Δημοσιεύτηκε: 10 Αύγ 2012, 14:55
Σε ευχαριστω φιλε simosx
Με το τελευταιο σου ποστ με βοηθησες να καταλαβω τι εκανα λαθος
εβαλα στο αρχειο Makefile το # στο INCLUDE_EXTRA_DVB := include-300
και αντίστοιχα εβγαλα το # απο το #INCLUDE_EXTRA_DVB := include-320
που ειναι για τον 3.2 kernel του ubuntu 12.04
μετα με την εντολή
όλα έγιναν ένταξη
μετα η εντολή
και το usb Αναγνωριστικέ μετα την επανεκκίνηση του συστήματος
Ευχαριστω για την βοηθεια και παραμενω στην 12.04 εκδοσή τελικα
Εδω ειναι το αποτελεσμα της εντολης : lsusb
Και εδω το αποτελεσμα για : dmesg
Με το τελευταιο σου ποστ με βοηθησες να καταλαβω τι εκανα λαθος
εβαλα στο αρχειο Makefile το # στο INCLUDE_EXTRA_DVB := include-300
- Κώδικας: Επιλογή όλων
#INCLUDE_EXTRA_DVB := include-300
και αντίστοιχα εβγαλα το # απο το #INCLUDE_EXTRA_DVB := include-320
- Κώδικας: Επιλογή όλων
INCLUDE_EXTRA_DVB := include-320
που ειναι για τον 3.2 kernel του ubuntu 12.04
μετα με την εντολή
- Κώδικας: Επιλογή όλων
make
sudo make install
όλα έγιναν ένταξη
μετα η εντολή
- Κώδικας: Επιλογή όλων
sudo reboot
και το usb Αναγνωριστικέ μετα την επανεκκίνηση του συστήματος
Ευχαριστω για την βοηθεια και παραμενω στην 12.04 εκδοσή τελικα
Εδω ειναι το αποτελεσμα της εντολης : lsusb
- Κώδικας: Επιλογή όλων
root@caslor-AOA110:~# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 1f4d:c803 G-Tek Electronics Group
Bus 001 Device 003: ID 064e:d101 Suyin Corp. Acer CrystalEye Webcam
root@caslor-AOA110:~#
Και εδω το αποτελεσμα για : dmesg
- Κώδικας: Επιλογή όλων
[ 0.502643] pci 0000:00:1c.1: bridge window [mem 0x71000000-0x720fffff 64bit pref]
[ 0.502660] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[ 0.502670] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.502684] pci 0000:00:1c.2: bridge window [mem 0x75200000-0x762fffff]
[ 0.502697] pci 0000:00:1c.2: bridge window [mem 0x72100000-0x730fffff 64bit pref]
[ 0.502719] pci 0000:04:00.0: BAR 6: assigned [mem 0x73100000-0x73107fff pref]
[ 0.502729] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.502739] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff]
[ 0.502753] pci 0000:00:1c.3: bridge window [mem 0x74100000-0x751fffff]
[ 0.502766] pci 0000:00:1c.3: bridge window [mem 0x73100000-0x740fffff 64bit pref]
[ 0.502783] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.502861] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.502879] pci 0000:00:1c.0: setting latency timer to 64
[ 0.502917] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.502932] pci 0000:00:1c.1: setting latency timer to 64
[ 0.502965] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.502977] pci 0000:00:1c.2: setting latency timer to 64
[ 0.503018] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.503030] pci 0000:00:1c.3: setting latency timer to 64
[ 0.503049] pci 0000:00:1e.0: setting latency timer to 64
[ 0.503063] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.503072] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.503081] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.503091] pci_bus 0000:00: resource 7 [mem 0x60000000-0xfebfffff]
[ 0.503101] pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
[ 0.503110] pci_bus 0000:01: resource 1 [mem 0x77300000-0x783fffff]
[ 0.503120] pci_bus 0000:01: resource 2 [mem 0x70000000-0x70ffffff 64bit pref]
[ 0.503130] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.503139] pci_bus 0000:02: resource 1 [mem 0x76300000-0x772fffff]
[ 0.503149] pci_bus 0000:02: resource 2 [mem 0x71000000-0x720fffff 64bit pref]
[ 0.503159] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.503168] pci_bus 0000:03: resource 1 [mem 0x75200000-0x762fffff]
[ 0.503178] pci_bus 0000:03: resource 2 [mem 0x72100000-0x730fffff 64bit pref]
[ 0.503188] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.503198] pci_bus 0000:04: resource 1 [mem 0x74100000-0x751fffff]
[ 0.503207] pci_bus 0000:04: resource 2 [mem 0x73100000-0x740fffff 64bit pref]
[ 0.503218] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.503227] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.503236] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.503246] pci_bus 0000:05: resource 7 [mem 0x60000000-0xfebfffff]
[ 0.503368] NET: Registered protocol family 2
[ 0.503580] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.504532] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.505698] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.506290] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.506301] TCP reno registered
[ 0.506317] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506342] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.506613] NET: Registered protocol family 1
[ 0.506668] pci 0000:00:02.0: Boot video device
[ 0.506732] pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.506764] pci 0000:00:1d.0: PCI INT A disabled
