Ubuntu-gr Forum

Γιάσας και πάλι
Αντε να δούμε το μέγεθος της πατάτας που κάνω.
Εδώ είναι τα απτελέσματα των εντολών.

Κώδικας: Επιλογή όλων


george@foritos:~$ lsusb
Bus 005 Device 002: ID 0bda:8187 Realtek Semiconductor Corp.
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
george@foritos:~$


Κώδικας: Επιλογή όλων

george@foritos:~$ lsmod
Module Size Used by
isofs 36388 1
udf 88612 0
binfmt_misc 12808 1
rfcomm 41744 2
l2cap 25728 13 rfcomm
bluetooth 61156 4 rfcomm,l2cap
ppdev 10372 0
ipv6 267780 10
acpi_cpufreq 10796 0
cpufreq_userspace 5284 0
cpufreq_powersave 2688 0
cpufreq_ondemand 9740 2
cpufreq_conservative 8712 0
cpufreq_stats 7104 0
freq_table 5536 3 acpi_cpufreq,cpufreq_ondemand,cpufreq_stats
container 5632 0
sbs 15112 0
sbshc 7680 1 sbs
dock 11280 0
iptable_filter 3840 0
ip_tables 14820 1 iptable_filter
x_tables 16132 1 ip_tables
aes_i586 33536 0
dm_crypt 15364 0
af_packet 23812 2
parport_pc 36260 0
lp 12324 0
parport 37832 3 ppdev,parport_pc,lp
joydev 13120 0
snd_hda_intel 344728 2
snd_pcm_oss 42144 0
snd_mixer_oss 17920 1 snd_pcm_oss
serio_raw 7940 0
iwl3945 89844 0
iwlwifi_mac80211 219108 1 iwl3945
nvidia 7825536 36
psmouse 40336 0
snd_pcm 78596 2 snd_hda_intel,snd_pcm_oss
evdev 13056 8
eeprom_93cx6 3200 0
pcspkr 4224 0
i2c_core 24832 1 nvidia
iTCO_wdt 13092 0
iTCO_vendor_support 4868 1 iTCO_wdt
sky2 47492 0
cfg80211 15112 1 iwlwifi_mac80211
snd_page_alloc 11400 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
snd_seq_dummy 4868 0
snd_seq_oss 35584 0
snd_seq_midi 9376 0
snd_rawmidi 25760 1 snd_seq_midi
snd_seq_midi_event 8320 2 snd_seq_oss,snd_seq_midi
snd_seq 54224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24836 2 snd_pcm,snd_seq
snd_seq_device 9612 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
video 19856 0
output 4736 1 video
snd 56996 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
battery 14212 0
intel_agp 25492 0
ac 6916 0
button 9232 0
soundcore 8800 1 snd
agpgart 34760 2 nvidia,intel_agp
shpchp 34452 0
pci_hotplug 30880 1 shpchp
dm_multipath 20872 0
dm_mod 62660 2 dm_crypt,dm_multipath
ext3 136712 2
jbd 48404 1 ext3
mbcache 9600 1 ext3
sg 36880 0
sr_mod 17956 1
cdrom 37408 1 sr_mod
sd_mod 30720 4
ata_piix 19588 4
pata_acpi 8320 0
ata_generic 8324 0
libata 159344 3 ata_piix,pata_acpi,ata_generic
scsi_mod 151436 4 sg,sr_mod,sd_mod,libata
ehci_hcd 37900 0
uhci_hcd 27024 0
usbcore 146028 3 ehci_hcd,uhci_hcd
thermal 16796 0
processor 36872 4 acpi_cpufreq,thermal
fan 5636 0
fbcon 42912 0
tileblit 3456 1 fbcon
font 9472 1 fbcon
bitblit 6784 1 fbcon
softcursor 3072 1 bitblit
fuse 50708 3


