Πρόβλημα στη εκίνηση με lubuntu 16.04

...hardware-drivers για desktops & laptops

Συντονιστής: adem1

Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό metfm » 09 Μαρ 2017, 15:43

καλησπέρα και συγχαρητήρια για το ομορφο έργο σας.
εχω εγκαταστήσει σε νετμπουκ ενος φίλου τα lubuntu 16.04. το νετμπουκ ειναι acer kav 10.

ολα δουλευουν κανονικα εκτος απο ενα μικρο πρόβλημα στην εκιννηση .ανοιγω το νετμπουκ με το πρασινο κουμπι δεξια οπως φαινεται στην φωτο



εμφανιζεται η οθονη με το σημα lubuntu



μετα απο μερικα δευτερολεπτα σβηνει η οθονη και το λαμπακι αναβοσβηνει κοκκινο, σαν να μπαινει σε αναμονη



το αφηνω 8-10 φορες να αναβοσβησει το παταω γινεται πρασινο μου εμφανιζει κωδικους μπαινω κανονικα και ολα ενταξει μετα. ευχαριστω πολυ.
Τελευταία επεξεργασία από the_eye και 26 Μαρ 2017, 22:22, έχει επεξεργασθεί 2 φορά/ες συνολικά
Αιτία: Τις μεγάλες εικόνες τις βάζουμε μέσα σε [ThumbnailPop] bbcode
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubunru 16.04

Δημοσίευσηαπό the_eye » 09 Μαρ 2017, 19:46

Τις εικόνες καλύτερα βάλ τες εδώ http://imagebin.ubuntu-gr.org/
Το δοκίμασες με το netbook στον φορτιστή ;
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubunru 16.04

Δημοσίευσηαπό metfm » 09 Μαρ 2017, 21:24

ναι το νετμπουκ στον φορτιστη ηταν.
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubunru 16.04

Δημοσίευσηαπό the_eye » 09 Μαρ 2017, 22:42

Δώσε μας και το αποτέλεσμα της εντολής dmesg στο τερματικό.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubunru 16.04

Δημοσίευσηαπό lepidas » 09 Μαρ 2017, 22:43

Σε αναζήτηση στο ίντερνετ διαβάζω οτι αυτό συνήθως προκαλείται απο κάτι που έχει σχέση με την παροχή ρεύματος, ίσως μια αλλαγή στο grub config αλλά δεν ξέρω τι....
Δημήτρη καλώς όρισες στο forum :)
Άβαταρ μέλους
lepidas
superbTUX
superbTUX
 
Δημοσιεύσεις: 3326
Εγγραφή: 11 Μάιος 2011, 11:10
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό metfm » 09 Μαρ 2017, 22:57

the_eye έγραψε:Δώσε μας και το αποτέλεσμα της εντολής dmesg στο τερματικό.


Κώδικας: Επιλογή όλων
es: 519485
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-41-generic root=UUID=e79866ed-b118-4146-80f2-14b032d423e0 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: microcode updated early to revision 0x218, date = 2009-04-10
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0007f700)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2010600K/2086860K available (8250K kernel code, 845K rwdata, 3332K rodata, 988K init, 852K bss, 76260K reserved, 0K cma-reserved, 1173852K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xdac27000 - 0xdad1e000   ( 988 kB)
                     .data : 0xda80eed7 - 0xdac25680   (4185 kB)
                     .text : 0xda000000 - 0xda80eed7   (8251 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 32.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[    0.000000] NR_IRQS:2304 nr_irqs:440 16
[    0.000000] CPU 0 irqstacks, hard=f603e000 soft=f6080000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 2097152 bytes of page_ext
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.372 MHz processor
[    0.004023] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.74 BogoMIPS (lpj=6649488)
[    0.004031] pid_max: default: 32768 minimum: 301
[    0.004096] ACPI: Core revision 20160422
[    0.022242] ACPI: 2 ACPI AML tables successfully acquired and loaded

