Δημοσιεύτηκε: 08 Σεπ 2012, 18:32
- Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 44)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 23)
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
00:07.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 11)
00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 30)
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
00:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200] [1002:5961] (rev 01)
bill@Pentium3:~$ lspci -nn
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev 44)
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598]
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C596 ISA [Mobile South] [1106:0596] (rev 23)
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 10)
00:07.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 11)
00:07.3 Host bridge [0600]: VIA Technologies, Inc. VT82C596 Power Management [1106:3050] (rev 30)
00:09.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
00:0a.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 61)
00:0a.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 63)
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV280 [Radeon 9200] [1002:5961] (rev 01)
- Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-30-generic (buildd@aatxe) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #48-Ubuntu SMP Fri Aug 24 16:54:40 UTC 2012 (Ubuntu 3.2.0-30.48-generic 3.2.27)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: VIA Technologies, Inc. VT82C693ABX/Advance-9, BIOS 4.51 PG 07/27/2000
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xfff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 0F0000000 mask FFC000000 write-combining
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-000000000fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 000fc00000 page 2M
[ 0.000000] 000fc00000 - 000fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to fff0000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 0d87c000 - 0ec1d000
[ 0.000000] ACPI: RSDP 000f7430 00014 (v00 QDIGRP)
[ 0.000000] ACPI: RSDT 0fff3000 00028 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 0fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 0fff30c0 01DBF (v01 QDIGRP AWRDACPI 00001000 MSFT 0100000A)
[ 0.000000] ACPI: FACS 0fff0000 00040
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 255MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 0fff0000
[ 0.000000] low ram: 0 - 0fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0000fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000fff0
[ 0.000000] On node 0 totalpages: 65408
[ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map cfdef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60944 pages, LIFO batch:15
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] APIC: switched to apic NOOP
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 10000000 (gap: 10000000:efff0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @cfdde000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64896
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-30-generic root=UUID=15813532-cb3f-4054-a0f0-b4b53b0279bf ro splash quiet vt.handoff=7
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1048064 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 228156k/262080k available (5618k kernel code, 33476k reserved, 2762k data, 712k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xd07f0000 - 0xff7fe000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xcfff0000 ( 255 MB)
[ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB)
[ 0.000000] .data : 0xc157cac4 - 0xc182f5c0 (2762 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157cac4 (5618 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=cf808000 soft=cf80a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 938.832 MHz processor.
[ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 1877.66 BogoMIPS (lpj=3755328)
[ 0.004025] pid_max: default: 32768 minimum: 301
[ 0.004104] Security Framework initialized
[ 0.004186] AppArmor: AppArmor initialized
[ 0.004192] Yama: becoming mindful.
[ 0.008102] Mount-cache hash table entries: 512
[ 0.008596] Initializing cgroup subsys cpuacct
[ 0.008618] Initializing cgroup subsys memory
[ 0.008647] Initializing cgroup subsys devices
[ 0.008656] Initializing cgroup subsys freezer
[ 0.008663] Initializing cgroup subsys blkio
[ 0.008687] Initializing cgroup subsys perf_event
[ 0.008780] CPU serial number disabled.
[ 0.008794] mce: CPU supports 5 MCE banks
[ 0.008979] SMP alternatives: switching to UP code
[ 0.022836] Freeing SMP alternatives: 24k freed
[ 0.022931] ACPI: Core revision 20110623
[ 0.025663] ACPI: setting ELCR to 0200 (from 1e20)
[ 0.027226] ftrace: allocating 25901 entries in 51 pages
[ 0.036072] weird, boot CPU (#0) not listed by the BIOS.
[ 0.036090] SMP motherboard not detected.
[ 0.036099] Local APIC not detected. Using dummy APIC emulation.
[ 0.036104] SMP disabled
[ 0.036112] Performance Events:
[ 0.036122] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.036128] no hardware sampling interrupt available.
[ 0.036140] p6 PMU driver.
[ 0.036158] ... version: 0
[ 0.036163] ... bit width: 32
[ 0.036168] ... generic registers: 2
[ 0.036174] ... value mask: 00000000ffffffff
[ 0.036179] ... max period: 000000007fffffff
[ 0.036185] ... fixed-purpose events: 0
[ 0.036190] ... event mask: 0000000000000003
[ 0.037419] NMI watchdog disabled (cpu0): not supported (no LAPIC?)
