Ubuntu-gr Forum

ρε παιδιά σορι άλλα είμαι αρκετά άσχετος......

έχω κωλύματα του λαπτοπ πολα και αναγκαζομαι να το κληνω απο διακοπτη και μπαταρια .....
τσεκαρεται αν μποριται το δίσκο μπας και φταίει????

και τη κανουμαι????
ευχαριστώ εκ τον πρότερον.....
(υποτίθεται ότι είναι καινούριος άλλαξα πριν ένα μηνάι εβαλα ubuntu πανο απο win 7 μαϊμού έχασα τα δικά μου )

Κώδικας: Επιλογή όλων

=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M8 (AFT)
Device Model: SAMSUNG HN-M500MBB
Serial Number: S2R7J9CB906365
LU WWN Device Id: 5 0024e9 2061b6432
Firmware Version: 2AR10001
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Thu Oct 17 00:10:57 2013 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6600) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 110) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 5199
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 081 079 025 Pre-fail Always - 5893
4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1979
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 4588
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 093 093 000 Old_age Always - 7160
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1965
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 15113824
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 902
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 055 046 000 Old_age Always - 45 (Min/Max 13/55)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 7
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 001 001 000 Old_age Always - 52036
223 Load_Retry_Count 0x0032 093 093 000 Old_age Always - 7160
225 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 143217

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Τα αποτελέσματα εντολών από το τερματικό τα βάζουμε μέσα σε [cοde]αποτελέσματα[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι . Δες εδώ πως.