 6 Extended offline Aborted by host 90% 319 - # 7 Short offline Completed without error 00% 319 - # 8 Extended offline Aborted by host 80% 318 - # 9 Short offline Completed without error 00% 318 - #10 Extended offline Aborted by host 90% 317 - #11 Short offline Completed without error 00% 317 -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Interrupted [90% left] (0-65535) 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

klearhos@klearhos-Compaq-Presario-CQ60-Notebook-PC:~$