[ 0.037777] Brought up 1 CPUs
[ 0.037792] Total of 1 processors activated (1877.66 BogoMIPS).
[ 0.038932] devtmpfs: initialized
[ 0.039405] EVM: security.selinux
[ 0.039412] EVM: security.SMACK64
[ 0.039417] EVM: security.capability
[ 0.039658] PM: Registering ACPI NVS region at fff0000 (12288 bytes)
[ 0.044648] print_constraints: dummy:
[ 0.044724] RTC time: 15:27:55, date: 09/08/12
[ 0.044901] NET: Registered protocol family 16
[ 0.045346] EISA bus registered
[ 0.045487] ACPI: bus type pci registered
[ 0.075433] PCI: PCI BIOS revision 2.10 entry at 0xfb230, last bus=1
[ 0.075441] PCI: Using configuration type 1 for base access
[ 0.079763] bio: create slab <bio-0> at 0
[ 0.080215] ACPI: Added _OSI(Module Device)
[ 0.080225] ACPI: Added _OSI(Processor Device)
[ 0.080233] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.080240] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.081162] ACPI: EC: Look up EC in DSDT
[ 0.084172] ACPI: Interpreter enabled
[ 0.084202] ACPI: (supports S0 S1 S5)
[ 0.084254] ACPI: Using PIC for interrupt routing
[ 0.090350] ACPI: No dock devices found.
[ 0.090362] HEST: Table not found.
[ 0.090383] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.090616] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.091023] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.091033] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[ 0.091043] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
[ 0.091051] pci_root PNP0A03:00: host bridge window [io 0x5010-0xffff] (ignored)
[ 0.091060] pci_root PNP0A03:00: host bridge window [mem 0x10000000-0xffffffff] (ignored)
[ 0.091104] pci 0000:00:00.0: [1106:0691] type 0 class 0x000600
[ 0.091131] pci 0000:00:00.0: reg 10: [mem 0xf0000000-0xf3ffffff pref]
[ 0.091219] pci 0000:00:01.0: [1106:8598] type 1 class 0x000604
[ 0.091271] pci 0000:00:01.0: supports D1
[ 0.091303] pci 0000:00:07.0: [1106:0596] type 0 class 0x000601
[ 0.091390] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[ 0.091438] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f]
[ 0.091506] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[ 0.091553] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[ 0.091615] pci 0000:00:07.3: [1106:3050] type 0 class 0x000600
[ 0.091699] pci 0000:00:09.0: [10ec:8139] type 0 class 0x000200
[ 0.091720] pci 0000:00:09.0: reg 10: [io 0xd800-0xd8ff]
[ 0.091735] pci 0000:00:09.0: reg 14: [mem 0xf6000000-0xf60000ff]
[ 0.091799] pci 0000:00:09.0: supports D1 D2
[ 0.091806] pci 0000:00:09.0: PME# supported from D1 D2 D3hot
[ 0.091818] pci 0000:00:09.0: PME# disabled
[ 0.091847] pci 0000:00:0a.0: [1106:3038] type 0 class 0x000c03
[ 0.091895] pci 0000:00:0a.0: reg 20: [io 0xdc00-0xdc1f]
[ 0.091937] pci 0000:00:0a.0: supports D1 D2
[ 0.091944] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.091953] pci 0000:00:0a.0: PME# disabled
[ 0.092058] pci 0000:00:0a.1: [1106:3038] type 0 class 0x000c03
[ 0.092106] pci 0000:00:0a.1: reg 20: [io 0xe000-0xe01f]
[ 0.092149] pci 0000:00:0a.1: supports D1 D2
[ 0.092155] pci 0000:00:0a.1: PME# supported from D0 D1 D2 D3hot
[ 0.092164] pci 0000:00:0a.1: PME# disabled
[ 0.092192] pci 0000:00:0a.2: [1106:3104] type 0 class 0x000c03
[ 0.092214] pci 0000:00:0a.2: reg 10: [mem 0xf6001000-0xf60010ff]
[ 0.092283] pci 0000:00:0a.2: supports D1 D2
[ 0.092290] pci 0000:00:0a.2: PME# supported from D0 D1 D2 D3hot
[ 0.092299] pci 0000:00:0a.2: PME# disabled
[ 0.092386] pci 0000:01:00.0: [1002:5961] type 0 class 0x000300
[ 0.092410] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref]
[ 0.092425] pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
[ 0.092440] pci 0000:01:00.0: reg 18: [mem 0xf5000000-0xf500ffff]
[ 0.092474] pci 0000:01:00.0: reg 30: [mem 0xf4000000-0xf401ffff pref]
[ 0.092512] pci 0000:01:00.0: supports D1 D2
[ 0.092560] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.092571] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.092580] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.092591] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.092607] pci_bus 0000:00: on NUMA node 0
[ 0.092625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.093133] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.096242] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 0.096665] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 0.097069] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 0.097488] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 0.098112] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.098121] vgaarb: loaded
[ 0.098127] vgaarb: bridge control possible 0000:01:00.0
[ 0.098573] i2c-core: driver [aat2870] using legacy suspend method
[ 0.098580] i2c-core: driver [aat2870] using legacy resume method
[ 0.098982] SCSI subsystem initialized
[ 0.099265] libata version 3.00 loaded.
