Ubuntu-gr Forum

lsusb -αποτέλεσμα-

Κώδικας: Επιλογή όλων

Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 04f2:b018 Chicony Electronics Co., Ltd Video Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci -nn- αποτέλεσμα

Κώδικας: Επιλογή όλων

kaftanis@spyroskaftanis-laptop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
0e:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
0e:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
0e:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)

dmesg- αποτέλεσμα

Κώδικας: Επιλογή όλων

[ 2.328325] usbcore: registered new interface driver usbfs
[ 2.328350] usbcore: registered new interface driver hub
[ 2.328382] usbcore: registered new device driver usb
[ 2.354263] USB Universal Host Controller Interface driver v3.0
[ 2.354326] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.354339] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.354346] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.354388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.354436] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.354579] usb usb1: configuration #1 chosen from 1 choice
[ 2.354606] hub 1-0:1.0: USB hub found
[ 2.354614] hub 1-0:1.0: 2 ports detected
[ 2.360406] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.444967] No dock devices found.
[ 2.460343] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.460359] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.460366] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.460390] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.460443] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.460543] usb usb2: configuration #1 chosen from 1 choice
[ 2.460570] hub 2-0:1.0: USB hub found
[ 2.460577] hub 2-0:1.0: 2 ports detected
[ 2.461159] SCSI subsystem initialized
[ 2.502034] libata version 3.00 loaded.
[ 2.668581] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.668605] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.668611] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.668642] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.672561] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.672574] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.672592] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[ 2.688077] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.688233] usb usb3: configuration #1 chosen from 1 choice
[ 2.688261] hub 3-0:1.0: USB hub found
[ 2.688270] hub 3-0:1.0: 4 ports detected
[ 2.892683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.892697] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.892704] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.892731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.892785] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.892874] usb usb4: configuration #1 chosen from 1 choice
[ 2.892899] hub 4-0:1.0: USB hub found
[ 2.892906] hub 4-0:1.0: 2 ports detected
[ 2.996733] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.996744] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.996750] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.996774] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 2.996816] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 2.996900] usb usb5: configuration #1 chosen from 1 choice
[ 2.996925] hub 5-0:1.0: USB hub found
[ 2.996931] hub 5-0:1.0: 2 ports detected
[ 3.000270] Clocksource tsc unstable (delta = -156510861 ns)
[ 3.100734] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.100745] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.100751] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.100774] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.100807] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.100889] usb usb6: configuration #1 chosen from 1 choice
[ 3.100912] hub 6-0:1.0: USB hub found
[ 3.100918] hub 6-0:1.0: 2 ports detected
[ 3.204991] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.205016] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.205022] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.205048] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.208974] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.208987] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.208993] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
[ 3.252273] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 3.264067] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.264193] usb usb7: configuration #1 chosen from 1 choice
[ 3.264237] hub 7-0:1.0: USB hub found
[ 3.264247] hub 7-0:1.0: 6 ports detected
[ 3.473381] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.473417] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.473437] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.473469] tg3.c:v3.94 (August 14, 2008)
[ 3.473474] ahci 0000:00:1f.2: version 3.0
[ 3.473526] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.473530] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.473548] tg3 0000:04:00.0: setting latency timer to 64
