Δημοσιεύτηκε: 12 Νοέμ 2009, 15:18
To TVTime δεν εχει Video Source
To xawtv από μενού δεν ανοίγει. Από τερματικό δίνει
To xawtv από μενού δεν ανοίγει. Από τερματικό δίνει
- Κώδικας: Επιλογή όλων
petros@petros-desktop:~$ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.31-14-generic)
xinerama 0: 1680x1050+0+0
WARNING: No DGA direct video mode for this display.
can't open /dev/video0: No such file or directory
v4l-conf had some trouble, trying to continue anyway
v4l2: open /dev/video0: No such file or directory
v4l2: open /dev/video0: No such file or directory
v4l: open /dev/video0: No such file or directory
no video grabber device available
- Κώδικας: Επιλογή όλων
petros@petros-desktop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
01:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
- Κώδικας: Επιλογή όλων
[ 0.001332] Console: colour VGA+ 80x25
[ 0.001336] console [tty0] enabled
[ 0.001476] hpet clockevent registered
[ 0.001480] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.001485] Calibrating delay loop (skipped), value calculated using timer frequency.. 4436.08 BogoMIPS (lpj=8872160)
[ 0.001501] Security Framework initialized
[ 0.001517] AppArmor: AppArmor initialized
[ 0.001524] Mount-cache hash table entries: 512
[ 0.001639] Initializing cgroup subsys ns
[ 0.001643] Initializing cgroup subsys cpuacct
[ 0.001647] Initializing cgroup subsys memory
[ 0.001653] Initializing cgroup subsys freezer
[ 0.001655] Initializing cgroup subsys net_cls
[ 0.001668] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.001670] CPU: L2 cache: 512K
[ 0.001673] CPU: Physical Processor ID: 0
[ 0.001674] CPU: Processor Core ID: 0
[ 0.001678] mce: CPU supports 6 MCE banks
[ 0.001685] CPU0: Thermal monitoring enabled (TM2)
[ 0.001688] using mwait in idle threads.
[ 0.001693] Performance Counters: Core2 events, Intel PMU driver.
[ 0.001701] ... version: 2
[ 0.001702] ... bit width: 40
[ 0.001704] ... generic counters: 2
[ 0.001706] ... value mask: 000000ffffffffff
[ 0.001707] ... max period: 000000007fffffff
[ 0.001709] ... fixed-purpose counters: 3
[ 0.001710] ... counter mask: 0000000700000003
[ 0.001714] Checking 'hlt' instruction... OK.
[ 0.018436] ACPI: Core revision 20090521
[ 0.028365] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071350] CPU0: Intel(R) Celeron(R) CPU E1500 @ 2.20GHz stepping 0d
[ 0.072001] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms
[ 0.072001] APIC delta adjusted to PM-Timer: 1260325 (1764439)
[ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4436.40 BogoMIPS (lpj=8872801)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 512K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] mce: CPU supports 6 MCE banks
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.157215] CPU1: Intel(R) Celeron(R) CPU E1500 @ 2.20GHz stepping 0d
[ 0.157227] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160021] Brought up 2 CPUs
[ 0.160023] Total of 2 processors activated (8872.48 BogoMIPS).
[ 0.160066] CPU0 attaching sched-domain:
[ 0.160069] domain 0: span 0-1 level MC
[ 0.160071] groups: 0 1
[ 0.160077] CPU1 attaching sched-domain:
[ 0.160079] domain 0: span 0-1 level MC
[ 0.160081] groups: 1 0
[ 0.160153] Booting paravirtualized kernel on bare hardware
[ 0.160198] regulator: core version 0.5
[ 0.160198] Time: 14:06:33 Date: 11/12/09
[ 0.160198] NET: Registered protocol family 16
[ 0.160201] EISA bus registered
[ 0.160213] ACPI: bus type pci registered
[ 0.160278] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.160281] PCI: Not using MMCONFIG.
