Δημοσιεύτηκε: 02 Ιουν 2011, 08:19
Εβαλα την εκδοση 11.04 στο laptop της υπογραφης μου και να τα αποτελεσματα των εντολων :
Μπορει καποιος να μου πει εαν με την εκδοση 11.04 λειτουργει καλα ο επεξεργαστης με την ενσωματωμενη καρτα γραφικων ;
Τι να κανω ;
- Κώδικας: Επιλογή όλων
lspci
- Κώδικας: Επιλογή όλων
john@laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
06:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05)
john@laptop:~$
- Κώδικας: Επιλογή όλων
dmesg
- Κώδικας: Επιλογή όλων
[ 1.077849] system 00:04: [io 0x0500-0x057f] has been reserved
[ 1.077851] system 00:04: [io 0xfe00] has been reserved
[ 1.077853] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 1.077856] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.077864] pnp 00:05: [io 0x0070-0x0077]
[ 1.077869] pnp 00:05: [irq 8]
[ 1.077900] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.094808] pnp 00:06: [io 0x0060]
[ 1.094813] pnp 00:06: [io 0x0064]
[ 1.094825] pnp 00:06: [irq 1]
[ 1.094880] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.094891] pnp 00:07: [irq 12]
[ 1.094924] pnp 00:07: Plug and Play ACPI device, IDs TOS0100 SYN0700 SYN0002 PNP0f13 (active)
[ 1.095224] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 1.095226] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 1.095228] pnp 00:08: [mem 0xfed16000-0xfed16fff]
[ 1.095230] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 1.095232] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 1.095234] pnp 00:08: [mem 0x00000000-0x00000fff]
[ 1.095235] pnp 00:08: [mem 0x7c000000-0x7c000fff]
[ 1.095237] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 1.095239] pnp 00:08: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.095241] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 1.095244] pnp 00:08: [mem 0xff000000-0xffffffff]
[ 1.095246] pnp 00:08: [mem 0xfee00000-0xfeefffff]
[ 1.095247] pnp 00:08: [mem 0x00000000-0x00000fff]
[ 1.095317] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.095320] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.095322] system 00:08: [mem 0xfed16000-0xfed16fff] has been reserved
[ 1.095324] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.095326] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.095329] system 00:08: [mem 0x00000000-0x00000fff] could not be reserved
[ 1.095331] system 00:08: [mem 0x7c000000-0x7c000fff] has been reserved
[ 1.095333] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.095335] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.095338] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.095340] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.095342] system 00:08: [mem 0x00000000-0x00000fff] could not be reserved
[ 1.095345] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.095581] pnp 00:09: [bus ff]
[ 1.095636] pnp 00:09: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.095646] pnp: PnP ACPI: found 10 devices
[ 1.095647] ACPI: ACPI bus type pnp unregistered
[ 1.095650] PnPBIOS: Disabled by ACPI PNP
[ 1.131660] pci 0000:00:1c.0: PCI bridge to [bus 01-05]
[ 1.131664] pci 0000:00:1c.0: bridge window [io 0x4000-0x5fff]
[ 1.131670] pci 0000:00:1c.0: bridge window [mem 0x91e00000-0x925fffff]
[ 1.131675] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x90cfffff 64bit pref]
[ 1.131683] pci 0000:00:1c.1: PCI bridge to [bus 06-0a]
[ 1.131686] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff]
[ 1.131693] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x91dfffff]
[ 1.131698] pci 0000:00:1c.1: bridge window [mem 0x90d00000-0x914fffff 64bit pref]
[ 1.131705] pci 0000:00:1e.0: PCI bridge to [bus 0b-0b]
[ 1.131707] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.131712] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.131717] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.131739] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.131744] pci 0000:00:1c.0: setting latency timer to 64
[ 1.131756] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.131760] pci 0000:00:1c.1: setting latency timer to 64
[ 1.131769] pci 0000:00:1e.0: setting latency timer to 64
[ 1.131773] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.131775] pci_bus 0000:00: resource 5 [io 0x0d00-0xfdff]
[ 1.131777] pci_bus 0000:00: resource 6 [io 0xff28-0xff2b]
[ 1.131779] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.131781] pci_bus 0000:00: resource 8 [mem 0x77800000-0xfeafffff]
[ 1.131783] pci_bus 0000:01: resource 0 [io 0x4000-0x5fff]
[ 1.131785] pci_bus 0000:01: resource 1 [mem 0x91e00000-0x925fffff]
[ 1.131787] pci_bus 0000:01: resource 2 [mem 0x90400000-0x90cfffff 64bit pref]
[ 1.131789] pci_bus 0000:06: resource 0 [io 0x2000-0x3fff]
[ 1.131791] pci_bus 0000:06: resource 1 [mem 0x91500000-0x91dfffff]
[ 1.131793] pci_bus 0000:06: resource 2 [mem 0x90d00000-0x914fffff 64bit pref]
[ 1.131795] pci_bus 0000:0b: resource 4 [io 0x0000-0x0cf7]
[ 1.131797] pci_bus 0000:0b: resource 5 [io 0x0d00-0xfdff]
[ 1.131799] pci_bus 0000:0b: resource 6 [io 0xff28-0xff2b]
[ 1.131801] pci_bus 0000:0b: resource 7 [mem 0x000a0000-0x000bffff]
[ 1.131803] pci_bus 0000:0b: resource 8 [mem 0x77800000-0xfeafffff]
[ 1.131832] NET: Registered protocol family 2
[ 1.131896] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.132101] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.132429] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.132579] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.132582] TCP reno registered
[ 1.132584] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.132591] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.132673] NET: Registered protocol family 1
[ 1.132685] pci 0000:00:02.0: Boot video device
[ 1.162716] PCI: CLS 0 bytes, default 64
[ 1.163046] cpufreq-nforce2: No nForce2 chipset.
