Δημοσιεύτηκε: 03 Δεκ 2010, 11:24
lsusb
dmesg
- Κώδικας: Επιλογή όλων
dopa@dopa-HP-Compaq-dx7500-Microtower:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 003: ID 041e:4052 Creative Technology, Ltd Live! Cam Vista IM
Bus 007 Device 002: ID 0461:0010 Primax Electronics, Ltd
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 003: ID 0461:4d20 Primax Electronics, Ltd
Bus 006 Device 002: ID 08bb:2902 Texas Instruments Japan PCM2902 Audio Codec
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 006: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 [Atheros AR9001U-(2)NG]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0bda:0181 Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
dopa@dopa-HP-Compaq-dx7500-Microtower:~$
dmesg
- Κώδικας: Επιλογή όλων
[ 352.444137] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 352.444142] [<c0161c34>] worker_thread+0x84/0xe0
[ 352.444147] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 352.444152] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 352.444156] [<c0165a84>] kthread+0x74/0x80
[ 352.444160] [<c0165a10>] ? kthread+0x0/0x80
[ 352.444164] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 352.444168] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 353.444032] usb 2-6: no command feedback received (-110).
[ 353.444039] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 353.444045] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 353.444048] Call Trace:
[ 353.444060] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 353.444067] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 353.444073] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 353.444079] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 353.444090] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 353.444102] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 353.444111] [<c0161aee>] run_workqueue+0x8e/0x150
[ 353.444123] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 353.444128] [<c0161c34>] worker_thread+0x84/0xe0
[ 353.444133] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 353.444137] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 353.444141] [<c0165a84>] kthread+0x74/0x80
[ 353.444145] [<c0165a10>] ? kthread+0x0/0x80
[ 353.444150] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 353.444154] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 354.444029] usb 2-6: no command feedback received (-110).
[ 354.444037] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 354.444043] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 354.444046] Call Trace:
[ 354.444058] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 354.444065] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 354.444071] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 354.444077] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 354.444088] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 354.444100] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 354.444108] [<c0161aee>] run_workqueue+0x8e/0x150
[ 354.444121] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 354.444126] [<c0161c34>] worker_thread+0x84/0xe0
[ 354.444131] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 354.444136] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 354.444140] [<c0165a84>] kthread+0x74/0x80
[ 354.444144] [<c0165a10>] ? kthread+0x0/0x80
[ 354.444148] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 354.444153] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 355.444037] usb 2-6: no command feedback received (-110).
[ 355.444043] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 355.444049] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 355.444052] Call Trace:
[ 355.444064] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 355.444071] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 355.444077] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 355.444082] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 355.444094] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 355.444106] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 355.444113] [<c0161aee>] run_workqueue+0x8e/0x150
[ 355.444126] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 355.444131] [<c0161c34>] worker_thread+0x84/0xe0
[ 355.444136] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 355.444141] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 355.444145] [<c0165a84>] kthread+0x74/0x80
[ 355.444149] [<c0165a10>] ? kthread+0x0/0x80
[ 355.444153] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 355.444158] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 356.444040] usb 2-6: no command feedback received (-110).
[ 356.444046] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 356.444051] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 356.444054] Call Trace:
[ 356.444064] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 356.444071] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 356.444077] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 356.444082] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 356.444093] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 356.444105] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 356.444112] [<c0161aee>] run_workqueue+0x8e/0x150
[ 356.444124] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 356.444129] [<c0161c34>] worker_thread+0x84/0xe0
[ 356.444133] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 356.444138] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 356.444142] [<c0165a84>] kthread+0x74/0x80
[ 356.444146] [<c0165a10>] ? kthread+0x0/0x80
[ 356.444150] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 356.444154] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 357.444015] usb 2-6: no command feedback received (-110).
[ 357.444021] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 357.444026] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 357.444029] Call Trace:
[ 357.444041] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 357.444047] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 357.444053] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 357.444059] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 357.444070] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 357.444082] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 357.444089] [<c0161aee>] run_workqueue+0x8e/0x150
[ 357.444101] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 357.444106] [<c0161c34>] worker_thread+0x84/0xe0
[ 357.444111] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 357.444116] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 357.444120] [<c0165a84>] kthread+0x74/0x80
[ 357.444124] [<c0165a10>] ? kthread+0x0/0x80
[ 357.444128] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 357.444132] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 358.444542] usb 2-6: no command feedback received (-110).
