Δημοσιεύτηκε: 09 Μαρ 2017, 22:57
the_eye έγραψε:Δώσε μας και το αποτέλεσμα της εντολής dmesg στο τερματικό.
- Κώδικας: Επιλογή όλων
es: 519485
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-41-generic root=UUID=e79866ed-b118-4146-80f2-14b032d423e0 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] microcode: microcode updated early to revision 0x218, date = 2009-04-10
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007f700)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 2010600K/2086860K available (8250K kernel code, 845K rwdata, 3332K rodata, 988K init, 852K bss, 76260K reserved, 0K cma-reserved, 1173852K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xdac27000 - 0xdad1e000 ( 988 kB)
.data : 0xda80eed7 - 0xdac25680 (4185 kB)
.text : 0xda000000 - 0xda80eed7 (8251 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f603e000 soft=f6080000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 2097152 bytes of page_ext
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1662.372 MHz processor
[ 0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.74 BogoMIPS (lpj=6649488)
[ 0.004031] pid_max: default: 32768 minimum: 301
[ 0.004096] ACPI: Core revision 20160422
[ 0.022242] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.022333] Security Framework initialized
[ 0.022337] Yama: becoming mindful.
[ 0.022376] AppArmor: AppArmor initialized
[ 0.022490] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.022494] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.023141] Disabled fast string operations
[ 0.023147] CPU: Physical Processor ID: 0
[ 0.023149] CPU: Processor Core ID: 0
[ 0.023157] mce: CPU supports 5 MCE banks
[ 0.023170] CPU0: Thermal monitoring enabled (TM2)
[ 0.023179] process: using mwait in idle threads
[ 0.023192] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.023195] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.024030] Freeing SMP alternatives memory: 32K (dad1e000 - dad26000)
[ 0.028022] ftrace: allocating 32597 entries in 64 pages
[ 0.048203] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.048206] smpboot: Max logical packages: 2
[ 0.048211] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.092000] smpboot: CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[ 0.092000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.092000] ... version: 3
[ 0.092000] ... bit width: 40
[ 0.092000] ... generic registers: 2
[ 0.092000] ... value mask: 000000ffffffffff
[ 0.092000] ... max period: 000000007fffffff
[ 0.092000] ... fixed-purpose events: 3
[ 0.092000] ... event mask: 0000000700000003
[ 0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.092000] CPU 1 irqstacks, hard=f639e000 soft=f63a0000
[ 0.092000] x86: Booting SMP configuration:
[ 0.092000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.092132] x86: Booted up 1 node, 2 CPUs
[ 0.092132] smpboot: Total of 2 processors activated (6649.48 BogoMIPS)
[ 0.092889] devtmpfs: initialized
[ 0.093013] evm: security.selinux
[ 0.093016] evm: security.SMACK64
[ 0.093017] evm: security.SMACK64EXEC
[ 0.093019] evm: security.SMACK64TRANSMUTE
[ 0.093020] evm: security.SMACK64MMAP
[ 0.093022] evm: security.ima
[ 0.093023] evm: security.capability
[ 0.093092] PM: Registering ACPI NVS region [mem 0x7f66d000-0x7f6befff] (335872 bytes)
[ 0.093092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.093092] pinctrl core: initialized pinctrl subsystem
[ 0.093092] RTC time: 19:50:53, date: 03/09/17
[ 0.093128] NET: Registered protocol family 16
[ 0.096123] EISA bus registered
[ 0.108015] cpuidle: using governor ladder
[ 0.120015] cpuidle: using governor menu
[ 0.120018] PCCT header not found.
[ 0.120158] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.120160] Simple Boot Flag at 0x44 set to 0x1
[ 0.120190] ACPI: bus type PCI registered
[ 0.120195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.120408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.120413] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.120415] PCI: Using MMCONFIG for extended config space
[ 0.120417] PCI: Using configuration type 1 for base access
[ 0.136116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.136350] ACPI: Added _OSI(Module Device)
[ 0.136354] ACPI: Added _OSI(Processor Device)
[ 0.136356] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.136359] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.136787] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.142160] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.145932] ACPI: Dynamic OEM Table Load:
[ 0.145948] ACPI: SSDT 0x00000000F63A3400 0001F7 (v02 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.147046] ACPI: Dynamic OEM Table Load:
[ 0.147059] ACPI: SSDT 0x00000000F63A2E00 0001C7 (v02 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.148519] ACPI: Dynamic OEM Table Load:
[ 0.148531] ACPI: SSDT 0x00000000F60D9F00 0000D0 (v02 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.149543] ACPI: Dynamic OEM Table Load:
[ 0.149555] ACPI: SSDT 0x00000000F60A7480 000083 (v02 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.151076] ACPI : EC: EC started
[ 0.151372] ACPI: Interpreter enabled
[ 0.151428] ACPI: (supports S0 S3 S4 S5)
[ 0.151431] ACPI: Using IOAPIC for interrupt routing
[ 0.151515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.321607] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.324930] ACPI: Power Resource [FN00] (on)
[ 0.327097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.327111] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.327269] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160422/dsfield-211)
[ 0.327282] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node f6091588), AE_ALREADY_EXISTS (20160422/psparse-542)
[ 0.327309] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[ 0.328651] PCI host bridge to bus 0000:00
[ 0.328658] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.328663] pci_bus 0000:00: root bus resource [io 0x0d00-0xefff window]
[ 0.328668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.328672] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[ 0.328677] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.328697] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[ 0.328994] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[ 0.329011] pci 0000:00:02.0: reg 0x10: [mem 0x96280000-0x962fffff]
