Κάρτα τηλεόρασης και ψηφιακά κανάλια  Το θέμα επιλύθηκε

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό ALdaperan » 12 Φεβ 2012, 14:12

Καλησπέρα,
Έχω την παρακάτω κάρτα τηλεόρασης για την οποία μετά από αρκετά θέματα κατάφερα (με τη βοήθεια του φόρουμ) να βλέπω αναλογικά κανάλια .
Pinnacle HYBRID Pro PCI

Το θέμα όμως τώρα είναι ότι τα αναλογικά κανάλια έπαψαν να αναμεταδίδονται στην Πάτρα και ήρθε η Digea
Από ότι ξέρω η κάρτα έχει ψηφιακό δέκτη (τουλάχιστον έτσι λέει στο site που αγόρασα την κάρτα) .. μπορούμε να την κάνουμε να πιάσει τα ψηφιακά κανάλια ;
  • Το tvtime πιάνει μόνο τα αναλογικά ( πιάνει ερτ3 και κάποια τοπικά κανάλια της Πάτρας που δεν έχουν ψηφιακό σήμα)
  • Το metv το δοκίμασα αλλά δεν έχει επιλογή για να ψάξω για κανάλια στην Πάτρα παρά μόνο στην Αθήνα
  • Το vlc δεν ξέρω πώς ακριβώς να το ρυθμίσω να ψάξει ψηφιακά κανάλια

Έχετε κάποια ιδέα πώς να δουλέψει ;
Παρακάτω παραθέτω αποτελέσματα εντολών που ίσως χρειαστείτε :


To lspci μου δίνει :

Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870]
02:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
05:02.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
05:03.0 FireWire (IEEE 1394): nee Agere Systems nee Lucent Microelectronics FW322/323 (rev 70)


Το dmesg :