[    0.022333] Security Framework initialized
[    0.022337] Yama: becoming mindful.
[    0.022376] AppArmor: AppArmor initialized
[    0.022490] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.022494] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.023141] Disabled fast string operations
[    0.023147] CPU: Physical Processor ID: 0
[    0.023149] CPU: Processor Core ID: 0
[    0.023157] mce: CPU supports 5 MCE banks
[    0.023170] CPU0: Thermal monitoring enabled (TM2)
[    0.023179] process: using mwait in idle threads
[    0.023192] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[    0.023195] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.024030] Freeing SMP alternatives memory: 32K (dad1e000 - dad26000)
[    0.028022] ftrace: allocating 32597 entries in 64 pages
[    0.048203] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.048206] smpboot: Max logical packages: 2
[    0.048211] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.048726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.092000] smpboot: CPU0: Intel(R) Atom(TM) CPU N280   @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[    0.092000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[    0.092000] ... version:                3
[    0.092000] ... bit width:              40
[    0.092000] ... generic registers:      2
[    0.092000] ... value mask:             000000ffffffffff
[    0.092000] ... max period:             000000007fffffff
[    0.092000] ... fixed-purpose events:   3
[    0.092000] ... event mask:             0000000700000003
[    0.092000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.092000] CPU 1 irqstacks, hard=f639e000 soft=f63a0000
[    0.092000] x86: Booting SMP configuration:
[    0.092000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.008000] Disabled fast string operations
[    0.092132] x86: Booted up 1 node, 2 CPUs
[    0.092132] smpboot: Total of 2 processors activated (6649.48 BogoMIPS)
[    0.092889] devtmpfs: initialized
[    0.093013] evm: security.selinux
[    0.093016] evm: security.SMACK64
[    0.093017] evm: security.SMACK64EXEC
[    0.093019] evm: security.SMACK64TRANSMUTE
[    0.093020] evm: security.SMACK64MMAP
[    0.093022] evm: security.ima
[    0.093023] evm: security.capability
[    0.093092] PM: Registering ACPI NVS region [mem 0x7f66d000-0x7f6befff] (335872 bytes)
[    0.093092] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.093092] pinctrl core: initialized pinctrl subsystem
[    0.093092] RTC time: 19:50:53, date: 03/09/17
[    0.093128] NET: Registered protocol family 16
[    0.096123] EISA bus registered
[    0.108015] cpuidle: using governor ladder
[    0.120015] cpuidle: using governor menu
[    0.120018] PCCT header not found.
[    0.120158] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.120160] Simple Boot Flag at 0x44 set to 0x1
[    0.120190] ACPI: bus type PCI registered
[    0.120195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.120408] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.120413] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.120415] PCI: Using MMCONFIG for extended config space
[    0.120417] PCI: Using configuration type 1 for base access
[    0.136116] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.136350] ACPI: Added _OSI(Module Device)
[    0.136354] ACPI: Added _OSI(Processor Device)
[    0.136356] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.136359] ACPI: Added _OSI(Processor Aggregator Device)
[    0.136787] ACPI: Executed 1 blocks of module-level executable AML code
[    0.142160] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.145932] ACPI: Dynamic OEM Table Load:
[    0.145948] ACPI: SSDT 0x00000000F63A3400 0001F7 (v02 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.147046] ACPI: Dynamic OEM Table Load:
[    0.147059] ACPI: SSDT 0x00000000F63A2E00 0001C7 (v02 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.148519] ACPI: Dynamic OEM Table Load:
[    0.148531] ACPI: SSDT 0x00000000F60D9F00 0000D0 (v02 PmRef  Cpu1Ist  00003000 INTL 20051117)
[    0.149543] ACPI: Dynamic OEM Table Load:
[    0.149555] ACPI: SSDT 0x00000000F60A7480 000083 (v02 PmRef  Cpu1Cst  00003000 INTL 20051117)
[    0.151076] ACPI : EC: EC started
[    0.151372] ACPI: Interpreter enabled
[    0.151428] ACPI: (supports S0 S3 S4 S5)
[    0.151431] ACPI: Using IOAPIC for interrupt routing
[    0.151515] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.321607] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    0.324930] ACPI: Power Resource [FN00] (on)
[    0.327097] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.327111] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.327269] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160422/dsfield-211)
[    0.327282] ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node f6091588), AE_ALREADY_EXISTS (20160422/psparse-542)
[    0.327309] acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
[    0.328651] PCI host bridge to bus 0000:00
[    0.328658] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.328663] pci_bus 0000:00: root bus resource [io  0x0d00-0xefff window]
[    0.328668] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.328672] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff window]
[    0.328677] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.328697] pci 0000:00:00.0: [8086:27ac] type 00 class 0x060000
[    0.328994] pci 0000:00:02.0: [8086:27ae] type 00 class 0x030000
[    0.329011] pci 0000:00:02.0: reg 0x10: [mem 0x96280000-0x962fffff]
[    0.329020] pci 0000:00:02.0: reg 0x14: [io  0x50f0-0x50f7]
[    0.329029] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
[    0.329038] pci 0000:00:02.0: reg 0x1c: [mem 0x96300000-0x9633ffff]
[    0.329324] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.329339] pci 0000:00:02.1: reg 0x10: [mem 0x96200000-0x9627ffff]
[    0.329663] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.329696] pci 0000:00:1b.0: reg 0x10: [mem 0x96340000-0x96343fff 64bit]
[    0.329826] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.329965] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.330136] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.330272] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.330406] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.330575] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.330702] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.330835] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.331005] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.331140] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.331273] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.331439] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.331502] pci 0000:00:1d.0: reg 0x20: [io  0x50a0-0x50bf]
[    0.331718] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.331883] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.331947] pci 0000:00:1d.1: reg 0x20: [io  0x5080-0x509f]
[    0.332177] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.332343] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.332407] pci 0000:00:1d.2: reg 0x20: [io  0x5060-0x507f]
[    0.332615] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.332787] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.332850] pci 0000:00:1d.3: reg 0x20: [io  0x5040-0x505f]
[    0.333060] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.333247] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.333274] pci 0000:00:1d.7: reg 0x10: [mem 0x96344400-0x963447ff]
[    0.333393] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.333566] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.333727] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.334058] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.334188] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.334198] pci 0000:00:1f.0: quirk: [io  0x0500-0x053f] claimed by ICH6 GPIO
[    0.334206] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 0003)