[ 0.329020] pci 0000:00:02.0: reg 0x14: [io 0x50f0-0x50f7]
[ 0.329029] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[ 0.329038] pci 0000:00:02.0: reg 0x1c: [mem 0x96300000-0x9633ffff]
[ 0.329324] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[ 0.329339] pci 0000:00:02.1: reg 0x10: [mem 0x96200000-0x9627ffff]
[ 0.329663] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[ 0.329696] pci 0000:00:1b.0: reg 0x10: [mem 0x96340000-0x96343fff 64bit]
[ 0.329826] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.329965] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.330136] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[ 0.330272] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.330406] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.330575] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[ 0.330702] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.330835] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.331005] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[ 0.331140] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.331273] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.331439] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[ 0.331502] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf]
[ 0.331718] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.331883] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[ 0.331947] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f]
[ 0.332177] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.332343] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[ 0.332407] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f]
[ 0.332615] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.332787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[ 0.332850] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f]
[ 0.333060] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.333247] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[ 0.333274] pci 0000:00:1d.7: reg 0x10: [mem 0x96344400-0x963447ff]
[ 0.333393] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.333566] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.333727] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.334058] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[ 0.334188] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.334198] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 0.334206] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[ 0.334212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.334495] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[ 0.334517] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.334532] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.334546] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.334561] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.334576] pci 0000:00:1f.1: reg 0x20: [io 0x50c0-0x50cf]
[ 0.334605] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.334609] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.334612] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.334616] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.334872] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[ 0.334899] pci 0000:00:1f.2: reg 0x10: [io 0x50d8-0x50df]
[ 0.334914] pci 0000:00:1f.2: reg 0x14: [io 0x50fc-0x50ff]
[ 0.334928] pci 0000:00:1f.2: reg 0x18: [io 0x50d0-0x50d7]
[ 0.334943] pci 0000:00:1f.2: reg 0x1c: [io 0x50f8-0x50fb]
[ 0.334958] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x502f]
[ 0.334972] pci 0000:00:1f.2: reg 0x24: [mem 0x96344000-0x963443ff]
[ 0.335041] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.335324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[ 0.335405] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.335936] acpiphp: Slot [1] registered
[ 0.336081] pci 0000:01:00.0: [14e4:4315] type 00 class 0x028000
[ 0.336127] pci 0000:01:00.0: reg 0x10: [mem 0x95100000-0x95103fff 64bit]
[ 0.336334] pci 0000:01:00.0: supports D1 D2
[ 0.336338] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.348082] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.348091] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.348098] pci 0000:00:1c.0: bridge window [mem 0x95100000-0x961fffff]
[ 0.348109] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.348271] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.348279] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.348287] pci 0000:00:1c.1: bridge window [mem 0x94100000-0x950fffff]
[ 0.348297] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.348486] pci 0000:03:00.0: [1969:1026] type 00 class 0x020000
[ 0.348529] pci 0000:03:00.0: reg 0x10: [mem 0x93000000-0x9303ffff 64bit]
[ 0.348549] pci 0000:03:00.0: reg 0x18: [io 0x1000-0x107f]
[ 0.348716] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.348936] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.348953] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.348960] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.348968] pci 0000:00:1c.2: bridge window [mem 0x93000000-0x940fffff]
[ 0.348978] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.349152] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.349170] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.349174] pci 0000:00:1e.0: bridge window [io 0x0d00-0xefff window] (subtractive decode)
[ 0.349179] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.349183] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[ 0.349221] pci_bus 0000:00: on NUMA node 0
[ 0.428411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.428613] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.428819] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.429017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.429212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.429409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.429605] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.429802] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.431663] ACPI: Enabled 3 GPEs in block 00 to 1F
[ 0.431829] ACPI : EC: EC stopped
[ 0.431935] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.431938] ACPI : EC: EC started
[ 0.433324] SCSI subsystem initialized
[ 0.433481] libata version 3.00 loaded.
