Δημοσιεύτηκε: 05 Μάιος 2011, 20:01
Καλησπέρα σας , μετά απο καιρό κατάφερα και έκανα την κάρτα τηλεόρασης μου να δουλέψει
Η κάρτα μου είναι pci και είναι η Pinnacle HYBRID Pro PCI . Το πρόβλημα μου είναι ότι ενω πιάνω κανάλια με το tvtime ή το vlc εν τούτοις δεν έχω ήχο !! Ενω γενικά στο σύστημα μου ο ήχος δουλεύει μια χαρά παρ'όλα αυτά δεν μπορώ να ακούσω ήχο στο tvtime ή στο vlc όταν πάω να δω τηλεόραση
Για να σας προλάβω αυτά που θα μου ζητήσετε :
1) Εχω μια κάμερα (usb logitech) και την έχω αποσυνδέσει για να δουλέψει η κάρτα τηλεόρασης έτσι ώστε να "βλέπει" το tvtime ως την κάρτα τηλεόρασης συσκευή /dev/video0 και όχι /dev/video1
2) Τα αποτελέσματα των εντολών χωρίς την κάμερα πάνω είναι τα παρακάτω :
To lspci μου δίνει :
Το dmesg :
Μήπως έχετε καμία ιδέα γιατί δεν μου παίζει ο ήχος ?
Ευχαριστώ εκ των προτέρων
Η κάρτα μου είναι pci και είναι η Pinnacle HYBRID Pro PCI . Το πρόβλημα μου είναι ότι ενω πιάνω κανάλια με το tvtime ή το vlc εν τούτοις δεν έχω ήχο !! Ενω γενικά στο σύστημα μου ο ήχος δουλεύει μια χαρά παρ'όλα αυτά δεν μπορώ να ακούσω ήχο στο tvtime ή στο vlc όταν πάω να δω τηλεόραση
Για να σας προλάβω αυτά που θα μου ζητήσετε :
1) Εχω μια κάμερα (usb logitech) και την έχω αποσυνδέσει για να δουλέψει η κάρτα τηλεόρασης έτσι ώστε να "βλέπει" το tvtime ως την κάρτα τηλεόρασης συσκευή /dev/video0 και όχι /dev/video1
2) Τα αποτελέσματα των εντολών χωρίς την κάμερα πάνω είναι τα παρακάτω :
To lspci μου δίνει :
- Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850]
01:00.1 Audio device: ATI Technologies Inc HD48x0 audio
02:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
05:02.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
05:03.0 FireWire (IEEE 1394): Agere Systems FW322/323 (rev 70)
Το dmesg :
- Κώδικας: Επιλογή όλων
es)
[ 0.240526] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.240699] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.240701] TCP reno registered
[ 0.240703] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240710] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.240771] NET: Registered protocol family 1
[ 0.240899] pci 0000:01:00.0: Boot video device
[ 0.240911] PCI: CLS 32 bytes, default 64
[ 0.241063] cpufreq-nforce2: No nForce2 chipset.
[ 0.241160] audit: initializing netlink socket (disabled)
[ 0.241166] type=2000 audit(1304499838.236:1): initialized
[ 0.247849] highmem bounce pool size: 64 pages
[ 0.247853] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.249221] VFS: Disk quotas dquot_6.5.2
[ 0.249267] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.249766] fuse init (API version 7.16)
[ 0.249834] msgmni has been set to 1678
[ 0.250011] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.250030] io scheduler noop registered
[ 0.250031] io scheduler deadline registered
[ 0.250042] io scheduler cfq registered (default)
[ 0.250132] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.250157] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.250197] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.250228] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.250275] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.250305] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.250353] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.250383] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.250448] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.250467] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.250521] intel_idle: MWAIT substates: 0x22220
[ 0.250523] intel_idle: does not run on family 6 model 23
[ 0.250599] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.250603] ACPI: Power Button [PWRB]
[ 0.250640] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.250643] ACPI: Power Button [PWRF]
[ 0.250787] ACPI: acpi_idle registered with cpuidle
[ 0.252043] ERST: Table is not found!
