Προσαρτηση καρτας SD στο ubuntu  Το θέμα επιλύθηκε

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό georgebob » 15 Οκτ 2008, 01:05

Το λαπτοπ μου ´εχει ειδικη εσοχη για καρτες μνημης πχ sd, mmc, κλπ. στα windows οταν βαζω μια εμφανιζονται σαν μοναδες αποθηκευσης.
αντιθετα στο ubuntu δεν μπορω να τις βρω καπου δεν τις εμφανιζει.
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
Άβαταρ μέλους
georgebob
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 10 Οκτ 2008, 00:45
Τοποθεσία: Τρικαλα - Θεσσαλονικη
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό linuxman » 15 Οκτ 2008, 01:15

Λίγο παράξενο είναι , βάλε την κάρτα και άνοιξε το τερματικό και δώσε τα παρακάτω
Κώδικας: Επιλογή όλων

1. lpsci -nn
2. mount
3. dmesg

Και βάλε τα αποτελέσματα στο
Κώδικας: Επιλογή όλων
[code]εδώ[/code]
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό georgebob » 15 Οκτ 2008, 01:31

γραφω το lpsci -nn και μου βγαζει comand not found
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
Άβαταρ μέλους
georgebob
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 10 Οκτ 2008, 00:45
Τοποθεσία: Τρικαλα - Θεσσαλονικη
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό linuxman » 15 Οκτ 2008, 01:37

georgebob έγραψε:γραφω το lpsci -nn και μου βγαζει comand not found

Συγνώμη δικό μου λάθος
Κώδικας: Επιλογή όλων
lspci -nn
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό georgebob » 15 Οκτ 2008, 01:41

να βαλω ολα τα αποτελεσματα? παιζει να βγουνε κ 5 σελιδες
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
Άβαταρ μέλους
georgebob
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 10 Οκτ 2008, 00:45
Τοποθεσία: Τρικαλα - Θεσσαλονικη
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό linuxman » 15 Οκτ 2008, 01:47

georgebob έγραψε:να βαλω ολα τα αποτελεσματα? παιζει να βγουνε κ 5 σελιδες

Εάν τα βάλεις ανάμεσα στα
Κώδικας: Επιλογή όλων
εδώ
δεν θα βγούνε .
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό georgebob » 15 Οκτ 2008, 01:53

γραφω lspci -nn και βγαζει
Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port [8086:2591] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 04)
00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon Mobility X700 (PCIE) [1002:5653]
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 15)
06:02.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
06:03.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG Network Connection [8086:4220] (rev 05)
06:04.0 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
06:04.1 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
06:04.2 System peripheral [0880]: Texas Instruments PCI1620 Firmware Loading Function [104c:8201] (rev 01)

γραφω mount:
Κώδικας: Επιλογή όλων
/host/ubuntu/disks/root.disk on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-19-generic/volatile type tmpfs (rw)
/host/ubuntu/disks/boot on /boot type none (rw,bind)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
/dev/sdb1 on /media/BOB MARLEY type fuseblk (rw,nosuid,nodev,noatime,allow_other,blksize=4096)
gvfs-fuse-daemon on /home/georgebob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=georgebob)