[    0.334212] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[    0.334495] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.334517] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.334532] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.334546] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.334561] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.334576] pci 0000:00:1f.1: reg 0x20: [io  0x50c0-0x50cf]
[    0.334605] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.334609] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.334612] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.334616] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.334872] pci 0000:00:1f.2: [8086:27c5] type 00 class 0x010601
[    0.334899] pci 0000:00:1f.2: reg 0x10: [io  0x50d8-0x50df]
[    0.334914] pci 0000:00:1f.2: reg 0x14: [io  0x50fc-0x50ff]
[    0.334928] pci 0000:00:1f.2: reg 0x18: [io  0x50d0-0x50d7]
[    0.334943] pci 0000:00:1f.2: reg 0x1c: [io  0x50f8-0x50fb]
[    0.334958] pci 0000:00:1f.2: reg 0x20: [io  0x5020-0x502f]
[    0.334972] pci 0000:00:1f.2: reg 0x24: [mem 0x96344000-0x963443ff]
[    0.335041] pci 0000:00:1f.2: PME# supported from D3hot
[    0.335324] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.335405] pci 0000:00:1f.3: reg 0x20: [io  0x5000-0x501f]
[    0.335936] acpiphp: Slot [1] registered
[    0.336081] pci 0000:01:00.0: [14e4:4315] type 00 class 0x028000
[    0.336127] pci 0000:01:00.0: reg 0x10: [mem 0x95100000-0x95103fff 64bit]
[    0.336334] pci 0000:01:00.0: supports D1 D2
[    0.336338] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.348082] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.348091] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.348098] pci 0000:00:1c.0:   bridge window [mem 0x95100000-0x961fffff]
[    0.348109] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.348271] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.348279] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.348287] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff]
[    0.348297] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.348486] pci 0000:03:00.0: [1969:1026] type 00 class 0x020000
[    0.348529] pci 0000:03:00.0: reg 0x10: [mem 0x93000000-0x9303ffff 64bit]
[    0.348549] pci 0000:03:00.0: reg 0x18: [io  0x1000-0x107f]
[    0.348716] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.348936] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.348953] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.348960] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.348968] pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x940fffff]
[    0.348978] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    0.349152] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.349170] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.349174] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xefff window] (subtractive decode)
[    0.349179] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.349183] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff window] (subtractive decode)
[    0.349221] pci_bus 0000:00: on NUMA node 0
[    0.428411] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.428613] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.428819] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.429017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.429212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.429409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.429605] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.429802] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.431663] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.431829] ACPI : EC: EC stopped
[    0.431935] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[    0.431938] ACPI : EC: EC started
[    0.433324] SCSI subsystem initialized
[    0.433481] libata version 3.00 loaded.
[    0.433570] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.433570] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.433570] vgaarb: loaded
[    0.433570] vgaarb: bridge control possible 0000:00:02.0
[    0.433570] ACPI: bus type USB registered
[    0.433570] usbcore: registered new interface driver usbfs
[    0.433570] usbcore: registered new interface driver hub
[    0.433570] usbcore: registered new device driver usb
[    0.433570] PCI: Using ACPI for IRQ routing
[    0.445272] PCI: pci_cache_line_size set to 64 bytes
[    0.445440] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.445445] e820: reserve RAM buffer [mem 0x7f576000-0x7fffffff]
[    0.445450] e820: reserve RAM buffer [mem 0x7f66d000-0x7fffffff]
[    0.445453] e820: reserve RAM buffer [mem 0x7f6ef000-0x7fffffff]
[    0.445456] e820: reserve RAM buffer [mem 0x7f700000-0x7fffffff]
[    0.445883] NetLabel: Initializing
[    0.445886] NetLabel:  domain hash size = 128
[    0.445887] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.445922] NetLabel:  unlabeled traffic allowed by default
[    0.446014] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.446014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.446014] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.448067] clocksource: Switched to clocksource hpet
[    0.474635] VFS: Disk quotas dquot_6.6.0
[    0.474682] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.474975] AppArmor: AppArmor Filesystem Enabled
[    0.475168] pnp: PnP ACPI init
[    0.552470] pnp 00:00: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.2 BAR 13 [io  0x1000-0x2fff]
[    0.552648] system 00:00: [io  0x0200-0x020f] has been reserved
[    0.552656] system 00:00: [io  0x0600-0x060f] has been reserved
[    0.552661] system 00:00: [io  0x0610] has been reserved
[    0.552666] system 00:00: [io  0x0800-0x080f] has been reserved
[    0.552671] system 00:00: [io  0x0400-0x047f] has been reserved
[    0.552677] system 00:00: [io  0x0500-0x053f] has been reserved
[    0.552682] system 00:00: [io  0xff2c-0xff2f] has been reserved
[    0.552689] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.552694] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.552700] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.552705] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.552710] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.552716] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.552721] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.552731] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.552890] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.553136] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.553385] pnp 00:03: Plug and Play ACPI device, IDs SYN1b1c SYN1b00 SYN0002 PNP0f13 (active)
[    0.553652] pnp: PnP ACPI: found 4 devices
[    0.553658] PnPBIOS: Disabled by ACPI PNP
[    0.597043] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.597126] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.597133] pci 0000:00:1c.0:   bridge window [io  0x4000-0x4fff]
[    0.597143] pci 0000:00:1c.0:   bridge window [mem 0x95100000-0x961fffff]
[    0.597151] pci 0000:00:1c.0:   bridge window [mem 0x90000000-0x90ffffff 64bit pref]
[    0.597162] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.597167] pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
[    0.597176] pci 0000:00:1c.1:   bridge window [mem 0x94100000-0x950fffff]
[    0.597183] pci 0000:00:1c.1:   bridge window [mem 0x91000000-0x91ffffff 64bit pref]
[    0.597194] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.597199] pci 0000:00:1c.2:   bridge window [io  0x1000-0x2fff]
[    0.597208] pci 0000:00:1c.2:   bridge window [mem 0x93000000-0x940fffff]
[    0.597215] pci 0000:00:1c.2:   bridge window [mem 0x92000000-0x92ffffff 64bit pref]
[    0.597226] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.597247] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.597251] pci_bus 0000:00: resource 5 [io  0x0d00-0xefff window]
[    0.597256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.597260] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.597265] pci_bus 0000:01: resource 0 [io  0x4000-0x4fff]
[    0.597269] pci_bus 0000:01: resource 1 [mem 0x95100000-0x961fffff]
[    0.597274] pci_bus 0000:01: resource 2 [mem 0x90000000-0x90ffffff 64bit pref]
[    0.597278] pci_bus 0000:02: resource 0 [io  0x3000-0x3fff]