[ 0.433570] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.433570] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.433570] vgaarb: loaded
[ 0.433570] vgaarb: bridge control possible 0000:00:02.0
[ 0.433570] ACPI: bus type USB registered
[ 0.433570] usbcore: registered new interface driver usbfs
[ 0.433570] usbcore: registered new interface driver hub
[ 0.433570] usbcore: registered new device driver usb
[ 0.433570] PCI: Using ACPI for IRQ routing
[ 0.445272] PCI: pci_cache_line_size set to 64 bytes
[ 0.445440] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.445445] e820: reserve RAM buffer [mem 0x7f576000-0x7fffffff]
[ 0.445450] e820: reserve RAM buffer [mem 0x7f66d000-0x7fffffff]
[ 0.445453] e820: reserve RAM buffer [mem 0x7f6ef000-0x7fffffff]
[ 0.445456] e820: reserve RAM buffer [mem 0x7f700000-0x7fffffff]
[ 0.445883] NetLabel: Initializing
[ 0.445886] NetLabel: domain hash size = 128
[ 0.445887] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.445922] NetLabel: unlabeled traffic allowed by default
[ 0.446014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.446014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.446014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.448067] clocksource: Switched to clocksource hpet
[ 0.474635] VFS: Disk quotas dquot_6.6.0
[ 0.474682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.474975] AppArmor: AppArmor Filesystem Enabled
[ 0.475168] pnp: PnP ACPI init
[ 0.552470] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io 0x1000-0x2fff]
[ 0.552648] system 00:00: [io 0x0200-0x020f] has been reserved
[ 0.552656] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.552661] system 00:00: [io 0x0610] has been reserved
[ 0.552666] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.552671] system 00:00: [io 0x0400-0x047f] has been reserved
[ 0.552677] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.552682] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 0.552689] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.552694] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.552700] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.552705] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.552710] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.552716] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.552721] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.552731] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.552890] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.553136] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.553385] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[ 0.553652] pnp: PnP ACPI: found 4 devices
[ 0.553658] PnPBIOS: Disabled by ACPI PNP
[ 0.597043] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.597126] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.597133] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.597143] pci 0000:00:1c.0: bridge window [mem 0x95100000-0x961fffff]
[ 0.597151] pci 0000:00:1c.0: bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.597162] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.597167] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]
[ 0.597176] pci 0000:00:1c.1: bridge window [mem 0x94100000-0x950fffff]
[ 0.597183] pci 0000:00:1c.1: bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.597194] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 0.597199] pci 0000:00:1c.2: bridge window [io 0x1000-0x2fff]
[ 0.597208] pci 0000:00:1c.2: bridge window [mem 0x93000000-0x940fffff]
[ 0.597215] pci 0000:00:1c.2: bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.597226] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.597247] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.597251] pci_bus 0000:00: resource 5 [io 0x0d00-0xefff window]
[ 0.597256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.597260] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.597265] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]
[ 0.597269] pci_bus 0000:01: resource 1 [mem 0x95100000-0x961fffff]
[ 0.597274] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[ 0.597278] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.597282] pci_bus 0000:02: resource 1 [mem 0x94100000-0x950fffff]
[ 0.597287] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[ 0.597291] pci_bus 0000:03: resource 0 [io 0x1000-0x2fff]
[ 0.597296] pci_bus 0000:03: resource 1 [mem 0x93000000-0x940fffff]
[ 0.597300] pci_bus 0000:03: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
[ 0.597305] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
[ 0.597309] pci_bus 0000:04: resource 5 [io 0x0d00-0xefff window]
[ 0.597313] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.597318] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff window]
[ 0.597404] NET: Registered protocol family 2
[ 0.597885] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.597929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.597983] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.598032] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.598048] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.598161] NET: Registered protocol family 1
[ 0.598208] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.600774] PCI: CLS 0 bytes, default 64
[ 0.600934] Trying to unpack rootfs image as initramfs...
[ 2.385671] Freeing initrd memory: 39384K (f3304000 - f597a000)
[ 2.386115] Scanning for low memory corruption every 60 seconds
[ 2.387209] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 2.387266] audit: initializing netlink subsys (disabled)
[ 2.387316] audit: type=2000 audit(1489089055.384:1): initialized
[ 2.388305] Initialise system trusted keyrings
[ 2.388554] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 2.396227] zbud: loaded
[ 2.397655] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.398498] fuse init (API version 7.25)
[ 2.399076] Allocating IMA blacklist keyring.
[ 2.402489] Key type asymmetric registered
[ 2.402495] Asymmetric key parser 'x509' registered
[ 2.402540] bounce: pool size: 64 pages
[ 2.402705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 2.402795] io scheduler noop registered
[ 2.402799] io scheduler deadline registered (default)
[ 2.403057] io scheduler cfq registered
[ 2.404058] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[ 2.405023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.405048] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.405190] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 2.405192] vesafb: scrolling: redraw
[ 2.405196] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.405234] vesafb: framebuffer at 0x80000000, mapped to 0xf8600000, using 1920k, total 1920k
[ 2.405591] Console: switching to colour frame buffer device 100x37
[ 2.405626] fb0: VESA VGA frame buffer device
[ 2.405686] intel_idle: MWAIT substates: 0x20220
[ 2.405689] intel_idle: v0.4.1 model 0x1C
[ 2.405705] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 2.405971] intel_idle: lapic_timer_reliable_states 0x2
[ 2.484383] ACPI: AC Adapter [AC] (off-line)
[ 2.484636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.484643] ACPI: Power Button [PWRB]
[ 2.484820] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.484873] ACPI: Lid Switch [LID0]
[ 2.485039] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 2.485045] ACPI: Sleep Button [SLPB]
[ 2.485237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.485243] ACPI: Power Button [PWRF]
[ 2.486645] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.486649] ACPI: Thermal Zone [THRM] (27 C)
[ 2.486759] GHES: HEST is not enabled!
