Για δες εδώ, να δούμε σε τι κατάσταση είναι.
viewtopic.php?f=9&t=19749
styl@HP-Compaq-Elite-8300-MT:~$ [b]sudo fdisk -l[/b]
............................................
Disk /dev/sdb: 465,7 GiB, 500074283008 bytes, 976707584 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00038a56
Device Boot Start End Sectors Size Id Type
/dev/sdb1 2048 976707583 976705536 465,7G 7 HPFS/NTFS/exFAT
styl@HP-Compaq-Elite-8300-MT:~$ [b]sudo fdisk -l | grep '^Disk'[/b]
...........................................
Disk /dev/sdb: 465,7 GiB, 500074283008 bytes, 976707584 sectors
Disklabel type: dos
Disk identifier: 0x00038a56
styl@HP-Compaq-Elite-8300-MT:~$ [b]sudo lshw -C disk[/b]
*-disk
description: SCSI Disk
product: My Passport 0740
κατασκευαστής: WD
physical id: 0.0.0
πληροφορίες διαύλου: scsi@6:0.0.0
λογικό όνομα: /dev/sdb
version: 1003
serial: WXP1A7153170
μέγεθος: 465GiB (500GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=6 logicalsectorsize=512 sectorsize=512 signature=00038a56
styl@HP-Compaq-Elite-8300-MT:~$ [b]sudo lsblk[/b]
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 465,7G 0 disk
└─sdb1 8:17 0 465,7G 0 part
styl@HP-Compaq-Elite-8300-MT:~$ [b][i][u]sudo smartctl -a /dev/sdb[/u][/i][/b]
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-41-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, http://www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Elements / My Passport (USB)
Device Model: WDC WD5000BMVW-11AMCS2
Serial Number: WD-WXP1A7153170
LU WWN Device Id: 5 0014ee 601e296c7
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Mar 27 23:49:11 2017 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (12180) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 121) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 603
3 Spin_Up_Time 0x0027 156 150 021 Pre-fail Always - 3191
4 Start_Stop_Count 0x0032 094 094 000 Old_age Always - 6162
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 089 089 000 Old_age Always - 8272
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2742
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 331
193 Load_Cycle_Count 0x0032 194 194 000 Old_age Always - 19995
194 Temperature_Celsius 0x0022 119 105 000 Old_age Always - 28
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 11
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
========================================================
styl@HP-Compaq-Elite-8300-MT:~$ [b][i][u]smartctl --test=long /dev/sdb[/u][/i][/b]
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-41-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, http://www.smartmontools.org
Smartctl open device: /dev/sdb [SAT] failed: Permission denied
1 Raw_Read_Error_Rate 0x002f 199 199 051 Pre-fail Always - 603