τελος dmseg:
Κώδικας: Επιλογή όλων
[ 32.223014] .text : 0xc0100000 - 0xc03204c4 (2177 kB)
[ 32.223017] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.223051] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 32.302941] Calibrating delay using timer specific routine.. 3728.02 BogoMIPS (lpj=7456052)
[ 32.302964] Security Framework initialized
[ 32.302971] SELinux: Disabled at boot.
[ 32.302984] AppArmor: AppArmor initialized
[ 32.302988] Failure registering capabilities with primary security module.
[ 32.302995] Mount-cache hash table entries: 512
[ 32.303107] Initializing cgroup subsys ns
[ 32.303111] Initializing cgroup subsys cpuacct
[ 32.303121] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 32.303131] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 32.303133] CPU: L2 cache: 2048K
[ 32.303136] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 32.303145] Compat vDSO mapped to ffffe000.
[ 32.303155] Checking 'hlt' instruction... OK.
[ 32.319265] SMP alternatives: switching to UP code
[ 32.320964] Freeing SMP alternatives: 11k freed
[ 32.321060] Early unpacking initramfs... done
[ 32.672013] ACPI: Core revision 20070126
[ 32.672066] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 32.679089] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 32.679113] Total of 1 processors activated (3728.02 BogoMIPS).
[ 32.679300] ENABLING IO-APIC IRQs
[ 32.679488] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 32.826124] Brought up 1 CPUs
[ 32.826150] CPU0 attaching sched-domain:
[ 32.826152] domain 0: span 01
[ 32.826154] groups: 01
[ 32.826302] net_namespace: 64 bytes
[ 32.826310] Booting paravirtualized kernel on bare hardware
[ 32.826734] Time: 21:01:19 Date: 10/14/08
[ 32.826756] NET: Registered protocol family 16
[ 32.826924] EISA bus registered
[ 32.826950] ACPI: bus type pci registered
[ 32.827408] PCI: PCI BIOS revision 2.10 entry at 0xfd924, last bus=6
[ 32.827411] PCI: Using configuration type 1
[ 32.827420] Setting up standard PCI resources
[ 32.835800] ACPI: EC: Look up EC in DSDT
[ 32.836966] ACPI: Interpreter enabled
[ 32.836969] ACPI: (supports S0 S3 S4 S5)
[ 32.836981] ACPI: Using IOAPIC for interrupt routing
[ 32.837398] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 32.840507] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 32.840510] ACPI: EC: driver started in interrupt mode
[ 32.840545] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.841103] Force enabled HPET at base address 0xfed00000
[ 32.841111] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 32.841115] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 32.842043] PCI: Transparent bridge - 0000:00:1e.0
[ 32.842181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.842457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 32.842567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 32.842674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 32.844332] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 32.844409] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 32.844484] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 32.844560] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 32.844634] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 32.844709] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 32.844783] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 32.844859] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 32.844965] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.844992] pnp: PnP ACPI init
[ 32.844998] ACPI: bus type pnp registered
[ 32.846953] pnp: PnP ACPI: found 12 devices
[ 32.846956] ACPI: ACPI bus type pnp unregistered
[ 32.846959] PnPBIOS: Disabled by ACPI PNP
[ 32.847147] PCI: Using ACPI for IRQ routing
[ 32.847150] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.870051] NET: Registered protocol family 8
[ 32.870053] NET: Registered protocol family 20
[ 32.870197] hpet clockevent registered
[ 32.870203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 32.870207] hpet0: 3 64-bit timers, 14318180 Hz
[ 32.871238] AppArmor: AppArmor Filesystem Enabled
[ 32.874003] Time: tsc clocksource has been installed.
[ 32.882021] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 32.882024] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 32.882027] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 32.882030] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 32.882033] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 32.882035] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 32.882042] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 32.882044] system 00:06: ioport range 0x800-0x80f has been reserved
[ 32.882047] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 32.882050] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 32.882052] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 32.912368] PCI: Bridge: 0000:00:01.0
[ 32.912371] IO window: 2000-2fff
[ 32.912374] MEM window: c0100000-c01fffff
[ 32.912377] PREFETCH window: d0000000-d7ffffff
[ 32.912380] PCI: Bridge: 0000:00:1c.0
[ 32.912383] IO window: 3000-3fff
[ 32.912388] MEM window: c4000000-c7ffffff
[ 32.912392] PREFETCH window: d8000000-dbffffff
[ 32.912411] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 32.912412] IO window: 00004400-000044ff
[ 32.912418] IO window: 00004800-000048ff
[ 32.912424] PREFETCH window: 50000000-53ffffff
[ 32.912429] MEM window: 54000000-57ffffff
[ 32.912435] PCI: Bus 11, cardbus bridge: 0000:06:04.1
[ 32.912437] IO window: 00004c00-00004cff
[ 32.912442] IO window: 00001400-000014ff
[ 32.912447] PREFETCH window: 58000000-5bffffff
[ 32.912452] MEM window: 5c000000-5fffffff
[ 32.912458] PCI: Bridge: 0000:00:1e.0
[ 32.912460] IO window: 4000-4fff
[ 32.912465] MEM window: c8000000-c80fffff
[ 32.912469] PREFETCH window: disabled.
[ 32.912485] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.912490] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.912510] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.912516] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.912528] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 32.912545] PCI: Enabling device 0000:06:04.0 (0000 -> 0003)
[ 32.912549] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 32.912572] PCI: Enabling device 0000:06:04.1 (0000 -> 0003)
[ 32.912577] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 32.912586] PCI: Setting latency timer of device 0000:06:04.1 to 64
[ 32.912596] NET: Registered protocol family 2
[ 32.949930] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.950136] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.950880] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.951349] TCP: Hash tables configured (established 131072 bind 65536)
[ 32.951353] TCP reno registered
[ 32.962007] checking if image is initramfs... it is
[ 33.373167] Switched to high resolution mode on CPU 0
[ 33.639024] Freeing initrd memory: 7559k freed
