Δημοσιεύτηκε: 21 Ιαν 2010, 17:42
lsusb:
dmesg: Εμφάνισε πάρα πολλά αποτελέσματα και φαινόταν ότι όταν έφτασα πάνω πάνω ότι έπρεπε να είχε κι άλλα
- Κώδικας: Επιλογή όλων
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 002: ID 0ac8:c312 Z-Star Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg: Εμφάνισε πάρα πολλά αποτελέσματα και φαινόταν ότι όταν έφτασα πάνω πάνω ότι έπρεπε να είχε κι άλλα
- Κώδικας: Επιλογή όλων
[ 2.056034] alloc kstat_irqs on node -1
[ 2.056053] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.056130] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.056296] scsi0 : ata_piix
[ 2.056512] scsi1 : ata_piix
[ 2.059352] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 2.059360] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 2.059569] ata2: port disabled. ignoring.
[ 2.061304] Fixed MDIO Bus: probed
[ 2.061391] PPP generic driver version 2.4.2
[ 2.061603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.061649] alloc irq_desc for 23 on node -1
[ 2.061655] alloc kstat_irqs on node -1
[ 2.061667] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.061697] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.061705] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.061773] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.061783] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.065705] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.065717] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.065746] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea37c00
[ 2.080038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.080199] usb usb1: configuration #1 chosen from 1 choice
[ 2.080269] hub 1-0:1.0: USB hub found
[ 2.080287] hub 1-0:1.0: 8 ports detected
[ 2.080413] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.080455] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.080530] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.080544] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.080551] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.080624] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.080662] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
[ 2.080838] usb usb2: configuration #1 chosen from 1 choice
[ 2.080900] hub 2-0:1.0: USB hub found
[ 2.080914] hub 2-0:1.0: 2 ports detected
[ 2.081022] alloc irq_desc for 19 on node -1
[ 2.081027] alloc kstat_irqs on node -1
[ 2.081039] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.081053] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.081060] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.081136] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.081184] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
[ 2.081367] usb usb3: configuration #1 chosen from 1 choice
[ 2.081426] hub 3-0:1.0: USB hub found
[ 2.081455] hub 3-0:1.0: 2 ports detected
[ 2.081543] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.081559] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.081566] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.081629] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.081675] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[ 2.081843] usb usb4: configuration #1 chosen from 1 choice
[ 2.081902] hub 4-0:1.0: USB hub found
[ 2.081916] hub 4-0:1.0: 2 ports detected
[ 2.082000] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.082012] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.082019] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.082086] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.082132] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
[ 2.082296] usb usb5: configuration #1 chosen from 1 choice
[ 2.082356] hub 5-0:1.0: USB hub found
[ 2.082370] hub 5-0:1.0: 2 ports detected
[ 2.082563] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.088093] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 2.088968] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.088981] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.088989] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.088995] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.089004] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.089196] mice: PS/2 mouse device common for all mice
[ 2.089521] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.089563] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.089818] device-mapper: uevent: version 1.0.3
[ 2.090100] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 2.090293] device-mapper: multipath: version 1.1.0 loaded
[ 2.090302] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.090599] EISA: Probing bus 0 at eisa.0
[ 2.090641] EISA: Detected 0 cards.
[ 2.091038] cpuidle: using governor ladder
[ 2.091294] cpuidle: using governor menu
[ 2.092465] TCP cubic registered
[ 2.092833] NET: Registered protocol family 10
[ 2.093793] lo: Disabled Privacy Extensions
[ 2.094492] NET: Registered protocol family 17
[ 2.094536] Bluetooth: L2CAP ver 2.13
[ 2.094540] Bluetooth: L2CAP socket layer initialized
[ 2.094546] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.094550] Bluetooth: SCO socket layer initialized
[ 2.094679] Bluetooth: RFCOMM TTY layer initialized
[ 2.094688] Bluetooth: RFCOMM socket layer initialized
[ 2.094692] Bluetooth: RFCOMM ver 1.11
[ 2.095721] Using IPI No-Shortcut mode
[ 2.095886] PM: Resume from disk failed.