[ 2.486970] isapnp: Scanning for PnP cards...
[ 2.487222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.797543] isapnp: No Plug & Play device found
[ 3.124624] random: fast init done
[ 3.284140] ACPI: Battery Slot [BAT0] (battery present)
[ 3.284632] Linux agpgart interface v0.103
[ 3.302304] brd: module loaded
[ 3.307819] loop: module loaded
[ 3.308449] ata_piix 0000:00:1f.1: version 2.13
[ 3.310773] scsi host0: ata_piix
[ 3.311143] scsi host1: ata_piix
[ 3.311335] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[ 3.311338] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[ 3.311690] libphy: Fixed MDIO Bus: probed
[ 3.311694] tun: Universal TUN/TAP device driver, 1.6
[ 3.311695] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 3.311880] PPP generic driver version 2.4.2
[ 3.311976] ata2: port disabled--ignoring
[ 3.312190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.312215] ehci-pci: EHCI PCI platform driver
[ 3.312574] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.312594] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.312617] ehci-pci 0000:00:1d.7: debug port 1
[ 3.316562] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.316602] ehci-pci 0000:00:1d.7: irq 16, io mem 0x96344400
[ 3.332131] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.332383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.332388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.332392] usb usb1: Product: EHCI Host Controller
[ 3.332395] usb usb1: Manufacturer: Linux 4.8.0-41-generic ehci_hcd
[ 3.332399] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.332893] hub 1-0:1.0: USB hub found
[ 3.332922] hub 1-0:1.0: 8 ports detected
[ 3.333665] ehci-platform: EHCI generic platform driver
[ 3.333719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.333732] ohci-pci: OHCI PCI platform driver
[ 3.333776] ohci-platform: OHCI generic platform driver
[ 3.333807] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.334138] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.334156] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.334170] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.334206] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[ 3.334388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.334393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.334397] usb usb2: Product: UHCI Host Controller
[ 3.334401] usb usb2: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[ 3.334404] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.334876] hub 2-0:1.0: USB hub found
[ 3.334898] hub 2-0:1.0: 2 ports detected
[ 3.335529] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.335547] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.335560] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.335615] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[ 3.335793] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.335798] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.335802] usb usb3: Product: UHCI Host Controller
[ 3.335805] usb usb3: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[ 3.335809] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.336325] hub 3-0:1.0: USB hub found
[ 3.336347] hub 3-0:1.0: 2 ports detected
[ 3.336984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.337001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.337014] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.337077] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[ 3.337257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.337262] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.337266] usb usb4: Product: UHCI Host Controller
[ 3.337270] usb usb4: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[ 3.337273] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.337735] hub 4-0:1.0: USB hub found
[ 3.337758] hub 4-0:1.0: 2 ports detected
[ 3.338403] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.338421] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.338434] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 3.338494] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[ 3.338668] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.338672] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.338676] usb usb5: Product: UHCI Host Controller
[ 3.338680] usb usb5: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[ 3.338683] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.339147] hub 5-0:1.0: USB hub found
[ 3.339169] hub 5-0:1.0: 2 ports detected
[ 3.339741] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 3.381564] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.381581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.382185] mousedev: PS/2 mouse device common for all mice
[ 3.384371] rtc_cmos 00:01: RTC can wake from S4
[ 3.384680] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 3.384729] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 3.384755] i2c /dev entries driver
[ 3.384977] device-mapper: uevent: version 1.0.3
[ 3.385266] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 3.385360] platform eisa.0: Probing EISA bus 0
[ 3.385366] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 3.385372] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 3.385377] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 3.385381] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 3.385386] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 3.385391] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 3.385395] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 3.385400] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 3.385405] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 3.385408] platform eisa.0: EISA: Detected 0 cards
[ 3.385422] cpufreq_nforce2: No nForce2 chipset
[ 3.385474] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.386263] NET: Registered protocol family 10
[ 3.386990] NET: Registered protocol family 17
[ 3.387013] Key type dns_resolver registered
[ 3.387724] microcode: sig=0x106c2, pf=0x4, revision=0x218
[ 3.387890] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.387900] Using IPI No-Shortcut mode
[ 3.388177] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f64d7ca83, max_idle_ns: 440795287011 ns
[ 3.388503] registered taskstats version 1
[ 3.388515] Loading compiled-in X.509 certificates
[ 3.405209] Loaded X.509 cert 'Build time autogenerated kernel key: 27f4df0ee522f0f22f04ae9768d4ac3a476d412a'
[ 3.405275] zswap: loaded using pool lzo/zbud
[ 3.417960] Key type big_key registered
[ 3.422983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.424633] Key type trusted registered
[ 3.430974] Key type encrypted registered
[ 3.430984] AppArmor: AppArmor sha1 policy hashing enabled
[ 3.430989] ima: No TPM chip found, activating TPM-bypass!
[ 3.431040] evm: HMAC attrs: 0x1
[ 3.431752] Magic number: 9:460:849
[ 3.431805] index1: hash matches
[ 3.431808] index1: hash matches
[ 3.431851] graphics fbcon: hash matches
[ 3.431969] rtc_cmos 00:01: setting system clock to 2017-03-09 19:50:56 UTC (1489089056)
[ 3.433712] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.433715] EDD information not available.