[ 0.160430] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.160432] PCI: Using configuration type 1 for base access
[ 0.161402] bio: create slab <bio-0> at 0
[ 0.164140] ACPI: EC: Look up EC in DSDT
[ 0.172189] ACPI: Interpreter enabled
[ 0.172198] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.172221] ACPI: Using IOAPIC for interrupt routing
[ 0.172272] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.175290] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.175292] PCI: Using MMCONFIG for extended config space
[ 0.182889] ACPI Warning: Incorrect checksum in table [OEMB] - FB, should be EE 20090521 tbutils-246
[ 0.183684] ACPI: No dock devices found.
[ 0.183803] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.183895] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff]
[ 0.183900] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
[ 0.183905] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff]
[ 0.183910] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.183988] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea78000-0xfea7bfff]
[ 0.184046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.184050] pci 0000:00:1b.0: PME# disabled
[ 0.184109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.184112] pci 0000:00:1c.0: PME# disabled
[ 0.184172] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.184176] pci 0000:00:1c.1: PME# disabled
[ 0.184225] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
[ 0.184273] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
[ 0.184321] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
[ 0.184369] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
[ 0.184422] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea77c00-0xfea77fff]
[ 0.184473] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.184477] pci 0000:00:1d.7: PME# disabled
[ 0.184596] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.184600] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.184603] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[ 0.184646] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.184652] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.184659] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.184665] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.184672] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.184714] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
[ 0.184720] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
[ 0.184726] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
[ 0.184732] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
[ 0.184737] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
[ 0.184761] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.184765] pci 0000:00:1f.2: PME# disabled
[ 0.184809] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.184930] pci 0000:01:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
[ 0.184938] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.184998] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.185003] pci 0000:01:00.0: PME# disabled
[ 0.185054] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
[ 0.185058] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.185109] pci 0000:00:1e.0: transparent bridge
[ 0.185131] pci_bus 0000:00: on NUMA node 0
[ 0.185138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.185369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.185425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.193763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.193874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.193980] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.194085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.194189] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.194296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.194403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.194513] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.194700] SCSI subsystem initialized
[ 0.194739] libata version 3.00 loaded.
[ 0.194739] usbcore: registered new interface driver usbfs
[ 0.194739] usbcore: registered new interface driver hub
[ 0.194739] usbcore: registered new device driver usb
[ 0.194739] ACPI: WMI: Mapper loaded
[ 0.194739] PCI: Using ACPI for IRQ routing
[ 0.204013] Bluetooth: Core ver 2.15
[ 0.204044] NET: Registered protocol family 31
[ 0.204044] Bluetooth: HCI device and connection manager initialized
[ 0.204044] Bluetooth: HCI socket layer initialized
[ 0.204044] NetLabel: Initializing
[ 0.204044] NetLabel: domain hash size = 128
[ 0.204044] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.204056] NetLabel: unlabeled traffic allowed by default
[ 0.204103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.204112] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.220058] pnp: PnP ACPI init
[ 0.220084] ACPI: bus type pnp registered
[ 0.224311] pnp: PnP ACPI: found 19 devices
[ 0.224314] ACPI: ACPI bus type pnp unregistered
[ 0.224318] PnPBIOS: Disabled by ACPI PNP
[ 0.224331] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.224340] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.224346] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.224349] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.224351] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.224354] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.224357] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.224363] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.224368] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.224371] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.224377] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.224383] system 00:12: iomem range 0x0-0x9ffff could not be reserved
[ 0.224385] system 00:12: iomem range 0xc0000-0xcffff could not be reserved
[ 0.224388] system 00:12: iomem range 0xe0000-0xfffff could not be reserved
[ 0.224391] system 00:12: iomem range 0x100000-0xdf6fffff could not be reserved
[ 0.259049] AppArmor: AppArmor Filesystem Enabled
[ 0.259088] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.259090] pci 0000:00:1c.0: IO window: disabled
[ 0.259095] pci 0000:00:1c.0: MEM window: disabled
[ 0.259098] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.259102] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01
[ 0.259106] pci 0000:00:1c.1: IO window: 0xe000-0xefff
[ 0.259110] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
[ 0.259114] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.259118] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.259120] pci 0000:00:1e.0: IO window: disabled
[ 0.259124] pci 0000:00:1e.0: MEM window: disabled
[ 0.259128] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.259142] alloc irq_desc for 16 on node -1
[ 0.259143] alloc kstat_irqs on node -1
[ 0.259150] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.259154] pci 0000:00:1c.0: setting latency timer to 64
[ 0.259161] alloc irq_desc for 17 on node -1
[ 0.259162] alloc kstat_irqs on node -1
[ 0.259166] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.259169] pci 0000:00:1c.1: setting latency timer to 64
[ 0.259175] pci 0000:00:1e.0: setting latency timer to 64
[ 0.259180] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.259182] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.259185] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.259187] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.259189] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.259191] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.259228] NET: Registered protocol family 2
[ 0.259322] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.259612] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.260116] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.260384] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.260388] TCP reno registered
[ 0.260499] NET: Registered protocol family 1
[ 0.260567] Trying to unpack rootfs image as initramfs...