[ 0.506787] pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.506817] pci 0000:00:1d.1: PCI INT B disabled
[ 0.506839] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.506869] pci 0000:00:1d.2: PCI INT C disabled
[ 0.506895] pci 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.506927] pci 0000:00:1d.3: PCI INT D disabled
[ 0.506956] pci 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.507134] pci 0000:00:1d.7: PCI INT A disabled
[ 0.507201] PCI: CLS 0 bytes, default 64
[ 0.507215] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.507222] Simple Boot Flag at 0x44 set to 0x1
[ 0.508507] audit: initializing netlink socket (disabled)
[ 0.508544] type=2000 audit(1344598775.504:1): initialized
[ 0.574947] highmem bounce pool size: 64 pages
[ 0.574965] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.582159] VFS: Disk quotas dquot_6.5.2
[ 0.582389] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.584625] fuse init (API version 7.17)
[ 0.584994] msgmni has been set to 1682
[ 0.586296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.586432] io scheduler noop registered
[ 0.586440] io scheduler deadline registered
[ 0.586471] io scheduler cfq registered (default)
[ 0.586907] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.587007] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.587182] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.587267] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.587437] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.587528] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.587716] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.587803] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 0.588152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.588267] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.588523] intel_idle: MWAIT substates: 0x20220
[ 0.588543] intel_idle: v0.4 model 0x1C
[ 0.588549] intel_idle: lapic_timer_reliable_states 0x2
[ 0.588557] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.589126] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.589852] ACPI: AC Adapter [ACAD] (on-line)
[ 0.590443] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.590461] ACPI: Power Button [PWRB]
[ 0.590690] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.591098] ACPI: Lid Switch [LID0]
[ 0.591273] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.591289] ACPI: Sleep Button [SLPB]
[ 0.591500] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.591515] ACPI: Power Button [PWRF]
[ 0.594474] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.594500] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.594611] ERST: Table is not found!
[ 0.594617] GHES: HEST is not enabled!
[ 0.594683] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.594739] isapnp: Scanning for PnP cards...
[ 0.600978] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.949475] isapnp: No Plug & Play device found
[ 1.265292] Freeing initrd memory: 20100k freed
[ 1.329309] Linux agpgart interface v0.103
[ 1.329489] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 1.329787] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 1.330033] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 1.330288] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[ 1.334777] brd: module loaded
[ 1.337151] loop: module loaded
[ 1.337655] ata_piix 0000:00:1f.2: version 2.13
[ 1.337688] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.337699] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.337772] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.338606] scsi0 : ata_piix
[ 1.338842] scsi1 : ata_piix
[ 1.340498] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 1.340507] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 1.341787] Fixed MDIO Bus: probed
[ 1.341856] tun: Universal TUN/TAP device driver, 1.6
[ 1.341862] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.342040] PPP generic driver version 2.4.2
[ 1.342358] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.342409] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.342455] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.342464] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.342597] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.342641] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.342660] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.346542] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.346583] ehci_hcd 0000:00:1d.7: irq 16, io mem 0x78544400
[ 1.360039] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.360430] hub 1-0:1.0: USB hub found
[ 1.360443] hub 1-0:1.0: 8 ports detected