Κώδικας: Επιλογή όλων

george@foritos:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Aug 20 22:56:21 UTC 2008 (Ubuntu 2.6.24-19.41-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable)
[ 0.000000] BIOS-e820: 000000003fe90000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7660
[ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261776
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261776
[ 0.000000] On node 0 totalpages: 261776
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32147 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7530 checksum 0
[ 0.000000] ACPI: RSDP 000F7530, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FE9190F, 0044 (r1 GATEWA M 6040000 LTP 0)
[ 0.000000] ACPI: FACP 3FE97CAA, 0074 (r1 GATEWA M 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3FE9231B, 598F (r1 GATEWA M 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FE98FC0, 0040
[ 0.000000] ACPI: APIC 3FE97D1E, 0068 (r1 GATEWA M 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3FE97D86, 0038 (r1 GATEWA M 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3FE97DBE, 003C (r1 GATEWA M 6040000 LOHR 5A)
[ 0.000000] ACPI: APIC 3FE97DFA, 0068 (r1 GATEWA M 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FE97E62, 0028 (r1 GATEWA M 6040000 LTP 1)
[ 0.000000] ACPI: SLIC 3FE97E8A, 0176 (r1 GATEWA M 6040000 LTP 0)
[ 0.000000] ACPI: SSDT 3FE91953, 0500 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259731
[ 0.000000] Kernel command line: root=UUID=4566baf1-6c7b-4a74-af0c-a277880e98ee ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1995.830 MHz processor.
[ 21.903909] Console: colour VGA+ 80x25
[ 21.903912] console [tty0] enabled
[ 21.904186] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 21.904452] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 21.924668] Memory: 1025576k/1047104k available (2177k kernel code, 20904k reserved, 1006k data, 368k init, 129600k highmem)
[ 21.924674] virtual kernel memory layout:
[ 21.924675] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 21.924676] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 21.924677] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 21.924677] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 21.924678] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 21.924679] .data : 0xc03204c4 - 0xc041bdc4 (1006 kB)
[ 21.924680] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 21.924683] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 21.924713] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 21.924839] hpet clockevent registered
[ 22.004830] Calibrating delay using timer specific routine.. 3995.99 BogoMIPS (lpj=7991983)
[ 22.004848] Security Framework initialized
[ 22.004852] SELinux: Disabled at boot.
[ 22.004862] AppArmor: AppArmor initialized
[ 22.004866] Failure registering capabilities with primary security module.
[ 22.004872] Mount-cache hash table entries: 512
[ 22.004971] Initializing cgroup subsys ns
[ 22.004975] Initializing cgroup subsys cpuacct
[ 22.004984] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 22.004990] monitor/mwait feature present.
[ 22.004991] using mwait in idle threads.
[ 22.004994] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.004996] CPU: L2 cache: 4096K
[ 22.004998] CPU: Physical Processor ID: 0
[ 22.005000] CPU: Processor Core ID: 0
[ 22.005001] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 22.005009] Compat vDSO mapped to ffffe000.
[ 22.005019] Checking 'hlt' instruction... OK.
[ 22.021178] SMP alternatives: switching to UP code
[ 22.022616] Early unpacking initramfs... done
[ 22.326257] ACPI: Core revision 20070126
[ 22.326299] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 22.333186] CPU0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 22.333201] SMP alternatives: switching to SMP code
[ 22.333833] Booting processor 1/1 eip 3000
[ 22.344257] Initializing CPU#1
[ 22.424745] Calibrating delay using timer specific routine.. 3991.49 BogoMIPS (lpj=7982980)
[ 22.424751] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000000
[ 22.424756] monitor/mwait feature present.
[ 22.424759] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 22.424760] CPU: L2 cache: 4096K
[ 22.424762] CPU: Physical Processor ID: 0
[ 22.424763] CPU: Processor Core ID: 1
[ 22.424764] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000000
[ 22.425457] CPU1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz stepping 06
[ 22.425478] Total of 2 processors activated (7987.48 BogoMIPS).
[ 22.425674] ENABLING IO-APIC IRQs
[ 22.425860] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 22.572823] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 22.662274] Brought up 2 CPUs
[ 22.662297] CPU0 attaching sched-domain:
[ 22.662299] domain 0: span 03
[ 22.662301] groups: 01 02
[ 22.662303] CPU1 attaching sched-domain:
[ 22.662305] domain 0: span 03
[ 22.662306] groups: 02 01
[ 22.662534] net_namespace: 64 bytes
[ 22.662543] Booting paravirtualized kernel on bare hardware
[ 22.662952] Time: 10:07:36 Date: 11/08/08
[ 22.662977] NET: Registered protocol family 16
[ 22.663169] EISA bus registered
[ 22.663173] ACPI: bus type pci registered
[ 22.663354] PCI: PCI BIOS revision 2.10 entry at 0xfd89b, last bus=5
