Δημοσιεύτηκε: 14 Ιαν 2009, 18:50
- Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:44:42 UTC 2008 (Ubuntu 2.6.24-23.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 131056
[ 0.000000] HighMem 131056 -> 131056
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 131056
[ 0.000000] On node 0 totalpages: 131056
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 991 pages used for memmap
[ 0.000000] Normal zone: 125969 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F79E0 checksum 0
[ 0.000000] ACPI: RSDP 000F79E0, 0014 (r0 VIA692)
[ 0.000000] ACPI: RSDT 1FFF3000, 0028 (r1 VIA692 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 1FFF3040, 0074 (r1 VIA692 AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 1FFF30C0, 226A (r1 VIA692 AWRDACPI 1000 MSFT 100000C)
[ 0.000000] ACPI: FACS 1FFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:dfff0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033
[ 0.000000] Kernel command line: root=UUID=2438a551-67bc-4b7f-9eec-5f72e4ae36d9 ro quiet splash
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffb000 (0140d000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 866.758 MHz processor.
[ 35.077145] Console: colour VGA+ 80x25
[ 35.077162] console [tty0] enabled
[ 35.077937] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 35.079593] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 35.153525] Memory: 507652k/524224k available (2178k kernel code, 15964k reserved, 1005k data, 368k init, 0k highmem)
[ 35.153548] virtual kernel memory layout:
[ 35.153551] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 35.153554] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 35.153558] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 35.153561] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 35.153564] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 35.153567] .data : 0xc0320918 - 0xc041bdc4 (1005 kB)
[ 35.153571] .text : 0xc0100000 - 0xc0320918 (2178 kB)
[ 35.153579] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 35.153672] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 35.233684] Calibrating delay using timer specific routine.. 1735.57 BogoMIPS (lpj=3471147)
[ 35.233750] Security Framework initialized
[ 35.233776] SELinux: Disabled at boot.
[ 35.233811] AppArmor: AppArmor initialized
[ 35.233822] Failure registering capabilities with primary security module.
[ 35.233845] Mount-cache hash table entries: 512
[ 35.234144] Initializing cgroup subsys ns
[ 35.234156] Initializing cgroup subsys cpuacct
[ 35.234180] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 35.234207] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 35.234213] CPU: L2 cache: 256K
[ 35.234223] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 00000000
[ 35.234244] Compat vDSO mapped to ffffe000.
[ 35.234284] Checking 'hlt' instruction... OK.
[ 35.250363] SMP alternatives: switching to UP code
[ 35.253805] Freeing SMP alternatives: 11k freed
[ 35.254218] Early unpacking initramfs... done
[ 36.164433] ACPI: Core revision 20070126
[ 36.164732] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 36.167239] ACPI: setting ELCR to 0200 (from 0e20)
[ 36.169241] CPU0: Intel Pentium III (Coppermine) stepping 06
[ 36.169262] SMP motherboard not detected.
[ 36.169270] Local APIC not detected. Using dummy APIC emulation.
[ 36.169473] Brought up 1 CPUs
[ 36.169545] CPU0 attaching sched-domain:
[ 36.169555] domain 0: span 01
[ 36.169560] groups: 01
[ 36.170318] net_namespace: 64 bytes
[ 36.170353] Booting paravirtualized kernel on bare hardware
[ 36.171794] Time: 17:39:01 Date: 01/14/09
[ 36.171918] NET: Registered protocol family 16
[ 36.172570] EISA bus registered
[ 36.172611] ACPI: bus type pci registered
[ 36.205543] PCI: PCI BIOS revision 2.10 entry at 0xfb370, last bus=1
[ 36.205553] PCI: Using configuration type 1
[ 36.205592] Setting up standard PCI resources
[ 36.209990] ACPI: EC: Look up EC in DSDT
[ 36.214754] ACPI: Interpreter enabled
[ 36.214765] ACPI: (supports S0 S1 S5)
[ 36.214794] ACPI: Using PIC for interrupt routing
[ 36.223842] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 36.224333] PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
[ 36.224341] PCI quirk: region 5000-500f claimed by vt82c686 SMB
[ 36.224912] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 36.258220] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 36.258545] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
[ 36.258872] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 36.259197] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 36.259514] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 36.259611] pnp: PnP ACPI init
[ 36.259642] ACPI: bus type pnp registered
[ 36.266330] pnp: PnP ACPI: found 13 devices
[ 36.266339] ACPI: ACPI bus type pnp unregistered
[ 36.266354] PnPBIOS: Disabled by ACPI PNP
[ 36.267049] PCI: Using ACPI for IRQ routing
[ 36.267060] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 36.301329] NET: Registered protocol family 8
[ 36.301337] NET: Registered protocol family 20
[ 36.301594] AppArmor: AppArmor Filesystem Enabled
[ 36.305296] Time: tsc clocksource has been installed.
