Δημοσιεύτηκε: 23 Ιαν 2020, 21:02
Δε βλέπω νά 'χει κάπου σφάλμα ο δίσκος.
Είχα κάνει αυτό το τεστ και όταν ξεκίνησα την προσπάθεια.
Είχα κάνει αυτό το τεστ και όταν ξεκίνησα την προσπάθεια.
- Κώδικας: Επιλογή όλων
kubuntu@kubuntu:~$ sudo smartctl -a /dev/sda
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-23-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABF...
Device Model: TOSHIBA MQ01ABF050
Serial Number: 746QT7CLT
LU WWN Device Id: 5 000039 5a1c81f0b
Firmware Version: AM0P1D
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Thu Jan 23 17:57:46 2020 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 125) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 128
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1325
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 4777
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1935
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 158
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 117
193 Load_Cycle_Count 0x0032 094 094 000 Old_age Always - 65817
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 30 (Min/Max 8/48)
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 52617896
200 Multi_Zone_Error_Rate 0x0032 100 100 000 Old_age Always - 250350059
240 Head_Flying_Hours 0x0032 089 089 000 Old_age Always - 4559
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 12098945940
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 11769626833
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 15
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.