[ 3.433979] PM: Hibernation image not present or could not be loaded.
[ 3.469066] Freeing unused kernel memory: 988K (dac27000 - dad1e000)
[ 3.469179] Write protecting the kernel text: 8252k
[ 3.469412] Write protecting the kernel read-only data: 3340k
[ 3.469415] NX-protecting the kernel data: 6084k
[ 3.469892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 3.660126] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 3.739095] wmi: Mapper loaded
[ 3.746404] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 3.746670] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 3.747223] acpi device:18: registered as cooling_device3
[ 3.747631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 3.810365] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.912671] [drm] Initialized drm 1.1.0 20060810
[ 3.990480] usb 1-2: New USB device found, idVendor=04f2, idProduct=b084
[ 3.990488] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 3.990494] usb 1-2: Product: Webcam
[ 3.990499] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[ 4.238414] ahci 0000:00:1f.2: version 3.0
[ 4.238958] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.239047] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 4.239056] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[ 4.260600] scsi host2: ahci
[ 4.274683] scsi host3: ahci
[ 4.276640] scsi host4: ahci
[ 4.277322] scsi host5: ahci
[ 4.277733] ata3: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344100 irq 27
[ 4.277739] ata4: DUMMY
[ 4.277745] ata5: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344200 irq 27
[ 4.277749] ata6: DUMMY
[ 4.283086] pci 0000:00:00.0: Intel 945GME Chipset
[ 4.283143] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 4.283229] pci 0000:00:00.0: detected 8192K stolen memory
[ 4.283332] [drm] Memory usable by graphics device = 256M
[ 4.283342] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[ 4.283346] fb: switching to inteldrmfb from VESA VGA
[ 4.283438] Console: switching to colour dummy device 80x25
[ 4.283772] [drm] Replacing VGA console driver
[ 4.283816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.283819] [drm] Driver supports precise vblank timestamp query.
[ 4.286811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.366580] ATL1E 0000:03:00.0 enp3s0: renamed from eth0
[ 4.536076] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 4.591848] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.593202] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4.679539] ata3.00: ATA-8: WDC WD3200LPVT-00G33T0, 01.01A01, max UDMA/133
[ 4.679545] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 4.681061] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 4.681267] ata3.00: configured for UDMA/133
[ 4.681669] scsi 2:0:0:0: Direct-Access ATA WDC WD3200LPVT-0 1A01 PQ: 0 ANSI: 5
[ 4.713461] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 4.713469] sd 2:0:0:0: [sda] 4096-byte physical blocks
[ 4.713576] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.714409] sd 2:0:0:0: [sda] Write Protect is off
[ 4.714418] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.714522] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.729251] [drm] RC6 disabled, disabling runtime PM support
[ 4.729316] [drm] initialized overlay support
[ 4.731341] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[ 4.732188] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
[ 4.732196] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.732202] usb 3-1: Product: USB Receiver
[ 4.732208] usb 3-1: Manufacturer: Logitech
[ 4.770914] sda: sda1 sda2 < sda5 >
[ 4.773549] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.774244] sd 2:0:0:0: [sda] Attached SCSI disk
[ 4.807331] usbcore: registered new interface driver usbhid
[ 4.807335] usbhid: USB HID core driver
[ 4.812635] ------------[ cut here ]------------
[ 4.812791] WARNING: CPU: 0 PID: 6 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/i915/intel_fbdev.c:416 intel_fb_initial_config+0x366/0x680 [i915]
[ 4.812794] WARN_ON(!connector->state->crtc)
[ 4.812797] Modules linked in:
[ 4.812800] usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[ 4.812839] CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 4.8.0-41-generic #44-Ubuntu
[ 4.812842] Hardware name: Acer Aspire one /Aspire one , BIOS V1.05 02/20/2009
[ 4.812853] Workqueue: events_unbound async_run_entry_fn
[ 4.812858] dab58967 95caf702 00000286 f634bd10 da3db775 f634bd54 f8a79528 f634bd40
[ 4.812873] da0720ea f8a858a3 f634bd74 00000006 f8a79528 000001a0 f8a22236 000001a0
[ 4.812887] 00000001 00000000 f5623c00 f634bd60 da072156 00000009 00000000 f634bd54
[ 4.812900] Call Trace:
[ 4.812912] [<da3db775>] dump_stack+0x58/0x73
[ 4.812920] [<da0720ea>] __warn+0xea/0x110
[ 4.813056] [<f8a22236>] ? intel_fb_initial_config+0x366/0x680 [i915]
[ 4.813063] [<da072156>] warn_slowpath_fmt+0x46/0x60
[ 4.813199] [<f8a22236>] intel_fb_initial_config+0x366/0x680 [i915]
[ 4.813207] [<da04baff>] ? native_smp_send_reschedule+0x1f/0x40