[ 358.444549] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 358.444555] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 358.444558] Call Trace:
[ 358.444570] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 358.444577] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 358.444583] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 358.444589] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 358.444600] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 358.444613] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 358.444620] [<c0161aee>] run_workqueue+0x8e/0x150
[ 358.444633] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 358.444638] [<c0161c34>] worker_thread+0x84/0xe0
[ 358.444643] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 358.444647] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 358.444651] [<c0165a84>] kthread+0x74/0x80
[ 358.444656] [<c0165a10>] ? kthread+0x0/0x80
[ 358.444660] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 358.444664] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 359.444529] usb 2-6: no command feedback received (-110).
[ 359.444536] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 359.444541] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 359.444545] Call Trace:
[ 359.444557] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 359.444564] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 359.444570] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 359.444576] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 359.444587] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 359.444600] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 359.444608] [<c0161aee>] run_workqueue+0x8e/0x150
[ 359.444620] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 359.444625] [<c0161c34>] worker_thread+0x84/0xe0
[ 359.444630] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 359.444634] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 359.444638] [<c0165a84>] kthread+0x74/0x80
[ 359.444642] [<c0165a10>] ? kthread+0x0/0x80
[ 359.444647] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 359.444651] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 360.444484] usb 2-6: no command feedback received (-110).
[ 360.444491] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 360.444496] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 360.444499] Call Trace:
[ 360.444523] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 360.444530] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 360.444536] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 360.444542] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 360.444553] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 360.444566] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 360.444574] [<c0161aee>] run_workqueue+0x8e/0x150
[ 360.444586] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 360.444591] [<c0161c34>] worker_thread+0x84/0xe0
[ 360.444596] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 360.444600] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 360.444604] [<c0165a84>] kthread+0x74/0x80
[ 360.444608] [<c0165a10>] ? kthread+0x0/0x80
[ 360.444613] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 360.444617] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 361.444529] usb 2-6: no command feedback received (-110).
[ 361.444536] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 361.444541] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 361.444544] Call Trace:
[ 361.444556] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 361.444563] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 361.444569] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 361.444575] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 361.444586] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 361.444598] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 361.444606] [<c0161aee>] run_workqueue+0x8e/0x150
[ 361.444618] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 361.444623] [<c0161c34>] worker_thread+0x84/0xe0
[ 361.444628] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 361.444633] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 361.444637] [<c0165a84>] kthread+0x74/0x80
[ 361.444641] [<c0165a10>] ? kthread+0x0/0x80
[ 361.444645] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 361.444650] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 362.444522] usb 2-6: no command feedback received (-110).
[ 362.444529] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 362.444535] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 362.444538] Call Trace:
[ 362.444551] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 362.444558] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 362.444564] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 362.444570] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 362.444581] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 362.444593] [<f9956ef2>] ieee80211_scan_work+0x222/0x2f0 [mac80211]
[ 362.444601] [<c0161aee>] run_workqueue+0x8e/0x150
[ 362.444614] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 362.444619] [<c0161c34>] worker_thread+0x84/0xe0
[ 362.444624] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 362.444629] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 362.444632] [<c0165a84>] kthread+0x74/0x80
[ 362.444636] [<c0165a10>] ? kthread+0x0/0x80
[ 362.444641] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 362.444645] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 363.444524] usb 2-6: no command feedback received (-110).
[ 363.444531] ar9170 cmd: 08 01 00 00 f0 36 1c 00 00 50 00 00 .....6...P..