[ 0.432197] Freeing initrd memory: 7460k freed
[ 0.435904] cpufreq-nforce2: No nForce2 chipset.
[ 0.435931] Scanning for low memory corruption every 60 seconds
[ 0.436027] audit: initializing netlink socket (disabled)
[ 0.436043] type=2000 audit(1258034792.432:1): initialized
[ 0.443796] highmem bounce pool size: 64 pages
[ 0.443801] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.445161] VFS: Disk quotas dquot_6.5.2
[ 0.445224] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.445749] fuse init (API version 7.12)
[ 0.445833] msgmni has been set to 1666
[ 0.446047] alg: No test for stdrng (krng)
[ 0.446062] io scheduler noop registered
[ 0.446064] io scheduler anticipatory registered
[ 0.446066] io scheduler deadline registered
[ 0.446117] io scheduler cfq registered (default)
[ 0.446129] pci 0000:00:02.0: Boot video device
[ 0.446306] alloc irq_desc for 24 on node -1
[ 0.446308] alloc kstat_irqs on node -1
[ 0.446318] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.446326] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.446441] alloc irq_desc for 25 on node -1
[ 0.446443] alloc kstat_irqs on node -1
[ 0.446450] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.446458] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.446539] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.446613] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.446744] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.446748] ACPI: Power Button [PWRF]
[ 0.446803] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.446806] ACPI: Power Button [PWRB]
[ 0.447350] ACPI: SSDT df6a00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.447651] processor LNXCPU:00: registered as cooling_device0
[ 0.447930] ACPI: SSDT df6a0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.448235] processor LNXCPU:01: registered as cooling_device1
[ 0.450519] isapnp: Scanning for PnP cards...
[ 0.501314] Switched to high resolution mode on CPU 1
[ 0.504062] Switched to high resolution mode on CPU 0
[ 0.803521] isapnp: No Plug & Play device found
[ 0.804625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.804726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.805214] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.806169] brd: module loaded
[ 0.806599] loop: module loaded
[ 0.806680] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.806782] ata_piix 0000:00:1f.1: version 2.13
[ 0.806797] alloc irq_desc for 18 on node -1
[ 0.806800] alloc kstat_irqs on node -1
[ 0.806807] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.806845] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.806925] scsi0 : ata_piix
[ 0.807027] scsi1 : ata_piix
[ 0.808143] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.808147] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.808176] alloc irq_desc for 19 on node -1
[ 0.808178] alloc kstat_irqs on node -1
[ 0.808185] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.808193] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.808233] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.808304] scsi2 : ata_piix
[ 0.808370] scsi3 : ata_piix
[ 0.809654] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
[ 0.809657] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
[ 0.810435] Fixed MDIO Bus: probed
[ 0.810467] PPP generic driver version 2.4.2
[ 0.810578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.810602] alloc irq_desc for 23 on node -1
[ 0.810604] alloc kstat_irqs on node -1
[ 0.810611] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.810627] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.810630] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.810684] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.814600] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.814606] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.814622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00