[ 22.663356] PCI: Using configuration type 1
[ 22.663371] Setting up standard PCI resources
[ 22.667011] ACPI: EC: Look up EC in DSDT
[ 22.668376] ACPI: BIOS _OSI(Linux) query ignored
[ 22.668378] ACPI: DMI System Vendor: Intel Corporation
[ 22.668379] ACPI: DMI Product Name: Calistoga & ICH7M Chipset
[ 22.668381] ACPI: DMI Product Version: Not Applicable
[ 22.668382] ACPI: DMI Board Name: MPAD-MSAE Customer Reference Boards
[ 22.668384] ACPI: DMI BIOS Vendor: Phoenix Technologies LTD
[ 22.668385] ACPI: DMI BIOS Date: 11/03/2006
[ 22.668386] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 22.668388] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 22.668618] ACPI: Interpreter enabled
[ 22.668621] ACPI: (supports S0 S3 S4 S5)
[ 22.668632] ACPI: Using IOAPIC for interrupt routing
[ 22.668890] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 22.674449] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 22.674451] ACPI: EC: driver started in interrupt mode
[ 22.674490] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 22.675242] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 22.675246] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 22.676298] PCI: Transparent bridge - 0000:00:1e.0
[ 22.676342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 22.676595] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 22.676702] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 22.676806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 22.676905] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 22.677012] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 22.679047] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 22.679130] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 22.679210] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 22.679289] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 22.679369] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 22.679449] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 22.679529] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 22.679611] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[ 22.679740] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 22.679771] pnp: PnP ACPI init
[ 22.679777] ACPI: bus type pnp registered
[ 22.682795] pnp: PnP ACPI: found 9 devices
[ 22.682797] ACPI: ACPI bus type pnp unregistered
[ 22.682801] PnPBIOS: Disabled by ACPI PNP
[ 22.683034] PCI: Using ACPI for IRQ routing
[ 22.683037] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 22.714265] NET: Registered protocol family 8
[ 22.714267] NET: Registered protocol family 20
[ 22.714300] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 22.714304] hpet0: 3 64-bit timers, 14318180 Hz
[ 22.715333] AppArmor: AppArmor Filesystem Enabled
[ 22.716695] Time: tsc clocksource has been installed.
[ 22.716707] Switched to high resolution mode on CPU 0
[ 22.718257] Switched to high resolution mode on CPU 1
[ 22.729691] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 22.729694] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 22.729696] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 22.729699] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 22.729701] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 22.729704] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 22.729706] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 22.729713] system 00:05: ioport range 0x800-0x80f has been reserved
[ 22.729715] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 22.729717] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 22.760119] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 22.760121] PCI: Bridge: 0000:00:01.0
[ 22.760123] IO window: disabled.
[ 22.760126] MEM window: dc000000-ddffffff
[ 22.760129] PREFETCH window: c0000000-cfffffff
[ 22.760132] PCI: Bridge: 0000:00:1c.0
[ 22.760135] IO window: 2000-2fff
[ 22.760140] MEM window: d6000000-d7ffffff
[ 22.760145] PREFETCH window: d0000000-d1ffffff
[ 22.760150] PCI: Bridge: 0000:00:1c.1
[ 22.760153] IO window: 3000-3fff
[ 22.760158] MEM window: d8000000-d9ffffff
[ 22.760162] PREFETCH window: d2000000-d3ffffff
[ 22.760168] PCI: Bridge: 0000:00:1c.2
[ 22.760171] IO window: 4000-4fff
[ 22.760176] MEM window: da000000-dbffffff
[ 22.760180] PREFETCH window: d4000000-d5ffffff
[ 22.760186] PCI: Bridge: 0000:00:1e.0
[ 22.760187] IO window: disabled.
[ 22.760192] MEM window: disabled.
[ 22.760196] PREFETCH window: disabled.
[ 22.760212] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.760217] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 22.760239] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 22.760244] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 22.760267] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 22.760272] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 22.760295] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.760300] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 22.760313] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 22.760323] NET: Registered protocol family 2
[ 22.797699] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 22.797888] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 22.798285] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 22.798488] TCP: Hash tables configured (established 131072 bind 65536)
