Ubuntu-gr Forum

(μετά απο restart με το xorg.conf καθαρό από πειραματισμούς)

xrandr

Κώδικας: Επιλογή όλων

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1280 x 768, maximum 1280 x 768
default connected 1280x768+0+0 0mm x 0mm
1280x768 50.0*
1280x720 51.0 52.0 53.0
1152x648 54.0
1024x768 55.0 56.0 57.0 58.0 59.0 60.0
1024x576 61.0
960x720 62.0
960x600 63.0
960x540 64.0
928x696 65.0
896x672 66.0 67.0
840x525 68.0 69.0 70.0 71.0 72.0
832x624 73.0
800x600 74.0 75.0 76.0 77.0 78.0 79.0 80.0 81.0 82.0 83.0
800x512 84.0
800x450 85.0
720x576 86.0
720x480 87.0
720x450 88.0
720x400 89.0
700x525 90.0 91.0 92.0 93.0
680x384 94.0 95.0
640x512 96.0 97.0 98.0
640x480 99.0 100.0 101.0 102.0 103.0 104.0 105.0 106.0
640x400 107.0
640x360 108.0
640x350 109.0
576x432 110.0 111.0 112.0 113.0 114.0 115.0 116.0
512x384 117.0 118.0 119.0 120.0 121.0
416x312 122.0
400x300 123.0 124.0 125.0 126.0 127.0
360x200 128.0
320x240 129.0 130.0 131.0 132.0
320x200 133.0
320x175 134.0

get-edid | edid-decode

Κώδικας: Επιλογή όλων

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# get-edid | edid-decode
get-edid: get-edid version 2.0.0

Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful

VBE version 300
VBE string at 0x2110 "NVIDIA"

VBE/DDC service about to be called
Report DDC capabilities

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful

Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination supports DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer

Reading next EDID block

VBE/DDC service about to be called
Read EDID

Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call successful

Extracted contents:
header: 02 03 1a 75 47 01 03 04
serial number: 05 12 93 14 23 09 07 07 83 01
version: 00 00
basic params: 65 03 0c 00 10
chroma info: 00 01 1d 00 72 51 d0 1e 20 6e
established: 28 55 00
standard: c4 8e 21 00 00 1e 01 1d 80 18 71 1c 16 20 58 2c
descriptor 1: 25 00 c4 8e 21 00 00 9e 8c 0a d0 90 20 40 31 20 0c 40
descriptor 2: 55 00 c4 8e 21 00 00 18 01 1d 00 bc 52 d0 1e 20 b8 28
descriptor 3: 55 40 c4 8e 21 00 00 1e 01 1d 80 d0 72 1c 16 20 10 2c
descriptor 4: 25 80 c4 8e 21 00 00 9e 00 00 00 ff 00 00 00 00 00 00
extensions: 00
checksum: 49

No header found
Manufacturer: AHR Model 1493 Serial Number 117901603
EDID version: 0.0
Analog display, Input voltage level: 0.7/0.7 V
Sync: Composite Serration
Maximum image size: 3 cm x 12 cm
Gamma: 1.00
Non-RGB color display
Established timings supported:
640x480@60Hz
640x480@72Hz
800x600@75Hz
1280x768@87Hz
1024x768@70Hz
1280x1024@75Hz
Standard timings supported:
1816x1452@74Hz
512x320@60Hz
non-conformant standard timing (0 horiz)
256x160@89Hz
1272x795@84Hz
1152x720@88Hz
424x265@92Hz
952x595@104Hz
Detailed mode: Clock 0.370 MHz, 800 mm x 320 mm
708 1360 1626 1106 hborder 32
2304 2317 2317 5888 vborder 12
-hsync -vsync analog composite
Detailed mode: Clock 0.850 MHz, 338 mm x 3792 mm
708 1221 2018 1106 hborder 32
256 304 304 2304 vborder 184
-hsync -vsync bipolar analog composite
Detailed mode: Clock 164.690 MHz, 370 mm x 1564 mm
708 1477 1762 1106 hborder 32
256 264 264 3840 vborder 16
-hsync +vsync bipolar analog composite
Detailed mode: Clock 328.050 MHz, 0 mm x 0 mm
708 1476 2244 1106 hborder 0
2304 2352 2400 5888 vborder 0
-hsync -vsync analog composite
Checksum: 0x49
EDID block does not conform at all!
Bad year of manufacture
Bad week of manufacture

επίσης εάν συνεχίσω τις προηγούμενες εντολές συμβαίνουν τα εξής

Κώδικας: Επιλογή όλων

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# xrandr --newmode "1366x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync
xrandr: Failed to get size of gamma for output default

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# xrandr --addmode VGA1 "1366x768_60.00"
xrandr: Failed to get size of gamma for output default
xrandr: cannot find output "VGA1

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# xrandr --output VGA1 --mode 1366x768_60.00
xrandr: Failed to get size of gamma for output default
warning: output VGA1 not found; ignoring

root@radium-EP35-DS3P:~/Επιφάνεια εργασίας# xrandr | grep 1366 -C 5
xrandr: Failed to get size of gamma for output default
400x300 123.0 124.0 125.0 126.0 127.0
360x200 128.0
320x240 129.0 130.0 131.0 132.0
320x200 133.0
320x175 134.0
1366x768_60.00 (0x1f3) 85.2MHz
h: width 1368 start 1440 end 1576 total 1784 skew 0 clock 47.8KHz
v: height 768 start 771 end 781 total 798 clock 59.9Hz


μετά από τις εντολές φαίνεται μια επιπλέον γραμμή με την σωστή ανάλυση αλλά δεν υπάρχει στο arandr στις διαθέσιμες αναλύσεις.... κάτι κάνω λάθος????