[ 0.828034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.828171] usb usb1: configuration #1 chosen from 1 choice
[ 0.828217] hub 1-0:1.0: USB hub found
[ 0.828226] hub 1-0:1.0: 8 ports detected
[ 0.828301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.828322] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.828359] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.828366] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.828369] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.828409] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.828434] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[ 0.828520] usb usb2: configuration #1 chosen from 1 choice
[ 0.828546] hub 2-0:1.0: USB hub found
[ 0.828552] hub 2-0:1.0: 2 ports detected
[ 0.828600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.828606] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.828610] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.828644] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.828668] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[ 0.828747] usb usb3: configuration #1 chosen from 1 choice
[ 0.828773] hub 3-0:1.0: USB hub found
[ 0.828779] hub 3-0:1.0: 2 ports detected
[ 0.828827] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.828833] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.828837] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.828872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.828903] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 0.828984] usb usb4: configuration #1 chosen from 1 choice
[ 0.829010] hub 4-0:1.0: USB hub found
[ 0.829016] hub 4-0:1.0: 2 ports detected
[ 0.829068] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.829074] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.829077] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.829111] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.829142] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[ 0.829226] usb usb5: configuration #1 chosen from 1 choice
[ 0.829251] hub 5-0:1.0: USB hub found
[ 0.829257] hub 5-0:1.0: 2 ports detected
[ 0.829364] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.832064] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.832071] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.832136] mice: PS/2 mouse device common for all mice
[ 0.832228] rtc_cmos 00:03: RTC can wake from S4
[ 0.832265] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.832289] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.832392] device-mapper: uevent: version 1.0.3
[ 0.832498] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.832575] device-mapper: multipath: version 1.1.0 loaded
[ 0.832578] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.832707] EISA: Probing bus 0 at eisa.0
[ 0.832733] EISA: Detected 0 cards.
[ 0.832815] cpuidle: using governor ladder
[ 0.832817] cpuidle: using governor menu
[ 0.833303] TCP cubic registered
[ 0.833453] NET: Registered protocol family 10
[ 0.833892] lo: Disabled Privacy Extensions
[ 0.834206] NET: Registered protocol family 17
[ 0.834229] Bluetooth: L2CAP ver 2.13
[ 0.834230] Bluetooth: L2CAP socket layer initialized
[ 0.834233] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.834234] Bluetooth: SCO socket layer initialized
[ 0.834277] Bluetooth: RFCOMM TTY layer initialized
[ 0.834281] Bluetooth: RFCOMM socket layer initialized
[ 0.834283] Bluetooth: RFCOMM ver 1.11
[ 0.834690] Using IPI No-Shortcut mode
[ 0.834760] PM: Resume from disk failed.
[ 0.834774] registered taskstats version 1
[ 0.834876] Magic number: 1:481:131
[ 0.834915] acpi device:06: hash matches
[ 0.834918] acpi PNP0C02:03: hash matches
[ 0.834948] rtc_cmos 00:03: setting system clock to 2009-11-12 14:06:33 UTC (1258034793)
[ 0.834951] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.834953] EDD information not available.