[    0.597282] pci_bus 0000:02: resource 1 [mem 0x94100000-0x950fffff]
[    0.597287] pci_bus 0000:02: resource 2 [mem 0x91000000-0x91ffffff 64bit pref]
[    0.597291] pci_bus 0000:03: resource 0 [io  0x1000-0x2fff]
[    0.597296] pci_bus 0000:03: resource 1 [mem 0x93000000-0x940fffff]
[    0.597300] pci_bus 0000:03: resource 2 [mem 0x92000000-0x92ffffff 64bit pref]
[    0.597305] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.597309] pci_bus 0000:04: resource 5 [io  0x0d00-0xefff window]
[    0.597313] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.597318] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff window]
[    0.597404] NET: Registered protocol family 2
[    0.597885] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.597929] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.597983] TCP: Hash tables configured (established 8192 bind 8192)
[    0.598032] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.598048] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.598161] NET: Registered protocol family 1
[    0.598208] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.600774] PCI: CLS 0 bytes, default 64
[    0.600934] Trying to unpack rootfs image as initramfs...
[    2.385671] Freeing initrd memory: 39384K (f3304000 - f597a000)
[    2.386115] Scanning for low memory corruption every 60 seconds
[    2.387209] futex hash table entries: 512 (order: 3, 32768 bytes)
[    2.387266] audit: initializing netlink subsys (disabled)
[    2.387316] audit: type=2000 audit(1489089055.384:1): initialized
[    2.388305] Initialise system trusted keyrings
[    2.388554] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.396227] zbud: loaded
[    2.397655] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.398498] fuse init (API version 7.25)
[    2.399076] Allocating IMA blacklist keyring.
[    2.402489] Key type asymmetric registered
[    2.402495] Asymmetric key parser 'x509' registered
[    2.402540] bounce: pool size: 64 pages
[    2.402705] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.402795] io scheduler noop registered
[    2.402799] io scheduler deadline registered (default)
[    2.403057] io scheduler cfq registered
[    2.404058] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    2.405023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.405048] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.405190] vesafb: mode is 800x600x32, linelength=3200, pages=0
[    2.405192] vesafb: scrolling: redraw
[    2.405196] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    2.405234] vesafb: framebuffer at 0x80000000, mapped to 0xf8600000, using 1920k, total 1920k
[    2.405591] Console: switching to colour frame buffer device 100x37
[    2.405626] fb0: VESA VGA frame buffer device
[    2.405686] intel_idle: MWAIT substates: 0x20220
[    2.405689] intel_idle: v0.4.1 model 0x1C
[    2.405705] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[    2.405971] intel_idle: lapic_timer_reliable_states 0x2
[    2.484383] ACPI: AC Adapter [AC] (off-line)
[    2.484636] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.484643] ACPI: Power Button [PWRB]
[    2.484820] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.484873] ACPI: Lid Switch [LID0]
[    2.485039] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.485045] ACPI: Sleep Button [SLPB]
[    2.485237] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.485243] ACPI: Power Button [PWRF]
[    2.486645] thermal LNXTHERM:00: registered as thermal_zone0
[    2.486649] ACPI: Thermal Zone [THRM] (27 C)
[    2.486759] GHES: HEST is not enabled!
[    2.486970] isapnp: Scanning for PnP cards...
[    2.487222] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    2.797543] isapnp: No Plug & Play device found
[    3.124624] random: fast init done
[    3.284140] ACPI: Battery Slot [BAT0] (battery present)
[    3.284632] Linux agpgart interface v0.103
[    3.302304] brd: module loaded
[    3.307819] loop: module loaded
[    3.308449] ata_piix 0000:00:1f.1: version 2.13
[    3.310773] scsi host0: ata_piix
[    3.311143] scsi host1: ata_piix
[    3.311335] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x50c0 irq 14
[    3.311338] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x50c8 irq 15
[    3.311690] libphy: Fixed MDIO Bus: probed
[    3.311694] tun: Universal TUN/TAP device driver, 1.6
[    3.311695] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.311880] PPP generic driver version 2.4.2
[    3.311976] ata2: port disabled--ignoring
[    3.312190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.312215] ehci-pci: EHCI PCI platform driver
[    3.312574] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    3.312594] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    3.312617] ehci-pci 0000:00:1d.7: debug port 1
[    3.316562] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    3.316602] ehci-pci 0000:00:1d.7: irq 16, io mem 0x96344400
[    3.332131] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.332383] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.332388] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.332392] usb usb1: Product: EHCI Host Controller
[    3.332395] usb usb1: Manufacturer: Linux 4.8.0-41-generic ehci_hcd
[    3.332399] usb usb1: SerialNumber: 0000:00:1d.7
[    3.332893] hub 1-0:1.0: USB hub found
[    3.332922] hub 1-0:1.0: 8 ports detected
[    3.333665] ehci-platform: EHCI generic platform driver
[    3.333719] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.333732] ohci-pci: OHCI PCI platform driver
[    3.333776] ohci-platform: OHCI generic platform driver
[    3.333807] uhci_hcd: USB Universal Host Controller Interface driver
[    3.334138] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.334156] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    3.334170] uhci_hcd 0000:00:1d.0: detected 2 ports
[    3.334206] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000050a0
[    3.334388] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    3.334393] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.334397] usb usb2: Product: UHCI Host Controller
[    3.334401] usb usb2: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[    3.334404] usb usb2: SerialNumber: 0000:00:1d.0
[    3.334876] hub 2-0:1.0: USB hub found
[    3.334898] hub 2-0:1.0: 2 ports detected
[    3.335529] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.335547] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    3.335560] uhci_hcd 0000:00:1d.1: detected 2 ports
[    3.335615] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00005080
[    3.335793] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.335798] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.335802] usb usb3: Product: UHCI Host Controller
[    3.335805] usb usb3: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[    3.335809] usb usb3: SerialNumber: 0000:00:1d.1
[    3.336325] hub 3-0:1.0: USB hub found
[    3.336347] hub 3-0:1.0: 2 ports detected
[    3.336984] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.337001] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    3.337014] uhci_hcd 0000:00:1d.2: detected 2 ports
[    3.337077] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005060
[    3.337257] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.337262] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.337266] usb usb4: Product: UHCI Host Controller
[    3.337270] usb usb4: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[    3.337273] usb usb4: SerialNumber: 0000:00:1d.2
[    3.337735] hub 4-0:1.0: USB hub found
[    3.337758] hub 4-0:1.0: 2 ports detected
[    3.338403] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.338421] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    3.338434] uhci_hcd 0000:00:1d.3: detected 2 ports
[    3.338494] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005040
[    3.338668] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    3.338672] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.338676] usb usb5: Product: UHCI Host Controller
[    3.338680] usb usb5: Manufacturer: Linux 4.8.0-41-generic uhci_hcd
[    3.338683] usb usb5: SerialNumber: 0000:00:1d.3
[    3.339147] hub 5-0:1.0: USB hub found