[ 2.095911] registered taskstats version 1
[ 2.096155] Magic number: 10:58:686
[ 2.096270] rtc_cmos 00:03: setting system clock to 2010-01-21 13:40:15 UTC (1264081215)
[ 2.096280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.096285] EDD information not available.
[ 2.097984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.232763] ata1.00: ATA-7: SAMSUNG HS030GB, FY100-07, max UDMA/100
[ 2.232781] ata1.00: 58633344 sectors, multi 16: LBA
[ 2.240682] ata1.00: configured for UDMA/100
[ 2.488387] ACPI: Battery Slot [BAT1] (battery present)
[ 2.488858] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS030GB FY10 PQ: 0 ANSI: 5
[ 2.489187] sd 0:0:0:0: [sda] 58633344 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 2.489219] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.489352] sd 0:0:0:0: [sda] Write Protect is off
[ 2.489360] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.489431] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.489768] sda:
[ 2.500060] Clocksource tsc unstable (delta = -340533028 ns)
[ 2.663541] sda1 sda2 sda3 sda4 < sda5 >
[ 2.703908] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.703955] Freeing unused kernel memory: 540k freed
[ 2.704518] Write protecting the kernel text: 4580k
[ 2.704596] Write protecting the kernel read-only data: 1840k
[ 2.852117] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 3.148384] usb 1-6: configuration #1 chosen from 1 choice
[ 3.175499] Linux agpgart interface v0.103
[ 3.188503] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 3.188766] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 3.191752] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 3.205663] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.205712] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.205780] r8169 0000:01:00.0: setting latency timer to 64
[ 3.205851] alloc irq_desc for 25 on node -1
[ 3.205859] alloc kstat_irqs on node -1
[ 3.205886] r8169 0000:01:00.0: irq 25 for MSI/MSI-X
[ 3.207698] eth0: RTL8102e at 0xdfffa000, 00:03:0d:a3:78:ed, XID 34a00000 IRQ 25
[ 3.272130] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 3.309294] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input6
[ 3.309375] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
[ 3.355322] [drm] Initialized drm 1.1.0 20060810
[ 3.385697] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.385708] i915 0000:00:02.0: setting latency timer to 64
[ 3.397208] i2c-adapter i2c-1: unable to read EDID block.
[ 3.397222] i915 0000:00:02.0: LVDS-1: no EDID data
[ 3.416603] i2c-adapter i2c-1: unable to read EDID block.
[ 3.416613] i915 0000:00:02.0: LVDS-1: no EDID data
[ 3.421834] [drm] fb0: inteldrmfb frame buffer device
[ 3.421853] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.553244] usb 1-7: configuration #1 chosen from 1 choice
[ 3.689062] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 3.832378] usb 1-8: configuration #1 chosen from 1 choice
[ 3.858840] Initializing USB Mass Storage driver...
[ 3.859121] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.859324] usbcore: registered new interface driver usb-storage
[ 3.859331] USB Mass Storage support registered.
[ 3.859496] usb-storage: device found at 4
[ 3.859500] usb-storage: waiting for device to settle before scanning
[ 3.898641] [drm] LVDS-8: set mode 1024x600 d
[ 4.120107] Console: switching to colour frame buffer device 128x37
[ 4.829149] PM: Starting manual resume from disk
[ 4.829158] PM: Resume from partition 8:3
[ 4.829163] PM: Checking hibernation image.
[ 4.829513] PM: Resume from disk failed.