[ 363.444536] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 363.444540] Call Trace:
[ 363.444552] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 363.444559] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 363.444567] [<c012ced8>] ? default_spin_lock_flags+0x8/0x10
[ 363.444573] [<f819cc14>] ar9170_set_slot_time+0x34/0x50 [ar9170usb]
[ 363.444578] [<f819a10f>] ar9170_op_config+0x4f/0xc0 [ar9170usb]
[ 363.444583] [<c0162150>] ? queue_work_on+0x40/0x60
[ 363.444594] [<f995287f>] ieee80211_hw_config+0xaf/0x100 [mac80211]
[ 363.444606] [<f99561c5>] ieee80211_scan_completed+0xc5/0x190 [mac80211]
[ 363.444617] [<f9956511>] ieee80211_scan_state_decision+0x201/0x230 [mac80211]
[ 363.444623] [<f819a0fb>] ? ar9170_op_config+0x3b/0xc0 [ar9170usb]
[ 363.444635] [<f9956f3a>] ieee80211_scan_work+0x26a/0x2f0 [mac80211]
[ 363.444641] [<c0161aee>] run_workqueue+0x8e/0x150
[ 363.444653] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 363.444658] [<c0161c34>] worker_thread+0x84/0xe0
[ 363.444662] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 363.444667] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 363.444671] [<c0165a84>] kthread+0x74/0x80
[ 363.444675] [<c0165a10>] ? kthread+0x0/0x80
[ 363.444679] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 363.444683] phy0: writing reg 0x1c36f0 (val 0x5000) failed
[ 364.444534] usb 2-6: no command feedback received (-110).
[ 364.444540] ar9170 cmd: 10 01 00 00 28 36 1c 00 00 00 00 80 24 36 1c 00 ....(6......$6..
[ 364.444544] ar9170 cmd: 00 00 00 00 ....
[ 364.444549] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 364.444552] Call Trace:
[ 364.444564] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 364.444572] [<f819c48d>] ar9170_update_multicast+0x6d/0x90 [ar9170usb]
[ 364.444578] [<f8199e88>] ar9170_op_configure_filter+0x78/0x100 [ar9170usb]
[ 364.444589] [<f99529d0>] ieee80211_configure_filter+0x100/0x140 [mac80211]
[ 364.444601] [<f9956227>] ieee80211_scan_completed+0x127/0x190 [mac80211]
[ 364.444613] [<f9956511>] ieee80211_scan_state_decision+0x201/0x230 [mac80211]
[ 364.444619] [<f819a0fb>] ? ar9170_op_config+0x3b/0xc0 [ar9170usb]
[ 364.444631] [<f9956f3a>] ieee80211_scan_work+0x26a/0x2f0 [mac80211]
[ 364.444639] [<c0161aee>] run_workqueue+0x8e/0x150
[ 364.444651] [<f9956cd0>] ? ieee80211_scan_work+0x0/0x2f0 [mac80211]
[ 364.444656] [<c0161c34>] worker_thread+0x84/0xe0
[ 364.444660] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 364.444665] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 364.444669] [<c0165a84>] kthread+0x74/0x80
[ 364.444673] [<c0165a10>] ? kthread+0x0/0x80
[ 364.444678] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 365.444028] usb 2-6: no command feedback received (-110).
[ 365.444036] ar9170 cmd: 10 01 00 00 28 36 1c 00 00 00 00 80 24 36 1c 00 ....(6......$6..
[ 365.444039] ar9170 cmd: 00 00 00 00 ....
[ 365.444044] Pid: 1309, comm: phy0 Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 365.444047] Call Trace:
[ 365.444061] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 365.444067] [<f819c48d>] ar9170_update_multicast+0x6d/0x90 [ar9170usb]
[ 365.444073] [<f8199e88>] ar9170_op_configure_filter+0x78/0x100 [ar9170usb]
[ 365.444085] [<f99529d0>] ieee80211_configure_filter+0x100/0x140 [mac80211]
[ 365.444096] [<f9952a22>] ieee80211_reconfig_filter+0x12/0x20 [mac80211]
[ 365.444104] [<c0161aee>] run_workqueue+0x8e/0x150
[ 365.444115] [<f9952a10>] ? ieee80211_reconfig_filter+0x0/0x20 [mac80211]
[ 365.444120] [<c0161c34>] worker_thread+0x84/0xe0
[ 365.444125] [<c0165eb0>] ? autoremove_wake_function+0x0/0x50
[ 365.444130] [<c0161bb0>] ? worker_thread+0x0/0xe0
[ 365.444134] [<c0165a84>] kthread+0x74/0x80
[ 365.444137] [<c0165a10>] ? kthread+0x0/0x80
[ 365.444142] [<c010363e>] kernel_thread_helper+0x6/0x10
[ 366.444025] usb 2-6: no command feedback received (-110).
[ 366.444030] ar9170 cmd: 10 01 00 00 28 36 1c 00 00 00 00 80 24 36 1c 00 ....(6......$6..
[ 366.444034] ar9170 cmd: 00 00 00 00 ....