[ 3.473762] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 3.473766] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.473780] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.474258] scsi0 : ahci
[ 3.474360] scsi1 : ahci
[ 3.474417] scsi2 : ahci
[ 3.474527] ata1: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 217
[ 3.474531] ata2: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 217
[ 3.474534] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 217
[ 3.494042] usb 3-2: configuration #1 chosen from 1 choice
[ 3.782011] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:16:d4:d9:e4:ca
[ 3.782015] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 3.782018] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.792270] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.793059] ata1.00: _GTF unexpected object type 0x1
[ 3.839681] ata1.00: ATA-8: WDC WD1600BEVS-00UST0, 01.01A01, max UDMA/133
[ 3.839686] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.840804] ata1.00: _GTF unexpected object type 0x1
[ 3.840984] ata1.00: configured for UDMA/133
[ 3.848252] usb 7-1: new high speed USB device using ehci_hcd and address 2
[ 3.981306] usb 7-1: configuration #1 chosen from 1 choice
[ 4.176257] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.220246] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.383893] usb 2-1: configuration #1 chosen from 1 choice
[ 4.517268] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.532394] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 01.0 PQ: 0 ANSI: 5
[ 4.536280] ohci1394 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.589083] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.602607] ata_piix 0000:00:1f.1: version 2.12
[ 4.602621] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.602681] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.602762] scsi3 : ata_piix
[ 4.603290] scsi4 : ata_piix
[ 4.604073] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.604076] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.612806] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.624861] Driver 'sd' needs updating - please use bus_type methods
[ 4.624957] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.624974] sd 0:0:0:0: [sda] Write Protect is off
[ 4.624976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.625001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.625106] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.625120] sd 0:0:0:0: [sda] Write Protect is off
[ 4.625123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.625148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.625151] sda: sda1 sda2 < sda5 >
[ 4.702130] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.764713] ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33
[ 4.780583] ata4.00: configured for UDMA/33
[ 4.950937] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5
[ 4.951150] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.978306] Driver 'sr' needs updating - please use bus_type methods
[ 4.988744] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.988750] Uniform CD-ROM driver Revision: 3.20
[ 4.988885] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.108089] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 5.217484] PM: Starting manual resume from disk
[ 5.217487] PM: Resume from partition 8:5
[ 5.217489] PM: Checking hibernation image.
[ 5.217692] PM: Resume from disk failed.
[ 5.296040] kjournald starting. Commit interval 5 seconds
[ 5.296069] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.872222] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75bc40024e]
[ 12.072215] udevd version 124 started
[ 12.417522] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.429053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.440279] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.461038] ACPI: Power Button (FF) [PWRF]
[ 12.461121] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.461197] ACPI: Lid Switch [LID0]
[ 12.461248] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.492442] Linux agpgart interface v0.103
[ 12.493023] ACPI: Power Button (CM) [PWRB]
[ 12.529171] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.529665] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.532177] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.750474] acpi device:0a: registered as cooling_device2
[ 12.750830] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5
[ 12.773035] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.773333] ACPI: WMI: Mapper loaded
[ 12.778476] ACPI: AC Adapter [ACAD] (on-line)
[ 12.829673] ACPI: Battery Slot [BAT1] (battery present)
[ 13.053269] Bluetooth: Core ver 2.13
[ 13.057267] NET: Registered protocol family 31
[ 13.057269] Bluetooth: HCI device and connection manager initialized
[ 13.057273] Bluetooth: HCI socket layer initialized
[ 13.108109] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.108207] usbcore: registered new interface driver btusb
