Δημοσιεύτηκε: 29 Μάιος 2012, 15:55
Οριστε τα αποτελεσματα μου:
- Κώδικας: Επιλογή όλων
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 27) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 118 097 006 Pre-fail Always - 176690074
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always - 4299
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 271771252
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8087
10 Spin_Retry_Count 0x0013 100 099 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 020 Old_age Always - 4929
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 316
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 050 045 Old_age Always - 43 (Min/Max 29/44)
194 Temperature_Celsius 0x0022 043 050 000 Old_age Always - 43 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 056 047 000 Old_age Always - 26199266
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 188 000 Old_age Always - 600
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 1179 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1179 occurred at disk power-on lifetime: 8015 hours (333 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 5f 59 5c 48 e0 Error: ICRC, ABRT 95 sectors at LBA = 0x00485c59 = 4742233
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 38 5c 48 e0 00 00:09:59.153 READ DMA
c8 00 40 78 62 48 e0 00 00:09:59.145 READ DMA
c8 00 40 78 59 48 e0 00 00:09:59.119 READ DMA
c8 00 40 f8 59 48 e0 00 00:09:59.067 READ DMA
c8 00 40 38 5a 48 e0 00 00:09:59.059 READ DMA
Error 1178 occurred at disk power-on lifetime: 8015 hours (333 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 1f c1 bc 48 e0 Error: ICRC, ABRT 31 sectors at LBA = 0x0048bcc1 = 4766913
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 60 80 bc 48 e0 00 00:09:58.265 READ DMA
c8 00 60 f0 da cf e3 00 00:09:58.260 READ DMA
c8 00 c0 38 57 48 e0 00 00:09:58.197 READ DMA
c8 00 40 b8 56 48 e0 00 00:09:58.189 READ DMA
c8 00 80 f8 55 48 e0 00 00:09:58.053 READ DMA
Error 1177 occurred at disk power-on lifetime: 8015 hours (333 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 5f 19 56 48 e0 Error: ICRC, ABRT 95 sectors at LBA = 0x00485619 = 4740633
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 80 f8 55 48 e0 00 00:08:35.749 READ DMA
c8 00 20 d0 da cf e3 00 00:08:35.749 READ DMA
c8 00 40 b8 58 48 e0 00 00:08:35.695 READ DMA
ca 00 08 18 08 00 e0 00 00:08:35.694 WRITE DMA
ca 00 08 00 08 00 e0 00 00:08:35.694 WRITE DMA
Error 1176 occurred at disk power-on lifetime: 6436 hours (268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 4e 91 6c 17 e5 Error: ICRC, ABRT 78 sectors at LBA = 0x05176c91 = 85421201
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 5f 80 6c 17 e5 00 02:37:34.856 READ DMA
c4 00 f8 88 6b 17 e5 00 02:37:34.855 READ MULTIPLE
ca 00 08 58 83 07 e0 00 02:37:34.854 WRITE DMA
c8 00 f8 88 6b 17 e5 00 02:37:34.798 READ DMA
c8 00 08 80 6b 17 e5 00 02:37:34.798 READ DMA
Error 1175 occurred at disk power-on lifetime: 6436 hours (268 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 d7 a9 6b 17 e5 Error: ICRC, ABRT 215 sectors at LBA = 0x05176ba9 = 85420969
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 f8 88 6b 17 e5 00 02:37:34.856 READ DMA
c8 00 08 80 6b 17 e5 00 02:37:34.855 READ DMA
e7 00 00 00 00 00 a0 00 02:37:34.854 FLUSH CACHE
ca 00 08 10 3a 62 e0 00 02:37:34.798 WRITE DMA
ca 00 08 80 a2 3e e0 00 02:37:34.798 WRITE DMA
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.