[ 22.798490] TCP reno registered
[ 22.809752] checking if image is initramfs... it is
[ 23.405413] Freeing initrd memory: 7734k freed
[ 23.405639] Simple Boot Flag value 0x82 read from CMOS RAM was invalid
[ 23.405641] Simple Boot Flag at 0x36 set to 0x1
[ 23.406280] audit: initializing netlink socket (disabled)
[ 23.406296] audit(1226138856.284:1): initialized
[ 23.406481] highmem bounce pool size: 64 pages
[ 23.408359] VFS: Disk quotas dquot_6.5.1
[ 23.408426] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 23.408563] io scheduler noop registered
[ 23.408565] io scheduler anticipatory registered
[ 23.408567] io scheduler deadline registered
[ 23.408577] io scheduler cfq registered (default)
[ 23.408687] Boot video device is 0000:01:00.0
[ 23.408786] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 23.408822] assign_interrupt_mode Found MSI capability
[ 23.408852] Allocate Port Service[0000:00:01.0:pcie00]
[ 23.408932] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 23.408988] assign_interrupt_mode Found MSI capability
[ 23.409033] Allocate Port Service[0000:00:1c.0:pcie00]
[ 23.409064] Allocate Port Service[0000:00:1c.0:pcie02]
[ 23.409163] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 23.409219] assign_interrupt_mode Found MSI capability
[ 23.409263] Allocate Port Service[0000:00:1c.1:pcie00]
[ 23.409294] Allocate Port Service[0000:00:1c.1:pcie02]
[ 23.409392] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 23.409448] assign_interrupt_mode Found MSI capability
[ 23.409493] Allocate Port Service[0000:00:1c.2:pcie00]
[ 23.409525] Allocate Port Service[0000:00:1c.2:pcie02]
[ 23.409778] isapnp: Scanning for PnP cards...
[ 23.763871] isapnp: No Plug & Play device found
[ 23.787265] Real Time Clock Driver v1.12ac
[ 23.787492] hpet_resources: 0xfed00000 is busy
[ 23.787520] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 23.788662] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 23.788723] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 23.788813] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2Q] at 0x60,0x64 irq 1,12
[ 23.790845] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 23.790850] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 23.808552] mice: PS/2 mouse device common for all mice
[ 23.808655] EISA: Probing bus 0 at eisa.0
[ 23.808661] Cannot allocate resource for EISA slot 1
[ 23.808663] Cannot allocate resource for EISA slot 2
[ 23.808665] Cannot allocate resource for EISA slot 3
[ 23.808666] Cannot allocate resource for EISA slot 4
[ 23.808683] EISA: Detected 0 cards.
[ 23.808686] cpuidle: using governor ladder
[ 23.808688] cpuidle: using governor menu
[ 23.808761] NET: Registered protocol family 1
[ 23.808787] Using IPI No-Shortcut mode
[ 23.808815] registered taskstats version 1
[ 23.808904] Magic number: 0:754:122
[ 23.808959] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 23.808960] EDD information not available.
[ 23.809154] Freeing unused kernel memory: 368k freed
[ 23.837779] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 24.993741] fuse init (API version 7.9)
[ 25.011540] ACPI: SSDT 3FE920A8, 01EA (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 25.011959] ACPI: SSDT 3FE91E53, 01D0 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 25.012354] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 25.012358] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 25.012547] ACPI: SSDT 3FE92292, 0089 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 25.012711] ACPI: SSDT 3FE92023, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
[ 25.013158] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 25.013163] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 25.017860] ACPI: Thermal Zone [TZ00] (56 C)
[ 25.323412] usbcore: registered new interface driver usbfs
[ 25.323434] usbcore: registered new interface driver hub
[ 25.323723] usbcore: registered new device driver usb
[ 25.324968] USB Universal Host Controller Interface driver v3.0
[ 25.325032] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 25.325045] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 25.325050] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 25.325292] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 25.325324] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 25.325443] usb usb1: configuration #1 chosen from 1 choice
[ 25.325465] hub 1-0:1.0: USB hub found
[ 25.325469] hub 1-0:1.0: 2 ports detected
[ 25.410886] SCSI subsystem initialized
[ 25.417504] libata version 3.00 loaded.
[ 25.428261] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 25.428271] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 25.428275] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 25.428294] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 25.428325] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 25.428421] usb usb2: configuration #1 chosen from 1 choice
[ 25.428441] hub 2-0:1.0: USB hub found
[ 25.428445] hub 2-0:1.0: 2 ports detected