[ 33.639283] Simple Boot Flag at 0x37 set to 0x1
[ 33.639661] audit: initializing netlink socket (disabled)
[ 33.639677] audit(1224018079.308:1): initialized
[ 33.639841] highmem bounce pool size: 64 pages
[ 33.641569] VFS: Disk quotas dquot_6.5.1
[ 33.641639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.641772] io scheduler noop registered
[ 33.641774] io scheduler anticipatory registered
[ 33.641776] io scheduler deadline registered
[ 33.641787] io scheduler cfq registered (default)
[ 33.641968] Boot video device is 0000:01:00.0
[ 33.642071] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 33.642099] assign_interrupt_mode Found MSI capability
[ 33.642125] Allocate Port Service[0000:00:01.0:pcie00]
[ 33.642194] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 33.642246] assign_interrupt_mode Found MSI capability
[ 33.642286] Allocate Port Service[0000:00:1c.0:pcie00]
[ 33.642324] Allocate Port Service[0000:00:1c.0:pcie02]
[ 33.642552] isapnp: Scanning for PnP cards...
[ 33.996701] isapnp: No Plug & Play device found
[ 34.020977] Real Time Clock Driver v1.12ac
[ 34.021185] hpet_resources: 0xfed00000 is busy
[ 34.021213] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.022327] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.022391] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 34.022478] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 34.024834] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 34.026086] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.026090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 34.026092] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 34.026094] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 34.026097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 34.028175] mice: PS/2 mouse device common for all mice
[ 34.028275] EISA: Probing bus 0 at eisa.0
[ 34.028282] Cannot allocate resource for EISA slot 1
[ 34.028285] Cannot allocate resource for EISA slot 2
[ 34.028287] Cannot allocate resource for EISA slot 3
[ 34.028289] Cannot allocate resource for EISA slot 4
[ 34.028306] EISA: Detected 0 cards.
[ 34.028309] cpuidle: using governor ladder
[ 34.028311] cpuidle: using governor menu
[ 34.028398] NET: Registered protocol family 1
[ 34.028422] Using IPI No-Shortcut mode
[ 34.028454] registered taskstats version 1
[ 34.028561] Magic number: 12:266:45
[ 34.028565] hash matches device ttyee
[ 34.028650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 34.028652] EDD information not available.
[ 34.028832] Freeing unused kernel memory: 368k freed
[ 34.055976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 35.211290] fuse init (API version 7.9)
[ 35.230714] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 35.230719] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 35.230731] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 35.232583] ACPI: Invalid passive threshold
[ 35.233440] ACPI: Thermal Zone [THM0] (45 C)
[ 35.821152] usbcore: registered new interface driver usbfs
[ 35.821175] usbcore: registered new interface driver hub
[ 35.832926] usbcore: registered new device driver usb
[ 35.842412] USB Universal Host Controller Interface driver v3.0
[ 35.842472] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 35.842482] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.842487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.842817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 35.842849] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 35.842973] usb usb1: configuration #1 chosen from 1 choice
[ 35.842997] hub 1-0:1.0: USB hub found
[ 35.843002] hub 1-0:1.0: 2 ports detected
[ 35.944822] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
[ 35.944835] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.944839] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.944861] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 35.944892] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 35.944998] usb usb2: configuration #1 chosen from 1 choice
[ 35.945019] hub 2-0:1.0: USB hub found
[ 35.945024] hub 2-0:1.0: 2 ports detected
[ 35.954764] SCSI subsystem initialized
[ 36.000740] libata version 3.00 loaded.
[ 36.048639] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
[ 36.048652] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 36.048656] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 36.048679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 36.048711] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 36.048810] usb usb3: configuration #1 chosen from 1 choice
[ 36.048831] hub 3-0:1.0: USB hub found
[ 36.048837] hub 3-0:1.0: 2 ports detected
[ 36.152541] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 36.152556] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 36.152560] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 36.152581] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 36.156480] ehci_hcd 0000:00:1d.7: debug port 1
[ 36.156486] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 36.156493] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc0004000
[ 36.172331] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.172447] usb usb4: configuration #1 chosen from 1 choice
[ 36.172469] hub 4-0:1.0: USB hub found
[ 36.172475] hub 4-0:1.0: 6 ports detected
[ 36.276323] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 36.329406] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8004000-c80047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 36.329599] ahci 0000:00:1f.2: version 3.0
[ 36.329624] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
[ 36.329645] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 36.691469] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 36.823783] usb 4-2: configuration #1 chosen from 1 choice
[ 36.863137] Clocksource tsc unstable (delta = -16495304733 ns)
[ 36.869811] Time: hpet clocksource has been installed.
[ 36.889261] usbcore: registered new interface driver libusual
[ 36.893286] Initializing USB Mass Storage driver...
[ 36.894037] scsi0 : SCSI emulation for USB Mass Storage devices
[ 36.894416] usbcore: registered new interface driver usb-storage
[ 36.894419] USB Mass Storage support registered.
[ 36.894473] usb-storage: device found at 2
[ 36.894475] usb-storage: waiting for device to settle before scanning
[ 36.903377] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
[ 36.903382] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
[ 36.903387] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 36.903605] scsi1 : ahci
[ 36.903771] scsi2 : ahci
[ 36.903884] scsi3 : ahci
[ 36.903996] scsi4 : ahci
[ 36.904073] ata1: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004500 irq 21
[ 36.904077] ata2: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004580 irq 21
[ 36.904080] ata3: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004600 irq 21
[ 36.904083] ata4: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004680 irq 21