[ 1.360661] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.360704] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.360759] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.360783] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.360791] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.360946] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.360992] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00006080
[ 1.361351] hub 2-0:1.0: USB hub found
[ 1.361364] hub 2-0:1.0: 2 ports detected
[ 1.361521] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.361538] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.361546] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.361676] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.361738] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00006060
[ 1.362093] hub 3-0:1.0: USB hub found
[ 1.362105] hub 3-0:1.0: 2 ports detected
[ 1.362261] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.362278] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.362286] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.362426] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.362488] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006040
[ 1.362843] hub 4-0:1.0: USB hub found
[ 1.362870] hub 4-0:1.0: 2 ports detected
[ 1.363022] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.363039] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.363047] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.363184] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.363246] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006020
[ 1.363594] hub 5-0:1.0: USB hub found
[ 1.363606] hub 5-0:1.0: 2 ports detected
[ 1.363918] usbcore: registered new interface driver libusual
[ 1.364073] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 1.365137] i8042: Warning: Keylock active
[ 1.373646] i8042: Detected active multiplexing controller, rev 1.1
[ 1.378682] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.378701] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.378794] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.378872] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.378954] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.379357] mousedev: PS/2 mouse device common for all mice
[ 1.379978] rtc_cmos 00:03: RTC can wake from S4
[ 1.380266] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.380316] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.380469] device-mapper: uevent: version 1.0.3
[ 1.380713] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.380825] EISA: Probing bus 0 at eisa.0
[ 1.380832] EISA: Cannot allocate resource for mainboard
[ 1.380839] Cannot allocate resource for EISA slot 1
[ 1.380845] Cannot allocate resource for EISA slot 2
[ 1.380851] Cannot allocate resource for EISA slot 3
[ 1.380856] Cannot allocate resource for EISA slot 4
[ 1.380862] Cannot allocate resource for EISA slot 5
[ 1.380868] Cannot allocate resource for EISA slot 6
[ 1.380874] Cannot allocate resource for EISA slot 7
[ 1.380879] Cannot allocate resource for EISA slot 8
[ 1.380884] EISA: Detected 0 cards.
[ 1.380903] cpufreq-nforce2: No nForce2 chipset.
[ 1.381088] cpuidle: using governor ladder
[ 1.381393] cpuidle: using governor menu
[ 1.381399] EFI Variables Facility v0.08 2004-May-17
[ 1.381990] TCP cubic registered
[ 1.382299] NET: Registered protocol family 10
[ 1.383652] NET: Registered protocol family 17
[ 1.383666] Registering the dns_resolver key type
[ 1.383718] Using IPI No-Shortcut mode
[ 1.384164] PM: Hibernation image not present or could not be loaded.
[ 1.384198] registered taskstats version 1
[ 1.402160] Magic number: 8:62:681
[ 1.402331] rtc_cmos 00:03: setting system clock to 2012-08-10 11:39:37 UTC (1344598777)
[ 1.403083] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.403088] EDD information not available.
[ 1.403449] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.507593] ata2.00: CFA: SSDPAMM0008G1, Ver2.I0H, max UDMA/66
[ 1.507606] ata2.00: 15761088 sectors, multi 0: LBA
[ 1.512413] ata2.00: configured for UDMA/66
[ 1.512774] scsi 1:0:0:0: Direct-Access ATA SSDPAMM0008G1 Ver2 PQ: 0 ANSI: 5
[ 1.513164] sd 1:0:0:0: [sda] 15761088 512-byte logical blocks: (8.06 GB/7.51 GiB)
[ 1.513282] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.513410] sd 1:0:0:0: [sda] Write Protect is off
[ 1.513422] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.513533] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 1.516486] sda: sda1 sda2 < sda5 >
[ 1.517559] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.517694] Freeing unused kernel memory: 740k freed
[ 1.518456] Write protecting the kernel text: 5816k
[ 1.518597] Write protecting the kernel read-only data: 2376k
[ 1.518604] NX-protecting the kernel data: 4424k
[ 1.569361] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 1.569968] zram: num_devices not specified. Using default: 1
[ 1.569975] zram: Creating 1 devices ...