[ 1.019706] ata3.00: ATA-8: ST3320613AS, SD22, max UDMA/133
[ 1.019712] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.019772] ata3.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100
[ 1.075669] ata3.00: configured for UDMA/133
[ 1.088241] ata3.01: configured for UDMA/100
[ 1.088729] scsi 2:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5
[ 1.088864] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.088878] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.088976] sd 2:0:0:0: [sda] Write Protect is off
[ 1.088979] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.089475] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.090125] scsi 2:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5
[ 1.091874] sda: sda1 sda2 < sda5 sda6sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.140242] Uniform CD-ROM driver Revision: 3.20
[ 1.140338] sr 2:0:1:0: Attached scsi CD-ROM sr0
[ 1.140388] sr 2:0:1:0: Attached scsi generic sg1 type 5
[ 1.165414] sda7 sda8 >
[ 1.186508] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.186525] Freeing unused kernel memory: 540k freed
[ 1.186803] Write protecting the kernel text: 4568k
[ 1.186845] Write protecting the kernel read-only data: 1836k
[ 1.196541] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.300509] Linux agpgart interface v0.103
[ 1.302980] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 1.303186] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 1.305923] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.354685] usb 1-4: configuration #1 chosen from 1 choice
[ 1.379749] [drm] Initialized drm 1.1.0 20060810
[ 1.423747] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.423753] i915 0000:00:02.0: setting latency timer to 64
[ 1.425195] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 1.425198] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 1.426030] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.426041] ATL1E 0000:01:00.0: setting latency timer to 64
[ 1.427492] Floppy drive(s): fd0 is 1.44M
[ 1.428389] alloc irq_desc for 26 on node -1
[ 1.428392] alloc kstat_irqs on node -1
[ 1.428402] i915 0000:00:02.0: irq 26 for MSI/MSI-X
[ 1.428850] intel drm CRTDDC_A: Test OK
[ 1.439276] Initializing USB Mass Storage driver...
[ 1.439470] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.439574] usb-storage: device found at 3
[ 1.439576] usb-storage: waiting for device to settle before scanning
[ 1.439592] usbcore: registered new interface driver usb-storage
[ 1.439595] USB Mass Storage support registered.
[ 1.443686] FDC 0 is a post-1991 82077
[ 1.472018] usb 1-6: new high speed USB device using ehci_hcd and address 4
[ 1.560280] [drm] fb0: inteldrmfb frame buffer device
[ 1.560354] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.626843] [drm] DAC-6: set mode 1920x1080 14
[ 1.654269] Console: switching to colour frame buffer device 240x67
[ 1.790227] usb 1-6: configuration #1 chosen from 1 choice
[ 2.040213] PM: Starting manual resume from disk
[ 2.040217] PM: Resume from partition 8:7
[ 2.040219] PM: Checking hibernation image.
[ 2.040587] PM: Resume from disk failed.
[ 2.044061] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.059410] EXT4-fs (sda6): barriers enabled
[ 2.072393] kjournald2 starting: pid 413, dev sda6:8, commit interval 5 seconds
[ 2.072422] EXT4-fs (sda6): delayed allocation enabled
[ 2.072428] EXT4-fs: file extents enabled
[ 2.075205] EXT4-fs: mballoc enabled
[ 2.075220] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 2.223682] usb 2-1: configuration #1 chosen from 1 choice
[ 2.248716] usbcore: registered new interface driver hiddev
[ 2.251759] usbcore: registered new interface driver usbhid
[ 2.251762] usbhid: v2.6:USB HID core driver
[ 2.268906] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
[ 2.268972] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input0
[ 2.296589] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
[ 2.297464] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4
[ 2.297599] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input1
[ 2.441819] type=1505 audit(1258034795.105:2): operation="profile_load" pid=444 name=/usr/share/gdm/guest-session/Xsession
[ 2.445406] type=1505 audit(1258034795.109:3): operation="profile_load" pid=445 name=/sbin/dhclient3
[ 2.446078] type=1505 audit(1258034795.109:4): operation="profile_load" pid=445 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 2.446438] type=1505 audit(1258034795.109:5): operation="profile_load" pid=445 name=/usr/lib/connman/scripts/dhclient-script
[ 2.476865] type=1505 audit(1258034795.141:6): operation="profile_load" pid=446 name=/usr/bin/evince
