Ubuntu-gr Forum

Learner έγραψε:Δεν νομίζω ότι είναι για πέταμα οι δίσκοι. Έχουν κάποια λάθη, θέλουν προσοχή, αλλά μπορείς να τους δουλέψεις ακόμη. Μην νομίζεις ότι το 40 reallocated sectors είναι σημαντική τιμή για έναν δίσκο 3TB.
Απλά παρακολούθα/σύγκρινε τις τιμές ανά μήνα να δεις κατά πόσο αυξάνονται. Έχω δίσκο 1TB με χειρότερες τιμές από αυτές που βλέπω εδώ και τον δουλεύω ακόμη και με λειτουργικό σύστημα. Ναι, κάποια στιγμή θα τα παίξει το ξέρω (έχω πάρει τα backup μου), αλλά μέχρι τότε, δουλεύει μια χαρά.

Κώδικας: Επιλογή όλων

ATA Error Count: 2060 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2060 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 6d+23:28:32.109 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 6d+23:28:32.108 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 6d+23:28:32.108 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 6d+23:28:32.108 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 6d+23:28:32.107 IDENTIFY DEVICE

Error 2059 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 6d+23:28:29.233 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 6d+23:28:29.233 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 6d+23:28:29.232 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 6d+23:28:29.232 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 6d+23:28:29.232 IDENTIFY DEVICE

Error 2058 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 6d+23:28:26.349 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 6d+23:28:26.349 READ FPDMA QUEUED
60 00 00 ff ff ff 4f 00 6d+23:28:26.349 READ FPDMA QUEUED
60 00 80 ff ff ff 4f 00 6d+23:28:26.348 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 6d+23:28:26.348 SET FEATURES [Enable SATA feature]

Error 2057 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 6d+23:28:23.456 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 6d+23:28:23.456 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 6d+23:28:23.456 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 6d+23:28:23.456 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 6d+23:28:23.456 SET FEATURES [Set transfer mode]

Error 2056 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 ff ff ff 4f 00 6d+23:28:20.581 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 6d+23:28:20.581 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 6d+23:28:20.581 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 6d+23:28:20.580 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 6d+23:28:20.580 SET FEATURES [Set transfer mode]