[ 4.813213] [<da099038>] ? resched_curr+0x68/0xc0
[ 4.813349] [<f8a21ed0>] ? intelfb_create+0x540/0x540 [i915]
[ 4.813382] [<f85d1623>] drm_setup_crtcs+0x1c3/0xa40 [drm_kms_helper]
[ 4.813389] [<da099e2f>] ? ttwu_do_activate+0x5f/0x70
[ 4.813395] [<da09a804>] ? try_to_wake_up+0x44/0x350
[ 4.813405] [<da80a64e>] ? __mutex_unlock_slowpath+0x5e/0x80
[ 4.813437] [<f85d218c>] drm_fb_helper_initial_config+0xbc/0x420 [drm_kms_helper]
[ 4.813444] [<da099cd7>] ? ttwu_do_wakeup+0x17/0x110
[ 4.813581] [<f8a22b96>] intel_fbdev_initial_config+0x16/0x30 [i915]
[ 4.813588] [<da092655>] async_run_entry_fn+0x35/0x180
[ 4.813596] [<da08a978>] process_one_work+0x1b8/0x420
[ 4.813603] [<da08ac17>] worker_thread+0x37/0x4b0
[ 4.813609] [<da08abe0>] ? process_one_work+0x420/0x420
[ 4.813615] [<da090006>] kthread+0xa6/0xc0
[ 4.813623] [<da80c922>] ret_from_kernel_thread+0xe/0x24
[ 4.813629] [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[ 4.813634] ---[ end trace 5fb9e68c124792d7 ]---
[ 4.821100] fbcon: inteldrmfb (fb0) is primary device
[ 4.821383] Console: switching to colour frame buffer device 128x37
[ 4.821448] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.830773] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C52F.0001/input/input8
[ 4.832405] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[ 4.840578] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:046D:C52F.0002/input/input9
[ 4.848660] ------------[ cut here ]------------
[ 4.848782] WARNING: CPU: 1 PID: 36 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/i915/intel_fbdev.c:416 intel_fb_initial_config+0x366/0x680 [i915]
[ 4.848784] WARN_ON(!connector->state->crtc)
[ 4.848786] Modules linked in:
[ 4.848789] hid_generic(+) usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[ 4.848820] CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G W 4.8.0-41-generic #44-Ubuntu
[ 4.848823] Hardware name: Acer Aspire one /Aspire one , BIOS V1.05 02/20/2009
[ 4.848847] Workqueue: events output_poll_execute [drm_kms_helper]
[ 4.848851] dab58967 503fe760 00000286 f2cc1d30 da3db775 f2cc1d74 f8a79528 f2cc1d60
[ 4.848862] da0720ea f8a858a3 f2cc1d94 00000024 f8a79528 000001a0 f8a22236 000001a0
[ 4.848872] 00000001 00000000 f5623c00 f2cc1d80 da072156 00000009 00000000 f2cc1d74
[ 4.848882] Call Trace:
[ 4.848893] [<da3db775>] dump_stack+0x58/0x73
[ 4.848900] [<da0720ea>] __warn+0xea/0x110
[ 4.849004] [<f8a22236>] ? intel_fb_initial_config+0x366/0x680 [i915]
[ 4.849009] [<da072156>] warn_slowpath_fmt+0x46/0x60
[ 4.849112] [<f8a22236>] intel_fb_initial_config+0x366/0x680 [i915]
[ 4.849216] [<f8a21ed0>] ? intelfb_create+0x540/0x540 [i915]
[ 4.849241] [<f85d1623>] drm_setup_crtcs+0x1c3/0xa40 [drm_kms_helper]
[ 4.849289] [<f84fab6a>] ? drm_mode_connector_update_edid_property+0x4a/0x70 [drm]
[ 4.849297] [<da80a457>] ? __ww_mutex_lock+0x17/0xa0
[ 4.849343] [<f8509f99>] ? drm_modeset_lock+0x59/0xf0 [drm]
[ 4.849389] [<f850a0d4>] ? drm_modeset_lock_all_ctx+0xa4/0xb0 [drm]
[ 4.849414] [<f85d1fbd>] drm_fb_helper_hotplug_event+0x11d/0x160 [drm_kms_helper]
[ 4.849518] [<f8a22cf1>] intel_fbdev_output_poll_changed+0x21/0x30 [i915]
[ 4.849540] [<f85c3771>] drm_kms_helper_hotplug_event+0x21/0x30 [drm_kms_helper]
[ 4.849562] [<f85c3968>] output_poll_execute+0x188/0x1c0 [drm_kms_helper]
[ 4.849569] [<da08a978>] process_one_work+0x1b8/0x420
[ 4.849574] [<da08ac17>] worker_thread+0x37/0x4b0
[ 4.849579] [<da08abe0>] ? process_one_work+0x420/0x420
[ 4.849583] [<da090006>] kthread+0xa6/0xc0
[ 4.849589] [<da80c922>] ret_from_kernel_thread+0xe/0x24
[ 4.849594] [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[ 4.849597] ---[ end trace 5fb9e68c124792d8 ]---
[ 4.850069] ------------[ cut here ]------------
[ 4.850099] WARNING: CPU: 1 PID: 36 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/drm_atomic_helper.c:785 drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[ 4.850101] Modules linked in: hid_generic(+) usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[ 4.850133] CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G W 4.8.0-41-generic #44-Ubuntu
[ 4.850135] Hardware name: Acer Aspire one /Aspire one , BIOS V1.05 02/20/2009
[ 4.850157] Workqueue: events output_poll_execute [drm_kms_helper]
[ 4.850161] dab58967 503fe760 00000286 f2cc1cb8 da3db775 00000000 f85d542c f2cc1ce8
[ 4.850171] da0720ea daa43fb4 00000001 00000024 f85d542c 00000311 f85ca9ba 00000311
[ 4.850180] f5623c00 00000000 f545f800 f2cc1cfc da0721fa 00000009 00000000 00000000
[ 4.850190] Call Trace:
[ 4.850199] [<da3db775>] dump_stack+0x58/0x73
[ 4.850205] [<da0720ea>] __warn+0xea/0x110
[ 4.850228] [<f85ca9ba>] ? drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[ 4.850233] [<da0721fa>] warn_slowpath_null+0x2a/0x30
[ 4.850256] [<f85ca9ba>] drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[ 4.850366] [<f8a06115>] ? intel_pre_plane_update+0x55/0x160 [i915]
[ 4.850469] [<f8a0700d>] intel_atomic_commit_tail+0x93d/0xf50 [i915]