[ 13.284265] Linux video capture interface: v2.00
[ 13.344147] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[ 13.345835] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input6
[ 13.345879] usbcore: registered new interface driver uvcvideo
[ 13.345895] USB Video Class driver (v0.1.0)
[ 13.455083] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.455123] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.486876] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 13.647027] iTCO_vendor_support: vendor-support=0
[ 13.659203] sdhci: Secure Digital Host Controller Interface driver
[ 13.659206] sdhci: Copyright(c) Pierre Ossman
[ 13.661279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.662018] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 13.662183] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.678884] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.742248] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 13.742274] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 13.743290] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 13.745375] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[ 13.926134] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 13.926137] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 13.938736] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.938770] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 13.938845] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 13.986143] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 14.001582] iwlagn 0000:0c:00.0: PCI INT A disabled
[ 14.002022] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.052776] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 17.106757] lp: driver loaded but no devices found
[ 17.291807] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 17.836655] EXT3 FS on sda1, internal journal
[ 18.831886] type=1505 audit(1247562350.913:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4321
[ 18.983482] type=1505 audit(1247562351.065:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4326
[ 18.983718] type=1505 audit(1247562351.065:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4326
[ 19.200259] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.848492] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 20.944376] apm: BIOS not found.
[ 21.120327] ppdev: user-space parallel port driver
[ 23.752164] Bluetooth: L2CAP ver 2.11
[ 23.752176] Bluetooth: L2CAP socket layer initialized
[ 23.801536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.801550] Bluetooth: BNEP filters: protocol multicast
[ 23.872521] Bridge firewalling registered
[ 23.897184] Bluetooth: RFCOMM socket layer initialized
[ 23.897209] Bluetooth: RFCOMM TTY layer initialized
[ 23.897214] Bluetooth: RFCOMM ver 1.10
[ 23.927616] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.927627] Bluetooth: SCO socket layer initialized
[ 28.182887] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 28.183111] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
[ 28.186689] firmware: requesting iwlwifi-4965-2.ucode
[ 28.381547] [drm] Initialized drm 1.1.0 20060810
[ 28.433365] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.433385] pci 0000:00:02.0: setting latency timer to 64
[ 28.435673] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 28.471018] Registered led device: iwl-phy0:radio
[ 28.471073] Registered led device: iwl-phy0:assoc
[ 28.471114] Registered led device: iwl-phy0:RX
[ 28.471163] Registered led device: iwl-phy0:TX
[ 28.611790] NET: Registered protocol family 17
[ 72.015005] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 72.017394] wlan0: authenticated
[ 72.017408] wlan0: associate with AP 00:13:33:17:ea:82
[ 72.019600] wlan0: RX AssocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 72.019612] wlan0: associated
[ 73.184535] CPU0 attaching NULL sched-domain.
[ 73.184560] CPU1 attaching NULL sched-domain.
[ 73.186340] CPU0 attaching sched-domain:
[ 73.186350] domain 0: span 0-1 level MC
[ 73.186357] groups: 0 1
[ 73.186371] CPU1 attaching sched-domain:
[ 73.186376] domain 0: span 0-1 level MC
[ 73.186382] groups: 1 0
[ 75.476729] NET: Registered protocol family 10
[ 75.479398] lo: Disabled Privacy Extensions
[ 75.483009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.148188] wlan0: no IPv6 routers present
[ 352.576105] CE: hpet increasing min_delta_ns to 15000 nsec
[ 695.620996] usb 7-1: USB disconnect, address 2
[ 697.141217] usb 3-1: new high speed USB device using ehci_hcd and address 4
[ 697.827162] usb 3-1: configuration #1 chosen from 1 choice
[ 1273.217312] type=1505 audit(1247563605.301:5): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=6835
[ 1273.422155] type=1505 audit(1247563605.505:6): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=6840
[ 1273.422498] type=1505 audit(1247563605.505:7): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=6840
[ 1273.470912] type=1505 audit(1247563605.552:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=6844