[ 4.855453] EXT4-fs (sda1): barriers enabled
[ 4.879215] kjournald2 starting: pid 371, dev sda1:8, commit interval 5 seconds
[ 4.879430] EXT4-fs (sda1): delayed allocation enabled
[ 4.879439] EXT4-fs: file extents enabled
[ 4.880808] EXT4-fs: mballoc enabled
[ 4.880840] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.052943] type=1505 audit(1264081219.455:2): operation="profile_load" pid=396 name=/usr/share/gdm/guest-session/Xsession
[ 6.058215] type=1505 audit(1264081219.459:3): operation="profile_load" pid=397 name=/sbin/dhclient3
[ 6.058822] type=1505 audit(1264081219.459:4): operation="profile_load" pid=397 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 6.059161] type=1505 audit(1264081219.459:5): operation="profile_load" pid=397 name=/usr/lib/connman/scripts/dhclient-script
[ 6.137919] type=1505 audit(1264081219.539:6): operation="profile_load" pid=398 name=/usr/bin/evince
[ 6.147204] type=1505 audit(1264081219.547:7): operation="profile_load" pid=398 name=/usr/bin/evince-previewer
[ 6.152916] type=1505 audit(1264081219.555:8): operation="profile_load" pid=398 name=/usr/bin/evince-thumbnailer
[ 6.185033] type=1505 audit(1264081219.587:9): operation="profile_load" pid=400 name=/usr/lib/cups/backend/cups-pdf
[ 6.185801] type=1505 audit(1264081219.587:10): operation="profile_load" pid=400 name=/usr/sbin/cupsd
[ 6.201480] type=1505 audit(1264081219.603:11): operation="profile_load" pid=401 name=/usr/sbin/tcpdump
[ 7.808094] Adding 2931852k swap on /dev/sda3. Priority:-1 extents:1 across:2931852k
[ 8.698828] EXT4-fs (sda1): internal journal on sda1:8
[ 8.857653] usb-storage: device scan complete
[ 8.859923] scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 8.861078] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 8.865551] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.564508] udev: starting version 147
[ 9.915714] EXT4-fs (sda2): barriers enabled
[ 9.929816] kjournald2 starting: pid 477, dev sda2:8, commit interval 5 seconds
[ 10.014963] EXT4-fs (sda2): internal journal on sda2:8
[ 10.014977] EXT4-fs (sda2): delayed allocation enabled
[ 10.014987] EXT4-fs: file extents enabled
[ 10.017401] EXT4-fs: mballoc enabled
[ 10.017455] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 12.215333] input: PS/2 Mouse as /devices/platform/i8042/serio2/input/input7
[ 12.235932] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio2/input/input8
[ 12.244949] lp: driver loaded but no devices found
[ 23.021246] usb 1-7: USB disconnect, address 3
[ 23.531431] intel_rng: FWH not detected
[ 23.865809] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.812293] kjournald starting. Commit interval 5 seconds
[ 27.946782] EXT3 FS on sda5, internal journal
[ 27.946806] EXT3-fs: mounted filesystem with writeback data mode.
[ 28.526663] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.526730] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 28.782827] hda_codec: Unknown model for ALC662 rev1, trying auto-probe from BIOS...
[ 28.783971] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 29.693301] Linux video capture interface: v2.00
[ 29.748615] uvcvideo: Found UVC 1.00 device Sirius USB2.0 Camera (0ac8:c312)
[ 29.752881] input: Sirius USB2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input10
[ 29.753042] usbcore: registered new interface driver uvcvideo
[ 29.753053] USB Video Class driver (v0.1.0)
[ 30.264760] r8169: eth0: link down
[ 30.264903] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.369378] cfg80211: Calling CRDA to update world regulatory domain
[ 31.827437] cfg80211: World regulatory domain updated:
[ 31.827446] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.827454] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.827461] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.827467] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.827474] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.827480] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 32.157286] usbcore: registered new interface driver rt73usb
[ 32.507599] type=1505 audit(1264081245.907:12): operation="profile_replace" pid=986 name=/usr/share/gdm/guest-session/Xsession
[ 32.511247] type=1505 audit(1264081245.911:13): operation="profile_replace" pid=987 name=/sbin/dhclient3
[ 32.511842] type=1505 audit(1264081245.911:14): operation="profile_replace" pid=987 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 32.512213] type=1505 audit(1264081245.915:15): operation="profile_replace" pid=987 name=/usr/lib/connman/scripts/dhclient-script
[ 32.521560] type=1505 audit(1264081245.923:16): operation="profile_replace" pid=988 name=/usr/bin/evince
[ 32.531093] type=1505 audit(1264081245.931:17): operation="profile_replace" pid=988 name=/usr/bin/evince-previewer
[ 32.537131] type=1505 audit(1264081245.939:18): operation="profile_replace" pid=988 name=/usr/bin/evince-thumbnailer
[ 32.548639] type=1505 audit(1264081245.951:19): operation="profile_replace" pid=990 name=/usr/lib/cups/backend/cups-pdf
[ 32.549581] type=1505 audit(1264081245.951:20): operation="profile_replace" pid=990 name=/usr/sbin/cupsd
[ 32.553710] type=1505 audit(1264081245.955:21): operation="profile_replace" pid=991 name=/usr/sbin/tcpdump
[ 34.854372] i2c-adapter i2c-1: unable to read EDID block.