[ 4.850493] [<f85cb1a8>] ? drm_atomic_helper_swap_state+0x1b8/0x2d0 [drm_kms_helper]
[ 4.850596] [<f8a07a2e>] intel_atomic_commit+0x40e/0x510 [i915]
[ 4.850647] [<f850ac2b>] ? drm_atomic_check_only+0x19b/0x660 [drm]
[ 4.850694] [<f850b122>] drm_atomic_commit+0x32/0x60 [drm]
[ 4.850719] [<f85d0373>] restore_fbdev_mode+0x153/0x2a0 [drm_kms_helper]
[ 4.850765] [<f850a0d4>] ? drm_modeset_lock_all_ctx+0xa4/0xb0 [drm]
[ 4.850789] [<f85d2027>] drm_fb_helper_restore_fbdev_mode_unlocked+0x27/0x70 [drm_kms_helper]
[ 4.850813] [<f85d209d>] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
[ 4.850836] [<f85d1fcc>] drm_fb_helper_hotplug_event+0x12c/0x160 [drm_kms_helper]
[ 4.850941] [<f8a22cf1>] intel_fbdev_output_poll_changed+0x21/0x30 [i915]
[ 4.850963] [<f85c3771>] drm_kms_helper_hotplug_event+0x21/0x30 [drm_kms_helper]
[ 4.850984] [<f85c3968>] output_poll_execute+0x188/0x1c0 [drm_kms_helper]
[ 4.850991] [<da08a978>] process_one_work+0x1b8/0x420
[ 4.850996] [<da08ac17>] worker_thread+0x37/0x4b0
[ 4.851001] [<da08abe0>] ? process_one_work+0x420/0x420
[ 4.851005] [<da090006>] kthread+0xa6/0xc0
[ 4.851011] [<da80c922>] ret_from_kernel_thread+0xe/0x24
[ 4.851016] [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[ 4.851020] ---[ end trace 5fb9e68c124792d9 ]---
[ 4.902346] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[ 5.032544] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.619548] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[ 5.811554] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000/0x0, board id: 0, fw id: 516037
[ 5.933696] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 9.852999] random: crng init done
[ 14.709323] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.962946] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.171881] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 16.172432] systemd[1]: Detected architecture x86.
[ 16.190935] systemd[1]: Set hostname to <roula>.
[ 17.811517] systemd[1]: Reached target Encrypted Volumes.
[ 17.812090] systemd[1]: Listening on udev Control Socket.
[ 17.812344] systemd[1]: Listening on Journal Socket.
[ 17.812430] systemd[1]: Reached target User and Group Name Lookups.
[ 17.812560] systemd[1]: Listening on udev Kernel Socket.
[ 17.812688] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 17.812750] systemd[1]: Reached target Remote File Systems.
[ 18.602703] lp: driver loaded but no devices found
[ 18.640637] ppdev: user-space parallel port driver
[ 22.196194] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.406367] systemd-journald[246]: Received request to flush runtime journal from PID 1
[ 24.151708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.589402] intel_rng: FWH not detected
[ 24.718962] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160422/utaddress-255)
[ 24.718983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.718989] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20160422/utaddress-255)
[ 24.719003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.719006] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20160422/utaddress-255)
[ 24.719020] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 24.719022] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 24.874979] leds_ss4200: no LED devices found
[ 24.891649] audit: type=1400 audit(1489089077.952:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[ 24.891679] audit: type=1400 audit(1489089077.952:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[ 24.891705] audit: type=1400 audit(1489089077.952:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=411 comm="apparmor_parser"
[ 24.891732] audit: type=1400 audit(1489089077.952:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[ 24.900262] audit: type=1400 audit(1489089077.964:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=410 comm="apparmor_parser"
[ 24.900298] audit: type=1400 audit(1489089077.964:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=410 comm="apparmor_parser"
[ 25.309081] intel_powerclamp: No package C-state available
[ 25.367371] audit: type=1400 audit(1489089078.428:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=427 comm="apparmor_parser"
[ 25.367408] audit: type=1400 audit(1489089078.428:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=427 comm="apparmor_parser"
[ 25.423454] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 25.423464] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 25.423471] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 25.423476] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 25.423481] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 25.423488] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 25.423494] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x12
[ 25.440468] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 25.441041] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 25.529809] media: Linux media interface: v0.10
[ 25.613946] wl: loading out-of-tree module taints kernel.