[ 2574.393131] wlan0: No ProbeResp from current AP 00:13:33:17:ea:82 - assume out of range
[ 2576.188433] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 2576.190791] wlan0: authenticated
[ 2576.190805] wlan0: associate with AP 00:13:33:17:ea:82
[ 2576.194655] wlan0: associate with AP 00:13:33:17:ea:82
[ 2576.195229] iwlagn: index 0 not used in uCode key table.
[ 2576.199722] wlan0: RX ReassocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 2576.199734] wlan0: associated
[ 2697.385275] usb 3-1: USB disconnect, address 4
[ 2699.580099] usb 7-1: new high speed USB device using ehci_hcd and address 3
[ 2700.250141] usb 7-1: configuration #1 chosen from 1 choice
[ 3336.552204] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 3336.607625] saa7134 ALSA driver for DMA sound loaded
[ 3336.607637] saa7134 ALSA: no saa7134 cards found
[ 3383.616570] usb 7-1: USB disconnect, address 3
[ 3416.005090] usb 3-1: new high speed USB device using ehci_hcd and address 5
[ 3416.695914] usb 3-1: configuration #1 chosen from 1 choice
[ 5084.317478] UDF-fs: No VRS found
[ 5084.352185] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5084.353463] ISOFS: changing to secondary root
[ 5520.189158] usb 7-6: new high speed USB device using ehci_hcd and address 4
[ 5520.329062] usb 7-6: configuration #1 chosen from 1 choice
[ 5520.479094] em28xx v4l2 driver version 0.1.0 loaded
[ 5520.479137] em28xx new video device (eb1a:e323): interface 0, class 255
[ 5520.479142] em28xx Doesn't have usb audio class
[ 5520.479150] em28xx #0: Alternate settings: 8
[ 5520.479152] em28xx #0: Alternate setting 0, max size= 0
[ 5520.479154] em28xx #0: Alternate setting 1, max size= 0
[ 5520.479162] em28xx #0: Alternate setting 2, max size= 1448
[ 5520.479164] em28xx #0: Alternate setting 3, max size= 2048
[ 5520.479167] em28xx #0: Alternate setting 4, max size= 2304
[ 5520.479170] em28xx #0: Alternate setting 5, max size= 2580
[ 5520.479172] em28xx #0: Alternate setting 6, max size= 2892
[ 5520.479174] em28xx #0: Alternate setting 7, max size= 3072
[ 5520.479364] em28xx #0: chip ID is em2882/em2883
[ 5520.513449] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00
[ 5520.513486] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[ 5520.513516] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 5520.513543] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 5520.513571] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513599] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513627] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 5520.513654] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[ 5520.513682] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 5520.513711] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513738] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513765] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513794] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513821] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513848] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513875] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513905] EEPROM ID= 0x9567eb1a, hash = 0x4e913442
[ 5520.513911] Vendor/Product ID= eb1a:e323
[ 5520.513915] AC97 audio (5 sample rates)
[ 5520.513919] 500mA max power
[ 5520.513923] Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 5520.513931] em28xx #0:
[ 5520.513933]
[ 5520.513939] em28xx #0: The support for this board weren't valid yet.
[ 5520.513945] em28xx #0: Please send a report of having this working
[ 5520.513950] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 5520.513953]
[ 5520.645743] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 5520.778052] xc2028 0-0061: creating new instance
[ 5520.778067] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 5520.778090] firmware: requesting xc3028-v27.fw
[ 5520.783983] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[ 5520.888516] tvp5150 0-005c: tvp5150am1 detected.
[ 5521.045364] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 5521.045379] em28xx #0: Found Kworld VS-DVB-T 323UR
[ 5521.045458] usbcore: registered new interface driver em28xx
[ 5521.081611] tvp5150 0-005c: tvp0050am1 detected.
[ 5521.105824] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 5521.105837] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 5521.106698] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 5544.303053] usb 7-6: USB disconnect, address 4
[ 5544.309400] em28xx #0: disconnecting em28xx #0 video
[ 5544.310641] em28xx #0: V4L2 devices /dev/video1 and /dev/vbi0 deregistered
[ 5544.312361] xc2028 0-0061: destroying instance
[ 5561.861286] usb 7-5: new high speed USB device using ehci_hcd and address 5
[ 5561.996673] usb 7-5: configuration #1 chosen from 1 choice
[ 5561.998426] em28xx new video device (eb1a:e323): interface 0, class 255
[ 5561.998442] em28xx Doesn't have usb audio class
[ 5561.998447] em28xx #0: Alternate settings: 8
[ 5561.998452] em28xx #0: Alternate setting 0, max size= 0