[ 0.099477] usbcore: registered new interface driver usbfs
[ 0.099521] usbcore: registered new interface driver hub
[ 0.099642] usbcore: registered new device driver usb
[ 0.100046] PCI: Using ACPI for IRQ routing
[ 0.100062] PCI: pci_cache_line_size set to 32 bytes
[ 0.100162] reserve RAM buffer: 000000000fff0000 - 000000000fffffff
[ 0.100649] NetLabel: Initializing
[ 0.100657] NetLabel: domain hash size = 128
[ 0.100662] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.100708] NetLabel: unlabeled traffic allowed by default
[ 0.101004] Switching to clocksource pit
[ 0.136467] AppArmor: AppArmor Filesystem Enabled
[ 0.136668] pnp: PnP ACPI init
[ 0.136760] ACPI: bus type pnp registered
[ 0.137507] pnp 00:00: [mem 0x000a0000-0x000effff window]
[ 0.137518] pnp 00:00: [mem 0x000cd000-0x000cffff]
[ 0.137526] pnp 00:00: [mem 0x000f0000-0x000f7fff]
[ 0.137533] pnp 00:00: [mem 0x000f8000-0x000fbfff]
[ 0.137540] pnp 00:00: [mem 0x000fc000-0x000fffff]
[ 0.137548] pnp 00:00: [mem 0x0fff0000-0x0fffffff]
[ 0.137555] pnp 00:00: [mem 0xffff0000-0xffffffff]
[ 0.137562] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.137570] pnp 00:00: [mem 0x00100000-0x0ffeffff]
[ 0.137834] system 00:00: [mem 0x000a0000-0x000effff window] could not be reserved
[ 0.137846] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.137855] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.137865] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.137874] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.137884] system 00:00: [mem 0x0fff0000-0x0fffffff] could not be reserved
[ 0.137893] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.137902] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.137912] system 00:00: [mem 0x00100000-0x0ffeffff] could not be reserved
[ 0.137927] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.138144] pnp 00:01: [bus 00-ff]
[ 0.138154] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.138162] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.138184] pnp 00:01: [io 0x0d00-0x3fff window]
[ 0.138192] pnp 00:01: [io 0x4000-0x407f]
[ 0.138199] pnp 00:01: [io 0x4080-0x40ff]
[ 0.138206] pnp 00:01: [io 0x4100-0x4fff window]
[ 0.138213] pnp 00:01: [io 0x5000-0x500f]
[ 0.138220] pnp 00:01: [io 0x5010-0xffff window]
[ 0.138227] pnp 00:01: [mem 0x10000000-0xffffffff window]
[ 0.138362] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.138696] pnp 00:02: [io 0x0010-0x001f]
[ 0.138705] pnp 00:02: [io 0x0022-0x003f]
[ 0.138712] pnp 00:02: [io 0x0044-0x005f]
[ 0.138718] pnp 00:02: [io 0x0062-0x0063]
[ 0.138725] pnp 00:02: [io 0x0065-0x006f]
[ 0.138732] pnp 00:02: [io 0x0074-0x007f]
[ 0.138738] pnp 00:02: [io 0x0091-0x0093]
[ 0.138745] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.138751] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.138758] pnp 00:02: [io 0x03f0-0x03f1]
[ 0.138765] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.138772] pnp 00:02: [io 0x0294-0x0297]
[ 0.139053] system 00:02: [io 0x03f0-0x03f1] has been reserved
[ 0.139063] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.139072] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.139083] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.139134] pnp 00:03: [dma 4]
[ 0.139142] pnp 00:03: [io 0x0000-0x000f]
[ 0.139149] pnp 00:03: [io 0x0080-0x0090]
[ 0.139156] pnp 00:03: [io 0x0094-0x009f]
[ 0.139162] pnp 00:03: [io 0x00c0-0x00df]
[ 0.139273] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.139312] pnp 00:04: [io 0x0070-0x0073]
[ 0.139328] pnp 00:04: [irq 8]
[ 0.139416] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.139448] pnp 00:05: [io 0x0061]
[ 0.139550] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.139583] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.139591] pnp 00:06: [irq 13]
[ 0.139678] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.140014] pnp 00:07: [io 0x03f2-0x03f5]
[ 0.140022] pnp 00:07: [io 0x03f7]
[ 0.140030] pnp 00:07: [irq 6]
[ 0.140037] pnp 00:07: [dma 2]
[ 0.140179] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.140590] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.140599] pnp 00:08: [irq 4]
