Ubuntu-gr Forum

Καλησπέρα. Αγόρασα χθες την συγκεκριμένη USB κάρτα. Έχω ακολουθήσει τον παραπάνω οδηγό. Η κάρτα φαίνεται να είναι οκ (το φωτάκι ανάβει και φαίνεται στο hardwaare drivers)αλλά δεν μπορώ να συνδεθώ στο modem. Το δίκτυο του modem λειτουργεί διότι το έλεγξα με ένα laptop που έχει ενσωματωμένη κάρτα και windows ΧP. Τί μπορεί να συμβαίνει;


Τα αποτελεσματα της εντολής lsmod είναι

Κώδικας: Επιλογή όλων

sotiris@sotiris-desktop:~$ lsmod
Module Size Used by
arc4 1153 2
binfmt_misc 6587 1
ppdev 5259 0
ath9k_htc 35429 0
ath9k_common 5623 1 ath9k_htc
ath9k_hw 280464 2 ath9k_htc,ath9k_common
mac80211 228771 2 ath9k_htc,ath9k_common
vboxdrv 190857 0
led_class 2864 1 ath9k_htc
snd_cmipci 30469 0
gameport 9089 1 snd_cmipci
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70886 2 snd_cmipci,snd_pcm_oss
snd_page_alloc 7172 1 snd_pcm
snd_opl3_lib 8998 1 snd_cmipci
snd_hwdep 5412 1 snd_opl3_lib
snd_mpu401_uart 5649 1 snd_cmipci
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
ath 7977 2 ath9k_htc,ath9k_hw
snd_timer 19098 3 snd_pcm,snd_opl3_lib,snd_seq
snd_seq_device 5700 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 54148 12 snd_cmipci,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
cfg80211 145121 4 ath9k_htc,ath9k_common,mac80211,ath
usbhid 36174 0
compat_firmware_class 6490 1 ath9k_htc
r8169 34300 0
hid 67032 1 usbhid
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
serio_raw 3978 0
ohci1394 27238 0
nvidia 9962496 38
vga16fb 11385 1
vgastate 8961 1 vga16fb
soundcore 6620 1 snd
intel_agp 24415 0
agpgart 31788 2 nvidia,intel_agp
lp 7028 0
parport 32635 2 ppdev,lp
floppy 53080 0
usb_storage 39457 0
mii 4381 1 r8169
ahci 32232 0
ieee1394 81213 1 ohci1394
pata_jmicron 1843 0


το αποτελεσμα της dmesg είναι

Κώδικας: Επιλογή όλων

[ 0.203901] ACPI: ACPI bus type pnp unregistered
[ 0.203905] PnPBIOS: Disabled by ACPI PNP
[ 0.203915] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.203918] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.203924] system 00:07: ioport range 0x400-0x4bf could not be reserved
[ 0.203931] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.203937] system 00:0b: iomem range 0xf0000-0xfffff could not be reserved
[ 0.203939] system 00:0b: iomem range 0xcff00000-0xcfffffff could not be reserved
[ 0.203942] system 00:0b: iomem range 0xcfee0000-0xcfefffff could not be reserved
[ 0.203944] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.203947] system 00:0b: iomem range 0x100000-0xcfedffff could not be reserved
[ 0.203950] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.203952] system 00:0b: iomem range 0xfed14000-0xfed1dfff has been reserved
[ 0.203955] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved
[ 0.203957] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.203960] system 00:0b: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.203962] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.203965] system 00:0b: iomem range 0xe0000-0xeffff has been reserved
[ 0.238659] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.238662] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.238666] pci 0000:00:01.0: MEM window: 0xfa000000-0xfcffffff
[ 0.238670] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.238674] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.238676] pci 0000:00:1c.0: IO window: 0x9000-0x9fff
[ 0.238681] pci 0000:00:1c.0: MEM window: 0xfdb00000-0xfdbfffff
[ 0.238684] pci 0000:00:1c.0: PREFETCH window: 0x000000fd800000-0x000000fd8fffff
[ 0.238690] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.238693] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.238697] pci 0000:00:1c.4: MEM window: 0xfd700000-0xfd7fffff
[ 0.238701] pci 0000:00:1c.4: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.238707] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
[ 0.238709] pci 0000:00:1c.5: IO window: 0xb000-0xbfff
[ 0.238714] pci 0000:00:1c.5: MEM window: 0xfdd00000-0xfddfffff
[ 0.238717] pci 0000:00:1c.5: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.238723] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.238726] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.238730] pci 0000:00:1e.0: MEM window: 0xfda00000-0xfdafffff
[ 0.238734] pci 0000:00:1e.0: PREFETCH window: 0x000000fd900000-0x000000fd9fffff
[ 0.238746] alloc irq_desc for 16 on node -1
[ 0.238748] alloc kstat_irqs on node -1
[ 0.238754] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.238758] pci 0000:00:01.0: setting latency timer to 64
[ 0.238766] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.238770] pci 0000:00:1c.0: setting latency timer to 64
[ 0.238778] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.238782] pci 0000:00:1c.4: setting latency timer to 64
[ 0.238788] alloc irq_desc for 17 on node -1