[ 0.252091] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.256075] isapnp: Scanning for PnP cards...
[ 0.272422] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.367926] Freeing initrd memory: 12516k freed
[ 0.608819] isapnp: No Plug & Play device found
[ 0.633596] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.633868] Linux agpgart interface v0.103
[ 0.634977] brd: module loaded
[ 0.635438] loop: module loaded
[ 0.635505] i2c-core: driver [adp5520] using legacy suspend method
[ 0.635506] i2c-core: driver [adp5520] using legacy resume method
[ 0.635589] ata_piix 0000:00:1f.2: version 2.13
[ 0.635610] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.635614] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.635649] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.635911] scsi0 : ata_piix
[ 0.635981] scsi1 : ata_piix
[ 0.637056] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.637061] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.637076] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.637080] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.637115] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.637289] scsi2 : ata_piix
[ 0.637340] scsi3 : ata_piix
[ 0.638206] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.638209] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.638258] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.638282] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.638292] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.638549] Fixed MDIO Bus: probed
[ 0.638578] PPP generic driver version 2.4.2
[ 0.638610] tun: Universal TUN/TAP device driver, 1.6
[ 0.638612] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.638674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.638689] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.638696] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.638699] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.638728] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.638763] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.642654] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.642665] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.656012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.656144] hub 1-0:1.0: USB hub found
[ 0.656148] hub 1-0:1.0: 6 ports detected
[ 0.656230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.656238] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.656240] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.656268] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.660042] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.663924] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.663934] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.676012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.676127] hub 2-0:1.0: USB hub found
[ 0.676131] hub 2-0:1.0: 6 ports detected
[ 0.676218] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.676228] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.676244] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.676249] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.676251] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.676277] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.676315] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.676401] hub 3-0:1.0: USB hub found
[ 0.676404] hub 3-0:1.0: 2 ports detected
[ 0.676458] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.676463] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.676465] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.676498] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.676534] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.676629] hub 4-0:1.0: USB hub found
[ 0.676632] hub 4-0:1.0: 2 ports detected
[ 0.676686] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.676690] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.676692] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.676718] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.680037] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.680168] hub 5-0:1.0: USB hub found
[ 0.680172] hub 5-0:1.0: 2 ports detected
[ 0.680233] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.680238] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.680240] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.680268] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.680297] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.680389] hub 6-0:1.0: USB hub found
[ 0.680391] hub 6-0:1.0: 2 ports detected
[ 0.680445] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.680449] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.680451] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.680482] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.680512] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.680601] hub 7-0:1.0: USB hub found
[ 0.680603] hub 7-0:1.0: 2 ports detected
[ 0.680657] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.680663] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.680665] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.680692] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.680720] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.680811] hub 8-0:1.0: USB hub found
[ 0.680813] hub 8-0:1.0: 2 ports detected
[ 0.680917] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.683692] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.683697] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.683789] mousedev: PS/2 mouse device common for all mice
[ 0.683890] rtc_cmos 00:03: RTC can wake from S4
[ 0.684066] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.684088] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.684176] device-mapper: uevent: version 1.0.3
[ 0.684264] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.684316] device-mapper: multipath: version 1.2.0 loaded
[ 0.684320] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.684375] EISA: Probing bus 0 at eisa.0
[ 0.684377] EISA: Cannot allocate resource for mainboard
[ 0.684378] Cannot allocate resource for EISA slot 1
[ 0.684379] Cannot allocate resource for EISA slot 2
[ 0.684381] Cannot allocate resource for EISA slot 3
[ 0.684382] Cannot allocate resource for EISA slot 4
[ 0.684383] Cannot allocate resource for EISA slot 5
[ 0.684385] Cannot allocate resource for EISA slot 6
[ 0.684386] Cannot allocate resource for EISA slot 7
[ 0.684387] Cannot allocate resource for EISA slot 8
[ 0.684389] EISA: Detected 0 cards.
[ 0.684426] cpuidle: using governor ladder
[ 0.684428] cpuidle: using governor menu
[ 0.684642] TCP cubic registered
[ 0.684739] NET: Registered protocol family 10
[ 0.685185] NET: Registered protocol family 17
[ 0.685196] Registering the dns_resolver key type
[ 0.685223] Using IPI No-Shortcut mode
[ 0.685291] PM: Hibernation image not present or could not be loaded.