[ 0.140766] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.141186] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.141194] pnp 00:09: [irq 3]
[ 0.141343] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.141844] pnp 00:0a: [io 0x0378-0x037f]
[ 0.141853] pnp 00:0a: [irq 7]
[ 0.142029] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.142439] pnp 00:0b: [io 0x0060]
[ 0.142446] pnp 00:0b: [io 0x0064]
[ 0.142454] pnp 00:0b: [irq 1]
[ 0.142547] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.142572] pnp: PnP ACPI: found 12 devices
[ 0.142578] ACPI: ACPI bus type pnp unregistered
[ 0.142593] PnPBIOS: Disabled by ACPI PNP
[ 0.184301] Switching to clocksource acpi_pm
[ 0.184409] PCI: max bus depth: 1 pci_try_num: 2
[ 0.184463] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.184476] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.184491] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf5ffffff]
[ 0.184502] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff pref]
[ 0.184536] pci 0000:00:01.0: setting latency timer to 64
[ 0.184550] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.184558] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.184567] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.184575] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf5ffffff]
[ 0.184583] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff pref]
[ 0.184795] NET: Registered protocol family 2
[ 0.185068] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.185775] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.186178] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.186570] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.186579] TCP reno registered
[ 0.186590] UDP hash table entries: 128 (order: 0, 4096 bytes)
[ 0.186641] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
[ 0.187147] NET: Registered protocol family 1
[ 0.187234] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.187249] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.188410] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.188422] PCI: setting IRQ 10 as level-triggered
[ 0.188439] pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.188475] pci 0000:00:07.2: PCI INT D disabled
[ 0.189234] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
[ 0.189242] PCI: setting IRQ 12 as level-triggered
[ 0.189254] pci 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.189276] pci 0000:00:0a.0: PCI INT A disabled
[ 0.189836] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[ 0.189843] PCI: setting IRQ 5 as level-triggered
[ 0.189855] pci 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.189876] pci 0000:00:0a.1: PCI INT B disabled
[ 0.189898] pci 0000:00:0a.2: PCI INT C -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.189966] pci 0000:00:0a.2: PCI INT C disabled
[ 0.189982] pci 0000:01:00.0: Boot video device
[ 0.189991] PCI: CLS 32 bytes, default 32
[ 0.191507] audit: initializing netlink socket (disabled)
[ 0.191564] type=2000 audit(1347118075.184:1): initialized
[ 0.254816] Trying to unpack rootfs image as initramfs...
[ 0.326521] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.344742] VFS: Disk quotas dquot_6.5.2
[ 0.344985] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.347410] fuse init (API version 7.17)
[ 0.347810] msgmni has been set to 445
[ 0.364701] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.365012] io scheduler noop registered
[ 0.365019] io scheduler deadline registered
[ 0.365059] io scheduler cfq registered (default)
[ 0.365585] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.365689] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.366228] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.366256] ACPI: Power Button [PWRB]
[ 0.366433] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.366444] ACPI: Power Button [PWRF]
[ 0.366631] Marking TSC unstable due to TSC halts in idle
[ 0.366655] ACPI: acpi_idle registered with cpuidle
[ 0.369133] ERST: Table is not found!
