Δημοσιεύτηκε: 23 Μαρ 2017, 10:57
από lepidas
Φτιάχνω ένα νέο backup plan,
εξετάζοντας με smartctl ένα εξ.δίσκο που είναι συνδεδεμένος σε ένα mate 16.04 μέσω usb ωστε να δω αν θα κραταω εκει το backup
μου έβγαλε το εξής μήνυμα
Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/sda
smartctl 6.5 2016-05-07 r4318 [armv7l-linux-3.10.104-128] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sda: Unknown USB bridge [0x0bc2:0xab34 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

αν βάλω device /dev/sda1 λέει...SMART support is: Disabled

Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/sda1
smartctl 6.5 2016-05-07 r4318 [armv7l-linux-3.10.104-128] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Seagate
Product:              Backup+  Desk
Revision:             040B
Compliance:           SPC-4
User Capacity:        3,000,592,981,504 bytes [3.00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
Logical Unit id:      0x5000000000000001
Serial number:        NA7DW515
Device type:          disk
Local Time is:        Thu Mar 23 08:53:38 2017 CET
SMART support is:     Available - device has SMART capability.
SMART support is:     Disabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging


Όμως μέσω disks μπορώ να δω το smartctl