Δημοσιεύτηκε: 28 Ιουν 2019, 21:27
Εκανα ελεγχο στον δισκο και εβγαλε αυτα
Μπορει καποιος να βοηθησει ;
- Κώδικας: Επιλογή όλων
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 117 100 040 Pre-fail Offline - 3348
3 Spin_Up_Time 0x0023 215 100 033 Pre-fail Always - 2
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 9690
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 21 (0 2)
7 Seek_Error_Rate 0x000f 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 115 100 040 Pre-fail Offline - 34
9 Power_On_Hours 0x0032 081 081 000 Old_age Always - 8562
10 Spin_Retry_Count 0x0033 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 094 094 000 Old_age Always - 9690
184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 5308416
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 054 050 000 Old_age Always - 46 (Min/Max 42/46)
191 G-Sense_Error_Rate 0x000a 100 099 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 9306254
193 Load_Cycle_Count 0x0032 099 099 000 Old_age Always - 13546
194 Temperature_Celsius 0x0022 119 100 000 Old_age Always - 46 (Min/Max 15/50)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 2
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x002a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x002a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
nikos@nikos-HP-Compaq-dc7900-Ultra-Slim-Desktop:~$
Μπορει καποιος να βοηθησει ;