[ 1.580394] udevd[95]: starting version 175
[ 1.676097] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.814234] Adding 764924k swap on /dev/zram0. Priority:100 extents:1 across:764924k SS
[ 1.885389] wmi: Mapper loaded
[ 1.940106] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 1.945622] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.950843] ACPI: Video Device [OVGA] (multi-head: yes rom: yes post: no)
[ 1.997087] [drm] Initialized drm 1.1.0 20060810
[ 2.050365] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.050381] i915 0000:00:02.0: setting latency timer to 64
[ 2.051716] sdhci: Secure Digital Host Controller Interface driver
[ 2.051725] sdhci: Copyright(c) Pierre Ossman
[ 2.062664] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.062729] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.062797] r8169 0000:02:00.0: setting latency timer to 64
[ 2.062903] r8169 0000:02:00.0: irq 44 for MSI/MSI-X
[ 2.078180] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2382] (rev 0)
[ 2.078223] sdhci-pci 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.078311] sdhci-pci 0000:04:00.0: setting latency timer to 64
[ 2.078339] mmc0: no vmmc regulator found
[ 2.078435] Registered led device: mmc0::
[ 2.088377] r8169 0000:02:00.0: eth0: RTL8102e at 0xf8436000, 00:1e:68:b5:7d:e6, XID 04a00000 IRQ 44
[ 2.108461] mmc0: SDHCI controller on PCI [0000:04:00.0] using ADMA
[ 2.108509] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 2.108549] sdhci-pci 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.108569] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 2.108585] sdhci-pci 0000:04:00.2: PCI INT A disabled
[ 2.141173] mtrr: no more MTRRs available
[ 2.141183] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.143840] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.143852] [drm] Driver supports precise vblank timestamp query.
[ 2.175260] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.302147] mmc0: new SDHC card at address a7c1
[ 2.344796] mmcblk0: mmc0:a7c1 SD08G 7.42 GiB
[ 2.346430] mmcblk0:
[ 2.492208] [drm] initialized overlay support
[ 2.514615] fbcon: inteldrmfb (fb0) is primary device
[ 2.514780] Console: switching to colour frame buffer device 128x37
[ 2.514860] fb0: inteldrmfb frame buffer device
[ 2.514867] drm: registered panic notifier
[ 2.514914] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.167244] Btrfs loaded
[ 3.184966] xor: automatically using best checksumming function: pIII_sse
[ 3.204032] pIII_sse : 4850.000 MB/sec
[ 3.204043] xor: using function: pIII_sse (4850.000 MB/sec)
[ 3.205782] device-mapper: dm-raid45: initialized v0.2594b
[ 3.309104] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 3.309122] EXT4-fs (sda1): write access will be enabled during recovery
[ 15.071472] EXT4-fs (sda1): recovery complete
[ 15.255762] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 22.135080] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.146597] udevd[449]: starting version 175
[ 22.166653] Adding 1558524k swap on /dev/sda5. Priority:-1 extents:1 across:1558524k
[ 22.285408] lp: driver loaded but no devices found
[ 22.328778] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 23.167069] type=1400 audit(1344598799.259:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=652 comm="apparmor_parser"
[ 23.172252] type=1400 audit(1344598799.267:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=652 comm="apparmor_parser"
[ 23.173135] type=1400 audit(1344598799.267:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=652 comm="apparmor_parser"
[ 23.286062] intel_rng: FWH not detected
[ 23.303368] leds_ss4200: no LED devices found
[ 23.306723] jmb38x_ms 0000:04:00.3: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 23.306745] jmb38x_ms 0000:04:00.3: setting latency timer to 64
[ 23.496541] cfg80211: Calling CRDA to update world regulatory domain
[ 23.589116] Bluetooth: Core ver 2.16
[ 23.589193] NET: Registered protocol family 31
[ 23.589202] Bluetooth: HCI device and connection manager initialized
[ 23.589211] Bluetooth: HCI socket layer initialized
[ 23.589218] Bluetooth: L2CAP socket layer initialized
[ 23.589238] Bluetooth: SCO socket layer initialized
[ 23.613844] ppdev: user-space parallel port driver
[ 23.641344] Bluetooth: RFCOMM TTY layer initialized
[ 23.641364] Bluetooth: RFCOMM socket layer initialized
[ 23.641372] Bluetooth: RFCOMM ver 1.11
[ 23.647548] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.647558] Bluetooth: BNEP filters: protocol multicast
[ 23.655427] device-mapper: multipath: version 1.3.0 loaded
[ 23.711944] type=1400 audit(1344598799.803:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=762 comm="apparmor_parser"
[ 23.719759] type=1400 audit(1344598799.811:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=762 comm="apparmor_parser"
[ 23.730044] ath5k 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 23.730075] ath5k 0000:03:00.0: setting latency timer to 64
[ 23.730223] ath5k 0000:03:00.0: registered as 'phy0'
[ 24.033258] Linux video capture interface: v2.00
[ 24.116353] uvcvideo: Found UVC 1.00 device Acer Crystal Eye webcam (064e:d101)
[ 24.192091] input: Acer Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input6
[ 24.193621] usbcore: registered new interface driver uvcvideo
[ 24.193630] USB Video Class driver (1.1.1)
[ 24.234888] ath: EEPROM regdomain: 0x65
[ 24.234898] ath: EEPROM indicates we should expect a direct regpair map
[ 24.234909] ath: Country alpha2 being used: 00
[ 24.234915] ath: Regpair used: 0x65
