Ubuntu-gr Forum

Learner έγραψε:

dkotzias έγραψε:2. ξεκειναειην την εγκατασταση και κολαει μολις βγει το λογοτυπο. Σε πιο παλιες εκδοσεις σχεδον πριν τελειωσει. δεν βγαζει καπιο μηνυμα απλως παγωνει τν οθονη

Μπορείς να φορτώσεις ένα LiveUSB , χωρίς να κάνεις εγκατάσταση, και να δοκιμάσεις αυτό εδώ ; Θα χρειαστεί να δημοσιεύσεις τα αποτελέσματα εδώ να τα δούμε.

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM160HI
Serial Number: S10UJD0PC23214
Firmware Version: HH100-08
User Capacity: 160.041.885.696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Sep 16 00:31:09 2015 EEST

==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for details.

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 32) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 61) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 61) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 12
3 Spin_Up_Time 0x0007 252 252 025 Pre-fail Always - 1875
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1829
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 704
10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 6
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 894
191 G-Sense_Error_Rate 0x0032 041 041 000 Old_age Always - 599349
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 111
194 Temperature_Celsius 0x0022 106 082 000 Old_age Always - 44 (Lifetime Min/Max 11/52)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 10233
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 1
201 Soft_Read_Error_Rate 0x0032 252 252 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 883
225 Load_Cycle_Count 0x0032 097 097 000 Old_age Always - 30637

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Interrupted [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.