[ 1.163206] audit: initializing netlink socket (disabled)
[ 1.163214] type=2000 audit(1306991256.708:1): initialized
[ 1.171620] highmem bounce pool size: 64 pages
[ 1.171625] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.173147] VFS: Disk quotas dquot_6.5.2
[ 1.173197] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.173757] fuse init (API version 7.16)
[ 1.173837] msgmni has been set to 1705
[ 1.174058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.174087] io scheduler noop registered
[ 1.174089] io scheduler deadline registered
[ 1.174102] io scheduler cfq registered (default)
[ 1.174327] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.174350] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.174396] intel_idle: MWAIT substates: 0x1120
[ 1.174397] intel_idle: v0.4 model 0x25
[ 1.174399] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.582073] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.993319] ACPI: AC Adapter [ACAD] (on-line)
[ 1.993420] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.993477] ACPI: Lid Switch [LID0]
[ 1.993518] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.993522] ACPI: Power Button [PWRB]
[ 1.993561] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.993564] ACPI: Power Button [PWRF]
[ 1.993779] ACPI: acpi_idle yielding to intel_idle
[ 2.014257] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 2.014310] ERST: Table is not found!
[ 2.014369] isapnp: Scanning for PnP cards...
[ 2.014371] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.033161] ACPI: Battery Slot [BAT1] (battery absent)
[ 2.160957] Refined TSC clocksource calibration: 2393.999 MHz.
[ 2.160961] Switching to clocksource tsc
[ 2.355153] isapnp: No Plug & Play device found
[ 2.358040] Linux agpgart interface v0.103
[ 2.358128] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 2.358204] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.358954] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 2.359091] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 2.360167] brd: module loaded
[ 2.360682] loop: module loaded
[ 2.360780] i2c-core: driver [adp5520] using legacy suspend method
[ 2.360782] i2c-core: driver [adp5520] using legacy resume method
[ 2.361205] Fixed MDIO Bus: probed
[ 2.361242] PPP generic driver version 2.4.2
[ 2.361276] tun: Universal TUN/TAP device driver, 1.6
[ 2.361278] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.361347] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.361367] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.361383] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.361387] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.361417] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.361476] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.365371] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.365391] ehci_hcd 0000:00:1a.0: irq 16, io mem 0x92608000
[ 2.380546] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.380704] hub 1-0:1.0: USB hub found
[ 2.380708] hub 1-0:1.0: 2 ports detected
[ 2.380774] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.380786] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.380789] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.380823] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.380867] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.384745] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.384759] ehci_hcd 0000:00:1d.0: irq 23, io mem 0x92607000
[ 2.400511] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.400656] hub 2-0:1.0: USB hub found
[ 2.400659] hub 2-0:1.0: 2 ports detected
[ 2.400714] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.400726] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.400794] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.416789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.416795] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.416901] mousedev: PS/2 mouse device common for all mice
[ 2.417249] rtc_cmos 00:05: RTC can wake from S4
[ 2.417302] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.417332] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.417401] device-mapper: uevent: version 1.0.3
[ 2.417467] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 2.417530] device-mapper: multipath: version 1.2.0 loaded
[ 2.417532] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.417589] EISA: Probing bus 0 at eisa.0
[ 2.417592] EISA: Cannot allocate resource for mainboard
[ 2.417594] Cannot allocate resource for EISA slot 1
[ 2.417596] Cannot allocate resource for EISA slot 2
[ 2.417597] Cannot allocate resource for EISA slot 3
[ 2.417599] Cannot allocate resource for EISA slot 4
[ 2.417601] Cannot allocate resource for EISA slot 5
[ 2.417603] Cannot allocate resource for EISA slot 6
[ 2.417604] Cannot allocate resource for EISA slot 7
[ 2.417606] Cannot allocate resource for EISA slot 8
[ 2.417607] EISA: Detected 0 cards.