[ 366.444039] Pid: 1020, comm: NetworkManager Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 366.444042] Call Trace:
[ 366.444052] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 366.444059] [<f819c48d>] ar9170_update_multicast+0x6d/0x90 [ar9170usb]
[ 366.444065] [<f8199e88>] ar9170_op_configure_filter+0x78/0x100 [ar9170usb]
[ 366.444077] [<f99529d0>] ieee80211_configure_filter+0x100/0x140 [mac80211]
[ 366.444090] [<f995fd73>] ieee80211_stop+0x113/0x530 [mac80211]
[ 366.444096] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 366.444102] [<c050e93e>] ? dev_deactivate+0x17e/0x190
[ 366.444109] [<c04f75e6>] __dev_close+0x46/0x80
[ 366.444113] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 366.444118] [<c04f5a9f>] ? dev_set_rx_mode+0x2f/0x40
[ 366.444122] [<c04f5c62>] __dev_change_flags+0x82/0x150
[ 366.444127] [<c04f7473>] dev_change_flags+0x23/0x60
[ 366.444132] [<c05034a1>] do_setlink+0x181/0x6e0
[ 366.444137] [<c0362c86>] ? nla_put+0x36/0x50
[ 366.444142] [<c0362f72>] ? nla_parse+0x22/0xd0
[ 366.444146] [<c0503d67>] rtnl_setlink+0x107/0x150
[ 366.444151] [<c05c82c9>] ? mutex_lock+0x19/0x40
[ 366.444155] [<c050300d>] rtnetlink_rcv_msg+0x13d/0x230
[ 366.444159] [<c05c94ef>] ? _raw_spin_lock_irqsave+0x2f/0x50
[ 366.444164] [<c04f018b>] ? memcpy_toiovec+0x4b/0x70
[ 366.444168] [<c0503c60>] ? rtnl_setlink+0x0/0x150
[ 366.444173] [<c0502ed0>] ? rtnetlink_rcv_msg+0x0/0x230
[ 366.444177] [<c0518266>] netlink_rcv_skb+0x86/0xb0
[ 366.444182] [<c0502ebc>] rtnetlink_rcv+0x1c/0x30
[ 366.444186] [<c0517f59>] netlink_unicast+0x259/0x280
[ 366.444190] [<c0518b58>] netlink_sendmsg+0x1b8/0x290
[ 366.444196] [<c032dec5>] ? apparmor_socket_sendmsg+0x15/0x20
[ 366.444201] [<c04e7a49>] sock_sendmsg+0xd9/0x100
[ 366.444206] [<c04e7a49>] ? sock_sendmsg+0xd9/0x100
[ 366.444210] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 366.444214] [<c04f020a>] ? verify_iovec+0x5a/0xa0
[ 366.444218] [<c04e7ffd>] sys_sendmsg+0x15d/0x290
[ 366.444223] [<c04e7bb5>] ? sys_sendto+0xf5/0x140
[ 366.444228] [<c04e55a8>] ? sock_destroy_inode+0x28/0x30
[ 366.444233] [<c022d0e4>] ? destroy_inode+0x24/0x40
[ 366.444237] [<c02297de>] ? __d_free+0x2e/0x50
[ 366.444242] [<c04e853b>] ? sys_recvmsg+0x3b/0x70
[ 366.444246] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 366.444250] [<c04e870b>] sys_socketcall+0xeb/0x2a0
[ 366.444256] [<c0216d1c>] ? filp_close+0x4c/0x80
[ 366.444260] [<c01502ae>] ? sys_time+0x1e/0x60
[ 366.444264] [<c05c99f4>] syscall_call+0x7/0xb
[ 366.444269] [<c05c0000>] ? detect_extended_topology+0x70/0x193
[ 367.456039] usb 2-6: no command feedback received (-110).
[ 367.456044] ar9170 cmd: 08 01 00 00 8c 36 1c 00 00 00 00 00 .....6......