Κώδικας: Επιλογή όλων
[    0.705126] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.705155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.705244] hub 8-0:1.0: USB hub found
[    0.705247] hub 8-0:1.0: 2 ports detected
[    0.705350] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.708148] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.708152] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.708250] mousedev: PS/2 mouse device common for all mice
[    0.708351] rtc_cmos 00:03: RTC can wake from S4
[    0.708394] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.708414] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.708476] device-mapper: uevent: version 1.0.3
[    0.708536] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.708579] device-mapper: multipath: version 1.2.0 loaded
[    0.708581] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.708636] EISA: Probing bus 0 at eisa.0
[    0.708638] EISA: Cannot allocate resource for mainboard
[    0.708640] Cannot allocate resource for EISA slot 1
[    0.708641] Cannot allocate resource for EISA slot 2
[    0.708643] Cannot allocate resource for EISA slot 3
[    0.708644] Cannot allocate resource for EISA slot 4
[    0.708645] Cannot allocate resource for EISA slot 5
[    0.708647] Cannot allocate resource for EISA slot 6
[    0.708648] Cannot allocate resource for EISA slot 7
[    0.708649] Cannot allocate resource for EISA slot 8
[    0.708651] EISA: Detected 0 cards.
[    0.708688] cpuidle: using governor ladder
[    0.708690] cpuidle: using governor menu
[    0.708906] TCP cubic registered
[    0.709006] NET: Registered protocol family 10
[    0.709449] NET: Registered protocol family 17
[    0.709460] Registering the dns_resolver key type
[    0.709488] Using IPI No-Shortcut mode
[    0.709552] PM: Hibernation image not present or could not be loaded.
[    0.709562] registered taskstats version 1
[    0.709813]   Magic number: 0:791:278
[    0.709825] tty tty15: hash matches
[    0.709870] rtc_cmos 00:03: setting system clock to 2012-02-11 12:17:03 UTC (1328962623)
[    0.709872] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.709873] EDD information not available.
[    0.990514] ata3: SATA link down (SStatus 0 SControl 300)
[    1.001174] ata4: SATA link down (SStatus 0 SControl 300)
[    1.124013] usb 2-6: new high speed USB device using ehci_hcd and address 4
[    1.244010] Refined TSC clocksource calibration: 2999.658 MHz.
[    1.244015] Switching to clocksource tsc
[    1.456054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.456064] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.456232] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.456242] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.456250] ata2.01: link offline, clearing class 3 to NONE
[    1.464117] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    1.464120] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.464223] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    1.480190] ata1.00: configured for UDMA/133
[    1.480196] ata2.00: configured for UDMA/100
[    1.480283] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[    1.480380] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.480390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.480419] sd 0:0:0:0: [sda] Write Protect is off
[    1.480421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.480440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.488752] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    1.494173]  sda: sda1 sda2 sda3
[    1.494446] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.497175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.497178] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.497276] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.497336] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.497438] Freeing unused kernel memory: 700k freed
[    1.497646] Write protecting the kernel text: 5192k
[    1.497678] Write protecting the kernel read-only data: 2152k
[    1.508009] usb 7-2: new low speed USB device using uhci_hcd and address 2
[    1.511568] <30>udev[72]: starting version 167
[    1.585347] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.585358] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.591252] ahci 0000:03:00.0: version 3.0
[    1.593228] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.593252] pata_marvell 0000:03:00.0: setting latency timer to 64
[    1.596139] scsi4 : pata_marvell
[    1.598525] scsi5 : pata_marvell
[    1.598563] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    1.598565] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    1.603008] usbcore: registered new interface driver uas
[    1.704614] usbcore: registered new interface driver usbhid
[    1.704616] usbhid: USB HID core driver
[    1.929869] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.931712] Initializing USB Mass Storage driver...
[    1.931947] scsi6 : usb-storage 2-6:1.2
[    1.932124] usbcore: registered new interface driver usb-storage
[    1.932126] USB Mass Storage support registered.
[    1.933861] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.936008] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    1.956233] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[    1.956305] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