[ 0.369142] GHES: HEST is not enabled!
[ 0.369752] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.390473] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.390576] isapnp: Scanning for PnP cards...
[ 0.513100] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.582123] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.645712] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.646109] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646121] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646134] pnp 01:01.00: increased option port range from 0x388-0x388 to 0x388-0x3f8
[ 0.646274] pnp 01:01.02: added ioport region 0xe20-0xe20 to set 0
[ 0.646283] pnp 01:01.02: added ioport region 0xa20-0xa20 to set 0
[ 0.646291] pnp 01:01.02: added ioport region 0xe20-0xe80 to set 1
[ 0.646299] pnp 01:01.02: added ioport region 0xa20-0xa80 to set 1
[ 0.646416] 01:01: card 'Creative SB AWE64 Gold'
[ 0.646423] isapnp: 1 Plug & Play card detected total
[ 0.673287] Linux agpgart interface v0.103
[ 0.673578] agpgart: Detected VIA Apollo Pro 133 chipset
[ 0.677973] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
[ 0.688852] brd: module loaded
[ 0.698433] loop: module loaded
[ 0.700879] Fixed MDIO Bus: probed
[ 0.700957] tun: Universal TUN/TAP device driver, 1.6
[ 0.700964] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.701259] PPP generic driver version 2.4.2
[ 0.701621] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.701717] ehci_hcd 0000:00:0a.2: PCI INT C -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.701784] ehci_hcd 0000:00:0a.2: EHCI Host Controller
[ 0.701948] ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
[ 0.702105] ehci_hcd 0000:00:0a.2: irq 10, io mem 0xf6001000
[ 0.712733] ehci_hcd 0000:00:0a.2: USB 2.0 started, EHCI 1.00
[ 0.713540] hub 1-0:1.0: USB hub found
[ 0.713563] hub 1-0:1.0: 4 ports detected
[ 0.713845] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.713908] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.714055] uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
[ 0.714098] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 0.714329] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
[ 0.714415] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000d400
[ 0.714951] hub 2-0:1.0: USB hub found
[ 0.714969] hub 2-0:1.0: 2 ports detected
[ 0.715221] uhci_hcd 0000:00:0a.0: PCI INT A -> Link[LNKB] -> GSI 12 (level, low) -> IRQ 12
[ 0.715249] uhci_hcd 0000:00:0a.0: UHCI Host Controller
[ 0.715449] uhci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 3
[ 0.715514] uhci_hcd 0000:00:0a.0: irq 12, io base 0x0000dc00
[ 0.721235] hub 3-0:1.0: USB hub found
[ 0.721269] hub 3-0:1.0: 2 ports detected
[ 0.721547] uhci_hcd 0000:00:0a.1: PCI INT B -> Link[LNKC] -> GSI 5 (level, low) -> IRQ 5
[ 0.721589] uhci_hcd 0000:00:0a.1: UHCI Host Controller
[ 0.721930] uhci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 4
[ 0.722012] uhci_hcd 0000:00:0a.1: irq 5, io base 0x0000e000
[ 0.722645] hub 4-0:1.0: USB hub found
[ 0.722663] hub 4-0:1.0: 2 ports detected
[ 0.723113] usbcore: registered new interface driver libusual
[ 0.723291] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.723300] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.724290] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.724754] mousedev: PS/2 mouse device common for all mice
[ 0.725522] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.725570] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.725881] device-mapper: uevent: version 1.0.3
[ 0.726150] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.726276] EISA: Probing bus 0 at eisa.0
[ 0.726323] Cannot allocate resource for EISA slot 4
[ 0.726352] EISA: Detected 0 cards.
[ 0.726397] cpufreq-nforce2: No nForce2 chipset.
[ 0.726500] cpuidle: using governor ladder
[ 0.726629] cpuidle: using governor menu
[ 0.726636] EFI Variables Facility v0.08 2004-May-17
[ 0.727493] TCP cubic registered
[ 0.728005] NET: Registered protocol family 10
[ 0.740467] NET: Registered protocol family 17
[ 0.740545] Registering the dns_resolver key type
[ 0.740705] Using IPI No-Shortcut mode
[ 0.741305] PM: Hibernation image not present or could not be loaded.