[ 34.854387] i915 0000:00:02.0: LVDS-1: no EDID data
[ 34.932184] i2c-adapter i2c-1: unable to read EDID block.
[ 34.932194] i915 0000:00:02.0: LVDS-1: no EDID data
[ 38.149063] ppdev: user-space parallel port driver
[ 40.457181] CPU0 attaching NULL sched-domain.
[ 40.457192] CPU1 attaching NULL sched-domain.
[ 40.476227] CPU0 attaching sched-domain:
[ 40.476243] domain 0: span 0-1 level SIBLING
[ 40.476256] groups: 0 1
[ 40.476276] domain 1: span 0-1 level MC
[ 40.476287] groups: 0-1 (__cpu_power = 2048)
[ 40.476308] CPU1 attaching sched-domain:
[ 40.476318] domain 0: span 0-1 level SIBLING
[ 40.476329] groups: 1 0
[ 40.476351] domain 1: span 0-1 level MC
[ 40.476356] groups: 0-1 (__cpu_power = 2048)
[ 46.249887] CPU0 attaching NULL sched-domain.
[ 46.249901] CPU1 attaching NULL sched-domain.
[ 46.265267] CPU0 attaching sched-domain:
[ 46.265285] domain 0: span 0-1 level SIBLING
[ 46.265298] groups: 0 1
[ 46.265317] domain 1: span 0-1 level MC
[ 46.265328] groups: 0-1 (__cpu_power = 2048)
[ 46.265354] CPU1 attaching sched-domain:
[ 46.265359] domain 0: span 0-1 level SIBLING
[ 46.265364] groups: 1 0
[ 46.265372] domain 1: span 0-1 level MC
[ 46.265377] groups: 0-1 (__cpu_power = 2048)
[ 47.649583] i2c-adapter i2c-1: unable to read EDID block.
[ 47.649594] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.688702] i2c-adapter i2c-1: unable to read EDID block.
[ 47.688712] i915 0000:00:02.0: LVDS-1: no EDID data
[ 47.769691] i2c-adapter i2c-1: unable to read EDID block.
[ 47.769703] i915 0000:00:02.0: LVDS-1: no EDID data
[ 52.837711] i2c-adapter i2c-1: unable to read EDID block.
[ 52.837721] i915 0000:00:02.0: LVDS-1: no EDID data
[ 64.510950] CPU0 attaching NULL sched-domain.
[ 64.510973] CPU1 attaching NULL sched-domain.
[ 64.521363] CPU0 attaching sched-domain:
[ 64.521375] domain 0: span 0-1 level SIBLING
[ 64.521383] groups: 0 1
[ 64.521395] CPU1 attaching sched-domain:
[ 64.521400] domain 0: span 0-1 level SIBLING
[ 64.521405] groups: 1 0
[ 68.540595] CPU0 attaching NULL sched-domain.
[ 68.540609] CPU1 attaching NULL sched-domain.
[ 68.552171] CPU0 attaching sched-domain:
[ 68.552183] domain 0: span 0-1 level SIBLING
[ 68.552192] groups: 0 1
[ 68.552205] domain 1: span 0-1 level MC
[ 68.552213] groups: 0-1 (__cpu_power = 2048)
[ 68.552228] CPU1 attaching sched-domain:
[ 68.552235] domain 0: span 0-1 level SIBLING
[ 68.552242] groups: 1 0
[ 68.552254] domain 1: span 0-1 level MC
[ 68.552261] groups: 0-1 (__cpu_power = 2048)
[ 78.694708] CPU0 attaching NULL sched-domain.
[ 78.694721] CPU1 attaching NULL sched-domain.