[ 2.417756] cpuidle: using governor ladder
[ 2.417941] cpuidle: using governor menu
[ 2.418154] TCP cubic registered
[ 2.418261] NET: Registered protocol family 10
[ 2.418724] NET: Registered protocol family 17
[ 2.418738] Registering the dns_resolver key type
[ 2.419893] Using IPI No-Shortcut mode
[ 2.419971] PM: Hibernation image not present or could not be loaded.
[ 2.419980] registered taskstats version 1
[ 2.420249] Magic number: 15:739:111
[ 2.420355] rtc_cmos 00:05: setting system clock to 2011-06-02 05:07:39 UTC (1306991259)
[ 2.420358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.420359] EDD information not available.
[ 2.420512] Freeing unused kernel memory: 700k freed
[ 2.420718] Write protecting the kernel text: 5192k
[ 2.420810] Write protecting the kernel read-only data: 2148k
[ 2.435999] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.446527] <30>udev[74]: starting version 167
[ 2.696071] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 2.828615] hub 1-1:1.0: USB hub found
[ 2.828832] hub 1-1:1.0: 6 ports detected
[ 2.939712] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 3.072074] hub 2-1:1.0: USB hub found
[ 3.072291] hub 2-1:1.0: 8 ports detected
[ 3.143413] usb 1-1.3: new high speed USB device using ehci_hcd and address 3
[ 3.323099] usb 1-1.4: new high speed USB device using ehci_hcd and address 4
[ 3.518773] usb 2-1.1: new full speed USB device using ehci_hcd and address 3
[ 3.657122] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.657152] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.657199] r8169 0000:01:00.0: setting latency timer to 64
[ 3.657206] r8169 0000:01:00.0: (unregistered net_device): unknown MAC, using family default
[ 3.657269] r8169 0000:01:00.0: irq 40 for MSI/MSI-X
[ 3.657885] r8169 0000:01:00.0: eth0: RTL8101e at 0xf8044000, 88:ae:1d:f2:10:d0, XID 00900000 IRQ 40
[ 3.660872] ahci 0000:00:1f.2: version 3.0
[ 3.660892] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.660933] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.660980] ahci: SSS flag set, parallel bus scan disabled
[ 3.661021] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x32 impl SATA mode
[ 3.661025] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst
[ 3.661029] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.675127] scsi0 : ahci
[ 3.675460] scsi1 : ahci
[ 3.675722] scsi2 : ahci
[ 3.676465] scsi3 : ahci
[ 3.676691] scsi4 : ahci
[ 3.676822] scsi5 : ahci
[ 3.677193] ata1: DUMMY
[ 3.677199] ata2: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608980 irq 41
[ 3.677201] ata3: DUMMY
[ 3.677203] ata4: DUMMY
[ 3.677207] ata5: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608b00 irq 41
[ 3.677212] ata6: SATA max UDMA/133 abar m2048@0x92608800 port 0x92608b80 irq 41
[ 3.683875] usbcore: registered new interface driver uas
[ 3.703990] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[ 3.704119] generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input0
[ 3.707132] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
[ 3.707323] generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1/input1
[ 3.707343] usbcore: registered new interface driver usbhid
[ 3.707345] usbhid: USB HID core driver
[ 3.993848] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.995041] ata2.00: ATA-8: Hitachi HTS545032B9A300, PB3OC64G, max UDMA/133
[ 3.995046] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.996437] ata2.00: configured for UDMA/133
[ 3.996631] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54503 PB3O PQ: 0 ANSI: 5
[ 3.996857] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 3.996905] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.997016] sd 1:0:0:0: [sda] Write Protect is off
[ 3.997019] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.997060] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.044985] sda: sda1 sda2 < sda5 >
[ 4.045378] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.716600] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.719229] ata5.00: ATAPI: HL-DT-STDVDRAM GT30N, TN08, max UDMA/100
[ 4.722309] ata5.00: configured for UDMA/100
[ 4.725351] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N TN08 PQ: 0 ANSI: 5
[ 4.729459] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.729464] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 4.729597] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.729650] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 5.048027] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.054992] Initializing USB Mass Storage driver...
[ 5.055119] scsi6 : usb-storage 1-1.3:1.0
[ 5.055257] usbcore: registered new interface driver usb-storage
[ 5.055260] USB Mass Storage support registered.