[ 0.741384] registered taskstats version 1
[ 0.758325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.024387] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[ 2.179194] Freeing initrd memory: 20100k freed
[ 2.310098] Magic number: 12:136:487
[ 2.310390] rtc_cmos 00:04: setting system clock to 2012-09-08 15:27:57 UTC (1347118077)
[ 2.310472] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.310479] EDD information not available.
[ 2.311023] Freeing unused kernel memory: 712k freed
[ 2.314541] Write protecting the kernel text: 5620k
[ 2.314677] Write protecting the kernel read-only data: 2324k
[ 2.419558] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.420600] zram: num_devices not specified. Using default: 1
[ 2.420608] zram: Creating 1 devices ...
[ 2.447270] udevd[87]: starting version 175
[ 3.023680] pata_via 0000:00:07.1: version 0.3.4
[ 3.060302] scsi0 : pata_via
[ 3.064278] scsi1 : pata_via
[ 3.064611] ata1: PATA max UDMA/66 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 3.064623] ata2: PATA max UDMA/66 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 3.191563] Floppy drive(s): fd0 is 1.44M
[ 3.228333] FDC 0 is a post-1991 82077
[ 3.228873] ata1.00: ATA-6: WDC WD400JB-00FMA0, 13.03G13, max UDMA/100
[ 3.228883] ata1.00: 78165360 sectors, multi 16: LBA
[ 3.231616] Adding 124492k swap on /dev/zram0. Priority:100 extents:1 across:124492k SS
[ 3.244690] ata1.00: configured for UDMA/66
[ 3.245249] scsi 0:0:0:0: Direct-Access ATA WDC WD400JB-00FM 13.0 PQ: 0 ANSI: 5
[ 3.246123] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.246739] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 3.246910] sd 0:0:0:0: [sda] Write Protect is off
[ 3.246921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.246991] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.263602] [drm] Initialized drm 1.1.0 20060810
[ 3.285304] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.285386] 8139cp 0000:00:09.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.293692] sda: sda1 sda2 < sda5 >
[ 3.295127] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.416518] ata2.00: ATAPI: CD-532E, 1.0A, max MWDMA2
[ 3.416544] ata2.01: ATAPI: _NEC DVD_RW ND-2500A, 1.07, max UDMA/33
[ 3.432546] ata2.00: configured for MWDMA2
[ 3.448574] ata2.01: configured for UDMA/33
[ 3.451008] scsi 1:0:0:0: CD-ROM TEAC CD-532E 1.0A PQ: 0 ANSI: 5
[ 3.453244] sr0: scsi3-mmc drive: 32x/32x xa/form2 cdda tray
[ 3.453264] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.453769] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.454226] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.457099] scsi 1:0:1:0: CD-ROM _NEC DVD_RW ND-2500A 1.07 PQ: 0 ANSI: 5
[ 3.458594] sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 3.459130] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 3.459529] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 3.471379] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 3.472698] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 3.472711] PCI: setting IRQ 11 as level-triggered
[ 3.472729] 8139too 0000:00:09.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.474677] 8139too 0000:00:09.0: eth0: RealTek RTL8139 at 0xd800, 00:0e:2e:29:98:30, IRQ 11
[ 3.490691] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:07.2/usb2/2-2/2-2:1.0/input/input3
[ 3.491253] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:07.2-2/input0
[ 3.491351] usbcore: registered new interface driver usbhid
[ 3.491358] usbhid: USB HID core driver
[ 3.796214] [drm] radeon defaulting to kernel modesetting.
[ 3.796236] [drm] radeon kernel modesetting enabled.
[ 3.796496] radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 3.804289] [drm] initializing kernel modesetting (RV280 0x1002:0x5961 0x148C:0x2069).
[ 3.804362] [drm] register mmio base: 0xF5000000
[ 3.804368] [drm] register mmio size: 65536
[ 3.805186] agpgart-via 0000:00:00.0: AGP 1.0 bridge
[ 3.806598] agpgart-via 0000:00:00.0: putting AGP V2 device into 2x mode
[ 3.806658] radeon 0000:01:00.0: putting AGP V2 device into 2x mode
[ 3.806674] radeon 0000:01:00.0: GTT: 64M 0xF0000000 - 0xF3FFFFFF
[ 3.806687] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.806701] radeon 0000:01:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (128M used)
[ 3.806798] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.806805] [drm] Driver supports precise vblank timestamp query.