[ 0.685300] registered taskstats version 1
[ 0.685550] Magic number: 11:757:69
[ 0.685607] rtc_cmos 00:03: setting system clock to 2011-05-04 09:03:59 UTC (1304499839)
[ 0.685609] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.685610] EDD information not available.
[ 0.966520] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.977042] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 0.977044] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.220014] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.240013] Refined TSC clocksource calibration: 2999.658 MHz.
[ 1.240017] Switching to clocksource tsc
[ 1.432054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.432065] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.432181] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.432192] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.432200] ata2.01: link offline, clearing class 3 to NONE
[ 1.440192] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 1.440194] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.440251] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[ 1.456190] ata1.00: configured for UDMA/133
[ 1.456197] ata2.00: configured for UDMA/100
[ 1.456284] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 1.456383] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.456391] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.456422] sd 0:0:0:0: [sda] Write Protect is off
[ 1.456424] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.456442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464753] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
[ 1.473177] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.473180] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.473280] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.473342] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.474813] sda: sda1 sda2 sda3
[ 1.475019] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.475045] Freeing unused kernel memory: 700k freed
[ 1.475247] Write protecting the kernel text: 5192k
[ 1.475278] Write protecting the kernel read-only data: 2148k
[ 1.491292] <30>udev[71]: starting version 167
[ 1.546716] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.546726] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.573639] usbcore: registered new interface driver uas
[ 1.583372] ahci 0000:03:00.0: version 3.0
[ 1.584975] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.584999] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.585294] Initializing USB Mass Storage driver...
[ 1.585333] scsi4 : pata_marvell
[ 1.585386] scsi6 : pata_marvell
[ 1.585422] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.585423] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 1.585604] scsi5 : usb-storage 1-1:1.0
[ 1.587810] scsi7 : usb-storage 2-2:1.0
[ 1.587867] usbcore: registered new interface driver usb-storage
[ 1.587868] USB Mass Storage support registered.
[ 1.708011] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 1.915792] usbcore: registered new interface driver usbhid
[ 1.915848] usbhid: USB HID core driver
[ 1.916558] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.940094] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[ 1.940191] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
[ 1.956456] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.972064] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.027555] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 2.077714] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[ 2.077807] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
[ 2.132010] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 2.351850] generic-usb 0003:0665:5161.0003: hiddev0,hidraw2: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.2-1/input0
[ 2.472076] firewire_core: created device fw0: GUID 001e8c00015fd8da, S400
[ 2.584995] scsi 5:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
[ 2.585744] scsi 5:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
[ 2.586492] scsi 5:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[ 2.586830] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 2.587605] sd 5:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[ 2.589104] sr1: scsi3-mmc drive: 51x/51x caddy
[ 2.589233] sr 5:0:0:1: Attached scsi CD-ROM sr1
[ 2.589305] sr 5:0:0:1: Attached scsi generic sg3 type 5
[ 2.589436] scsi 5:0:0:2: Attached scsi generic sg4 type 13
[ 2.590851] sd 5:0:0:0: [sdb] Write Protect is off
[ 2.590855] sd 5:0:0:0: [sdb] Mode Sense: 23 00 10 00
[ 2.594977] sd 5:0:0:0: [sdb] No Caching mode page present
[ 2.594980] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2.600603] sd 5:0:0:0: [sdb] No Caching mode page present
[ 2.600606] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2.601164] sdb: sdb1
[ 2.606851] sd 5:0:0:0: [sdb] No Caching mode page present
[ 2.606854] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 2.606857] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 2.619641] scsi 7:0:0:0: Direct-Access WD 2500JB External 0107 PQ: 0 ANSI: 0
[ 2.619967] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 2.620626] sd 7:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 2.621373] sd 7:0:0:0: [sdc] Write Protect is off