[    3.339169] hub 5-0:1.0: 2 ports detected
[    3.339741] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[    3.381564] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.381581] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.382185] mousedev: PS/2 mouse device common for all mice
[    3.384371] rtc_cmos 00:01: RTC can wake from S4
[    3.384680] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    3.384729] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.384755] i2c /dev entries driver
[    3.384977] device-mapper: uevent: version 1.0.3
[    3.385266] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[    3.385360] platform eisa.0: Probing EISA bus 0
[    3.385366] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    3.385372] platform eisa.0: Cannot allocate resource for EISA slot 1
[    3.385377] platform eisa.0: Cannot allocate resource for EISA slot 2
[    3.385381] platform eisa.0: Cannot allocate resource for EISA slot 3
[    3.385386] platform eisa.0: Cannot allocate resource for EISA slot 4
[    3.385391] platform eisa.0: Cannot allocate resource for EISA slot 5
[    3.385395] platform eisa.0: Cannot allocate resource for EISA slot 6
[    3.385400] platform eisa.0: Cannot allocate resource for EISA slot 7
[    3.385405] platform eisa.0: Cannot allocate resource for EISA slot 8
[    3.385408] platform eisa.0: EISA: Detected 0 cards
[    3.385422] cpufreq_nforce2: No nForce2 chipset
[    3.385474] ledtrig-cpu: registered to indicate activity on CPUs
[    3.386263] NET: Registered protocol family 10
[    3.386990] NET: Registered protocol family 17
[    3.387013] Key type dns_resolver registered
[    3.387724] microcode: sig=0x106c2, pf=0x4, revision=0x218
[    3.387890] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    3.387900] Using IPI No-Shortcut mode
[    3.388177] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f64d7ca83, max_idle_ns: 440795287011 ns
[    3.388503] registered taskstats version 1
[    3.388515] Loading compiled-in X.509 certificates
[    3.405209] Loaded X.509 cert 'Build time autogenerated kernel key: 27f4df0ee522f0f22f04ae9768d4ac3a476d412a'
[    3.405275] zswap: loaded using pool lzo/zbud
[    3.417960] Key type big_key registered
[    3.422983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.424633] Key type trusted registered
[    3.430974] Key type encrypted registered
[    3.430984] AppArmor: AppArmor sha1 policy hashing enabled
[    3.430989] ima: No TPM chip found, activating TPM-bypass!
[    3.431040] evm: HMAC attrs: 0x1
[    3.431752]   Magic number: 9:460:849
[    3.431805]  index1: hash matches
[    3.431808]  index1: hash matches
[    3.431851] graphics fbcon: hash matches
[    3.431969] rtc_cmos 00:01: setting system clock to 2017-03-09 19:50:56 UTC (1489089056)
[    3.433712] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.433715] EDD information not available.
[    3.433979] PM: Hibernation image not present or could not be loaded.
[    3.469066] Freeing unused kernel memory: 988K (dac27000 - dad1e000)
[    3.469179] Write protecting the kernel text: 8252k
[    3.469412] Write protecting the kernel read-only data: 3340k
[    3.469415] NX-protecting the kernel data: 6084k
[    3.469892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.660126] usb 1-2: new high-speed USB device number 2 using ehci-pci
[    3.739095] wmi: Mapper loaded
[    3.746404] ACPI: Video Device [OVGA] (multi-head: yes  rom: yes  post: no)
[    3.746670] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[    3.747223] acpi device:18: registered as cooling_device3
[    3.747631] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.810365] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[    3.912671] [drm] Initialized drm 1.1.0 20060810
[    3.990480] usb 1-2: New USB device found, idVendor=04f2, idProduct=b084
[    3.990488] usb 1-2: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    3.990494] usb 1-2: Product: Webcam
[    3.990499] usb 1-2: Manufacturer: Chicony Electronics Co., Ltd.
[    4.238414] ahci 0000:00:1f.2: version 3.0
[    4.238958] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    4.239047] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    4.239056] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pio slum part
[    4.260600] scsi host2: ahci
[    4.274683] scsi host3: ahci
[    4.276640] scsi host4: ahci
[    4.277322] scsi host5: ahci
[    4.277733] ata3: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344100 irq 27
[    4.277739] ata4: DUMMY
[    4.277745] ata5: SATA max UDMA/133 abar m1024@0x96344000 port 0x96344200 irq 27
[    4.277749] ata6: DUMMY
[    4.283086] pci 0000:00:00.0: Intel 945GME Chipset
[    4.283143] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    4.283229] pci 0000:00:00.0: detected 8192K stolen memory
[    4.283332] [drm] Memory usable by graphics device = 256M
[    4.283342] checking generic (80000000 1e0000) vs hw (80000000 10000000)
[    4.283346] fb: switching to inteldrmfb from VESA VGA
[    4.283438] Console: switching to colour dummy device 80x25
[    4.283772] [drm] Replacing VGA console driver
[    4.283816] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.283819] [drm] Driver supports precise vblank timestamp query.
[    4.286811] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    4.366580] ATL1E 0000:03:00.0 enp3s0: renamed from eth0
[    4.536076] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    4.591848] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.593202] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    4.679539] ata3.00: ATA-8: WDC WD3200LPVT-00G33T0, 01.01A01, max UDMA/133
[    4.679545] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    4.681061] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    4.681267] ata3.00: configured for UDMA/133
[    4.681669] scsi 2:0:0:0: Direct-Access     ATA      WDC WD3200LPVT-0 1A01 PQ: 0 ANSI: 5
[    4.713461] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    4.713469] sd 2:0:0:0: [sda] 4096-byte physical blocks
[    4.713576] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    4.714409] sd 2:0:0:0: [sda] Write Protect is off
[    4.714418] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.714522] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.729251] [drm] RC6 disabled, disabling runtime PM support
[    4.729316] [drm] initialized overlay support
[    4.731341] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 0
[    4.732188] usb 3-1: New USB device found, idVendor=046d, idProduct=c52f
[    4.732196] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.732202] usb 3-1: Product: USB Receiver
[    4.732208] usb 3-1: Manufacturer: Logitech
[    4.770914]  sda: sda1 sda2 < sda5 >
[    4.773549] hidraw: raw HID events driver (C) Jiri Kosina
[    4.774244] sd 2:0:0:0: [sda] Attached SCSI disk
[    4.807331] usbcore: registered new interface driver usbhid
[    4.807335] usbhid: USB HID core driver
[    4.812635] ------------[ cut here ]------------
[    4.812791] WARNING: CPU: 0 PID: 6 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/i915/intel_fbdev.c:416 intel_fb_initial_config+0x366/0x680 [i915]
[    4.812794] WARN_ON(!connector->state->crtc)
[    4.812797] Modules linked in:
[    4.812800]  usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[    4.812839] CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 4.8.0-41-generic #44-Ubuntu
[    4.812842] Hardware name: Acer       Aspire one      /Aspire one      , BIOS V1.05 02/20/2009
[    4.812853] Workqueue: events_unbound async_run_entry_fn
[    4.812858]  dab58967 95caf702 00000286 f634bd10 da3db775 f634bd54 f8a79528 f634bd40
[    4.812873]  da0720ea f8a858a3 f634bd74 00000006 f8a79528 000001a0 f8a22236 000001a0
[    4.812887]  00000001 00000000 f5623c00 f634bd60 da072156 00000009 00000000 f634bd54
[    4.812900] Call Trace:
[    4.812912]  [<da3db775>] dump_stack+0x58/0x73
[    4.812920]  [<da0720ea>] __warn+0xea/0x110
[    4.813056]  [<f8a22236>] ? intel_fb_initial_config+0x366/0x680 [i915]
[    4.813063]  [<da072156>] warn_slowpath_fmt+0x46/0x60
[    4.813199]  [<f8a22236>] intel_fb_initial_config+0x366/0x680 [i915]
