Ubuntu-gr Forum

Καλημέρα φίλοι

Στέλνω τα αποτελέσματα της εντολής ddcprobe:

Κώδικας: Επιλογή όλων

sargirio@Hermes-Server:~$ sudo ddcprobe
sudo: ddcprobe: command not found
sargirio@Hermes-Server:~$

[b]Στέλνω αποτελέσματα της εντολής parse-edid:[/b]
sargirio@Hermes-Server:~$ sudo get-edid|parse-edid
parse-edid: parse-edid version 1.4.1
get-edid: get-edid version 1.4.1

Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful

VBE version 200
VBE string at 0x11110 "ATI RADEON 9200"

VBE/DDC service about to be called
Report DDC capabilities

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful

Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
Read EDID

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful

parse-edid: EDID checksum failed - data is corrupt. Continuing anyway.

# EDID version 1 revision 3
Section "Monitor"
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
Identifier "Philips 170S4"
VendorName "PHL"
ModelName "Philips 170S4"
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
HorizSync 30-82
VertRefresh 56-76
# Max dot clock (video bandwidth) 140 MHz
# DPMS capabilities: Active off:yes Suspend:yes Standby:yes

Mode "1280x1024" # vfreq 60.020Hz, hfreq 63.981kHz
DotClock 108.000000
HTimings 1280 1328 1440 1688
VTimings 1024 1025 1028 1066
Flags "+HSync" "+VSync"
EndMode
# Block type: 2:0 3:ff
# Block type: 2:0 3:fc
# Block type: 2:0 3:fd
EndSection
sargirio@Hermes-Server:~$


Εχω κάνει ολα τα update, δεν εκανα ακομα τις αλλαγές που μου ειπατε.
Περιμένω απάντηση σας για να προχωρήσω.

Και παλι ευχαριστώ.