[ 0.238790] alloc kstat_irqs on node -1
[ 0.238793] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.238797] pci 0000:00:1c.5: setting latency timer to 64
[ 0.238803] pci 0000:00:1e.0: setting latency timer to 64
[ 0.238807] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.238809] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.238811] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.238814] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfcffffff]
[ 0.238816] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.238818] pci_bus 0000:02: resource 0 io: [0x9000-0x9fff]
[ 0.238820] pci_bus 0000:02: resource 1 mem: [0xfdb00000-0xfdbfffff]
[ 0.238822] pci_bus 0000:02: resource 2 pref mem [0xfd800000-0xfd8fffff]
[ 0.238825] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.238827] pci_bus 0000:03: resource 1 mem: [0xfd700000-0xfd7fffff]
[ 0.238829] pci_bus 0000:03: resource 2 pref mem [0xfde00000-0xfdefffff]
[ 0.238831] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.238833] pci_bus 0000:04: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.238835] pci_bus 0000:04: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.238837] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff]
[ 0.238839] pci_bus 0000:05: resource 1 mem: [0xfda00000-0xfdafffff]
[ 0.238842] pci_bus 0000:05: resource 2 pref mem [0xfd900000-0xfd9fffff]
[ 0.238844] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.238846] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.238878] NET: Registered protocol family 2
[ 0.238967] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.239243] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.239626] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.239806] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.239808] TCP reno registered
[ 0.239909] NET: Registered protocol family 1
[ 0.240032] pci 0000:01:00.0: Boot video device
[ 0.240199] cpufreq-nforce2: No nForce2 chipset.
[ 0.240222] Scanning for low memory corruption every 60 seconds
[ 0.240311] audit: initializing netlink socket (disabled)
[ 0.240323] type=2000 audit(1281024073.239:1): initialized
[ 0.249055] highmem bounce pool size: 64 pages
[ 0.249059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.250319] VFS: Disk quotas dquot_6.5.2
[ 0.250370] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.250860] fuse init (API version 7.13)
[ 0.250933] msgmni has been set to 1621
[ 0.251110] alg: No test for stdrng (krng)
[ 0.251154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.251157] io scheduler noop registered
[ 0.251158] io scheduler anticipatory registered
[ 0.251160] io scheduler deadline registered
[ 0.251195] io scheduler cfq registered (default)
[ 0.251318] alloc irq_desc for 24 on node -1
[ 0.251320] alloc kstat_irqs on node -1
[ 0.251328] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.251333] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.251416] alloc irq_desc for 25 on node -1
[ 0.251418] alloc kstat_irqs on node -1
[ 0.251424] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.251431] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.251527] alloc irq_desc for 26 on node -1
[ 0.251528] alloc kstat_irqs on node -1
[ 0.251534] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.251541] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.251639] alloc irq_desc for 27 on node -1
[ 0.251641] alloc kstat_irqs on node -1
[ 0.251647] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.251654] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.251728] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.251820] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.251911] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.251914] ACPI: Power Button [PWRB]
[ 0.251964] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.251966] ACPI: Power Button [PWRF]
[ 0.252420] ACPI: SSDT cfee7ec0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20041203)
[ 0.252617] processor LNXCPU:00: registered as cooling_device0
[ 0.252795] ACPI: SSDT cfee8380 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20041203)
[ 0.252974] processor LNXCPU:01: registered as cooling_device1
[ 0.256697] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.256705] ACPI: Thermal Zone [THRM] (20 C)
[ 0.257943] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.259105] brd: module loaded
[ 0.259503] loop: module loaded
[ 0.259580] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.259681] ata_piix 0000:00:1f.2: version 2.13
[ 0.259698] alloc irq_desc for 19 on node -1
[ 0.259700] alloc kstat_irqs on node -1
[ 0.259705] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.259709] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.259758] isapnp: Scanning for PnP cards...