[    4.813207]  [<da04baff>] ? native_smp_send_reschedule+0x1f/0x40
[    4.813213]  [<da099038>] ? resched_curr+0x68/0xc0
[    4.813349]  [<f8a21ed0>] ? intelfb_create+0x540/0x540 [i915]
[    4.813382]  [<f85d1623>] drm_setup_crtcs+0x1c3/0xa40 [drm_kms_helper]
[    4.813389]  [<da099e2f>] ? ttwu_do_activate+0x5f/0x70
[    4.813395]  [<da09a804>] ? try_to_wake_up+0x44/0x350
[    4.813405]  [<da80a64e>] ? __mutex_unlock_slowpath+0x5e/0x80
[    4.813437]  [<f85d218c>] drm_fb_helper_initial_config+0xbc/0x420 [drm_kms_helper]
[    4.813444]  [<da099cd7>] ? ttwu_do_wakeup+0x17/0x110
[    4.813581]  [<f8a22b96>] intel_fbdev_initial_config+0x16/0x30 [i915]
[    4.813588]  [<da092655>] async_run_entry_fn+0x35/0x180
[    4.813596]  [<da08a978>] process_one_work+0x1b8/0x420
[    4.813603]  [<da08ac17>] worker_thread+0x37/0x4b0
[    4.813609]  [<da08abe0>] ? process_one_work+0x420/0x420
[    4.813615]  [<da090006>] kthread+0xa6/0xc0
[    4.813623]  [<da80c922>] ret_from_kernel_thread+0xe/0x24
[    4.813629]  [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[    4.813634] ---[ end trace 5fb9e68c124792d7 ]---
[    4.821100] fbcon: inteldrmfb (fb0) is primary device
[    4.821383] Console: switching to colour frame buffer device 128x37
[    4.821448] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.830773] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:046D:C52F.0001/input/input8
[    4.832405] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[    4.840578] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:046D:C52F.0002/input/input9
[    4.848660] ------------[ cut here ]------------
[    4.848782] WARNING: CPU: 1 PID: 36 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/i915/intel_fbdev.c:416 intel_fb_initial_config+0x366/0x680 [i915]
[    4.848784] WARN_ON(!connector->state->crtc)
[    4.848786] Modules linked in:
[    4.848789]  hid_generic(+) usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[    4.848820] CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G        W       4.8.0-41-generic #44-Ubuntu
[    4.848823] Hardware name: Acer       Aspire one      /Aspire one      , BIOS V1.05 02/20/2009
[    4.848847] Workqueue: events output_poll_execute [drm_kms_helper]
[    4.848851]  dab58967 503fe760 00000286 f2cc1d30 da3db775 f2cc1d74 f8a79528 f2cc1d60
[    4.848862]  da0720ea f8a858a3 f2cc1d94 00000024 f8a79528 000001a0 f8a22236 000001a0
[    4.848872]  00000001 00000000 f5623c00 f2cc1d80 da072156 00000009 00000000 f2cc1d74
[    4.848882] Call Trace:
[    4.848893]  [<da3db775>] dump_stack+0x58/0x73
[    4.848900]  [<da0720ea>] __warn+0xea/0x110
[    4.849004]  [<f8a22236>] ? intel_fb_initial_config+0x366/0x680 [i915]
[    4.849009]  [<da072156>] warn_slowpath_fmt+0x46/0x60
[    4.849112]  [<f8a22236>] intel_fb_initial_config+0x366/0x680 [i915]
[    4.849216]  [<f8a21ed0>] ? intelfb_create+0x540/0x540 [i915]
[    4.849241]  [<f85d1623>] drm_setup_crtcs+0x1c3/0xa40 [drm_kms_helper]
[    4.849289]  [<f84fab6a>] ? drm_mode_connector_update_edid_property+0x4a/0x70 [drm]
[    4.849297]  [<da80a457>] ? __ww_mutex_lock+0x17/0xa0
[    4.849343]  [<f8509f99>] ? drm_modeset_lock+0x59/0xf0 [drm]
[    4.849389]  [<f850a0d4>] ? drm_modeset_lock_all_ctx+0xa4/0xb0 [drm]
[    4.849414]  [<f85d1fbd>] drm_fb_helper_hotplug_event+0x11d/0x160 [drm_kms_helper]
[    4.849518]  [<f8a22cf1>] intel_fbdev_output_poll_changed+0x21/0x30 [i915]
[    4.849540]  [<f85c3771>] drm_kms_helper_hotplug_event+0x21/0x30 [drm_kms_helper]
[    4.849562]  [<f85c3968>] output_poll_execute+0x188/0x1c0 [drm_kms_helper]
[    4.849569]  [<da08a978>] process_one_work+0x1b8/0x420
[    4.849574]  [<da08ac17>] worker_thread+0x37/0x4b0
[    4.849579]  [<da08abe0>] ? process_one_work+0x420/0x420
[    4.849583]  [<da090006>] kthread+0xa6/0xc0
[    4.849589]  [<da80c922>] ret_from_kernel_thread+0xe/0x24
[    4.849594]  [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[    4.849597] ---[ end trace 5fb9e68c124792d8 ]---
[    4.850069] ------------[ cut here ]------------
[    4.850099] WARNING: CPU: 1 PID: 36 at /build/linux-WVrMtq/linux-4.8.0/drivers/gpu/drm/drm_atomic_helper.c:785 drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[    4.850101] Modules linked in: hid_generic(+) usbhid hid i915 ahci psmouse i2c_algo_bit drm_kms_helper libahci syscopyarea pata_acpi sysfillrect atl1e sysimgblt fb_sys_fops drm fjes video wmi
[    4.850133] CPU: 1 PID: 36 Comm: kworker/1:1 Tainted: G        W       4.8.0-41-generic #44-Ubuntu
[    4.850135] Hardware name: Acer       Aspire one      /Aspire one      , BIOS V1.05 02/20/2009
[    4.850157] Workqueue: events output_poll_execute [drm_kms_helper]
[    4.850161]  dab58967 503fe760 00000286 f2cc1cb8 da3db775 00000000 f85d542c f2cc1ce8
[    4.850171]  da0720ea daa43fb4 00000001 00000024 f85d542c 00000311 f85ca9ba 00000311
[    4.850180]  f5623c00 00000000 f545f800 f2cc1cfc da0721fa 00000009 00000000 00000000
[    4.850190] Call Trace:
[    4.850199]  [<da3db775>] dump_stack+0x58/0x73
[    4.850205]  [<da0720ea>] __warn+0xea/0x110
[    4.850228]  [<f85ca9ba>] ? drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[    4.850233]  [<da0721fa>] warn_slowpath_null+0x2a/0x30
[    4.850256]  [<f85ca9ba>] drm_atomic_helper_update_legacy_modeset_state+0x22a/0x260 [drm_kms_helper]
[    4.850366]  [<f8a06115>] ? intel_pre_plane_update+0x55/0x160 [i915]
[    4.850469]  [<f8a0700d>] intel_atomic_commit_tail+0x93d/0xf50 [i915]
[    4.850493]  [<f85cb1a8>] ? drm_atomic_helper_swap_state+0x1b8/0x2d0 [drm_kms_helper]
[    4.850596]  [<f8a07a2e>] intel_atomic_commit+0x40e/0x510 [i915]
[    4.850647]  [<f850ac2b>] ? drm_atomic_check_only+0x19b/0x660 [drm]
[    4.850694]  [<f850b122>] drm_atomic_commit+0x32/0x60 [drm]
[    4.850719]  [<f85d0373>] restore_fbdev_mode+0x153/0x2a0 [drm_kms_helper]
[    4.850765]  [<f850a0d4>] ? drm_modeset_lock_all_ctx+0xa4/0xb0 [drm]
[    4.850789]  [<f85d2027>] drm_fb_helper_restore_fbdev_mode_unlocked+0x27/0x70 [drm_kms_helper]
[    4.850813]  [<f85d209d>] drm_fb_helper_set_par+0x2d/0x60 [drm_kms_helper]
[    4.850836]  [<f85d1fcc>] drm_fb_helper_hotplug_event+0x12c/0x160 [drm_kms_helper]
[    4.850941]  [<f8a22cf1>] intel_fbdev_output_poll_changed+0x21/0x30 [i915]
[    4.850963]  [<f85c3771>] drm_kms_helper_hotplug_event+0x21/0x30 [drm_kms_helper]
[    4.850984]  [<f85c3968>] output_poll_execute+0x188/0x1c0 [drm_kms_helper]
[    4.850991]  [<da08a978>] process_one_work+0x1b8/0x420
[    4.850996]  [<da08ac17>] worker_thread+0x37/0x4b0
[    4.851001]  [<da08abe0>] ? process_one_work+0x420/0x420
[    4.851005]  [<da090006>] kthread+0xa6/0xc0
[    4.851011]  [<da80c922>] ret_from_kernel_thread+0xe/0x24
[    4.851016]  [<da08ff60>] ? kthread_create_on_node+0x180/0x180
[    4.851020] ---[ end trace 5fb9e68c124792d9 ]---
[    4.902346] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[    5.032544] ata5: SATA link down (SStatus 0 SControl 300)
[    5.619548] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[    5.811554] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04773/0xa40000/0xa0000/0x0, board id: 0, fw id: 516037
[    5.933696] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    9.852999] random: crng init done
[   14.709323] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   15.962946] ip_tables: (C) 2000-2006 Netfilter Core Team
[   16.171881] systemd[1]: systemd 231 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[   16.172432] systemd[1]: Detected architecture x86.
[   16.190935] systemd[1]: Set hostname to <roula>.
[   17.811517] systemd[1]: Reached target Encrypted Volumes.
[   17.812090] systemd[1]: Listening on udev Control Socket.
[   17.812344] systemd[1]: Listening on Journal Socket.
[   17.812430] systemd[1]: Reached target User and Group Name Lookups.
[   17.812560] systemd[1]: Listening on udev Kernel Socket.
[   17.812688] systemd[1]: Listening on fsck to fsckd communication Socket.
[   17.812750] systemd[1]: Reached target Remote File Systems.
[   18.602703] lp: driver loaded but no devices found
[   18.640637] ppdev: user-space parallel port driver
[   22.196194] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   22.406367] systemd-journald[246]: Received request to flush runtime journal from PID 1