[ 36.313435] system 00:00: iomem range 0xcd000-0xcffff has been reserved
[ 36.313445] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 36.313452] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 36.313459] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 36.313466] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[ 36.313475] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 36.313482] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 36.313490] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 36.313497] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 36.313522] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 36.344721] PCI: Bridge: 0000:00:01.0
[ 36.344730] IO window: c000-cfff
[ 36.344741] MEM window: e4000000-e5ffffff
[ 36.344748] PREFETCH window: d0000000-dfffffff
[ 36.344781] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 36.344831] NET: Registered protocol family 2
[ 36.381521] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 36.382163] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 36.382796] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 36.383752] TCP: Hash tables configured (established 16384 bind 16384)
[ 36.383765] TCP reno registered
[ 36.393987] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 37.088272] it is
[ 38.026108] Freeing initrd memory: 7321k freed
[ 38.028362] audit: initializing netlink socket (disabled)
[ 38.028435] audit(1231954741.876:1): initialized
[ 38.034913] VFS: Disk quotas dquot_6.5.1
[ 38.035238] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 38.035809] io scheduler noop registered
[ 38.035817] io scheduler anticipatory registered
[ 38.035823] io scheduler deadline registered
[ 38.035875] io scheduler cfq registered (default)
[ 38.035930] Applying VIA southbridge workaround.
[ 38.035941] PCI: VIA PCI bridge detected. Disabling DAC.
[ 38.035948] PCI: Disabling Via external APIC routing
[ 38.036001] Boot video device is 0000:01:00.0
[ 38.036965] isapnp: Scanning for PnP cards...
[ 38.391521] isapnp: No Plug & Play device found
[ 38.493643] Real Time Clock Driver v1.12ac
[ 38.493889] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 38.494148] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 38.494603] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 38.496176] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 38.497037] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 38.499313] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 38.499525] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 38.499855] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 38.500462] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 38.500478] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 38.512688] mice: PS/2 mouse device common for all mice
[ 38.513060] EISA: Probing bus 0 at eisa.0
[ 38.513096] Cannot allocate resource for EISA slot 4
[ 38.513102] Cannot allocate resource for EISA slot 5
[ 38.513107] Cannot allocate resource for EISA slot 6
[ 38.513123] EISA: Detected 0 cards.
[ 38.513132] cpuidle: using governor ladder
[ 38.513138] cpuidle: using governor menu
[ 38.513654] NET: Registered protocol family 1
[ 38.513759] Using IPI No-Shortcut mode
[ 38.513878] registered taskstats version 1
[ 38.514188] Magic number: 9:954:693
[ 38.514485] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 38.514491] EDD information not available.
[ 38.515356] Freeing unused kernel memory: 368k freed
[ 38.515519] Write protecting the kernel read-only data: 801k
[ 38.533206] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 40.286750] fuse init (API version 7.9)
[ 40.357652] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 40.357673] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 41.367894] usbcore: registered new interface driver usbfs
[ 41.367971] usbcore: registered new interface driver hub
[ 41.397861] SCSI subsystem initialized
[ 41.445615] usbcore: registered new device driver usb
[ 41.647329] USB Universal Host Controller Interface driver v3.0
[ 41.648543] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 41.648552] PCI: setting IRQ 10 as level-triggered
[ 41.648560] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 41.648594] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 41.649325] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 41.649377] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 41.649789] usb usb1: configuration #1 chosen from 1 choice
[ 41.649864] hub 1-0:1.0: USB hub found
[ 41.649882] hub 1-0:1.0: 2 ports detected
[ 41.699130] libata version 3.00 loaded.