[ 0.329708] Freeing initrd memory: 7726k freed
[ 0.438915] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.439967] scsi0 : ata_piix
[ 0.440074] scsi1 : ata_piix
[ 0.440641] ata1: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
[ 0.440645] ata2: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
[ 0.440670] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.440675] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.440709] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.440775] scsi2 : ata_piix
[ 0.440819] scsi3 : ata_piix
[ 0.441110] ata3: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 19
[ 0.441114] ata4: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 19
[ 0.441176] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[ 0.441181] alloc irq_desc for 18 on node -1
[ 0.441183] alloc kstat_irqs on node -1
[ 0.441189] pata_acpi 0000:04:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.441215] pata_acpi 0000:04:00.1: setting latency timer to 64
[ 0.441227] pata_acpi 0000:04:00.1: PCI INT B disabled
[ 0.441492] Fixed MDIO Bus: probed
[ 0.441523] PPP generic driver version 2.4.2
[ 0.441575] tun: Universal TUN/TAP device driver, 1.6
[ 0.441577] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.441673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.441687] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.441701] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.441704] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.441730] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.445644] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.445658] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.459967] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.460038] usb usb1: configuration #1 chosen from 1 choice
[ 0.460063] hub 1-0:1.0: USB hub found
[ 0.460069] hub 1-0:1.0: 4 ports detected
[ 0.460119] alloc irq_desc for 23 on node -1
[ 0.460121] alloc kstat_irqs on node -1
[ 0.460125] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.460132] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.460135] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.460161] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.464053] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.464063] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.479969] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.480031] usb usb2: configuration #1 chosen from 1 choice
[ 0.480052] hub 2-0:1.0: USB hub found
[ 0.480058] hub 2-0:1.0: 6 ports detected
[ 0.480106] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.480120] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.480137] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.480143] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.480146] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.480170] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.480196] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.480269] usb usb3: configuration #1 chosen from 1 choice
[ 0.480290] hub 3-0:1.0: USB hub found
[ 0.480295] hub 3-0:1.0: 2 ports detected
[ 0.480331] alloc irq_desc for 21 on node -1
[ 0.480332] alloc kstat_irqs on node -1
[ 0.480336] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.480341] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.480343] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.480368] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.480393] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.480469] usb usb4: configuration #1 chosen from 1 choice
[ 0.480491] hub 4-0:1.0: USB hub found
[ 0.480497] hub 4-0:1.0: 2 ports detected
[ 0.480533] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.480538] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.480541] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.480566] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.480585] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
[ 0.480660] usb usb5: configuration #1 chosen from 1 choice
[ 0.480682] hub 5-0:1.0: USB hub found
[ 0.480687] hub 5-0:1.0: 2 ports detected
[ 0.480722] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.480727] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.480729] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.480759] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.480778] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
[ 0.480850] usb usb6: configuration #1 chosen from 1 choice
[ 0.480871] hub 6-0:1.0: USB hub found
[ 0.480877] hub 6-0:1.0: 2 ports detected
[ 0.480913] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.480918] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.480920] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.480945] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.480964] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
[ 0.481036] usb usb7: configuration #1 chosen from 1 choice
[ 0.481058] hub 7-0:1.0: USB hub found
[ 0.481063] hub 7-0:1.0: 2 ports detected
[ 0.481148] PNP: No PS/2 controller found. Probing ports directly.
[ 0.612641] isapnp: No Plug & Play device found
[ 0.732918] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.733009] mice: PS/2 mouse device common for all mice
[ 0.733100] rtc_cmos 00:03: RTC can wake from S4
[ 0.733132] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.733151] rtc0: alarms up to one month, 242 bytes nvram
[ 0.733235] device-mapper: uevent: version 1.0.3
[ 0.733313] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.733365] device-mapper: multipath: version 1.1.0 loaded
[ 0.733368] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.733459] EISA: Probing bus 0 at eisa.0
[ 0.733482] EISA: Detected 0 cards.