[ 3.806862] [drm] radeon: irq initialized.
[ 3.812591] [drm] Detected VRAM RAM=256M, BAR=256M
[ 3.812604] [drm] RAM width 64bits DDR
[ 3.814870] [TTM] Zone kernel: Available graphics memory: 124496 kiB.
[ 3.814882] [TTM] Initializing pool allocator.
[ 3.815000] [drm] radeon: 128M of VRAM memory ready
[ 3.815009] [drm] radeon: 64M of GTT memory ready.
[ 3.817424] radeon 0000:01:00.0: WB disabled
[ 3.819995] [drm] Loading R200 Microcode
[ 3.837484] [drm] radeon: ring at 0x00000000F0001000
[ 3.837521] [drm] ring test succeeded in 0 usecs
[ 3.838019] [drm] radeon: ib pool ready.
[ 3.838278] [drm] ib test succeeded in 0 usecs
[ 3.838951] [drm] No TV DAC info found in BIOS
[ 3.839164] [drm] Radeon Display Connectors
[ 3.839170] [drm] Connector 0:
[ 3.839175] [drm] VGA
[ 3.839184] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 3.839190] [drm] Encoders:
[ 3.839195] [drm] CRT1: INTERNAL_DAC1
[ 3.839200] [drm] Connector 1:
[ 3.839204] [drm] DVI-I
[ 3.839209] [drm] HPD1
[ 3.839215] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.839221] [drm] Encoders:
[ 3.839225] [drm] CRT2: INTERNAL_DAC2
[ 3.839230] [drm] DFP1: INTERNAL_TMDS1
[ 3.839235] [drm] Connector 2:
[ 3.839239] [drm] S-video
[ 3.839243] [drm] Encoders:
[ 3.839248] [drm] TV1: INTERNAL_DAC2
[ 4.024699] [drm] fb mappable at 0xE0040000
[ 4.024809] [drm] vram apper at 0xE0000000
[ 4.024816] [drm] size 8294400
[ 4.024821] [drm] fb depth is 24
[ 4.024826] [drm] pitch is 7680
[ 4.030722] fbcon: radeondrmfb (fb0) is primary device
[ 4.032899] Console: switching to colour frame buffer device 240x67
[ 4.033188] fb0: radeondrmfb frame buffer device
[ 4.033195] drm: registered panic notifier
[ 4.033235] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0
[ 7.051000] Btrfs loaded
[ 7.089884] xor: automatically using best checksumming function: pIII_sse
[ 7.108036] pIII_sse : 1899.000 MB/sec
[ 7.108044] xor: using function: pIII_sse (1899.000 MB/sec)
[ 7.114033] device-mapper: dm-raid45: initialized v0.2594b
[ 7.263700] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.263723] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.263737] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.263769] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 20 00 00 02 00
[ 7.263795] end_request: I/O error, dev sr1, sector 128
[ 7.263808] Buffer I/O error on device sr1, logical block 32
[ 7.263819] Buffer I/O error on device sr1, logical block 33
[ 7.265519] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.265531] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.265542] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.265559] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 20 00 00 01 00
[ 7.265582] end_request: I/O error, dev sr1, sector 128
[ 7.265590] Buffer I/O error on device sr1, logical block 32
[ 7.268767] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.268782] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.268794] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.268815] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 00 21 00 00 01 00
[ 7.268839] end_request: I/O error, dev sr1, sector 132
[ 7.268850] Buffer I/O error on device sr1, logical block 33
[ 7.270363] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.270375] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.270387] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.270405] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 00 00 00 04 00
[ 7.270428] end_request: I/O error, dev sr1, sector 131072
[ 7.270436] Buffer I/O error on device sr1, logical block 32768
[ 7.270446] Buffer I/O error on device sr1, logical block 32769
[ 7.270458] Buffer I/O error on device sr1, logical block 32770
[ 7.270465] Buffer I/O error on device sr1, logical block 32771
[ 7.272194] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.272206] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.272218] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.272234] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 00 00 00 01 00
[ 7.272257] end_request: I/O error, dev sr1, sector 131072
[ 7.272265] Buffer I/O error on device sr1, logical block 32768
[ 7.273901] sr 1:0:1:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 7.273912] sr 1:0:1:0: [sr1] Sense Key : Illegal Request [current]
