Δημοσιεύτηκε: 05 Μαρ 2012, 18:58
Ούτε εγώ γνωρίζω πολλά, αλλά μια αναζήτηση με google εμφάνισε αρκετά αποτελέσματα:
* http://electronics4everyone.blogspot.co ... ammer.html
* http://piklab.sourceforge.net/screenshots.php
* Ίσως το arduino να είναι καλύτερο, μιας και νομίζω πως δεν χρειάζεται programmer; http://arduino.cc/en/Guide/HomePage http://arduino.cc/en/Guide/Introduction
* http://electronics4everyone.blogspot.co ... ammer.html
* http://piklab.sourceforge.net/screenshots.php
* Ίσως το arduino να είναι καλύτερο, μιας και νομίζω πως δεν χρειάζεται programmer; http://arduino.cc/en/Guide/HomePage http://arduino.cc/en/Guide/Introduction
έγραψε:Programmer
For selecting a harware programmer when programming a board or chip and not using the onboard USB-serial connection. Normally you won't need this, but if you're burning a bootloader to a new microcontroller, you will use this.
Burn Bootloader
The items in this menu allow you to burn a bootloader onto the microcontroller on an Arduino board. This is not required for normal use of an Arduino board but is useful if you purchase a new ATmega microcontroller (which normally come without a bootloader). Ensure that you've selected the correct board from the Boards menu before burning the bootloader.