[    1.984058] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    2.043986] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[    2.094143] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[    2.094227] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
[    2.155284] generic-usb 0003:0665:5161.0003: hiddev0,hidraw2: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.2-1/input0
[    2.484082] firewire_core: created device fw0: GUID 001e8c00015fd8da, S400
[    2.934760] scsi 6:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[    2.935176] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.941992] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   14.048921] <30>udev[319]: starting version 167
[   14.071465] Adding 2395132k swap on /dev/sda2.  Priority:-1 extents:1 across:2395132k
[   14.083659] lp: driver loaded but no devices found
[   14.212927] type=1400 audit(1328962637.000:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=572 comm="apparmor_parser"
[   14.213554] type=1400 audit(1328962637.000:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser"
[   14.213950] type=1400 audit(1328962637.000:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser"
[   14.319261] [drm] Initialized drm 1.1.0 20060810
[   14.343108] Linux video capture interface: v2.00
[   14.362998] IR NEC protocol handler initialized
[   14.367377] IR RC5(x) protocol handler initialized
[   14.373172] IR RC6 protocol handler initialized
[   14.381488] IR JVC protocol handler initialized
[   14.387735] [drm] radeon defaulting to kernel modesetting.
[   14.387736] [drm] radeon kernel modesetting enabled.
[   14.387781] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.387785] radeon 0000:01:00.0: setting latency timer to 64
[   14.388692] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[   14.388709] [drm] register mmio base: 0xFE8E0000
[   14.388711] [drm] register mmio size: 65536
[   14.388805] ATOM BIOS: Wekiva
[   14.388826] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   14.388828] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   14.390105] [drm] Detected VRAM RAM=512M, BAR=256M
[   14.390108] [drm] RAM width 256bits DDR
[   14.392605] IR Sony protocol handler initialized
[   14.392873] [TTM] Zone  kernel: Available graphics memory: 436254 kiB.
[   14.392875] [TTM] Zone highmem: Available graphics memory: 1029890 kiB.
[   14.392877] [TTM] Initializing pool allocator.
[   14.392889] [drm] radeon: 512M of VRAM memory ready
[   14.392890] [drm] radeon: 512M of GTT memory ready.
[   14.392902] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.392904] [drm] Driver supports precise vblank timestamp query.
[   14.392936] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   14.392941] radeon 0000:01:00.0: radeon: using MSI.
[   14.392964] [drm] radeon: irq initialized.
[   14.392966] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   14.393314] [drm] Loading RV770 Microcode
[   14.394194] saa7130/34: v4l2 driver version 0.2.16 loaded
[   14.394230] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.394235] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[   14.394240] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[   14.394251] saa7133[0]: board init: gpio is 600e000
[   14.397924] lirc_dev: IR Remote Control driver registered, major 249
[   14.398936] IR LIRC bridge handler initialized
[   14.404147] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[   14.404202] usbcore: registered new interface driver usblp
[   14.409827] radeon 0000:01:00.0: WB enabled
[   14.436278] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.436312] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   14.436331] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.455887] [drm] ring test succeeded in 1 usecs
[   14.456183] [drm] radeon: ib pool ready.
[   14.456241] [drm] ib test succeeded in 0 usecs
[   14.456243] [drm] Enabling audio support
[   14.456249] failed to evaluate ATIF got AE_BAD_PARAMETER
[   14.457508] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.457652] [drm] Radeon Display Connectors
[   14.457653] [drm] Connector 0:
[   14.457654] [drm]   DVI-I
[   14.457656] [drm]   HPD1
[   14.457657] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   14.457659] [drm]   Encoders:
[   14.457660] [drm]     DFP1: INTERNAL_UNIPHY
[   14.457661] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   14.457662] [drm] Connector 1:
[   14.457663] [drm]   DIN
[   14.457664] [drm]   Encoders:
[   14.457666] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   14.457667] [drm] Connector 2:
[   14.457668] [drm]   DVI-I
[   14.457669] [drm]   HPD2
[   14.457670] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   14.457672] [drm]   Encoders:
[   14.457673] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   14.457674] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[   14.544016] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   14.544024] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[   14.544031] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[   14.544038] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[   14.544045] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544059] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544066] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544073] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544080] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544087] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544094] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544101] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544108] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544115] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.544122] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.549568] [drm] Internal thermal controller with fan control
[   14.549624] [drm] radeon: power management initialized
[   14.553785] i2c-core: driver [tuner] using legacy suspend method
[   14.553787] i2c-core: driver [tuner] using legacy resume method
[   14.580064] tuner 5-004b: chip found @ 0x96 (saa7133[0])
[   14.633468] [drm] fb mappable at 0xD0142000
[   14.633470] [drm] vram apper at 0xD0000000
[   14.633471] [drm] size 7299072
[   14.633472] [drm] fb depth is 24
[   14.633473] [drm]    pitch is 6912
[   14.633530] fbcon: radeondrmfb (fb0) is primary device
[   14.633645] Console: switching to colour frame buffer device 210x65
[   14.633678] fb0: radeondrmfb frame buffer device
[   14.633679] drm: registered panic notifier
[   14.633684] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[   14.633716] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.633755] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   14.633774] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.649557] hda-intel: Enable sync_write for AMD chipset
[   14.660013] tda829x 5-004b: setting tuner address to 61
[   14.724004] tda829x 5-004b: type set to tda8290+75a
[   14.907130] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   18.476079] saa7133[0]: registered device video0 [v4l2]
[   18.476117] saa7133[0]: registered device vbi0
[   18.476154] saa7133[0]: registered device radio0
[   18.485387] saa7134 ALSA driver for DMA sound loaded
[   18.485410] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[   18.487064] dvb_init() allocating 1 frontend
[   18.720075] DVB: registering new adapter (saa7133[0])
[   18.720078] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   19.000017] tda1004x: setting up plls for 48MHz sampling clock
[   20.110867] ppdev: user-space parallel port driver
[   20.128836] type=1400 audit(1328962642.916:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=984 comm="apparmor_parser"
[   20.131301] type=1400 audit(1328962642.916:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=985 comm="apparmor_parser"
[   20.132369] type=1400 audit(1328962642.920:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=985 comm="apparmor_parser"
[   20.132768] type=1400 audit(1328962642.920:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=985 comm="apparmor_parser"
[   20.133194] type=1400 audit(1328962642.920:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=992 comm="apparmor_parser"
[   20.133924] type=1400 audit(1328962642.920:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=992 comm="apparmor_parser"
[   20.145722] type=1400 audit(1328962642.932:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=994 comm="apparmor_parser"
[   20.154194] type=1400 audit(1328962642.940:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=999 comm="apparmor_parser"
[   20.156785] type=1400 audit(1328962642.944:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=999 comm="apparmor_parser"
[   20.158317] type=1400 audit(1328962642.944:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=994 comm="apparmor_parser"
[   20.197894] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[   20.198010] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   21.244009] tda1004x: timeout waiting for DSP ready
[   21.284006] tda1004x: found firmware revision 0 -- invalid
[   21.284009] tda1004x: trying to boot from eeprom
[   21.872242] usb 2-6: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   23.612006] tda1004x: timeout waiting for DSP ready
[   23.652005] tda1004x: found firmware revision 0 -- invalid
[   23.652008] tda1004x: waiting for firmware upload...
[   23.654673] tda1004x: no firmware upload (timeout or file not found?)
[   23.654676] tda1004x: firmware upload failed
[   25.913074] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   27.460894] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   27.510938] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   30.512003] eth0: no IPv6 routers present
[ 6060.711149] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[11363.460207] ATL1E 0000:02:00.0: eth0: rx sequence number error (rx=20455) (expect=4857)
[11363.476185] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[67633.017133] show_signal_msg: 6 callbacks suppressed
[67633.017136] chrome[14158]: segfault at 6 ip b18d578e sp bfae84a0 error 4 in libgcflashplayer.so[b1108000+fc8000]
[76709.136007] tda1004x: setting up plls for 48MHz sampling clock
[76711.380012] tda1004x: timeout waiting for DSP ready
[76711.420020] tda1004x: found firmware revision 0 -- invalid
[76711.420023] tda1004x: trying to boot from eeprom
[76713.752016] tda1004x: timeout waiting for DSP ready
[76713.792012] tda1004x: found firmware revision 0 -- invalid