[   24.151708] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   24.589402] intel_rng: FWH not detected
[   24.718962] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20160422/utaddress-255)
[   24.718983] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.718989] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20160422/utaddress-255)
[   24.719003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.719006] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053B (\GPIO) (20160422/utaddress-255)
[   24.719020] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   24.719022] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   24.874979] leds_ss4200: no LED devices found
[   24.891649] audit: type=1400 audit(1489089077.952:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=411 comm="apparmor_parser"
[   24.891679] audit: type=1400 audit(1489089077.952:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=411 comm="apparmor_parser"
[   24.891705] audit: type=1400 audit(1489089077.952:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=411 comm="apparmor_parser"
[   24.891732] audit: type=1400 audit(1489089077.952:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=411 comm="apparmor_parser"
[   24.900262] audit: type=1400 audit(1489089077.964:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=410 comm="apparmor_parser"
[   24.900298] audit: type=1400 audit(1489089077.964:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=410 comm="apparmor_parser"
[   25.309081] intel_powerclamp: No package C-state available
[   25.367371] audit: type=1400 audit(1489089078.428:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=427 comm="apparmor_parser"
[   25.367408] audit: type=1400 audit(1489089078.428:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=427 comm="apparmor_parser"
[   25.423454] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   25.423464] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   25.423471] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   25.423476] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   25.423481] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   25.423488] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   25.423494] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   25.440468] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   25.441041] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   25.529809] media: Linux media interface: v0.10
[   25.613946] wl: loading out-of-tree module taints kernel.
[   25.613959] wl: module license 'MIXED/Proprietary' taints kernel.
[   25.613961] Disabling lock debugging due to kernel taint
[   25.647952] Linux video capture interface: v2.00
[   25.659147] wl: module verification failed: signature and/or required key missing - tainting kernel
[   25.900611] audit: type=1400 audit(1489089078.964:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=440 comm="apparmor_parser"
[   25.900643] audit: type=1400 audit(1489089078.964:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=440 comm="apparmor_parser"
[   25.911969] wlan0: Broadcom BCM4315 802.11 Hybrid Wireless Controller 6.30.223.248 (r487574)
[   26.149630] uvcvideo: Found UVC 1.00 device Webcam (04f2:b084)
[   26.153620] uvcvideo 1-2:1.0: Entity type for entity Extension 6 was not initialized!
[   26.153636] uvcvideo 1-2:1.0: Entity type for entity Processing 5 was not initialized!
[   26.153645] uvcvideo 1-2:1.0: Entity type for entity Selector 4 was not initialized!
[   26.153654] uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized!
[   26.154152] input: Webcam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input12
[   26.154497] usbcore: registered new interface driver uvcvideo
[   26.154501] USB Video Class driver (1.1.1)
[   29.441508] wl 0000:01:00.0 wls1: renamed from wlan0
[   29.696600] acer_wmi: Acer Laptop ACPI-WMI Extras
[   29.860267] acer_wmi: Function bitmap for Communication Device: 0x1
[   29.861771] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[   31.141572] Adding 2085884k swap on /dev/sda5.  Priority:-1 extents:1 across:2085884k FS
[   36.599581] PM: Syncing filesystems ... done.
[   37.490747] PM: Preparing system for sleep (mem)
[   37.491003] Freezing user space processes ... (elapsed 0.045 seconds) done.
[   37.536790] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[   37.536848] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   37.538196] PM: Suspending system (mem)
[   37.538292] Suspending console(s) (use no_console_suspend to debug)
[   37.538810] sd 2:0:0:0: [sda] Synchronizing SCSI cache
[   37.649909] sd 2:0:0:0: [sda] Stopping disk
[   38.215310] PM: suspend of devices complete after 676.719 msecs
[   38.232251] PM: late suspend of devices complete after 16.922 msecs
[   38.233314] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
[   38.233380] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
[   38.233453] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
[   38.233520] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
[   38.233589] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
[   38.252246] PM: noirq suspend of devices complete after 19.982 msecs
[   38.252296] ACPI: Preparing to enter system sleep state S3
[   38.252456] ACPI : EC: EC stopped
[   38.252457] PM: Saving platform NVS memory
[   38.253672] Disabling non-boot CPUs ...
[   38.255327] smpboot: CPU 1 is now offline
[   38.264539] ACPI: Low-level resume complete
[   38.264539] ACPI : EC: EC started
[   38.264539] PM: Restoring platform NVS memory
[   38.273034] Enabling non-boot CPUs ...
[   38.297037] x86: Booting SMP configuration:
[   38.297042] smpboot: Booting Node 0 Processor 1 APIC 0x1
[   38.255228] Initializing CPU#1
[   38.255228] Disabled fast string operations
[   38.297719]  cache: parent cpu1 should not be sleeping
[   38.298719] CPU1 is up
[   38.299522] ACPI: Waking up from system sleep state S3
[   38.303457] acpi LNXPOWER:00: Turning OFF
[   38.304382] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
[   38.304531] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
[   38.304676] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
[   38.304820] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
[   38.324344] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
[   38.324852] PM: noirq resume of devices complete after 21.310 msecs
[   38.325636] PM: early resume of devices complete after 0.714 msecs
[   38.329488] usb usb2: root hub lost power or was reset
[   38.329573] usb usb3: root hub lost power or was reset
[   38.329646] usb usb4: root hub lost power or was reset
[   38.329733] usb usb5: root hub lost power or was reset
[   38.330061] ata2: port disabled--ignoring
[   38.333592] sd 2:0:0:0: [sda] Starting disk
[   38.488429] rtc_cmos 00:01: System wakeup disabled by ACPI
[   38.584143] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[   38.647475] ata5: SATA link down (SStatus 0 SControl 300)
[   38.676204] usb 3-1: reset full-speed USB device number 2 using uhci_hcd
[   39.008247] PM: resume of devices complete after 682.593 msecs
[   39.008786] PM: Finishing wakeup.
[   39.008791] Restarting tasks ... done.
[   39.756297] video LNXVIDEO:00: Restoring backlight state
[   39.836206] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..5218]
[   40.388109] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   40.500270] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[   40.559902] ata3.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[   40.560483] ata3.00: configured for UDMA/133
[   42.804763] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[   42.839890] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   42.876528] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[  120.769934] ATL1E 0000:03:00.0 enp3s0: NIC Link is Up <100 Mbps Full Duplex>
[  120.770010] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
roula@roula:~$
Τελευταία επεξεργασία από the_eye και 09 Μαρ 2017, 23:24, έχει επεξεργασθεί 2 φορά/ες συνολικά
Αιτία: Το κώδικα τον βάζουμε μέσα σε <code> bbcode
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό lepidas » 09 Μαρ 2017, 23:06