[ 367.456049] Pid: 1020, comm: NetworkManager Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 367.456052] Call Trace:
[ 367.456063] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 367.456070] [<f819be31>] ar9170_write_reg+0x51/0xb0 [ar9170usb]
[ 367.456085] [<f996ba21>] ? ieee80211_key_todo+0x21/0x30 [mac80211]
[ 367.456091] [<f819cb72>] ar9170_update_frame_filter+0x22/0x40 [ar9170usb]
[ 367.456097] [<f819a1ad>] ar9170_op_remove_interface+0x2d/0x70 [ar9170usb]
[ 367.456109] [<f995fe88>] ieee80211_stop+0x228/0x530 [mac80211]
[ 367.456115] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 367.456121] [<c050e93e>] ? dev_deactivate+0x17e/0x190
[ 367.456127] [<c04f75e6>] __dev_close+0x46/0x80
[ 367.456131] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 367.456136] [<c04f5a9f>] ? dev_set_rx_mode+0x2f/0x40
[ 367.456140] [<c04f5c62>] __dev_change_flags+0x82/0x150
[ 367.456145] [<c04f7473>] dev_change_flags+0x23/0x60
[ 367.456149] [<c05034a1>] do_setlink+0x181/0x6e0
[ 367.456154] [<c0362c86>] ? nla_put+0x36/0x50
[ 367.456159] [<c0362f72>] ? nla_parse+0x22/0xd0
[ 367.456163] [<c0503d67>] rtnl_setlink+0x107/0x150
[ 367.456168] [<c05c82c9>] ? mutex_lock+0x19/0x40
[ 367.456172] [<c050300d>] rtnetlink_rcv_msg+0x13d/0x230
[ 367.456176] [<c05c94ef>] ? _raw_spin_lock_irqsave+0x2f/0x50
[ 367.456181] [<c04f018b>] ? memcpy_toiovec+0x4b/0x70
[ 367.456185] [<c0503c60>] ? rtnl_setlink+0x0/0x150
[ 367.456189] [<c0502ed0>] ? rtnetlink_rcv_msg+0x0/0x230
[ 367.456194] [<c0518266>] netlink_rcv_skb+0x86/0xb0
[ 367.456198] [<c0502ebc>] rtnetlink_rcv+0x1c/0x30
[ 367.456203] [<c0517f59>] netlink_unicast+0x259/0x280
[ 367.456207] [<c0518b58>] netlink_sendmsg+0x1b8/0x290
[ 367.456212] [<c032dec5>] ? apparmor_socket_sendmsg+0x15/0x20
[ 367.456217] [<c04e7a49>] sock_sendmsg+0xd9/0x100
[ 367.456221] [<c04e7a49>] ? sock_sendmsg+0xd9/0x100
[ 367.456226] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 367.456230] [<c04f020a>] ? verify_iovec+0x5a/0xa0
[ 367.456234] [<c04e7ffd>] sys_sendmsg+0x15d/0x290
[ 367.456239] [<c04e7bb5>] ? sys_sendto+0xf5/0x140
[ 367.456243] [<c04e55a8>] ? sock_destroy_inode+0x28/0x30
[ 367.456248] [<c022d0e4>] ? destroy_inode+0x24/0x40
[ 367.456252] [<c02297de>] ? __d_free+0x2e/0x50
[ 367.456257] [<c04e853b>] ? sys_recvmsg+0x3b/0x70
[ 367.456261] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 367.456265] [<c04e870b>] sys_socketcall+0xeb/0x2a0
[ 367.456270] [<c0216d1c>] ? filp_close+0x4c/0x80
[ 367.456275] [<c01502ae>] ? sys_time+0x1e/0x60
[ 367.456279] [<c05c99f4>] syscall_call+0x7/0xb
[ 367.456284] [<c05c0000>] ? detect_extended_topology+0x70/0x193
[ 367.456288] phy0: writing reg 0x1c368c (val 0x0) failed
[ 368.456025] usb 2-6: no command feedback received (-110).
[ 368.456030] ar9170 cmd: 10 01 00 00 24 35 1c 00 00 00 00 00 20 35 1c 00 ....$5...... 5..
[ 368.456033] ar9170 cmd: 00 00 00 00 ....