[ 41.751535] ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 41.751578] uhci_hcd 0000:00:07.3: UHCI Host Controller
[ 41.751650] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[ 41.751696] uhci_hcd 0000:00:07.3: irq 10, io base 0x0000d800
[ 41.752019] usb usb2: configuration #1 chosen from 1 choice
[ 41.752088] hub 2-0:1.0: USB hub found
[ 41.752106] hub 2-0:1.0: 2 ports detected
[ 41.892602] pata_via 0000:00:07.1: version 0.3.3
[ 41.923459] scsi0 : pata_via
[ 41.955369] scsi1 : pata_via
[ 41.955578] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 41.955586] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 42.119492] ata1.00: ATA-6: WDC WD800JB-00FMA0, 13.03G13, max UDMA/100
[ 42.119509] ata1.00: 156301488 sectors, multi 16: LBA
[ 42.127427] ata1.00: configured for UDMA/100
[ 42.213152] 8139too Fast Ethernet driver 0.9.28
[ 42.505427] Floppy drive(s): fd0 is 1.44M
[ 42.522603] FDC 0 is a post-1991 82077
[ 42.612346] ata2.00: ATAPI: _NEC DVD_RW ND-1300A, 1.0C, max UDMA/33
[ 42.612407] ata2.01: ATAPI: MAD DOG MD-16XDVD9A2, 1.F3, max UDMA/33
[ 42.783201] ata2.00: configured for UDMA/33
[ 42.955175] ata2.01: configured for UDMA/33
[ 42.955631] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00FM 13.0 PQ: 0 ANSI: 5
[ 42.959331] scsi 1:0:0:0: CD-ROM _NEC DVD_RW ND-1300A 1.0C PQ: 0 ANSI: 5
[ 42.961183] scsi 1:0:1:0: CD-ROM MAD DOG MD-16XDVD9A2 1.F3 PQ: 0 ANSI: 5
[ 42.972725] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 42.972743] PCI: setting IRQ 5 as level-triggered
[ 42.972751] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 42.973680] eth0: RealTek RTL8139 at 0xe400, 00:50:fc:79:f9:ba, IRQ 5
[ 42.973688] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 42.989786] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 44.593376] Driver 'sd' needs updating - please use bus_type methods
[ 44.598130] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 44.598188] sd 0:0:0:0: [sda] Write Protect is off
[ 44.598196] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.598253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 44.598430] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 44.598460] sd 0:0:0:0: [sda] Write Protect is off
[ 44.598467] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 44.598517] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 44.598533] sda: sda1 sda2 sda3 sda4
[ 44.612766] Driver 'sr' needs updating - please use bus_type methods
[ 44.629987] sd 0:0:0:0: [sda] Attached SCSI disk
[ 44.649759] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 44.649824] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 44.649949] scsi 1:0:1:0: Attached scsi generic sg2 type 5
[ 44.651245] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 44.651257] Uniform CD-ROM driver Revision: 3.20
[ 44.651377] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 44.656091] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 44.656289] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 45.277504] Attempting manual resume
[ 45.277520] swsusp: Resume From Partition 8:2
[ 45.277525] PM: Checking swsusp image.
[ 45.278108] PM: Resume from disk failed.
[ 45.371033] kjournald starting. Commit interval 5 seconds
[ 45.371096] EXT3-fs: mounted filesystem with ordered data mode.
[ 55.809566] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 55.894311] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 56.137688] Linux agpgart interface v0.102
[ 56.143265] ath_hal: module license 'Proprietary' taints kernel.