Κάνε edit το παραπάνω post και βάλε αυτό το κατεβατο μέσα σε κώδικα tag , δηλαδή ανάμεσε σε (code) (/code) , άλλαξε τις παρενθέσεις με [ και ] αντίστοιχα, αλλιώς δε μπορεί να το διαβάσει άνθρωπος
Άβαταρ μέλους
lepidas
superbTUX
superbTUX
 
Δημοσιεύσεις: 3326
Εγγραφή: 11 Μάιος 2011, 11:10
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό metfm » 11 Μαρ 2017, 17:27

https://www.youtube.com/watch?v=ToZ8zX3 ... e=youtu.be

kai ενα βιντεο με το τι συμβαινει. στο τελος αφου πατησω το κουμπι μετα απο 8 φορες που αναβοσβηνει-σε 6 φορες πχ δεν γινεται- βγαινει η οθονη με κωδικους και δουλευουν ολα ρολοι. μετα στην λειτουργια αν μπει σε κατασταση αναμονης αφου το αφησω χωρις να κανω τιποτα παταω το κουμπι ενεργοποιησης και με τους κωδικους ξαναανοιγει. μονο στην εκινηση γινεται αυτο. γιωργο σε ευχαριστω για το καλωσορισμα
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό kwstas8es » 22 Μαρ 2017, 14:38

καλησπέρα,
συγνώμη, δεν περιμενα οτι θα υπηρχε παρομοιο προβλημα με το δικο μου και μαλιστα προσφατα!
εχω ανοιξει νεο τοπικ που περιγραφω σχεδον το ιδιο προβλημα, απλά ειμαι σε desktop και εμενα δε μ'αφηνει να προχωρησω περα απο την μαυρη αδρανοποιημενη οθονη...
metfm τελικά έλυσες το προβλημα?
kwstas8es
babeTUX
babeTUX
 
Δημοσιεύσεις: 36
Εγγραφή: 13 Ιούλ 2009, 15:52
Εκτύπωση

Re: Πρόβλημα στη εκίνηση με lubuntu 16.04

Δημοσίευσηαπό metfm » 22 Μαρ 2017, 16:45

οχι δεν μπορεσα να βρω λυση σε αυτο. πολυ περιεργη βλαβη και δεν ξερω τι θα μπορουσα να κανω. βεβαια σε εμενα οπως ειπα και πιο πανω μετα απο 8 φορες αφου αναβοσβησει το κουμπι ανοιγω κανονικα το νετμπουκ και απο εκει και μετα ολα δουλευουν ρολοι
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Desktops & Laptops