[ 0.733544] cpuidle: using governor ladder
[ 0.733546] cpuidle: using governor menu
[ 0.733926] TCP cubic registered
[ 0.734061] NET: Registered protocol family 10
[ 0.734467] lo: Disabled Privacy Extensions
[ 0.734759] NET: Registered protocol family 17
[ 0.735055] Using IPI No-Shortcut mode
[ 0.735111] PM: Resume from disk failed.
[ 0.735121] registered taskstats version 1
[ 0.735451] Magic number: 6:46:34
[ 0.735505] rtc_cmos 00:03: setting system clock to 2010-08-05 16:01:14 UTC (1281024074)
[ 0.735507] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.735509] EDD information not available.
[ 0.792768] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 0.925447] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.925535] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.934053] ata4.00: ATA-8: ST3750330AS, SD15, max UDMA/133
[ 0.934057] ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.942468] usb 2-1: configuration #1 chosen from 1 choice
[ 0.950190] ata4.00: configured for UDMA/133
[ 0.974566] ata3.00: ATA-7: MAXTOR STM3250820AS, 3.AAE, max UDMA/133
[ 0.974570] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.041238] ata3.00: configured for UDMA/133
[ 1.054120] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 1.092793] ata1.00: SATA link down (SStatus 0 SControl 300)
[ 1.092804] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 1.185740] usb 2-2: configuration #1 chosen from 1 choice
[ 1.244074] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.244085] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 1.293953] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 1.293956] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.360627] ata2.00: configured for UDMA/133
[ 1.360742] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.360862] sd 1:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.360867] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.360904] sd 1:0:0:0: [sda] Write Protect is off
[ 1.360906] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.360930] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.360970] scsi 2:0:0:0: Direct-Access ATA MAXTOR STM325082 3.AA PQ: 0 ANSI: 5
[ 1.361044] sda:
[ 1.361061] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.361152] scsi 3:0:0:0: Direct-Access ATA ST3750330AS SD15 PQ: 0 ANSI: 5
[ 1.361239] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 1.361300] sd 3:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 1.361314] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.361380] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.361382] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.361394] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.361396] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.361425] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.361464] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.361628] sdb:
[ 1.361696] sdc: sdc1
[ 1.378621] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 1.400263] sda1 sda2 sda3
[ 1.421245] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.430101] [LDM] sdb1
[ 1.430489] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.430502] Freeing unused kernel memory: 676k freed
[ 1.430764] Write protecting the kernel text: 4836k
[ 1.430834] Write protecting the kernel read-only data: 1880k
[ 1.444599] udev: starting version 151
[ 1.500337] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.500369] pata_jmicron 0000:04:00.1: setting latency timer to 64
[ 1.513881] scsi4 : pata_jmicron
[ 1.517186] scsi5 : pata_jmicron
[ 1.517241] ata5: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 18
[ 1.517244] ata6: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 18
[ 1.548340] ahci 0000:04:00.0: version 3.0
[ 1.548358] ahci 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.554844] Floppy drive(s): fd0 is 1.44M
[ 1.554922] Initializing USB Mass Storage driver...
[ 1.559315] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.559590] usb-storage: device found at 3
[ 1.559592] usb-storage: waiting for device to settle before scanning
[ 1.559604] usbcore: registered new interface driver usb-storage
[ 1.559643] USB Mass Storage support registered.
