Δημοσιεύτηκε: 04 Νοέμ 2012, 19:13
από Ilias95
Spoiler: show
- Κώδικας: Επιλογή όλων
ilias@ilias-pc:~$ sudo smartctl -a -s on /dev/sda
sudo: unable to resolve host ilias-pc
[sudo] password for ilias:
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.5.0-17-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.12
Device Model: ST3320418AS
Serial Number: 9VM4S9JP
LU WWN Device Id: 5 000c50 0197c8b1d
Firmware Version: CC37
User Capacity: 320.072.933.376 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Sun Nov 4 18:08:12 2012 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 625) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 099 006 Pre-fail Always - 237118426
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 093 093 020 Old_age Always - 7773
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 077 060 030 Pre-fail Always - 56666559
9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5688
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3992
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 2218
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 067 054 045 Old_age Always - 33 (Min/Max 33/33)
194 Temperature_Celsius 0x0022 033 046 000 Old_age Always - 33 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 055 040 000 Old_age Always - 237118426
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 1
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 225640401877963
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 4207739000
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 3306531029
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ilias@ilias-pc:~$
Σύμφωνα με τον οδηγό του the_eye οι τιμές στα 1 Raw_Read_Error_Rate, 188 Command_Timeout πρέπει να είναι 0, πράγμα που δεν συμβαίνει.
Θυμάμαι όμως και άλλες φορές παλιότερα που είχα κάνει το test υπήρχαν τιμές στα παραπάνω αλλά ποτέ δεν αντιμετώπισα προβλήματα σαν αυτά που περιέγραψα παραπάνω.
Υπάρχει πρόβλημα στο δίσκο;