[ 25.532233] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 25.532243] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 25.532249] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 25.532268] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 25.532297] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 25.532394] usb usb3: configuration #1 chosen from 1 choice
[ 25.532415] hub 3-0:1.0: USB hub found
[ 25.532419] hub 3-0:1.0: 2 ports detected
[ 25.636256] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 25.636266] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 25.636270] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 25.636289] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 25.636318] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 25.636418] usb usb4: configuration #1 chosen from 1 choice
[ 25.636438] hub 4-0:1.0: USB hub found
[ 25.636442] hub 4-0:1.0: 2 ports detected
[ 25.742088] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 25.742099] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 25.742103] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 25.742123] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 25.746040] ehci_hcd 0000:00:1d.7: debug port 1
[ 25.746046] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 25.746051] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde204000
[ 25.761109] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 25.761203] usb usb5: configuration #1 chosen from 1 choice
[ 25.761224] hub 5-0:1.0: USB hub found
[ 25.761229] hub 5-0:1.0: 8 ports detected
[ 25.865239] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 25.865272] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.865285] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 25.867456] ata_piix 0000:00:1f.2: version 2.12
[ 25.867461] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 25.867478] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 25.867501] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 25.867575] scsi0 : ata_piix
[ 25.867615] scsi1 : ata_piix
[ 25.867663] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 25.867665] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 26.028434] ata1.00: ATA-8: WDC WD3200BEVT-60ZCT0, 11.01A11, max UDMA/100
[ 26.028441] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 26.036426] ata1.00: configured for UDMA/100
[ 26.120057] Clocksource tsc unstable (delta = -4492611981 ns)
[ 26.124075] Time: hpet clocksource has been installed.
[ 26.124604] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 26.262939] usb 5-5: configuration #1 chosen from 1 choice
[ 26.350004] ata2.00: ATAPI: PHILIPS DVD+/-RW SDVD8820, AX02, max UDMA/33
[ 26.418025] ata2.00: configured for UDMA/33
[ 26.418204] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-6 11.0 PQ: 0 ANSI: 5
[ 26.418960] scsi 1:0:0:0: CD-ROM PHILIPS DVD+-RW SDVD8820 AX02 PQ: 0 ANSI: 5
[ 26.424173] Driver 'sd' needs updating - please use bus_type methods
[ 26.424227] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 26.424238] sd 0:0:0:0: [sda] Write Protect is off
[ 26.424240] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.424254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.424296] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 26.424305] sd 0:0:0:0: [sda] Write Protect is off
[ 26.424307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 26.424321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 26.424324] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 26.469281] sda2 sda3 < sda5 sda6 sda7 sda8 sda9 >
[ 26.530565] sd 0:0:0:0: [sda] Attached SCSI disk
[ 26.534625] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 26.534641] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 29.090798] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 29.090804] Uniform CD-ROM driver Revision: 3.20
[ 29.090882] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 29.145544] Attempting manual resume
[ 29.145546] swsusp: Resume From Partition 8:9
[ 29.145548] PM: Checking swsusp image.
[ 29.145766] PM: Resume from disk failed.
[ 29.213181] kjournald starting. Commit interval 5 seconds
[ 29.213218] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.890385] device-mapper: uevent: version 1.0.3
[ 37.890412] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 38.070009] device-mapper: multipath: version 1.0.5 loaded
[ 38.090052] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 38.113440] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 38.190025] Linux agpgart interface v0.102
[ 38.322065] input: Power Button (FF) as /devices/virtual/input/input2
[ 38.340965] ACPI: Power Button (FF) [PWRF]
[ 38.341028] input: Power Button (CM) as /devices/virtual/input/input3
[ 38.373004] ACPI: Power Button (CM) [PWRB]
[ 38.373055] input: Sleep Button (CM) as /devices/virtual/input/input4
[ 38.408944] ACPI: Sleep Button (CM) [SLPB]
[ 38.409006] input: Lid Switch as /devices/virtual/input/input5
[ 38.409313] ACPI: Lid Switch [LID]
[ 38.410275] ACPI: AC Adapter [ACAD] (on-line)
[ 38.535157] ACPI: Battery Slot [BAT1] (battery present)
[ 38.592279] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 38.617907] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 38.618448] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 38.645885] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 39.325808] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 39.325823] PCI: Setting latency timer of device 0000:04:00.0 to 64