[ 5561.998457] em28xx #0: Alternate setting 1, max size= 0
[ 5561.998463] em28xx #0: Alternate setting 2, max size= 1448
[ 5561.998468] em28xx #0: Alternate setting 3, max size= 2048
[ 5561.998473] em28xx #0: Alternate setting 4, max size= 2304
[ 5561.998479] em28xx #0: Alternate setting 5, max size= 2580
[ 5561.998484] em28xx #0: Alternate setting 6, max size= 2892
[ 5561.998489] em28xx #0: Alternate setting 7, max size= 3072
[ 5562.003902] em28xx #0: chip ID is em2882/em2883
[ 5562.053781] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 5562.092764] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00
[ 5562.092780] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[ 5562.092791] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 5562.092802] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 5562.092813] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092830] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092840] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 5562.092851] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[ 5562.092862] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 5562.092873] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092883] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092894] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092905] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092916] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092926] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092937] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092949] EEPROM ID= 0x9567eb1a, hash = 0x4e913442
[ 5562.092951] Vendor/Product ID= eb1a:e323
[ 5562.092953] AC97 audio (5 sample rates)
[ 5562.092954] 500mA max power
[ 5562.092956] Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 5562.092959] em28xx #0:
[ 5562.092960]
[ 5562.092962] em28xx #0: The support for this board weren't valid yet.
[ 5562.092965] em28xx #0: Please send a report of having this working
[ 5562.092967] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 5562.092968]
[ 5562.106756] xc2028 0-0061: creating new instance
[ 5562.106763] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 5562.106773] firmware: requesting xc3028-v27.fw
[ 5562.111062] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[ 5562.201696] tvp5150 0-005c: tvp5150am1 detected.
[ 5562.391786] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 5562.391897] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 5562.391904] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 5562.395341] em28xx #0: Found Kworld VS-DVB-T 323UR
[ 5562.477759] tvp5150 0-005c: tvp5150am1 detected.
[ 6483.574126] usb 3-1: USB disconnect, address 5
[ 7551.400778] usb 7-5: USB disconnect, address 5
[ 7551.405181] em28xx #0: disconnecting em28xx #0 video
[ 7551.405196] em28xx #0: V4L2 devices /dev/video1 and /dev/vbi0 deregistered
[ 7551.405435] xc2028 0-0061: destroying instance
[ 9684.837099] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 9685.156390] usb 1-1: configuration #1 chosen from 1 choice
[ 9685.317806] usbcore: registered new interface driver hiddev
[ 9685.390475] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input9
[ 9685.418328] input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-1
[ 9685.418429] usbcore: registered new interface driver usbhid
[ 9685.418437] usbhid: v2.6:USB HID core driver
[ 9702.425220] usb 1-1: USB disconnect, address 2
[ 9708.212451] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 9708.598071] usb 1-1: configuration #1 chosen from 1 choice
[ 9708.710330] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input10
[ 9708.760199] input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-1
[ 9804.903885] CPU0 attaching NULL sched-domain.
[ 9804.903898] CPU1 attaching NULL sched-domain.
[ 9804.905122] CPU0 attaching sched-domain:
[ 9804.905129] domain 0: span 0-1 level MC
[ 9804.905134] groups: 0 1
[ 9804.905141] domain 1: span 0-1 level CPU
[ 9804.905145] groups: 0-1
[ 9804.905152] CPU1 attaching sched-domain:
[ 9804.905155] domain 0: span 0-1 level MC
[ 9804.905160] groups: 1 0
[ 9804.905166] domain 1: span 0-1 level CPU
[ 9804.905170] groups: 0-1
[12030.181685] CPU0 attaching NULL sched-domain.
[12030.181719] CPU1 attaching NULL sched-domain.
[12030.187825] CPU0 attaching sched-domain:
[12030.187833] domain 0: span 0-1 level MC
[12030.187838] groups: 0 1
[12030.187848] CPU1 attaching sched-domain:
[12030.187851] domain 0: span 0-1 level MC
[12030.187855] groups: 1 0
[12079.505221] usb 1-1: USB disconnect, address 3
[12539.030580] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[12644.192090] usb 7-1: new high speed USB device using ehci_hcd and address 6
[12644.870728] usb 7-1: configuration #1 chosen from 1 choice

Υ/Γ χρειάζομαι την κάρτα αυτή για να την συνδέσω με το Playstation 3 η οθόνη του Υπολογιστή μου να λειτουργεί ως οθόνη του playstation. άρα γι αυτό βγήκε μεταξύ των άλλων και αυτή η σειρά: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input9