[ 368.456037] Pid: 1020, comm: NetworkManager Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 368.456040] Call Trace:
[ 368.456049] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 368.456056] [<f819c53d>] ar9170_set_beacon_timers+0x8d/0xd0 [ar9170usb]
[ 368.456061] [<f819a1b4>] ar9170_op_remove_interface+0x34/0x70 [ar9170usb]
[ 368.456075] [<f995fe88>] ieee80211_stop+0x228/0x530 [mac80211]
[ 368.456080] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 368.456085] [<c050e93e>] ? dev_deactivate+0x17e/0x190
[ 368.456091] [<c04f75e6>] __dev_close+0x46/0x80
[ 368.456095] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 368.456100] [<c04f5a9f>] ? dev_set_rx_mode+0x2f/0x40
[ 368.456104] [<c04f5c62>] __dev_change_flags+0x82/0x150
[ 368.456109] [<c04f7473>] dev_change_flags+0x23/0x60
[ 368.456114] [<c05034a1>] do_setlink+0x181/0x6e0
[ 368.456119] [<c0362c86>] ? nla_put+0x36/0x50
[ 368.456124] [<c0362f72>] ? nla_parse+0x22/0xd0
[ 368.456128] [<c0503d67>] rtnl_setlink+0x107/0x150
[ 368.456133] [<c05c82c9>] ? mutex_lock+0x19/0x40
[ 368.456137] [<c050300d>] rtnetlink_rcv_msg+0x13d/0x230
[ 368.456141] [<c05c94ef>] ? _raw_spin_lock_irqsave+0x2f/0x50
[ 368.456146] [<c04f018b>] ? memcpy_toiovec+0x4b/0x70
[ 368.456150] [<c0503c60>] ? rtnl_setlink+0x0/0x150
[ 368.456154] [<c0502ed0>] ? rtnetlink_rcv_msg+0x0/0x230
[ 368.456159] [<c0518266>] netlink_rcv_skb+0x86/0xb0
[ 368.456163] [<c0502ebc>] rtnetlink_rcv+0x1c/0x30
[ 368.456168] [<c0517f59>] netlink_unicast+0x259/0x280
[ 368.456172] [<c0518b58>] netlink_sendmsg+0x1b8/0x290
[ 368.456177] [<c032dec5>] ? apparmor_socket_sendmsg+0x15/0x20
[ 368.456182] [<c04e7a49>] sock_sendmsg+0xd9/0x100
[ 368.456186] [<c04e7a49>] ? sock_sendmsg+0xd9/0x100
[ 368.456191] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 368.456195] [<c04f020a>] ? verify_iovec+0x5a/0xa0
[ 368.456199] [<c04e7ffd>] sys_sendmsg+0x15d/0x290
[ 368.456204] [<c04e7bb5>] ? sys_sendto+0xf5/0x140
[ 368.456209] [<c04e55a8>] ? sock_destroy_inode+0x28/0x30
[ 368.456213] [<c022d0e4>] ? destroy_inode+0x24/0x40
[ 368.456217] [<c02297de>] ? __d_free+0x2e/0x50
[ 368.456221] [<c04e853b>] ? sys_recvmsg+0x3b/0x70
[ 368.456225] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 368.456230] [<c04e870b>] sys_socketcall+0xeb/0x2a0
[ 368.456235] [<c0216d1c>] ? filp_close+0x4c/0x80
[ 368.456239] [<c01502ae>] ? sys_time+0x1e/0x60
[ 368.456243] [<c05c99f4>] syscall_call+0x7/0xb
[ 368.456248] [<c05c0000>] ? detect_extended_topology+0x70/0x193
[ 369.456529] usb 2-6: no command feedback received (-110).
[ 369.456534] ar9170 cmd: 10 01 00 00 10 36 1c 00 00 00 00 00 14 36 1c 00 .....6.......6..
[ 369.456537] ar9170 cmd: 00 00 00 00 ....
