Ubuntu-gr Forum

Ξέχασα να πω πως όποια ανάλυση και αν αλλάξω δεν υπάρχει καμία αλλαγή, είναι σαν να βλέπει το σύστημα το monitor 21 ιντσών αντί 22,5 που είναι.

Κώδικας: Επιλογή όλων


Screen 0: minimum 320 x 200, current 1776 x 1000, maximum 1920 x 1920
DFP1 connected 1776x1000+0+0 (normal left inverted right x axis y axis) 477mm x 268mm
1920x1080 60.0 + 50.0 59.9 30.0 25.0 30.0
1600x1200 60.0
1776x1000 50.0 59.9* 25.0 30.0
1680x1050 50.0 60.0
1400x1050 60.0 50.0
1600x900 60.0 50.0
1280x1024 50.0 75.0 60.0
1440x900 50.0 75.0 59.9
1280x960 50.0 60.0
1280x800 50.0 59.8
1152x864 50.0 59.9 75.0
1280x768 50.0 59.8
1280x720 60.0 50.0 59.9
1024x768 50.0 75.0 70.1 60.0
1152x648 50.0 59.9
800x600 50.0 72.2 75.0 60.3 56.2
720x576 59.9 50.0
720x480 50.0 60.0 59.9
640x480 50.0 75.0 72.8 67.0 59.9
DFP2 disconnected (normal left inverted right x axis y axis)
CRT1 disconnected (normal left inverted right x axis y axis)
CRT2 disconnected (normal left inverted right x axis y axis)


dmesg: http://pastebin.ubuntu-gr.org/m5995e0a9

Xorg.0.log: http://pastebin.ubuntu-gr.org/f1474858

xorg.conf

Κώδικας: Επιλογή όλων


Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection


Κώδικας: Επιλογή όλων

sudo get-edid | edid-decode
get-edid: get-edid version 2.0.0

Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful

VBE version 300
VBE string at 0xc0214 "ATI ATOMBIOS"

VBE/DDC service about to be called
Report DDC capabilities

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful

Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
Read EDID

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful

EDID claims 1 more blocks left


*********** Something special has happened!
Please contact the author, Matthew Kern
E-mail: pyrophobicman@gmail.com
Please include full output from this program (especially that to stderr)



Reading next EDID block

VBE/DDC service about to be called
Read EDID

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful

EDID claims 1 more blocks left
EDID blocks left is wrong.
Your EDID is probably invalid.
Extracted contents:
header: 00 ff ff ff ff ff ff 00
serial number: 4c 2d d2 07 38 34 30 30 22 15
version: 01 03
basic params: 80 30 1b 78 2a
chroma info: 90 c1 a2 59 55 9c 27 0e 50 54
established: bf ef 80
standard: 71 4f 81 00 81 40 81 80 95 00 95 0f a9 40 b3 00
descriptor 1: 02 3a 80 18 71 38 2d 40 58 2c 45 00 dd 0c 11 00 00 1e
descriptor 2: 01 1d 00 72 51 d0 1e 20 6e 28 55 00 dd 0c 11 00 00 1e
descriptor 3: 00 00 00 fd 00 32 4b 1f 51 11 00 0a 20 20 20 20 20 20
descriptor 4: 00 00 00 fc 00 53 4d 53 32 32 41 33 35 30 48 0a 20 20
extensions: 01
checksum: e3

Manufacturer: SAM Model 7d2 Serial Number 808465464
Made week 34 of 2011
EDID version: 1.3
Digital display
Maximum image size: 48 cm x 27 cm
Gamma: 2.20
DPMS levels: Off
Supported color formats: RGB 4:4:4, YCrCb 4:2:2
First detailed timing is preferred timing
Established timings supported:
720x400@70Hz
640x480@60Hz
640x480@67Hz
640x480@72Hz
640x480@75Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1280x1024@75Hz
1152x870@75Hz
Standard timings supported:
1152x864@75Hz
1280x800@60Hz
1280x960@60Hz
1280x1024@60Hz
1440x900@60Hz
1440x900@75Hz
1600x1200@60Hz
1680x1050@60Hz
Detailed mode: Clock 148.500 MHz, 477 mm x 268 mm
1920 2008 2052 2200 hborder 0
1080 1084 1089 1125 vborder 0
+hsync +vsync
Detailed mode: Clock 74.250 MHz, 477 mm x 268 mm
1280 1390 1430 1650 hborder 0
720 725 730 750 vborder 0
+hsync +vsync
Monitor ranges: 50-75HZ vertical, 31-81kHz horizontal, max dotclock 170MHz
Monitor name: SMS22A350H
Has 1 extension blocks
Checksum: 0xe3

Unknown extension block