[ 39.325852] sky2 0000:04:00.0: v1.20 addr 0xda000000 irq 18 Yukon-EC Ultra (0xb4) rev 2
[ 39.326272] sky2 eth0: addr 00:16:36:cb:59:1f
[ 39.346483] iTCO_vendor_support: vendor-support=0
[ 39.357740] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 39.357812] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 39.357847] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 39.412617] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 39.556487] nvidia: module license 'NVIDIA' taints kernel.
[ 39.866996] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 39.867006] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 39.867129] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 39.978876] intel_rng: FWH not detected
[ 40.003409] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 40.003412] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 40.003557] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.003572] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 40.003591] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 40.025703] sky2 eth0: enabling interface
[ 40.130359] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[ 40.162822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 40.284737] ieee80211_init: failed to initialize WME (err=-17)
[ 40.315300] iwl3945: Radio Frequency Kill Switch is On:
[ 40.315302] Kill switch must be turned off for wireless networking to work.
[ 40.320499] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 40.330560] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 40.350551] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 40.378071] iwl3945: WARNING: Requesting MAC access during RFKILL wakes up NIC
[ 40.398142] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 40.398170] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 40.398222] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 40.436965] rtl8187: Unknown symbol ieee80211_free_hw
[ 40.437041] rtl8187: Unknown symbol ieee80211_alloc_hw
[ 40.437084] rtl8187: Unknown symbol ieee80211_register_hw
[ 40.437158] rtl8187: Unknown symbol ieee80211_tx_status_irqsafe
[ 40.437515] rtl8187: Unknown symbol ieee80211_unregister_hw
[ 40.437611] rtl8187: Unknown symbol ieee80211_register_hwmode
[ 40.437657] rtl8187: Unknown symbol ieee80211_rx_irqsafe
[ 40.437721] rtl8187: Unknown symbol ieee80211_rts_duration
[ 40.624353] lp: driver loaded but no devices found
[ 40.703594] Adding 2000052k swap on /dev/sda9. Priority:-1 extents:1 across:2000052k
[ 41.039071] EXT3 FS on sda7, internal journal
[ 41.175269] NET: Registered protocol family 17
[ 41.931746] kjournald starting. Commit interval 5 seconds
[ 41.932080] EXT3 FS on sda8, internal journal
[ 41.932088] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.181826] sky2 eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 42.487952] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 43.705605] ACPI: ACPI Dock Station Driver
[ 44.902217] NET: Registered protocol family 10
[ 44.902429] lo: Disabled Privacy Extensions
[ 45.323469] apm: BIOS not found.
[ 47.355694] ppdev: user-space parallel port driver
[ 47.699657] audit(1226131687.600:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5382 profile="/usr/sbin/cupsd" namespace="default"
[ 55.297658] eth0: no IPv6 routers present
[ 58.618963] Bluetooth: Core ver 2.11
[ 58.619099] NET: Registered protocol family 31
[ 58.619102] Bluetooth: HCI device and connection manager initialized
[ 58.619108] Bluetooth: HCI socket layer initialized
[ 58.686590] Bluetooth: L2CAP ver 2.9
[ 58.686597] Bluetooth: L2CAP socket layer initialized
[ 58.849689] Bluetooth: RFCOMM socket layer initialized
[ 58.849705] Bluetooth: RFCOMM TTY layer initialized
[ 58.849708] Bluetooth: RFCOMM ver 1.8
[ 83.286595] CPU0 attaching NULL sched-domain.
[ 83.286604] CPU1 attaching NULL sched-domain.
[ 83.295167] CPU0 attaching sched-domain:
[ 83.295176] domain 0: span 03
[ 83.295179] groups: 01 02
[ 83.295185] CPU1 attaching sched-domain:
[ 83.295187] domain 0: span 03
[ 83.295190] groups: 02 01
[ 92.369006] UDF-fs: No VRS found
[ 92.393140] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 92.394356] ISOFS: changing to secondary root


Κώδικας: Επιλογή όλων

george@foritos:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:16:36:cb:59:1f
inet addr:10.0.0.2 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::216:36ff:febc:95f1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:894 errors:0 dropped:0 overruns:0 frame:0
TX packets:708 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:231486 (226.0 KB) TX bytes:127189 (124.2 KB)
Interrupt:18

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2254 errors:0 dropped:0 overruns:0 frame:0
TX packets:2254 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:112700 (110.0 KB) TX bytes:112700 (110.0 KB)



Κώδικας: Επιλογή όλων



george@foritos:~$ iwconfig
lo no wireless extensions.

eth0 no wireless extensions.

george@foritos:~$ iwlist scan
lo Interface doesn't support scanning.

eth0 Interface doesn't support scanning.

george@foritos:~$


Από ότι βλέπω κάτι βρίσκει....

Γιάσας προς το παρόν.
Γιώργος - sv9cag