[ 1.564572] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.564576] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.564582] ahci 0000:04:00.0: setting latency timer to 64
[ 1.564720] scsi7 : ahci
[ 1.564794] scsi8 : ahci
[ 1.564882] ata7: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 17
[ 1.564886] ata8: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 17
[ 1.572452] FDC 0 is a post-1991 82077
[ 1.632108] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 1.688565] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL12, max UDMA/33
[ 1.688603] ata5.01: ATAPI: _NEC DVD_RW ND-3500AG, 2.16, max UDMA/33
[ 1.704665] ata5.00: configured for UDMA/33
[ 1.720719] ata5.01: configured for UDMA/33
[ 1.730672] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL12 PQ: 0 ANSI: 5
[ 1.734726] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 1.743387] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.743391] Uniform CD-ROM driver Revision: 3.20
[ 1.743487] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 1.743545] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 1.746373] scsi 4:0:1:0: CD-ROM _NEC DVD_RW ND-3500AG 2.16 PQ: 0 ANSI: 5
[ 1.748658] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.748778] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 1.748826] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 1.814198] usb 7-1: configuration #1 chosen from 1 choice
[ 1.884100] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.048033] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.049429] ata7.00: ATA-8: Hitachi HDS722020ALA330, JKAOA20N, max UDMA/133
[ 2.049433] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.050995] ata7.00: configured for UDMA/133
[ 2.064215] scsi 7:0:0:0: Direct-Access ATA Hitachi HDS72202 JKAO PQ: 0 ANSI: 5
[ 2.064359] sd 7:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.064380] sd 7:0:0:0: Attached scsi generic sg5 type 0
[ 2.064402] sd 7:0:0:0: [sdd] Write Protect is off
[ 2.064404] sd 7:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.064440] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.064559] sdd: sdd1
[ 2.082377] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 6.556946] usb-storage: device scan complete
[ 6.557557] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 6.558184] scsi 6:0:0:1: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 6.558581] sd 6:0:0:0: Attached scsi generic sg6 type 0
[ 6.558687] sd 6:0:0:1: Attached scsi generic sg7 type 0
[ 6.560419] sd 6:0:0:0: [sde] Attached SCSI removable disk
[ 6.561040] sd 6:0:0:1: [sdf] Attached SCSI removable disk
[ 15.550856] Adding 8410016k swap on /dev/sda3. Priority:-1 extents:1 across:8410016k
[ 15.563835] udev: starting version 151
[ 15.688378] Linux agpgart interface v0.103
[ 15.689323] lp: driver loaded but no devices found
[ 15.711265] vga16fb: initializing
[ 15.711268] vga16fb: mapped to 0xc00a0000
[ 15.711315] fb0: VGA16 VGA frame buffer device
[ 15.808924] nvidia: module license 'NVIDIA' taints kernel.
[ 15.808927] Disabling lock debugging due to kernel taint
[ 15.893989] type=1505 audit(1281013289.656:2): operation="profile_load" pid=681 name="/sbin/dhclient3"
[ 15.894572] type=1505 audit(1281013289.656:3): operation="profile_load" pid=681 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.894879] type=1505 audit(1281013289.656:4): operation="profile_load" pid=681 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.385936] type=1505 audit(1281013290.148:5): operation="profile_load" pid=818 name="/usr/share/gdm/guest-session/Xsession"
[ 16.387342] type=1505 audit(1281013290.148:6): operation="profile_replace" pid=819 name="/sbin/dhclient3"
[ 16.387920] type=1505 audit(1281013290.148:7): operation="profile_replace" pid=819 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 16.388245] type=1505 audit(1281013290.152:8): operation="profile_replace" pid=819 name="/usr/lib/connman/scripts/dhclient-script"
[ 16.447466] type=1505 audit(1281013290.208:9): operation="profile_load" pid=825 name="/usr/bin/evince"
[ 16.454908] type=1505 audit(1281013290.216:10): operation="profile_load" pid=825 name="/usr/bin/evince-previewer"
[ 16.460418] type=1505 audit(1281013290.224:11): operation="profile_load" pid=825 name="/usr/bin/evince-thumbnailer"