[ 24.236259] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236272] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236280] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236290] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236298] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236308] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236316] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236326] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236334] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236344] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236352] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236362] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236370] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236380] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236388] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236397] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236405] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236415] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236423] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236433] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236441] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236451] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236459] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236469] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236477] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 24.236487] cfg80211: 2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[ 24.236495] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 24.237458] acerhdf: Acer Aspire One Fan driver, v.0.5.24
[ 24.237470] acerhdf: Fan control off, to enable do:
[ 24.237477] acerhdf: echo -n "enabled" > /sys/class/thermal/thermal_zone0/mode
[ 24.243150] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 24.289058] IR NEC protocol handler initialized
[ 24.298429] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 24.321605] IR RC5(x) protocol handler initialized
[ 24.336419] Registered led device: ath5k-phy0::rx
[ 24.340386] Registered led device: ath5k-phy0::tx
[ 24.340434] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 24.345270] IR RC6 protocol handler initialized
[ 24.354138] IR JVC protocol handler initialized
[ 24.370815] IR Sony protocol handler initialized
[ 24.405844] IR MCE Keyboard/mouse protocol handler initialized
[ 24.405973] dvb-usb: found a 'DVB-T TV Stick' in warm state.
[ 24.406002] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 24.412659] DVB: registering new adapter (DVB-T TV Stick)
[ 24.431400] lirc_dev: IR Remote Control driver registered, major 251
[ 24.434885] IR LIRC bridge handler initialized
[ 24.451470] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
[ 24.506343] psmouse serio2: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000
[ 24.561953] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 24.635205] init: failsafe main process (890) killed by TERM signal
[ 24.923163] RTL2832U check_tuner_type : FC0012 tuner on board...
[ 25.056880] type=1400 audit(1344598801.151:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1002 comm="apparmor_parser"
[ 25.061757] type=1400 audit(1344598801.155:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1001 comm="apparmor_parser"
[ 25.073711] type=1400 audit(1344598801.167:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1002 comm="apparmor_parser"
[ 25.074627] type=1400 audit(1344598801.167:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1002 comm="apparmor_parser"
[ 25.107778] r8169 0000:02:00.0: eth0: link down
[ 25.107792] r8169 0000:02:00.0: eth0: link down
[ 25.112648] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.114518] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.139046] type=1400 audit(1344598801.231:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1009 comm="apparmor_parser"
[ 25.147108] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.149544] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.331025] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 25.331178] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 25.331249] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 25.343912] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 25.343926] acer_wmi: Blacklisted hardware detected - not loading
[ 25.408461] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 25.409539] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 25.580216] DVB: registering adapter 0 frontend 0 (Realtek DVB-T RTL2832)...
[ 25.581952] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/input/input10
[ 25.582351] dvb-usb: schedule remote query interval to 287 msecs.
[ 25.582366] dvb-usb: DVB-T TV Stick successfully initialized and connected.
[ 25.582605] usbcore: registered new interface driver dvb_usb_rtl2832u
[ 25.585929] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 25.585943] cfg80211: World regulatory domain updated:
[ 25.585950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 25.585961] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.585971] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.585981] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 25.585991] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 25.586001] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 26.645556] r8169 0000:02:00.0: eth0: link up
[ 26.646136] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.068618] init: plymouth-stop pre-start process (1400) terminated with status 1
[ 36.784046] eth0: no IPv6 routers present
[ 75.749022] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s)
root@caslor-AOA110:~#