[ 78.708260] CPU0 attaching sched-domain:
[ 78.708276] domain 0: span 0-1 level SIBLING
[ 78.708290] groups: 0 1
[ 78.708312] CPU1 attaching sched-domain:
[ 78.708322] domain 0: span 0-1 level SIBLING
[ 78.708333] groups: 1 0
[ 126.006829] CPU0 attaching NULL sched-domain.
[ 126.006845] CPU1 attaching NULL sched-domain.
[ 126.021179] CPU0 attaching sched-domain:
[ 126.021190] domain 0: span 0-1 level SIBLING
[ 126.021198] groups: 0 1
[ 126.021214] CPU1 attaching sched-domain:
[ 126.021220] domain 0: span 0-1 level SIBLING
[ 126.021228] groups: 1 0
[ 133.513046] PM: Syncing filesystems ... done.
[ 133.866042] PM: Preparing system for mem sleep
[ 133.866053] Freezing user space processes ... (elapsed 0.09 seconds) done.
[ 133.958842] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 133.959022] PM: Entering mem sleep
[ 133.959043] Suspending console(s) (use no_console_suspend to debug)
[ 133.988119] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 133.988497] sd 0:0:0:0: [sda] Stopping disk
[ 134.862033] ata2: port disabled. ignoring.
[ 134.862103] ata_piix 0000:00:1f.1: PCI INT A disabled
[ 134.876132] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 134.876155] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 134.876173] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 134.876191] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 134.876208] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 134.876256] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 134.876333] ACPI handle has no context!
[ 134.912037] i915 0000:00:02.0: PCI INT A disabled
[ 134.928273] PM: suspend devices took 0.972 seconds
[ 134.928504] r8169 0000:01:00.0: PME# enabled
[ 134.928528] r8169 0000:01:00.0: wake-up capability enabled by ACPI
[ 134.944188] ehci_hcd 0000:00:1d.7: PME# disabled
[ 134.960252] ACPI: Preparing to enter system sleep state S3
[ 134.960998] Disabling non-boot CPUs ...
[ 135.064034] CPU 1 is now offline
[ 135.064040] SMP alternatives: switching to UP code
[ 135.069403] CPU0 attaching NULL sched-domain.
[ 135.069410] CPU1 attaching NULL sched-domain.
[ 135.069423] CPU0 attaching NULL sched-domain.
[ 135.070109] CPU1 is down
[ 135.070129] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 135.070129] Back to C!
[ 135.070129] CPU0: Thermal monitoring enabled (TM1)
[ 135.070129] Enabling non-boot CPUs ...
[ 135.070129] SMP alternatives: switching to SMP code
[ 135.075653] Booting processor 1 APIC 0x1 ip 0x6000
[ 135.069157] Initializing CPU#1
[ 135.069157] Calibrating delay using timer specific routine.. 3191.96 BogoMIPS (lpj=6383932)
[ 135.069157] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 135.069157] CPU: L2 cache: 512K
[ 135.069157] CPU: Physical Processor ID: 0
[ 135.069157] CPU: Processor Core ID: 0
[ 135.069157] mce: CPU supports 5 MCE banks
[ 135.069157] CPU1: Thermal monitoring enabled (TM1)
[ 135.069157] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 135.165046] CPU1: Intel(R) Core(TM) CPU N270 @ 1.60GHz stepping 02
[ 135.165193] CPU0 attaching NULL sched-domain.