[ 16.493838] ohci1394 0000:05:02.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 16.507417] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 16.507432] r8169 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.507467] r8169 0000:03:00.0: setting latency timer to 64
[ 16.507516] alloc irq_desc for 28 on node -1
[ 16.507518] alloc kstat_irqs on node -1
[ 16.507530] r8169 0000:03:00.0: irq 28 for MSI/MSI-X
[ 16.508097] eth0: RTL8168b/8111b at 0xf9ca2000, 00:50:8d:91:cf:ce, XID 10000000 IRQ 28
[ 16.572906] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[fdaff000-fdaff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 16.637305] usbcore: registered new interface driver hiddev
[ 16.642313] Console: switching to colour frame buffer device 80x30
[ 16.652823] input: Liteon Microsoft® Wireless Receiver 700 v2.0 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.0/input/input3
[ 16.652894] generic-usb 0003:045E:0734.0001: input,hidraw0: USB HID v1.11 Keyboard [Liteon Microsoft® Wireless Receiver 700 v2.0] on usb-0000:00:1d.2-1/input0
[ 16.679533] cfg80211: Calling CRDA to update world regulatory domain
[ 16.688741] input: Liteon Microsoft® Wireless Receiver 700 v2.0 as /devices/pci0000:00/0000:00:1d.2/usb7/7-1/7-1:1.1/input/input4
[ 16.688832] generic-usb 0003:045E:0734.0002: input,hidraw1: USB HID v1.11 Mouse [Liteon Microsoft® Wireless Receiver 700 v2.0] on usb-0000:00:1d.2-1/input1
[ 16.688855] usbcore: registered new interface driver usbhid
[ 16.688858] usbhid: v2.6:USB HID core driver
[ 16.743618] r8169: eth0: link down
[ 16.743777] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.762816] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.762823] nvidia 0000:01:00.0: setting latency timer to 64
[ 16.762828] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.763139] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
[ 16.809158] cfg80211: World regulatory domain updated:
[ 16.809161] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 16.809164] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.809167] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.809169] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 16.809172] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.809174] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 16.828939] C-Media PCI 0000:05:06.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 16.828951] C-Media PCI 0000:05:06.0: setting latency timer to 64
[ 17.008553] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 17.008556] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 17.008557] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 17.008558] vboxdrv: the usage of hardware performance counters by
[ 17.008559] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 17.009432] vboxdrv: Found 2 processor cores.
[ 17.009578] vboxdrv: fAsync=0 offMin=0x2b8 offMax=0x1018
[ 17.010040] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 17.010042] vboxdrv: Successfully loaded version 3.2.0 (interface 0x00140001).
[ 17.213140] vboxnetflt: no symbol version for RTSemFastMutexCreate
[ 17.213144] vboxnetflt: Unknown symbol RTSemFastMutexCreate
[ 17.213243] vboxnetflt: no symbol version for RTR0Init
[ 17.213245] vboxnetflt: Unknown symbol RTR0Init
[ 17.213447] vboxnetflt: no symbol version for SUPDrvLinuxIDC
[ 17.213449] vboxnetflt: Unknown symbol SUPDrvLinuxIDC
[ 17.213549] vboxnetflt: no symbol version for RTSemEventDestroy
[ 17.213551] vboxnetflt: Unknown symbol RTSemEventDestroy
[ 17.213618] vboxnetflt: no symbol version for RTUuidFromStr
[ 17.213620] vboxnetflt: Unknown symbol RTUuidFromStr
[ 17.213684] vboxnetflt: no symbol version for RTSemEventSignal
[ 17.213686] vboxnetflt: Unknown symbol RTSemEventSignal
[ 17.213751] vboxnetflt: no symbol version for RTErrConvertFromErrno
[ 17.213753] vboxnetflt: Unknown symbol RTErrConvertFromErrno
[ 17.213817] vboxnetflt: no symbol version for RTSemEventWait
[ 17.213819] vboxnetflt: Unknown symbol RTSemEventWait
[ 17.213884] vboxnetflt: no symbol version for RTSpinlockReleaseNoInts
[ 17.213886] vboxnetflt: Unknown symbol RTSpinlockReleaseNoInts
[ 17.213949] vboxnetflt: no symbol version for RTMemAllocZ