[ 36.906629] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 36.911950] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000469c88]
[ 36.913631] usb 2-2: configuration #1 chosen from 1 choice
[ 36.929808] usbcore: registered new interface driver hiddev
[ 36.932642] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 36.932954] ata1: SATA link down (SStatus 0 SControl 300)
[ 36.933021] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2
[ 36.933033] usbcore: registered new interface driver usbhid
[ 36.933036] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.951708] ata2: SATA link down (SStatus 0 SControl 0)
[ 36.959073] ata3: SATA link down (SStatus 0 SControl 300)
[ 36.966380] ata4: SATA link down (SStatus 0 SControl 0)
[ 36.967067] ata_piix 0000:00:1f.1: version 2.12
[ 36.967085] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 22
[ 36.967118] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 36.967179] scsi5 : ata_piix
[ 36.967327] scsi6 : ata_piix
[ 36.967821] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 36.967824] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 36.976714] ata5.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100
[ 36.976717] ata5.00: 156301488 sectors, multi 16: LBA48
[ 36.976740] ata5.01: ATAPI: MATSHITAUJ-840D, 1.00, max UDMA/33
[ 36.977615] ata5.00: configured for UDMA/100
[ 36.982243] ata5.01: configured for UDMA/33
[ 36.982277] ata6: port disabled. ignoring.
[ 36.982394] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5
[ 36.983430] scsi 5:0:1:0: CD-ROM MATSHITA UJ-840D 1.00 PQ: 0 ANSI: 5
[ 36.999784] Driver 'sd' needs updating - please use bus_type methods
[ 36.999855] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.999866] sd 5:0:0:0: [sda] Write Protect is off
[ 36.999868] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.999882] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.999925] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.999933] sd 5:0:0:0: [sda] Write Protect is off
[ 36.999936] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.999950] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.999953] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 37.014872] sda1
[ 37.014923] sd 5:0:0:0: [sda] Attached SCSI disk
[ 37.019805] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 37.019821] sr 5:0:1:0: Attached scsi generic sg1 type 5
[ 37.025474] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 37.025478] Uniform CD-ROM driver Revision: 3.20
[ 37.025517] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 37.230986] loop: module loaded
[ 37.246664] kjournald starting. Commit interval 5 seconds
[ 37.246674] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.448066] usb-storage: device scan complete
[ 37.448373] scsi 0:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4
[ 37.449048] sd 0:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 37.449575] sd 0:0:0:0: [sdb] Write Protect is off
[ 37.449577] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 37.449580] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 37.450025] sd 0:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 37.450422] sd 0:0:0:0: [sdb] Write Protect is off
[ 37.450424] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 37.450426] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 37.450429] sdb: sdb1
[ 39.853279] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 39.853338] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 42.225395] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.282088] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.345166] Linux agpgart interface v0.102
[ 42.621655] iTCO_vendor_support: vendor-support=0
[ 42.660602] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 42.660713] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 42.660756] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 42.725458] input: Power Button (FF) as /devices/virtual/input/input3
[ 42.740445] ACPI: Power Button (FF) [PWRF]
[ 42.740512] input: Power Button (CM) as /devices/virtual/input/input4
[ 42.756414] ACPI: Power Button (CM) [PWRB]
[ 42.756492] input: Lid Switch as /devices/virtual/input/input5
[ 42.756678] ACPI: Lid Switch [LID0]
[ 42.756744] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 42.772390] ACPI: Sleep Button (CM) [SLPB]
[ 42.830181] ACPI: AC Adapter [ADP0] (on-line)
[ 42.892184] intel_rng: FWH not detected
[ 43.002673] ACPI: Battery Slot [BAT0] (battery present)
[ 43.464305] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 43.464320] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 43.464353] sky2 0000:02:00.0: v1.20 addr 0xc4000000 irq 16 Yukon-EC (0xb6) rev 1
[ 43.464761] sky2 eth0: addr 00:90:f5:46:9c:88
[ 43.718721] ieee80211_crypt: registered algorithm 'NULL'
[ 43.763751] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 43.763756] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 43.898624] Yenta: CardBus bridge found at 0000:06:04.0 [1558:04a0]
[ 43.898650] Yenta: Enabling burst memory read transactions
[ 43.898657] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 43.898659] Yenta: Routing CardBus interrupts to PCI
[ 43.898664] Yenta TI: socket 0000:06:04.0, mfunc 0x00000022, devctl 0x64
[ 43.904609] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 44.130782] Yenta: ISA IRQ mask 0x0000, PCI irq 18
[ 44.130788] Socket status: 30000086
[ 44.130791] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 44.130796] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 44.130799] cs: IO port probe 0x4000-0x4fff: clean.
[ 44.131024] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 44.137986] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 44.138022] [fglrx] ASYNCIO init succeed!
[ 44.138476] [fglrx] PAT is enabled successfully!
[ 44.139037] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 44.182137] Yenta: CardBus bridge found at 0000:06:04.1 [1558:04a0]
[ 44.182165] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 44.182167] Yenta: Routing CardBus interrupts to PCI
[ 44.182173] Yenta TI: socket 0000:06:04.1, mfunc 0x00000022, devctl 0x64
[ 44.215139] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 44.215143] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 44.337694] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 44.414284] Yenta: ISA IRQ mask 0x0000, PCI irq 19
[ 44.414289] Socket status: 30000006
[ 44.414292] Yenta: Raising subordinate bus# of parent bus (#06) from #0a to #0e
[ 44.414297] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 44.414300] cs: IO port probe 0x4000-0x4fff: clean.
[ 44.414525] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 44.481699] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 20 (level, low) -> IRQ 23
[ 44.529509] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 44.545235] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 44.573328] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 45.006057] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