[ 25.613959] wl: module license 'MIXED/Proprietary' taints kernel.
[ 25.613961] Disabling lock debugging due to kernel taint
[ 25.647952] Linux video capture interface: v2.00
[ 25.659147] wl: module verification failed: signature and/or required key missing - tainting kernel
[ 25.900611] audit: type=1400 audit(1489089078.964:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=440 comm="apparmor_parser"
[ 25.900643] audit: type=1400 audit(1489089078.964:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
[ 25.911969] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[ 26.149630] uvcvideo: Found UVC 1.00 device Webcam (04f2:b084)
[ 26.153620] uvcvideo 1-2:1.0: Entity type for entity Extension 6 was not initialized!
[ 26.153636] uvcvideo 1-2:1.0: Entity type for entity Processing 5 was not initialized!
[ 26.153645] uvcvideo 1-2:1.0: Entity type for entity Selector 4 was not initialized!
[ 26.153654] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 26.154152] input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input12
[ 26.154497] usbcore: registered new interface driver uvcvideo
[ 26.154501] USB Video Class driver (1.1.1)
[ 29.441508] wl 0000:01:00.0 wls1: renamed from wlan0
[ 29.696600] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 29.860267] acer_wmi: Function bitmap for Communication Device: 0x1
[ 29.861771] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[ 31.141572] Adding 2085884k swap on /dev/sda5. Priority:-1 extents:1 across:2085884k FS
[ 36.599581] PM: Syncing filesystems ... done.
[ 37.490747] PM: Preparing system for sleep (mem)
[ 37.491003] Freezing user space processes ... (elapsed 0.045 seconds) done.
[ 37.536790] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[ 37.536848] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 37.538196] PM: Suspending system (mem)
[ 37.538292] Suspending console(s) (use no_console_suspend to debug)
[ 37.538810] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[ 37.649909] sd 2:0:0:0: [sda] Stopping disk
[ 38.215310] PM: suspend of devices complete after 676.719 msecs
[ 38.232251] PM: late suspend of devices complete after 16.922 msecs
[ 38.233314] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[ 38.233380] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[ 38.233453] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[ 38.233520] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[ 38.233589] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[ 38.252246] PM: noirq suspend of devices complete after 19.982 msecs
[ 38.252296] ACPI: Preparing to enter system sleep state S3
[ 38.252456] ACPI : EC: EC stopped
[ 38.252457] PM: Saving platform NVS memory
[ 38.253672] Disabling non-boot CPUs ...
[ 38.255327] smpboot: CPU 1 is now offline
[ 38.264539] ACPI: Low-level resume complete
[ 38.264539] ACPI : EC: EC started
[ 38.264539] PM: Restoring platform NVS memory
[ 38.273034] Enabling non-boot CPUs ...
[ 38.297037] x86: Booting SMP configuration:
[ 38.297042] smpboot: Booting Node 0 Processor 1 APIC 0x1
[ 38.255228] Initializing CPU#1
[ 38.255228] Disabled fast string operations
[ 38.297719] cache: parent cpu1 should not be sleeping
[ 38.298719] CPU1 is up
[ 38.299522] ACPI: Waking up from system sleep state S3
[ 38.303457] acpi LNXPOWER:00: Turning OFF
[ 38.304382] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[ 38.304531] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[ 38.304676] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[ 38.304820] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[ 38.324344] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 38.324852] PM: noirq resume of devices complete after 21.310 msecs
[ 38.325636] PM: early resume of devices complete after 0.714 msecs
[ 38.329488] usb usb2: root hub lost power or was reset
[ 38.329573] usb usb3: root hub lost power or was reset
[ 38.329646] usb usb4: root hub lost power or was reset
[ 38.329733] usb usb5: root hub lost power or was reset
[ 38.330061] ata2: port disabled--ignoring
[ 38.333592] sd 2:0:0:0: [sda] Starting disk
[ 38.488429] rtc_cmos 00:01: System wakeup disabled by ACPI
[ 38.584143] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 38.647475] ata5: SATA link down (SStatus 0 SControl 300)
[ 38.676204] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[ 39.008247] PM: resume of devices complete after 682.593 msecs
[ 39.008786] PM: Finishing wakeup.
[ 39.008791] Restarting tasks ... done.
[ 39.756297] video LNXVIDEO:00: Restoring backlight state
[ 39.836206] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[ 40.388109] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 40.500270] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 40.559902] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 40.560483] ata3.00: configured for UDMA/133
[ 42.804763] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 42.839890] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 42.876528] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[ 120.769934] ATL1E 0000:03:00.0 enp3s0: NIC Link is Up <100 Mbps Full Duplex>
[ 120.770010] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
roula@roula:~$