[ 135.169019] Switched to high resolution mode on CPU 1
[ 135.176035] CPU0 attaching sched-domain:
[ 135.176044] domain 0: span 0-1 level SIBLING
[ 135.176051] groups: 0 1
[ 135.176063] CPU1 attaching sched-domain:
[ 135.176069] domain 0: span 0-1 level SIBLING
[ 135.176075] groups: 1 0
[ 135.177039] CPU1 is up
[ 135.177046] ACPI: Waking up from system sleep state S3
[ 135.177947] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xfe980000)
[ 135.177961] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 135.178013] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[ 135.178026] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 135.178068] pcieport-driver 0000:00:1c.0: restoring config space at offset 0xf (was 0x20100, writing 0x2010a)
[ 135.178097] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810008)
[ 135.178111] pcieport-driver 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
[ 135.178183] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178228] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178272] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178315] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 135.178370] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
[ 135.178398] ehci_hcd 0000:00:1d.7: PME# disabled
[ 135.178415] pci 0000:00:1e.0: restoring config space at offset 0xf (was 0x20000, writing 0x200ff)
[ 135.178531] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005)
[ 135.178618] r8169 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 135.178635] r8169 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xfebe0000)
[ 135.178654] r8169 0000:01:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xfdfe000c)
[ 135.178669] r8169 0000:01:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xfdfff00c)
[ 135.178684] r8169 0000:01:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xec01)
[ 135.178697] r8169 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x8)
[ 135.178712] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 136.019092] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 136.019101] i915 0000:00:02.0: setting latency timer to 64
[ 136.080316] [drm] LVDS-8: set mode 1024x600 d
[ 136.100400] pci 0000:00:02.1: PME# disabled
[ 136.100419] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 136.100430] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 136.100467] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 136.100477] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 136.100506] usb usb2: root hub lost power or was reset
[ 136.100531] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 136.100541] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 136.100567] usb usb3: root hub lost power or was reset
[ 136.100591] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 136.100600] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 136.100626] usb usb4: root hub lost power or was reset
[ 136.100650] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 136.100660] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 136.100686] usb usb5: root hub lost power or was reset
[ 136.100709] ehci_hcd 0000:00:1d.7: PME# disabled
[ 136.100718] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 136.100728] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 136.100748] pci 0000:00:1e.0: setting latency timer to 64
[ 136.100769] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 136.100780] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 136.100820] r8169 0000:01:00.0: wake-up capability disabled by ACPI
[ 136.100831] r8169 0000:01:00.0: PME# disabled
[ 136.105083] ata2: port disabled. ignoring.
[ 136.233128] sd 0:0:0:0: [sda] Starting disk
[ 136.272538] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 filtered out
[ 136.272547] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
[ 136.272712] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 136.284735] ata1.00: configured for UDMA/100
[ 136.300713] ata1.00: configured for UDMA/100
[ 136.300730] ata1: EH complete
[ 136.584150] usb 1-6: reset high speed USB device using ehci_hcd and address 2
[ 136.912165] usb 1-8: reset high speed USB device using ehci_hcd and address 4
[ 137.052450] PM: resume devices took 1.876 seconds
[ 137.052509] PM: Finishing wakeup.
[ 137.052513] Restarting tasks ... done.
[ 139.867049] r8169: eth0: link down
[ 139.867291] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 142.313699] CPU0 attaching NULL sched-domain.
[ 142.313712] CPU1 attaching NULL sched-domain.
[ 142.336144] CPU0 attaching sched-domain:
[ 142.336157] domain 0: span 0-1 level SIBLING
[ 142.336165] groups: 0 1
[ 142.336177] domain 1: span 0-1 level MC
[ 142.336184] groups: 0-1 (__cpu_power = 2048)
[ 142.336201] CPU1 attaching sched-domain:
[ 142.336208] domain 0: span 0-1 level SIBLING
[ 142.336215] groups: 1 0
[ 142.336226] domain 1: span 0-1 level MC
[ 142.336233] groups: 0-1 (__cpu_power = 2048)
[ 142.993607] CPU0 attaching NULL sched-domain.
[ 142.993623] CPU1 attaching NULL sched-domain.
[ 143.008210] CPU0 attaching sched-domain:
[ 143.008222] domain 0: span 0-1 level SIBLING
[ 143.008231] groups: 0 1
[ 143.008244] domain 1: span 0-1 level MC
[ 143.008252] groups: 0-1 (__cpu_power = 2048)
[ 143.008269] CPU1 attaching sched-domain:
[ 143.008276] domain 0: span 0-1 level SIBLING
[ 143.008284] groups: 1 0
[ 143.008296] domain 1: span 0-1 level MC
[ 143.008304] groups: 0-1 (__cpu_power = 2048)
[ 158.582947] r8169: eth0: link up
[ 158.583149] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 169.192074] eth0: no IPv6 routers present