[ 45.006084] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 45.037989] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[ 46.684459] irda_init()
[ 46.684477] NET: Registered protocol family 23
[ 46.781290] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input9
[ 46.804193] parport_pc 00:09: reported by Plug and Play ACPI
[ 46.804329] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 46.901289] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 46.901316] nsc-ircc, chip->init
[ 46.901329] nsc-ircc, Found chip at base=0x02e
[ 46.901333] nsc-ircc, Wrong chip version ff
[ 46.901372] nsc-ircc, Found chip at base=0x02e
[ 46.901377] nsc-ircc, Wrong chip version ff
[ 46.901390] nsc-ircc, chip->init
[ 46.901402] nsc-ircc, Found chip at base=0x02e
[ 46.901406] nsc-ircc, Wrong chip version ff
[ 46.901444] nsc-ircc, Found chip at base=0x02e
[ 46.901448] nsc-ircc, Wrong chip version ff
[ 46.901545] nsc-ircc 00:08: disabled
[ 48.001213] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 48.031270] cs: IO port probe 0x100-0x3af: clean.
[ 48.033092] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 48.033859] cs: IO port probe 0x820-0x8ff: clean.
[ 48.034484] cs: IO port probe 0xc00-0xcf7: clean.
[ 48.035264] cs: IO port probe 0xa00-0xaff: clean.
[ 48.036124] cs: IO port probe 0x100-0x3af: clean.
[ 48.037942] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 48.038711] cs: IO port probe 0x820-0x8ff: clean.
[ 48.039347] cs: IO port probe 0xc00-0xcf7: clean.
[ 48.040136] cs: IO port probe 0xa00-0xaff: clean.
[ 48.116603] lp0: using parport0 (interrupt-driven).
[ 48.219803] EXT3 FS on loop0, internal journal
[ 57.590619] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 57.846587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.104746] No dock devices found.
[ 58.755057] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 58.755062] apm: overridden by ACPI.
[ 58.932895] ppdev: user-space parallel port driver
[ 58.962304] audit(1224007335.125:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd" namespace="default"
[ 137.946964] Marking TSC unstable due to: cpufreq changes.
[ 139.323509] sky2 eth0: enabling interface
[ 60.127972] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 60.830789] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 63.084138] NET: Registered protocol family 17
[ 63.966841] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 63.966848] ata5.00: BMDMA stat 0x64
[ 63.966854] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 63.966856] res 51/84:01:3e:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 63.966859] ata5.00: status: { DRDY ERR }
[ 63.966861] ata5.00: error: { ICRC ABRT }
[ 63.966896] ata5: soft resetting link
[ 64.310652] ata5.00: configured for UDMA/100
[ 64.482116] ata5.01: configured for UDMA/33
[ 64.482124] ata5: EH complete
[ 64.718365] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 64.718369] ata5.00: BMDMA stat 0x64
[ 64.718374] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 64.718376] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 64.718379] ata5.00: status: { DRDY ERR }
[ 64.718381] ata5.00: error: { ICRC ABRT }
[ 64.718411] ata5: soft resetting link
[ 65.061179] ata5.00: configured for UDMA/100
[ 65.232784] ata5.01: configured for UDMA/33
[ 65.232792] ata5: EH complete
[ 65.469907] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 65.469910] ata5.00: BMDMA stat 0x64
[ 65.469916] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 65.469917] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 65.469920] ata5.00: status: { DRDY ERR }
[ 65.469922] ata5.00: error: { ICRC ABRT }
[ 65.469953] ata5: soft resetting link
[ 65.811813] ata5.00: configured for UDMA/100
[ 65.983445] ata5.01: configured for UDMA/33
[ 65.983451] ata5: EH complete
[ 66.221441] ata5.00: limiting speed to UDMA/66:PIO4
[ 66.221445] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 66.221447] ata5.00: BMDMA stat 0x64
[ 66.221452] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 66.221453] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 66.221456] ata5.00: status: { DRDY ERR }
[ 66.221458] ata5.00: error: { ICRC ABRT }
[ 66.221488] ata5: soft resetting link
[ 155.020794] ata5.00: configured for UDMA/66
[ 155.026723] ata5.01: configured for UDMA/33
[ 155.026736] ata5: EH complete
[ 155.028173] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 155.028544] sd 5:0:0:0: [sda] Write Protect is off
[ 155.028551] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 155.028595] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 155.028634] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 155.028655] sd 5:0:0:0: [sda] Write Protect is off
[ 155.028660] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 155.028692] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 155.105917] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 155.105929] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 155.105935] [fglrx] Reserve Block - 2 offset = 0Xffff000 length = 0X1000
[ 155.105941] [fglrx] Reserve Block - 3 offset = 0X7fbb000 length = 0X40000
[ 77.780111] [fglrx] interrupt source 20008000 successfully enabled
[ 77.780118] [fglrx] enable ID = 0x00000004
[ 77.780468] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 77.780674] [fglrx] interrupt source 10000000 successfully enabled
[ 77.780678] [fglrx] enable ID = 0x00000005
[ 77.780911] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 156.198027] NET: Registered protocol family 10
[ 156.198804] lo: Disabled Privacy Extensions
[ 156.200302] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 161.383993] eth0: no IPv6 routers present
[ 98.043968] totem[6398]: segfault at 00000005 eip b6f57de0 esp a6780e88 error 4
[ 186.025525] [fglrx] interrupt source 10000000 successfully disabled!
[ 186.025531] [fglrx] enable ID = 0x00000000
[ 186.025534] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000005
[ 186.025545] [fglrx] interrupt source 20008000 successfully disabled!
[ 186.025547] [fglrx] enable ID = 0x00000000
[ 186.025550] [fglrx] Receive disable interrupt message with irqEnableMask: 20008000; dwIRQEnableId: 00000004
[ 192.484618] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 192.502720] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 192.502725] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 192.502728] [fglrx] Reserve Block - 2 offset = 0Xffff000 length = 0X1000
[ 192.502730] [fglrx] Reserve Block - 3 offset = 0X7fbb000 length = 0X40000
[ 192.677322] [fglrx] interrupt source 20008000 successfully enabled
[ 192.677330] [fglrx] enable ID = 0x00000004
[ 192.677665] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 192.677864] [fglrx] interrupt source 10000000 successfully enabled
[ 192.677867] [fglrx] enable ID = 0x00000005
[ 192.678061] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000