[ 7.273923] sr 1:0:1:0: [sr1] Add. Sense: Illegal mode for this track
[ 7.273937] sr 1:0:1:0: [sr1] CDB: Read(10): 28 00 00 00 80 01 00 00 01 00
[ 7.273960] end_request: I/O error, dev sr1, sector 131076
[ 7.273967] Buffer I/O error on device sr1, logical block 32769
[ 7.420077] end_request: I/O error, dev fd0, sector 0
[ 7.515311] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 20.907741] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.006389] udevd[398]: starting version 175
[ 21.027518] Adding 520188k swap on /dev/sda5. Priority:-1 extents:1 across:520188k
[ 21.568870] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 22.103922] sbawe 01:01.00: unable to assign resources
[ 22.103942] sbawe: AUDIO pnp configure failure
[ 22.222923] lp: driver loaded but no devices found
[ 22.457355] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 22.734256] parport_pc 00:0a: reported by Plug and Play ACPI
[ 22.734336] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 22.911334] lp0: using parport0 (interrupt-driven).
[ 23.175416] ppdev: user-space parallel port driver
[ 23.305610] Bluetooth: Core ver 2.16
[ 23.310095] NET: Registered protocol family 31
[ 23.310115] Bluetooth: HCI device and connection manager initialized
[ 23.310129] Bluetooth: HCI socket layer initialized
[ 23.310136] Bluetooth: L2CAP socket layer initialized
[ 23.310198] Bluetooth: SCO socket layer initialized
[ 23.392414] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.392436] Bluetooth: BNEP filters: protocol multicast
[ 23.458325] Bluetooth: RFCOMM TTY layer initialized
[ 23.458359] Bluetooth: RFCOMM socket layer initialized
[ 23.458366] Bluetooth: RFCOMM ver 1.11
[ 23.552816] type=1400 audit(1347118098.741:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=616 comm="apparmor_parser"
[ 23.562592] type=1400 audit(1347118098.749:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=616 comm="apparmor_parser"
[ 24.075014] type=1400 audit(1347118099.261:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=629 comm="apparmor_parser"
[ 24.086102] type=1400 audit(1347118099.273:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=629 comm="apparmor_parser"
[ 24.087031] type=1400 audit(1347118099.273:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=629 comm="apparmor_parser"
[ 24.147627] type=1400 audit(1347118099.333:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=631 comm="apparmor_parser"
[ 24.535907] device-mapper: multipath: version 1.3.0 loaded
[ 28.347665] init: failsafe main process (761) killed by TERM signal
[ 29.575390] type=1400 audit(1347118104.760:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=863 comm="apparmor_parser"
[ 29.647153] type=1400 audit(1347118104.832:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser"
[ 29.676931] type=1400 audit(1347118104.864:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
[ 29.677933] type=1400 audit(1347118104.864:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
[ 29.717237] 8139too 0000:00:09.0: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 30.093909] type=1400 audit(1347118105.280:12): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=866 comm="apparmor_parser"
[ 30.254031] type=1400 audit(1347118105.440:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=866 comm="apparmor_parser"
[ 30.323744] type=1400 audit(1347118105.508:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=866 comm="apparmor_parser"
[ 30.403384] type=1400 audit(1347118105.588:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=866 comm="apparmor_parser"
[ 30.480179] type=1400 audit(1347118105.664:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=866 comm="apparmor_parser"
[ 30.508955] type=1400 audit(1347118105.696:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=866 comm="apparmor_parser"
[ 32.823326] init: alsa-restore main process (980) terminated with status 19
[ 33.394161] init: lxdm main process (991) killed by TERM signal
[ 33.524938] init: gdm main process (1042) killed by TERM signal
[ 37.218407] init: plymouth-stop pre-start process (1272) terminated with status 1
[ 40.896142] eth0: no IPv6 routers present
Δεν ξέρω αν δουλεύει αλλά για να τα κατάφερανε στο ubuntuforums μάλλον κάτι θα γίνεται