Δημοσιεύτηκε: 27 Απρ 2017, 23:40
Χωρις suspended δεν εχω καποιο θεμα αλλα δεν θα ηθελα να λειτουργει το pc τοσες ωρες απο το πρωι εως το βραδυ.
Και κατα το κλεισιμο το ''I/O PAGE FAULT'' δεν λεει να φυγει και αναγκαστηκα τον κλεινω απο το κουμπι.Εν τω μεταξυ ολοι κι ολοι οι drivers που μου δινει ειναι αυτοι της nvidia τιποτε αλλo και μονο απο xorg.xserver γιατι οι tested αστο καλυτερα μη στα λεω.
Δισκος:
Και κατα το κλεισιμο το ''I/O PAGE FAULT'' δεν λεει να φυγει και αναγκαστηκα τον κλεινω απο το κουμπι.Εν τω μεταξυ ολοι κι ολοι οι drivers που μου δινει ειναι αυτοι της nvidia τιποτε αλλo και μονο απο xorg.xserver γιατι οι tested αστο καλυτερα μη στα λεω.
Δισκος:
- Κώδικας: Επιλογή όλων
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10
Device Model: ST3250310AS
Serial Number: 6RYCG006
Firmware Version: 3.AHC
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Thu Apr 27 23:32:49 2017 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 433) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 56) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0
3 Spin_Up_Time 0x0002 099 098 000 Old_age Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3877
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 086 060 030 Pre-fail Always - 461094577
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 17955
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0033 097 097 020 Pre-fail Always - 3871
184 End-to-End_Error 0x0033 100 253 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x0022 100 100 045 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 052 000 Old_age Always - 34 (Min/Max 17/48)
194 Temperature_Celsius 0x001a 034 048 000 Old_age Always - 34 (0 17 0 0 0)
195 Hardware_ECC_Recovered 0x0012 068 060 000 Old_age Always - 22114550
197 Current_Pending_Sector 0x0010 100 100 000 Old_age Offline - 0
198 Offline_Uncorrectable 0x003e 100 100 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 17954 -
# 2 Short offline Completed without error 00% 17374 -
# 3 Short offline Completed without error 00% 13223 -
# 4 Short offline Completed without error 00% 10195 -
# 5 Extended offline Interrupted (host reset) 80% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.