[ 2.621376] sd 7:0:0:0: [sdc] Mode Sense: 03 00 00 00
[ 2.622123] sd 7:0:0:0: [sdc] No Caching mode page present
[ 2.622125] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.624498] sd 7:0:0:0: [sdc] No Caching mode page present
[ 2.624501] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.625180] sdc: sdc1
[ 2.627373] sd 7:0:0:0: [sdc] No Caching mode page present
[ 2.627375] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 2.627378] sd 7:0:0:0: [sdc] Attached SCSI disk
[ 3.414408] Adding 2395132k swap on /dev/sda2. Priority:-1 extents:1 across:2395132k
[ 3.635859] <30>udev[301]: starting version 167
[ 4.782727] [drm] Initialized drm 1.1.0 20060810
[ 4.825346] Linux video capture interface: v2.00
[ 4.875109] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 4.875145] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 4.875150] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[ 4.875155] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[ 4.875166] saa7133[0]: board init: gpio is 600e000
[ 5.024008] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 5.024020] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[ 5.024030] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[ 5.024041] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[ 5.024051] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024061] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024072] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024082] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024092] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024103] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024113] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024123] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024134] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024144] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024154] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.024164] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 5.039125] ses 5:0:0:2: Attached Enclosure device
[ 5.071615] IR NEC protocol handler initialized
[ 5.111725] i2c-core: driver [tuner] using legacy suspend method
[ 5.111727] i2c-core: driver [tuner] using legacy resume method
[ 5.185570] IR RC5(x) protocol handler initialized
[ 5.220023] lp: driver loaded but no devices found
[ 5.277029] IR RC6 protocol handler initialized
[ 5.292098] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 5.315215] IR JVC protocol handler initialized
[ 5.334031] IR Sony protocol handler initialized
[ 5.365758] lirc_dev: IR Remote Control driver registered, major 249
[ 5.367385] IR LIRC bridge handler initialized
[ 5.372010] tda829x 0-004b: setting tuner address to 61
[ 5.423915] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 5.424106] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 5.424126] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 5.436620] type=1400 audit(1304499844.246:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=453 comm="apparmor_parser"
[ 5.437245] type=1400 audit(1304499844.246:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=453 comm="apparmor_parser"
[ 5.437642] type=1400 audit(1304499844.246:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=453 comm="apparmor_parser"
[ 5.438170] [drm] radeon defaulting to kernel modesetting.
[ 5.438172] [drm] radeon kernel modesetting enabled.
[ 5.438209] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.438213] radeon 0000:01:00.0: setting latency timer to 64
[ 5.438249] type=1400 audit(1304499844.246:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=474 comm="apparmor_parser"
[ 5.438877] type=1400 audit(1304499844.246:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=474 comm="apparmor_parser"
[ 5.439030] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[ 5.439046] [drm] register mmio base: 0xFE8E0000
[ 5.439047] [drm] register mmio size: 65536
[ 5.439130] ATOM BIOS: Wekiva
[ 5.439144] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 5.439147] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 5.440447] [drm] Detected VRAM RAM=512M, BAR=256M
[ 5.440450] [drm] RAM width 256bits DDR
[ 5.440501] [TTM] Zone kernel: Available graphics memory: 436254 kiB.
[ 5.440503] [TTM] Zone highmem: Available graphics memory: 1029890 kiB.
[ 5.440504] [TTM] Initializing pool allocator.
[ 5.440519] [drm] radeon: 512M of VRAM memory ready
[ 5.440521] [drm] radeon: 512M of GTT memory ready.
[ 5.440540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.440542] [drm] Driver supports precise vblank timestamp query.
[ 5.440581] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 5.440586] radeon 0000:01:00.0: radeon: using MSI.
[ 5.440610] type=1400 audit(1304499844.254:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=474 comm="apparmor_parser"
[ 5.440611] [drm] radeon: irq initialized.
[ 5.440614] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 5.441633] [drm] Loading RV770 Microcode
[ 5.452243] tda829x 0-004b: type set to tda8290+75a
[ 5.777412] radeon 0000:01:00.0: WB enabled
[ 5.823381] [drm] ring test succeeded in 1 usecs
[ 5.823488] [drm] radeon: ib pool ready.