[ 2.487403] type=1505 audit(1258034795.149:7): operation="profile_load" pid=446 name=/usr/bin/evince-previewer
[ 2.493607] type=1505 audit(1258034795.157:8): operation="profile_load" pid=446 name=/usr/bin/evince-thumbnailer
[ 2.529801] type=1505 audit(1258034795.193:9): operation="profile_load" pid=448 name=/usr/lib/cups/backend/cups-pdf
[ 2.530588] type=1505 audit(1258034795.193:10): operation="profile_load" pid=448 name=/usr/sbin/cupsd
[ 3.226504] Adding 4000144k swap on /dev/sda7. Priority:-1 extents:1 across:4000144k
[ 3.488575] EXT4-fs (sda6): internal journal on sda6:8
[ 3.713037] EXT4-fs (sda8): barriers enabled
[ 3.714865] kjournald2 starting: pid 502, dev sda8:8, commit interval 5 seconds
[ 3.715395] EXT4-fs (sda8): internal journal on sda8:8
[ 3.715402] EXT4-fs (sda8): delayed allocation enabled
[ 3.715407] EXT4-fs: file extents enabled
[ 3.716978] EXT4-fs: mballoc enabled
[ 3.716994] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 5.853381] udev: starting version 147
[ 6.436186] usb-storage: device scan complete
[ 6.439690] scsi 4:0:0:0: Direct-Access WDC WD10 EVDS-63N5B1 PQ: 0 ANSI: 2
[ 6.440212] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.443944] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 6.446280] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.446286] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00
[ 6.446290] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.449529] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.449536] sdb:
[ 7.602631] alloc irq_desc for 27 on node -1
[ 7.602636] alloc kstat_irqs on node -1
[ 7.602653] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X
[ 7.602915] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.944595] cfg80211: Calling CRDA to update world regulatory domain
[ 10.136707] cfg80211: World regulatory domain updated:
[ 10.136711] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.136714] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.136717] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.136719] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.136721] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.136724] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.506325] intel_rng: FWH not detected
[ 12.865451] sdb1 sdb2 < sdb5 sdb6 >
[ 12.907804] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 12.907854] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 12.943507] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.104020] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.104058] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.121567] lp: driver loaded but no devices found
[ 14.178879] Linux video capture interface: v2.00
[ 14.244272] phy0: Selected rate control algorithm 'minstrel'
[ 14.245058] Registered led device: rt2500usb-phy0::radio
[ 14.245077] Registered led device: rt2500usb-phy0::quality
[ 14.245526] usbcore: registered new interface driver rt2500usb
[ 14.719852] parport_pc 00:07: reported by Plug and Play ACPI
[ 14.719960] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 14.736386] ppdev: user-space parallel port driver
[ 14.736528] bttv: driver version 0.9.18 loaded
[ 14.736532] bttv: using 8 buffers with 2080k (520 pages) each for capture
[ 14.816806] lp0: using parport0 (interrupt-driven).
[ 15.352195] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.416847] CPU0 attaching NULL sched-domain.
[ 19.416854] CPU1 attaching NULL sched-domain.
[ 19.436109] CPU0 attaching sched-domain:
[ 19.436116] domain 0: span 0-1 level MC
[ 19.436121] groups: 0 1
[ 19.436128] domain 1: span 0-1 level CPU
[ 19.436132] groups: 0-1 (__cpu_power = 2048)
[ 19.436141] CPU1 attaching sched-domain:
[ 19.436145] domain 0: span 0-1 level MC
[ 19.436149] groups: 1 0
[ 19.436155] domain 1: span 0-1 level CPU
[ 19.436159] groups: 0-1 (__cpu_power = 2048)
[ 23.259237] CPU0 attaching NULL sched-domain.
[ 23.259244] CPU1 attaching NULL sched-domain.
[ 23.276127] CPU0 attaching sched-domain:
[ 23.276134] domain 0: span 0-1 level MC
[ 23.276139] groups: 0 1
[ 23.276148] CPU1 attaching sched-domain:
[ 23.276152] domain 0: span 0-1 level MC
[ 23.276156] groups: 1 0
[ 24.169846] [drm] DAC-6: set mode 15
[ 79.103840] wlan0: authenticate with AP 00:25:86:d0:af:f4
[ 79.105590] wlan0: authenticated
[ 79.105596] wlan0: associate with AP 00:25:86:d0:af:f4
[ 79.107952] wlan0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=1)
[ 79.107957] wlan0: associated
[ 79.113989] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 79.806722] padlock: VIA PadLock not detected.
[ 89.988515] wlan0: no IPv6 routers present