Δημοσιεύτηκε: 04 Φεβ 2015, 23:38
Αυτά μου έδωσε:
Τι κάνω;
Off topic:
Αυτή είναι η μητρική μου , παίρνει σκληρό SATA 3 ?
- Κώδικας: Επιλογή όλων
babis@babis-G31MF-S2:~$ sudo smartctl -a /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-75-generic-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.11
Device Model: ST3320613AS
Serial Number: 9SZ0DBW0
Firmware Version: SD22
User Capacity: 320.071.851.520 bytes [320 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Feb 4 22:36:27 2015 EET
==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207951
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207957
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 609) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 68) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 112 099 006 Pre-fail Always - 49299918
3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3455
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 38915316433
9 Power_On_Hours 0x0032 077 077 000 Old_age Always - 20874
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 1
12 Power_Cycle_Count 0x0032 097 097 020 Old_age Always - 3454
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 092 000 Old_age Always - 137441051671
189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 171
190 Airflow_Temperature_Cel 0x0022 070 053 045 Old_age Always - 30 (Min/Max 30/31)
194 Temperature_Celsius 0x0022 030 047 000 Old_age Always - 30 (0 12 0 0)
195 Hardware_ECC_Recovered 0x001a 040 033 000 Old_age Always - 49299918
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 13
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 13
199 UDMA_CRC_Error_Count 0x003e 200 001 000 Old_age Always - 45119
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
babis@babis-G31MF-S2:~$
]
Τι κάνω;
Off topic:
Αυτή είναι η μητρική μου , παίρνει σκληρό SATA 3 ?