Ubuntu-gr Forum

Learner έγραψε:Για να δεις αν "έσκασε" ο δίσκος , κάνε ένα boot από το LiveCD/Usb του Ubuntu (πάλι) και τρέξε τις παρακάτω εντολές

Κώδικας: Επιλογή όλων

sudo apt-get install smartmontools --no-install-recommends

Κώδικας: Επιλογή όλων

sudo smartctl -a /dev/sda

/dev/sda = Ο 80αρης , αν εκεί έχεις εγκατεστημένο το Ubuntu.

Κάνε ποστ τα αποτελέσματα εδώ . Ανάμεσα σε κώδικα

Επίσης από την υπογραφή σου (βλέπω πως την ανανέωσες) φαίνεται πως έχεις το Ubuntu 11.04 (natty) και όχι το 12.04 .

Κώδικας: Επιλογή όλων

ubuntu@ubuntu:~$ sudo apt-get install smartmontools --no-install-recommends
Reading package lists... Done
Building dependency tree
Reading state information... Done
Suggested packages:
gsmartcontrol smart-notifier
Recommended packages:
mailx mailutils
The following NEW packages will be installed:
smartmontools
0 upgraded, 1 newly installed, 0 to remove and 356 not upgraded.
Need to get 389 kB of archives.
After this operation, 1,077 kB of additional disk space will be used.
Get:1 http://archive.ubuntu.com/ubuntu/ natty/main smartmontools i386 5.39.1+svn3124-2 [389 kB]
Fetched 389 kB in 2s (145 kB/s)
Selecting previously deselected package smartmontools.
(Reading database ... 136654 files and directories currently installed.)
Unpacking smartmontools (from .../smartmontools_5.39.1+svn3124-2_i386.deb) ...
Processing triggers for ureadahead ...
Processing triggers for man-db ...
Setting up smartmontools (5.39.1+svn3124-2) ...


Κώδικας: Επιλογή όλων

ubuntu@ubuntu:~$ sudo smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA family
Device Model: WDC WD800JD-22MSA1
Serial Number: WD-WMAM9DLZ8017
Firmware Version: 10.01E01
User Capacity: 80,026,361,856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Sep 25 13:07:47 2012 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.

General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 33) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 36
3 Spin_Up_Time 0x0003 176 164 021 Pre-fail Always - 2183
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2160
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 17027
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2116
190 Airflow_Temperature_Cel 0x0022 060 043 045 Old_age Always In_the_past 40
194 Temperature_Celsius 0x0022 103 086 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 3
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 2
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 3

SMART Error Log Version: 1
ATA Error Count: 108 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 108 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:13.786 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:13.786 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:13.786 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:13.786 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:13.786 SET FEATURES [Set transfer mode]

Error 107 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:11.835 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:11.835 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:11.835 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:11.835 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:11.835 SET FEATURES [Set transfer mode]

Error 106 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:09.890 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:09.890 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:09.890 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:09.890 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:09.889 SET FEATURES [Set transfer mode]

Error 105 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:07.885 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:07.885 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:07.885 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:07.885 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:07.885 SET FEATURES [Set transfer mode]

Error 104 occurred at disk power-on lifetime: 17027 hours (709 days + 11 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 5e 7f 87 40

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 50 7f 87 04 08 00:18:05.978 READ FPDMA QUEUED
ef 10 02 00 00 00 00 00 00:18:05.978 SET FEATURES [Reserved for Serial ATA]
27 00 00 00 00 00 00 00 00:18:05.978 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 00 00 00:18:05.978 IDENTIFY DEVICE
ef 03 46 00 00 00 00 00 00:18:05.978 SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Conveyance offline Completed without error 00% 16722 -
# 2 Short offline Completed without error 00% 16722 -
# 3 Short offline Completed without error 00% 15751 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.