[76713.792014] tda1004x: waiting for firmware upload...
[76713.900918] tda1004x: no firmware upload (timeout or file not found?)
[76713.900920] tda1004x: firmware upload failed
[77344.044025] tda827xa_set_params: could not write to tuner at addr: 0xc2
[77520.836007] tda1004x: setting up plls for 48MHz sampling clock
[77523.080007] tda1004x: timeout waiting for DSP ready
[77523.120007] tda1004x: found firmware revision 0 -- invalid
[77523.120009] tda1004x: trying to boot from eeprom
[77525.452008] tda1004x: timeout waiting for DSP ready
[77525.492007] tda1004x: found firmware revision 0 -- invalid
[77525.492009] tda1004x: waiting for firmware upload...
[77525.494971] tda1004x: no firmware upload (timeout or file not found?)
[77525.494974] tda1004x: firmware upload failed
[77534.368005] tda1004x: setting up plls for 48MHz sampling clock
[77536.612006] tda1004x: timeout waiting for DSP ready
[77536.652007] tda1004x: found firmware revision 0 -- invalid
[77536.652009] tda1004x: trying to boot from eeprom
[77538.980006] tda1004x: timeout waiting for DSP ready
[77539.020007] tda1004x: found firmware revision 0 -- invalid
[77539.020010] tda1004x: waiting for firmware upload...
[77539.022810] tda1004x: no firmware upload (timeout or file not found?)
[77539.022812] tda1004x: firmware upload failed
[77547.588006] tda1004x: setting up plls for 48MHz sampling clock
[77549.832006] tda1004x: timeout waiting for DSP ready
[77549.872007] tda1004x: found firmware revision 0 -- invalid
[77549.872009] tda1004x: trying to boot from eeprom
[77552.200006] tda1004x: timeout waiting for DSP ready
[77552.240007] tda1004x: found firmware revision 0 -- invalid
[77552.240009] tda1004x: waiting for firmware upload...
[77552.243252] tda1004x: no firmware upload (timeout or file not found?)
[77552.243255] tda1004x: firmware upload failed
[77640.544008] tda1004x: setting up plls for 48MHz sampling clock
[77642.788007] tda1004x: timeout waiting for DSP ready
[77642.828006] tda1004x: found firmware revision 0 -- invalid
[77642.828008] tda1004x: trying to boot from eeprom
[77645.156006] tda1004x: timeout waiting for DSP ready
[77645.196006] tda1004x: found firmware revision 0 -- invalid
[77645.196008] tda1004x: waiting for firmware upload...
[77645.198868] tda1004x: no firmware upload (timeout or file not found?)
[77645.198870] tda1004x: firmware upload failed
[78508.976007] tda1004x: setting up plls for 48MHz sampling clock
[78511.220009] tda1004x: timeout waiting for DSP ready
[78511.260007] tda1004x: found firmware revision 0 -- invalid
[78511.260010] tda1004x: trying to boot from eeprom
[78513.588007] tda1004x: timeout waiting for DSP ready
[78513.628007] tda1004x: found firmware revision 0 -- invalid
[78513.628009] tda1004x: waiting for firmware upload...
[78513.632734] tda1004x: no firmware upload (timeout or file not found?)
[78513.632737] tda1004x: firmware upload failed
[78518.356005] tda1004x: setting up plls for 48MHz sampling clock
[78520.600006] tda1004x: timeout waiting for DSP ready
[78520.640006] tda1004x: found firmware revision 0 -- invalid
[78520.640008] tda1004x: trying to boot from eeprom
[78522.968007] tda1004x: timeout waiting for DSP ready
[78523.008012] tda1004x: found firmware revision 0 -- invalid
[78523.008015] tda1004x: waiting for firmware upload...
[78523.010923] tda1004x: no firmware upload (timeout or file not found?)
[78523.010926] tda1004x: firmware upload failed
[78605.717649] ISO 9660 Extensions: Microsoft Joliet Level 3
[78605.741783] ISOFS: changing to secondary root
[78795.011588] VFS: busy inodes on changed media or resized disk sr0
[79539.160005] tda1004x: setting up plls for 48MHz sampling clock
[79541.404007] tda1004x: timeout waiting for DSP ready
[79541.444007] tda1004x: found firmware revision 0 -- invalid
[79541.444009] tda1004x: trying to boot from eeprom
[79543.772007] tda1004x: timeout waiting for DSP ready
[79543.812007] tda1004x: found firmware revision 0 -- invalid
[79543.812010] tda1004x: waiting for firmware upload...
[79543.832077] tda1004x: no firmware upload (timeout or file not found?)
[79543.832079] tda1004x: firmware upload failed
[79548.972005] tda1004x: setting up plls for 48MHz sampling clock
[79551.216007] tda1004x: timeout waiting for DSP ready
[79551.256007] tda1004x: found firmware revision 0 -- invalid
[79551.256010] tda1004x: trying to boot from eeprom
[79553.584007] tda1004x: timeout waiting for DSP ready
[79553.624006] tda1004x: found firmware revision 0 -- invalid
[79553.624008] tda1004x: waiting for firmware upload...
[79553.626712] tda1004x: no firmware upload (timeout or file not found?)
[79553.626714] tda1004x: firmware upload failed
[79660.444007] tda1004x: setting up plls for 48MHz sampling clock
[79662.688006] tda1004x: timeout waiting for DSP ready
[79662.728019] tda1004x: found firmware revision 0 -- invalid
[79662.728022] tda1004x: trying to boot from eeprom
[79665.056008] tda1004x: timeout waiting for DSP ready
[79665.096005] tda1004x: found firmware revision 0 -- invalid
[79665.096008] tda1004x: waiting for firmware upload...
[79665.098829] tda1004x: no firmware upload (timeout or file not found?)
[79665.098831] tda1004x: firmware upload failed
[80562.644012] tda1004x: setting up plls for 48MHz sampling clock
[80564.888124] tda1004x: timeout waiting for DSP ready