καλη πατεντα το code !!
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
Άβαταρ μέλους
georgebob
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 10 Οκτ 2008, 00:45
Τοποθεσία: Τρικαλα - Θεσσαλονικη
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό linuxman » 15 Οκτ 2008, 02:07

Αυτό πρέπει να είναι
Κώδικας: Επιλογή όλων
/dev/sdb1 on /media/BOB MARLEY type fuseblk (rw,nosuid,nodev,noatime,allow_other,blksize=4096)

είναι 4GB , εάν ναι τότε το παραπάνω είναι , κανονικά θα πρέπει να την βλέπεις σαν ένα μικρό εικονίδιο στην επιφάνεια εργασίας
άνοιξε Η/Υ μου και μετά σύστημα αρχείον , φάκελο /media/ εδώ θα είναι BOB MARLEY , και που
δεν το εμφανίζει θα πρέπει να είναι ότι δεν έγινε ασφαλή κατάργηση από τα Παράθυρα , διαφορετικά θα έπρεπε να εμφανιστεί .
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό georgebob » 15 Οκτ 2008, 02:13

το συγγεκριμενο BOB MARLEY ειναι ο εξωτερικος δισκος. Θα τον κανω αποπροσαρτιση. Πιστευα κ εγω οτι πρεπει να εμφανισει την καρτα στην οθονη.Μηπως δεν ειναι εγκατεστημενη στο ubuntu η θυρα και δεν το διαβαζει καν?
η καρτα ειναι sd ειναι 512 mb κ μαρκα pny technologies
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
Άβαταρ μέλους
georgebob
babeTUX
babeTUX
 