[ 56.177376] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 56.362422] parport_pc: VIA 686A/8231 detected
[ 56.362436] parport_pc: probing current configuration
[ 56.362461] parport_pc: Current parallel port base: 0x378
[ 56.362519] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 56.441262] parport_pc: VIA parallel port: io=0x378, irq=7
[ 56.513738] agpgart: Detected VIA Apollo Pro 133 chipset
[ 56.518406] agpgart: AGP aperture is 64M @ 0xe0000000
[ 57.033605] wlan: 0.9.4
[ 57.420812] Linux video capture interface: v2.00
[ 58.064571] ath_pci: 0.9.4
[ 58.067158] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 58.067172] PCI: setting IRQ 11 as level-triggered
[ 58.067180] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 58.820294] bttv: driver version 0.9.17 loaded
[ 58.820312] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 59.232873] input: Power Button (FF) as /devices/virtual/input/input2
[ 59.244059] ACPI: Power Button (FF) [PWRF]
[ 59.244630] input: Power Button (CM) as /devices/virtual/input/input3
[ 59.259958] ACPI: Power Button (CM) [PWRB]
[ 59.260336] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 59.272042] ACPI: Sleep Button (CM) [SLPB]
[ 59.736354] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 64.322758] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 64.644461] ath_rate_sample: 1.2 (0.9.4)
[ 64.646445] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
[ 64.646462] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
[ 64.646483] wifi0: H/W encryption support: WEP AES AES_CCM TKIP
[ 64.646494] wifi0: mac 7.8 phy 4.5 radio 5.6
[ 64.646508] wifi0: Use hw queue 1 for WME_AC_BE traffic
[ 64.646513] wifi0: Use hw queue 0 for WME_AC_BK traffic
[ 64.646518] wifi0: Use hw queue 2 for WME_AC_VI traffic
[ 64.646523] wifi0: Use hw queue 3 for WME_AC_VO traffic
[ 64.646528] wifi0: Use hw queue 8 for CAB traffic
[ 64.646533] wifi0: Use hw queue 9 for beacons
[ 64.711531] wifi0: Atheros 5212: mem=0xe7020000, irq=11
[ 64.712016] bttv: Bt8xx card found (0).
[ 64.713016] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 64.713025] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 64.713050] bttv0: Bt878 (rev 17) at 0000:00:0e.0, irq: 11, latency: 32, mmio: 0xe7001000
[ 64.714222] bttv0: subsystem: 0070:13ea (UNKNOWN)
[ 64.714233] please mail id, board name and the correct card= insmod option to video4linux-list@redhat.com
[ 64.714244] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[ 64.714402] bttv0: gpio: en=ffffffff, out=ffffffff in=00000000 [init]
[ 64.743928] bttv0: detected by eeprom: Hauppauge (bt848) [card=2]
[ 64.771962] tveeprom 1-0050: Hauppauge model 44914, rev D147, serial# 5094527
[ 64.771971] tveeprom 1-0050: tuner model is LG TP18PSB01D (idx 47, type 28)
[ 64.771980] tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
[ 64.771987] tveeprom 1-0050: audio processor is None (idx 0)
[ 64.771994] tveeprom 1-0050: has radio
[ 64.771999] bttv0: Hauppauge eeprom indicates model#44914
[ 64.772006] bttv0: tuner type=28
[ 64.819671] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[ 64.820247] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[ 64.821368] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[ 65.073345] tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
[ 65.073448] tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[ 65.073457] tuner 1-0061: type set to LG PAL_BG+FM (TPI8P
[ 65.073467] tuner-simple 1-0061: type set to 28 (LG PAL_BG+FM (TPI8PSB01D))
[ 65.073473] tuner 1-0061: type set to LG PAL_BG+FM (TPI8P
[ 65.092648] bttv0: IRQ lockup, clearing GPINT from int mask [bits: OFLOW GPINT*]
[ 65.092818] bttv0: registered device video0
[ 65.092868] bttv0: registered device vbi0
[ 65.092921] bttv0: registered device radio0
[ 65.097192] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 65.114955] bt878: AUDIO driver version 0.0.0 loaded
[ 65.115094] bt878: Bt878 AUDIO function found (0).
[ 65.115140] ACPI: PCI Interrupt 0000:00:0e.1[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 65.115157] bt878_probe: card id=[0x13ea0070], Unknown card.