[ 5.823548] [drm] ib test succeeded in 0 usecs
[ 5.823550] [drm] Enabling audio support
[ 5.823557] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 5.824828] [drm] Radeon Display Connectors
[ 5.824830] [drm] Connector 0:
[ 5.824831] [drm] DVI-I
[ 5.824832] [drm] HPD1
[ 5.824833] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 5.824835] [drm] Encoders:
[ 5.824836] [drm] DFP1: INTERNAL_UNIPHY
[ 5.824837] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 5.824838] [drm] Connector 1:
[ 5.824839] [drm] DIN
[ 5.824840] [drm] Encoders:
[ 5.824841] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 5.824842] [drm] Connector 2:
[ 5.824843] [drm] DVI-I
[ 5.824844] [drm] HPD2
[ 5.824845] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 5.824847] [drm] Encoders:
[ 5.824848] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 5.824849] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 5.878659] [drm] Internal thermal controller with fan control
[ 5.878715] [drm] radeon: power management initialized
[ 5.965864] [drm] fb mappable at 0xD0142000
[ 5.965866] [drm] vram apper at 0xD0000000
[ 5.965867] [drm] size 7299072
[ 5.965868] [drm] fb depth is 24
[ 5.965869] [drm] pitch is 6912
[ 5.966096] Console: switching to colour frame buffer device 210x65
[ 5.966128] fb0: radeondrmfb frame buffer device
[ 5.966129] drm: registered panic notifier
[ 5.966134] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[ 5.966167] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.966209] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 5.966227] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.179639] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 9.320125] saa7133[0]: registered device video0 [v4l2]
[ 9.320192] saa7133[0]: registered device vbi0
[ 9.320256] saa7133[0]: registered device radio0
[ 9.373762] dvb_init() allocating 1 frontend
[ 9.374974] saa7134 ALSA driver for DMA sound loaded
[ 9.374995] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[ 9.392092] DVB: registering new adapter (saa7133[0])
[ 9.392096] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 9.888016] tda1004x: setting up plls for 48MHz sampling clock
[ 12.148005] tda1004x: timeout waiting for DSP ready
[ 12.188006] tda1004x: found firmware revision 0 -- invalid
[ 12.188009] tda1004x: trying to boot from eeprom
[ 13.244004] tda1004x: found firmware revision 0 -- invalid
[ 13.244006] tda1004x: waiting for firmware upload...
[ 13.247159] tda1004x: no firmware upload (timeout or file not found?)
[ 13.247161] tda1004x: firmware upload failed
[ 21.930748] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 22.587251] type=1400 audit(1304499861.394:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=842 comm="apparmor_parser"
[ 22.587889] type=1400 audit(1304499861.394:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=842 comm="apparmor_parser"
[ 22.588306] type=1400 audit(1304499861.398:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=842 comm="apparmor_parser"
[ 22.664464] type=1400 audit(1304499861.474:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=841 comm="apparmor_parser"
[ 22.738004] ppdev: user-space parallel port driver
[ 22.746612] type=1400 audit(1304499861.554:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=847 comm="apparmor_parser"
[ 22.747334] type=1400 audit(1304499861.554:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=847 comm="apparmor_parser"
[ 22.768962] type=1400 audit(1304499861.578:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=851 comm="apparmor_parser"
[ 22.772487] type=1400 audit(1304499861.582:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=860 comm="apparmor_parser"
[ 22.773219] type=1400 audit(1304499861.582:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=860 comm="apparmor_parser"
[ 22.858476] type=1400 audit(1304499861.666:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=843 comm="apparmor_parser"
[ 23.608601] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[ 23.608726] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 23.608786] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.608892] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 26.970677] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.098011] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 31.046820] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 31.049031] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 31.480310] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 34.608004] eth0: no IPv6 routers present
[ 57.438500] UDF-fs: Partition marked readonly; forcing readonly mount
[ 57.440245] UDF-fs INFO UDF: Mounting volume 'WD SmartWare', timestamp 2009/11/14 03:34 (10b4)
Μήπως έχετε καμία ιδέα γιατί δεν μου παίζει ο ήχος ?
Ευχαριστώ εκ των προτέρων