Δημοσιεύσεις: 33
Εγγραφή: 10 Οκτ 2008, 00:45
Τοποθεσία: Τρικαλα - Θεσσαλονικη
Εκτύπωση

Re: Προσαρτηση καρτας SD στο ubuntu

Δημοσίευσηαπό linuxman » 15 Οκτ 2008, 02:24

georgebob έγραψε:το συγγεκριμενο BOB MARLEY ειναι ο εξωτερικος δισκος. Θα τον κανω αποπροσαρτιση. Πιστευα κ εγω οτι πρεπει να εμφανισει την καρτα στην οθονη.Μηπως δεν ειναι εγκατεστημενη στο ubuntu η θυρα και δεν το διαβαζει καν?
η καρτα ειναι sd ειναι 512 mb κ μαρκα pny technologies

Βάλε την κάρτα στο card reader και επανέλαβε τις εντολές την 2 και 3 .
Οδηγίες προς Νεοεισερχόμενους
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Ικανοποιητικό ┃ Αγγλικών: Ικανοποιητικό
2 Linux Mint 17.1 Rebecca 3.13.0-37-generic 64bit (el_GR.UTF-8, X-Cinnamon cinnamon)
3 Intel Core i5-2310M CPU @ 2.10GHz ‖ RAM 3866 MiB ‖ Dell Inc. 0D7C51 - Dell Inc. Dell System Vostro 3750
4 Intel 2nd Generation Core Processor Family Integrated Graphics [8086:0116] {i915}
5 wlan0: Intel Centrino Wireless-N 1030 [Rainbow Peak] [8086:008a] (rev 34) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
http://www.greeklug.gr
Άβαταρ μέλους
linuxman
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10378
Εγγραφή: 10 Μάιος 2008, 20:41
Τοποθεσία: Thessaloniki / Macedonia / Greece
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Περιφερειακά

cron