[ 369.456541] Pid: 1020, comm: NetworkManager Tainted: P 2.6.35-23-generic #41-Ubuntu
[ 369.456544] Call Trace:
[ 369.456553] [<f8198d99>] ar9170_usb_exec_cmd+0x1b9/0x200 [ar9170usb]
[ 369.456560] [<f819cd16>] ar9170_set_operating_mode+0x96/0x310 [ar9170usb]
[ 369.456566] [<f819a1de>] ar9170_op_remove_interface+0x5e/0x70 [ar9170usb]
[ 369.456579] [<f995fe88>] ieee80211_stop+0x228/0x530 [mac80211]
[ 369.456584] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 369.456590] [<c050e93e>] ? dev_deactivate+0x17e/0x190
[ 369.456596] [<c04f75e6>] __dev_close+0x46/0x80
[ 369.456600] [<c05c9736>] ? _raw_spin_unlock_bh+0x16/0x20
[ 369.456605] [<c04f5a9f>] ? dev_set_rx_mode+0x2f/0x40
[ 369.456609] [<c04f5c62>] __dev_change_flags+0x82/0x150
[ 369.456614] [<c04f7473>] dev_change_flags+0x23/0x60
[ 369.456619] [<c05034a1>] do_setlink+0x181/0x6e0
[ 369.456623] [<c0362c86>] ? nla_put+0x36/0x50
[ 369.456628] [<c0362f72>] ? nla_parse+0x22/0xd0
[ 369.456632] [<c0503d67>] rtnl_setlink+0x107/0x150
[ 369.456637] [<c05c82c9>] ? mutex_lock+0x19/0x40
[ 369.456641] [<c050300d>] rtnetlink_rcv_msg+0x13d/0x230
[ 369.456645] [<c05c94ef>] ? _raw_spin_lock_irqsave+0x2f/0x50
[ 369.456649] [<c04f018b>] ? memcpy_toiovec+0x4b/0x70
[ 369.456654] [<c0503c60>] ? rtnl_setlink+0x0/0x150
[ 369.456658] [<c0502ed0>] ? rtnetlink_rcv_msg+0x0/0x230
[ 369.456663] [<c0518266>] netlink_rcv_skb+0x86/0xb0
[ 369.456667] [<c0502ebc>] rtnetlink_rcv+0x1c/0x30
[ 369.456671] [<c0517f59>] netlink_unicast+0x259/0x280
[ 369.456676] [<c0518b58>] netlink_sendmsg+0x1b8/0x290
[ 369.456681] [<c032dec5>] ? apparmor_socket_sendmsg+0x15/0x20
[ 369.456686] [<c04e7a49>] sock_sendmsg+0xd9/0x100
[ 369.456690] [<c04e7a49>] ? sock_sendmsg+0xd9/0x100
[ 369.456695] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 369.456699] [<c04f020a>] ? verify_iovec+0x5a/0xa0
[ 369.456703] [<c04e7ffd>] sys_sendmsg+0x15d/0x290
[ 369.456708] [<c04e7bb5>] ? sys_sendto+0xf5/0x140
[ 369.456712] [<c04e55a8>] ? sock_destroy_inode+0x28/0x30
[ 369.456717] [<c022d0e4>] ? destroy_inode+0x24/0x40
[ 369.456721] [<c02297de>] ? __d_free+0x2e/0x50
[ 369.456725] [<c04e853b>] ? sys_recvmsg+0x3b/0x70
[ 369.456729] [<c035a87d>] ? _copy_from_user+0x3d/0x130
[ 369.456734] [<c04e870b>] sys_socketcall+0xeb/0x2a0
[ 369.456738] [<c0216d1c>] ? filp_close+0x4c/0x80
[ 369.456743] [<c01502ae>] ? sys_time+0x1e/0x60
[ 369.456747] [<c05c99f4>] syscall_call+0x7/0xb
[ 369.456751] [<c05c0000>] ? detect_extended_topology+0x70/0x193
[ 370.456029] phy0: writing reg 0x1d0104 (val 0x0) failed
[ 371.456027] phy0: writing reg 0x1c3d30 (val 0x0) failed
[ 371.502898] usb 2-6: kill pending tx urbs.
[ 383.940720] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 383.996080] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 383.996356] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 385.996027] usb 2-6: USB setup failed (-110).
[ 881.532025] usb 2-6: USB setup failed (-110).
[ 1130.636044] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 1130.770966] scsi7 : usb-storage 1-5:1.0
[ 1131.768724] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 1131.769351] sd 7:0:0:0: Attached scsi generic sg9 type 0
[ 1131.771823] sd 7:0:0:0: [sdh] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 1131.772847] sd 7:0:0:0: [sdh] Write Protect is off
[ 1131.772852] sd 7:0:0:0: [sdh] Mode Sense: 23 00 00 00
[ 1131.772855] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[ 1131.775196] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[ 1131.775203] sdh: sdh1
[ 1131.875316] sd 7:0:0:0: [sdh] Assuming drive cache: write through
[ 1131.875321] sd 7:0:0:0: [sdh] Attached SCSI removable disk
[ 1161.839200] usb 1-5: USB disconnect, address 3
dopa@dopa-HP-Compaq-dx7500-Microtower:~$