Δημοσιεύτηκε: 25 Οκτ 2012, 13:40
Ακολουθησα τις συμβουλες σου, αλλα αυτη την φορα δεν ανοιξε παραθυρο για να βαλω το pin..
Μηπως εχει σχεση οτι σβησαμε το αρχειο που μου ειχες δωσει?
Μηπως εχει σχεση οτι σβησαμε το αρχειο που μου ειχες δωσει?
- Κώδικας: Επιλογή όλων
tester@tester-desktop:~$ sudo usb_modeswitch -W -v 19d2 -p 1514 -M "5553424348c4758600000000000010ff00000000000000000000000000000000"
Taking all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 1.2.3 (C) Josua Dietze 2012
* Based on libusb0 (0.1.12 and above)
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x19d2
DefaultProduct= 0x1514
TargetVendor= not set
TargetProduct= not set
TargetClass= not set
TargetProductList=""
DetachStorageOnly=0
HuaweiMode=0
SierraMode=0
SonyMode=0
QisdaMode=0
GCTMode=0
KobilMode=0
SequansMode=0
MobileActionMode=0
CiscoMode=0
MessageEndpoint= not set
MessageContent="5553424348c4758600000000000010ff00000000000000000000000000000000"
NeedResponse=0
ResponseEndpoint= not set
InquireDevice enabled (default)
Success check disabled
System integration mode disabled
usb_set_debug: Setting debugging level to 15 (on)
usb_os_find_busses: Found 005
usb_os_find_busses: Found 004
usb_os_find_busses: Found 003
usb_os_find_busses: Found 002
usb_os_find_busses: Found 001
usb_os_find_devices: Found 001 on 005
usb_os_find_devices: Found 001 on 004
usb_os_find_devices: Found 001 on 003
usb_os_find_devices: Found 001 on 002
usb_os_find_devices: Found 004 on 001
usb_os_find_devices: Found 001 on 001
error obtaining child information: Inappropriate ioctl for device
Looking for default devices ...
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 1d6b:0001
searching devices, found USB ID 19d2:1514
found matching vendor ID
found matching product ID
adding device
searching devices, found USB ID 1d6b:0002
Found device in default mode, class or configuration (1)
Accessing device 004 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x81 (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
SCSI inquiry data (for identification)
-------------------------
Vendor String: ZTE
Model String: USB SCSI CD-ROM
Revision String: 0001
-------------------------
USB description data (for identification)
-------------------------
Manufacturer: ZTE
Product: MF195
Serial No.: MF1950TMOD010000
-------------------------
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x81
Resetting message endpoint 0x01
USB error: could not release intf 0: No such device
Device is gone, skipping any further commands
-> Run lsusb to note any changes. Bye.
tester@tester-desktop:~$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 19d2:1515 ZTE WCDMA Technologies MSM
tester@tester-desktop:~$