[ 6.053609] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.055728] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 6.061265] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 6.167425] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.997388] <30>udev[297]: starting version 167
[ 16.014972] lp: driver loaded but no devices found
[ 16.084884] Adding 1951740k swap on /dev/sda5. Priority:-1 extents:1 across:1951740k
[ 16.865322] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.012937] type=1400 audit(1306991274.113:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=429 comm="apparmor_parser"
[ 17.013718] type=1400 audit(1306991274.113:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=429 comm="apparmor_parser"
[ 17.014229] type=1400 audit(1306991274.113:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=429 comm="apparmor_parser"
[ 17.084104] r8169 0000:01:00.0: eth0: link down
[ 17.084111] r8169 0000:01:00.0: eth0: link down
[ 17.084295] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.286379] [drm] Initialized drm 1.1.0 20060810
[ 17.332045] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 17.332075] intel ips 0000:00:1f.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 17.332250] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled
[ 17.332652] cfg80211: Calling CRDA to update world regulatory domain
[ 17.332809] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 17.360730] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.360736] i915 0000:00:02.0: setting latency timer to 64
[ 17.399120] Linux video capture interface: v2.00
[ 17.427660] i915 0000:00:02.0: irq 42 for MSI/MSI-X
[ 17.427667] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.427670] [drm] Driver supports precise vblank timestamp query.
[ 17.452231] uvcvideo: Found UVC 1.00 device CNF9055 (04f2:b1d6)
[ 17.462111] rtl8192ce 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 17.462121] rtl8192ce 0000:06:00.0: setting latency timer to 64
[ 17.467386] input: CNF9055 as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6
[ 17.467547] usbcore: registered new interface driver uvcvideo
[ 17.467550] USB Video Class driver (v1.0.0)
[ 17.472413] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472417] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472419] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472421] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472423] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472425] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472427] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472430] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472432] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472434] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472436] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472438] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472440] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472442] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472444] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472446] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472448] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472450] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472452] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472454] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472456] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472458] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472460] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472463] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472464] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.472467] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.472468] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.472477] cfg80211: Pending regulatory request, waiting for it to be processed...
[ 17.472680] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.487164] type=1400 audit(1306991274.589:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=663 comm="apparmor_parser"
[ 17.491023] type=1400 audit(1306991274.593:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
[ 17.491546] type=1400 audit(1306991274.593:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=668 comm="apparmor_parser"
[ 17.491680] type=1400 audit(1306991274.593:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
[ 17.492093] type=1400 audit(1306991274.593:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
[ 17.502097] type=1400 audit(1306991274.601:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=665 comm="apparmor_parser"
[ 17.508898] type=1400 audit(1306991274.609:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=667 comm="apparmor_parser"
[ 17.528181] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 17.528977] rtlwifi: wireless switch is off
[ 17.562619] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 17.580621] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 17.580629] cfg80211: World regulatory domain updated:
[ 17.580631] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.580634] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.580637] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.580640] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 17.580644] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.580647] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 17.580660] cfg80211: Calling CRDA for country: EC
[ 17.585798] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585804] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585807] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585810] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585813] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585817] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585819] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585823] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585826] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585829] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585832] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585835] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585838] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585841] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585844] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585848] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585850] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585854] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585857] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585860] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585863] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585866] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585869] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585872] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585875] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.585879] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.585881] cfg80211: Disabling freq 2484 MHz
[ 17.585885] cfg80211: Regulatory domain changed to country: EC
[ 17.585887] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.585891] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.585894] cfg80211: (5170000 KHz - 5250000 KHz @ 20000 KHz), (300 mBi, 1700 mBm)
[ 17.585897] cfg80211: (5250000 KHz - 5330000 KHz @ 20000 KHz), (300 mBi, 2300 mBm)
[ 17.585900] cfg80211: (5735000 KHz - 5835000 KHz @ 20000 KHz), (300 mBi, 3000 mBm)
[ 17.632646] Console: switching to colour frame buffer device 170x48
[ 17.632679] fb0: inteldrmfb frame buffer device
[ 17.632681] drm: registered panic notifier
[ 17.637019] acpi device:0e: registered as cooling_device4
[ 17.637817] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:02/input/input7
[ 17.637926] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.638391] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 17.638936] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.639006] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 17.639043] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 17.687296] hda_codec: ALC259: BIOS auto-probing.
[ 17.697830] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.698090] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.950518] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.501885] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 18.501908] synaptics: Toshiba Satellite C660 detected, limiting rate to 40pps.
[ 18.577448] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 18.662947] r8169 0000:01:00.0: eth0: link up
[ 18.663368] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.872886] ppdev: user-space parallel port driver
[ 19.337469] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 22.546971] intel ips 0000:00:1f.6: i915 driver attached, reenabling gpu turbo
[ 22.762762] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 29.497799] eth0: no IPv6 routers present
john@laptop:~$
Μπορει καποιος να μου πει εαν με την εκδοση 11.04 λειτουργει καλα ο επεξεργαστης με την ενσωματωμενη καρτα γραφικων ;
Τι να κανω ;