[ 17.213951] vboxnetflt: Unknown symbol RTMemAllocZ
[ 17.214016] vboxnetflt: no symbol version for RTErrConvertToErrno
[ 17.214018] vboxnetflt: Unknown symbol RTErrConvertToErrno
[ 17.214118] vboxnetflt: no symbol version for RTSemFastMutexRequest
[ 17.214119] vboxnetflt: Unknown symbol RTSemFastMutexRequest
[ 17.214184] vboxnetflt: no symbol version for RTSpinlockCreate
[ 17.214186] vboxnetflt: Unknown symbol RTSpinlockCreate
[ 17.214252] vboxnetflt: no symbol version for RTNetIPv4PseudoChecksum
[ 17.214253] vboxnetflt: Unknown symbol RTNetIPv4PseudoChecksum
[ 17.214356] vboxnetflt: no symbol version for RTLogRelDefaultInstance
[ 17.214358] vboxnetflt: Unknown symbol RTLogRelDefaultInstance
[ 17.214422] vboxnetflt: no symbol version for RTMemFree
[ 17.214423] vboxnetflt: Unknown symbol RTMemFree
[ 17.214520] vboxnetflt: no symbol version for RTSemFastMutexRelease
[ 17.214522] vboxnetflt: Unknown symbol RTSemFastMutexRelease
[ 17.214633] vboxnetflt: no symbol version for RTTimeNanoTS
[ 17.214634] vboxnetflt: Unknown symbol RTTimeNanoTS
[ 17.214736] vboxnetflt: no symbol version for RTNetIPv4HdrChecksum
[ 17.214738] vboxnetflt: Unknown symbol RTNetIPv4HdrChecksum
[ 17.214913] vboxnetflt: no symbol version for RTSpinlockDestroy
[ 17.214915] vboxnetflt: Unknown symbol RTSpinlockDestroy
[ 17.215035] vboxnetflt: no symbol version for RTSemEventCreate
[ 17.215037] vboxnetflt: Unknown symbol RTSemEventCreate
[ 17.215103] vboxnetflt: no symbol version for RTNetIPv6PseudoChecksumEx
[ 17.215104] vboxnetflt: Unknown symbol RTNetIPv6PseudoChecksumEx
[ 17.215203] vboxnetflt: no symbol version for RTR0Term
[ 17.215205] vboxnetflt: Unknown symbol RTR0Term
[ 17.215343] vboxnetflt: no symbol version for RTUuidCompareStr
[ 17.215344] vboxnetflt: Unknown symbol RTUuidCompareStr
[ 17.215410] vboxnetflt: no symbol version for RTThreadPreemptIsEnabled
[ 17.215411] vboxnetflt: Unknown symbol RTThreadPreemptIsEnabled
[ 17.215533] vboxnetflt: no symbol version for RTSemFastMutexDestroy
[ 17.215535] vboxnetflt: Unknown symbol RTSemFastMutexDestroy
[ 17.215600] vboxnetflt: no symbol version for RTSpinlockAcquireNoInts
[ 17.215602] vboxnetflt: Unknown symbol RTSpinlockAcquireNoInts
[ 17.271482] ppdev: user-space parallel port driver
[ 17.462182] CPU0 attaching NULL sched-domain.
[ 17.462187] CPU1 attaching NULL sched-domain.
[ 17.640554] CPU0 attaching sched-domain:
[ 17.640557] domain 0: span 0-1 level MC
[ 17.640559] groups: 0 1
[ 17.640564] CPU1 attaching sched-domain:
[ 17.640566] domain 0: span 0-1 level MC
[ 17.640568] groups: 1 0
[ 17.676146] usb 2-1: ath9k_htc: Transferred FW: ar9271.fw, size: 51280
[ 17.920614] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d000090854e]
[ 18.782246] ath: EEPROM regdomain: 0x809c
[ 18.782248] ath: EEPROM indicates we should expect a country code
[ 18.782250] ath: doing EEPROM country->regdmn map search
[ 18.782252] ath: country maps to regdmn code: 0x52
[ 18.782254] ath: Country alpha2 being used: CN
[ 18.782255] ath: Regpair used: 0x52
[ 18.812158] cfg80211: Calling CRDA for country: CN
[ 18.814231] cfg80211: Regulatory domain changed to country: CN
[ 18.814234] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.814237] (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 18.814239] (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 18.814292] Registered led device: ath9k-phy0::radio
[ 18.814310] Registered led device: ath9k-phy0::assoc
[ 18.814326] Registered led device: ath9k-phy0::tx
[ 18.814340] Registered led device: ath9k-phy0::rx
[ 18.814343] usb 2-1: ath9k_htc: USB layer initialized
[ 18.814363] usbcore: registered new interface driver ath9k_hif_usb
[ 19.258469] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 19.746694] CPU0 attaching NULL sched-domain.
[ 19.746700] CPU1 attaching NULL sched-domain.
[ 19.760559] CPU0 attaching sched-domain:
[ 19.760562] domain 0: span 0-1 level MC
[ 19.760565] groups: 0 1
[ 19.760570] CPU1 attaching sched-domain:
[ 19.760572] domain 0: span 0-1 level MC
[ 19.760574] groups: 1 0
[ 224.977028] r8169: eth0: link up
[ 224.977242] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 235.648012] eth0: no IPv6 routers present
sotiris@sotiris-desktop:~$