Ubuntu-gr Forum

Καλησπέρα μου έβγαλε το παρακάτω error είναι ανησυχητικό ? δεν θέλω να το ρισκάρω γιατί είναι σε server
thanx

Κώδικας: Επιλογή όλων

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 175 173 021 Pre-fail Always - 2233
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3580
5 Reallocated_Sector_Ct 0x0033 189 189 140 Pre-fail Always - 83
7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 084 084 000 Old_age Always - 11748
10 Spin_Retry_Count 0x0012 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1780
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 237
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3580
194 Temperature_Celsius 0x0022 104 090 000 Old_age Always - 39
196 Reallocated_Event_Count 0x0032 195 195 000 Old_age Always - 5
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 493
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 7600 hours (316 days + 16 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 57 f0 73 e0 Error: UNC at LBA = 0x0073f057 = 7598167

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 00 57 f0 73 03 00 00:12:44.353 READ DMA EXT
25 00 00 57 ef 73 03 00 00:12:44.351 READ DMA EXT
25 00 00 57 ee 73 03 00 00:12:44.350 READ DMA EXT
25 00 00 57 ed 73 03 00 00:12:44.349 READ DMA EXT
25 00 00 57 ec 73 03 00 00:12:44.348 READ DMA EXT

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 11745 -
# 2 Short offline Completed without error 00% 11725 -
# 3 Short offline Completed without error 00% 5402 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.