[ 65.115160] Exiting..
[ 65.115169] ACPI: PCI interrupt for device 0000:00:0e.1 disabled
[ 65.115186] bt878: probe of 0000:00:0e.1 failed with error -22
[ 70.367716] lp0: using parport0 (interrupt-driven).
[ 70.526157] Adding 1124540k swap on /dev/sda2. Priority:-1 extents:1 across:1124540k
[ 71.195120] EXT3 FS on sda1, internal journal
[ 73.292221] ip_tables: (C) 2000-2006 Netfilter Core Team
- Κώδικας: Επιλογή όλων
zeus@zeus-desktop:~$ lsmod
Module Size Used by
wlan_tkip 13696 2
af_packet 23812 4
ipv6 267908 8
radeon 124192 2
drm 82452 3 radeon
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61028 4 rfcomm,l2cap
ppdev 10372 0
speedstep_lib 6532 0
cpufreq_ondemand 9740 0
cpufreq_userspace 5284 0
cpufreq_conservative 8712 0
cpufreq_powersave 2688 0
cpufreq_stats 7104 0
freq_table 5536 2 cpufreq_ondemand,cpufreq_stats
sbs 15112 0
sbshc 7680 1 sbs
video 19856 0
output 4736 1 video
dock 11280 0
container 5632 0
battery 14212 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
ac 6916 0
lp 12324 0
bt878 11832 0
tuner 42912 0
tea5767 6788 1 tuner
tda8290 12420 1 tuner
tuner_simple 10248 1 tuner
mt20xx 13192 1 tuner
tea5761 6020 1 tuner
tvaudio 24732 0
wlan_scan_sta 14720 1
ath_rate_sample 14336 1
evdev 13056 4
snd_cmipci 38528 3
gameport 16008 1 snd_cmipci
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_pcm 78596 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 11400 1 snd_pcm
snd_opl3_lib 12928 1 snd_cmipci
snd_hwdep 10500 1 snd_opl3_lib
snd_mpu401_uart 9728 1 snd_cmipci
serio_raw 7940 0
psmouse 40336 0
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
pcspkr 4224 0
snd_rawmidi 25760 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
button 9232 0
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 9612 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
bttv 175860 1 bt878
ir_common 36100 1 bttv
ath_pci 101024 0
snd 56996 19 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
compat_ioctl32 2304 1 bttv
i2c_algo_bit 7300 1 bttv
videobuf_dma_sg 14980 1 bttv
videobuf_core 18820 2 bttv,videobuf_dma_sg
btcx_risc 5896 1 bttv
tveeprom 16656 1 bttv
videodev 29440 1 bttv
i2c_viapro 9876 0
i2c_core 24832 11 tuner,tea5767,tda8290,tuner_simple,mt20xx,tea5761,tvaudio,bttv,i2c_algo_bit,tveeprom,i2c_viapro
v4l2_common 18304 4 tuner,tvaudio,bttv,videodev
v4l1_compat 15492 2 bttv,videodev
wlan 207728 5 wlan_tkip,wlan_scan_sta,ath_rate_sample,ath_pci
via_agp 11136 1
via686a 15244 0
parport_pc 36260 1
parport 37832 3 ppdev,lp,parport_pc
soundcore 8800 1 snd
ath_hal 192592 3 ath_rate_sample,ath_pci
agpgart 34760 2 drm,via_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
ext3 136840 1
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 0
cdrom 37408 1 sr_mod
sd_mod 30720 3
8139cp 24704 0
pata_acpi 8320 0
floppy 59588 0
8139too 27520 0
mii 6400 2 8139cp,8139too
pata_via 13316 2
ata_generic 8324 0
uhci_hcd 27024 0
libata 159600 3 pata_acpi,pata_via,ata_generic
scsi_mod 151436 4 sg,sr_mod,sd_mod,libata
usbcore 146412 2 uhci_hcd
thermal 16796 0
processor 36488 2 thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 3
zeus@zeus-desktop:~$
zeus@zeus-desktop:~$