[80564.928009] tda1004x: found firmware revision 0 -- invalid
[80564.928013] tda1004x: trying to boot from eeprom
[80567.256006] tda1004x: timeout waiting for DSP ready
[80567.296005] tda1004x: found firmware revision 0 -- invalid
[80567.296008] tda1004x: waiting for firmware upload...
[80567.298988] tda1004x: no firmware upload (timeout or file not found?)
[80567.298991] tda1004x: firmware upload failed
[80607.328007] tda1004x: setting up plls for 48MHz sampling clock
[80608.140014] tda1004x: found firmware revision 0 -- invalid
[80608.140017] tda1004x: trying to boot from eeprom
[80610.468006] tda1004x: timeout waiting for DSP ready
[80610.508006] tda1004x: found firmware revision 0 -- invalid
[80610.508009] tda1004x: waiting for firmware upload...
[80610.511243] tda1004x: no firmware upload (timeout or file not found?)
[80610.511245] tda1004x: firmware upload failed
[80823.152008] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80864.709100] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80875.076013] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80881.056009] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80891.480016] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80940.604007] tda827xa_set_params: could not write to tuner at addr: 0xc2
[81229.836008] tda1004x: setting up plls for 48MHz sampling clock
[81232.080007] tda1004x: timeout waiting for DSP ready
[81232.120009] tda1004x: found firmware revision 0 -- invalid
[81232.120012] tda1004x: trying to boot from eeprom
[81234.448008] tda1004x: timeout waiting for DSP ready
[81234.488008] tda1004x: found firmware revision 0 -- invalid
[81234.488011] tda1004x: waiting for firmware upload...
[81234.490884] tda1004x: no firmware upload (timeout or file not found?)
[81234.490886] tda1004x: firmware upload failed
[81234.552081] DVB: adapter 0 frontend 0 frequency 658000 out of range (51000000..858000000)
[81271.924009] tda1004x: setting up plls for 48MHz sampling clock
[81274.168006] tda1004x: timeout waiting for DSP ready
[81274.208008] tda1004x: found firmware revision 0 -- invalid
[81274.208011] tda1004x: trying to boot from eeprom
[81276.536008] tda1004x: timeout waiting for DSP ready
[81276.576008] tda1004x: found firmware revision 0 -- invalid
[81276.576011] tda1004x: waiting for firmware upload...
[81276.579332] tda1004x: no firmware upload (timeout or file not found?)
[81276.579334] tda1004x: firmware upload failed
[81276.640080] DVB: adapter 0 frontend 0 frequency 6580000 out of range (51000000..858000000)
[81289.320006] tda1004x: setting up plls for 48MHz sampling clock
[81291.564008] tda1004x: timeout waiting for DSP ready
[81291.604008] tda1004x: found firmware revision 0 -- invalid
[81291.604011] tda1004x: trying to boot from eeprom
[81293.932005] tda1004x: timeout waiting for DSP ready
[81293.972007] tda1004x: found firmware revision 0 -- invalid
[81293.972011] tda1004x: waiting for firmware upload...
[81293.974930] tda1004x: no firmware upload (timeout or file not found?)
[81293.974933] tda1004x: firmware upload failed
[81324.037733] DVB: adapter 0 frontend 0 frequency 658000 out of range (51000000..858000000)
[81331.796008] tda1004x: setting up plls for 48MHz sampling clock
[81334.040010] tda1004x: timeout waiting for DSP ready
[81334.080008] tda1004x: found firmware revision 0 -- invalid
[81334.080011] tda1004x: trying to boot from eeprom
[81336.408007] tda1004x: timeout waiting for DSP ready
[81336.448007] tda1004x: found firmware revision 0 -- invalid
[81336.448010] tda1004x: waiting for firmware upload...
[81336.451166] tda1004x: no firmware upload (timeout or file not found?)
[81336.451169] tda1004x: firmware upload failed
[81383.776082] DVB: adapter 0 frontend 0 frequency 44000 out of range (51000000..858000000)
[81626.116008] tda1004x: setting up plls for 48MHz sampling clock
[81628.360045] tda1004x: timeout waiting for DSP ready
[81628.400006] tda1004x: found firmware revision 0 -- invalid
[81628.400008] tda1004x: trying to boot from eeprom
[81630.728007] tda1004x: timeout waiting for DSP ready
[81630.768006] tda1004x: found firmware revision 0 -- invalid
[81630.768008] tda1004x: waiting for firmware upload...
[81630.772778] tda1004x: no firmware upload (timeout or file not found?)
[81630.772781] tda1004x: firmware upload failed
[81644.340005] tda1004x: setting up plls for 48MHz sampling clock
[81646.584006] tda1004x: timeout waiting for DSP ready
[81646.624005] tda1004x: found firmware revision 0 -- invalid
[81646.624007] tda1004x: trying to boot from eeprom
[81648.952008] tda1004x: timeout waiting for DSP ready
[81648.992008] tda1004x: found firmware revision 0 -- invalid
[81648.992010] tda1004x: waiting for firmware upload...
[81648.994850] tda1004x: no firmware upload (timeout or file not found?)
[81648.994853] tda1004x: firmware upload failed
[81823.458363] zapping[31797]: segfault at 2020024 ip 016d1a41 sp bfc3ace8 error 6 in libc-2.13.so[15be000+15a000]


Ευχαριστώ εκ των προτέρων :wave:
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό simosx » 12 Φεβ 2012, 14:50

Από τα παρακάτω βλέπουμε ότι έχει ανιχνευτεί η συσκευή μια χαρά και ότι η απλή λειτουργία (αναλογική) φαίνεται να είναι εντάξει (και αναφέρεις ότι είναι εντάξει).

Ωστόσο, σε προχωρημένο στάδιο αρχικοποίησης αναφέρει ζητήματα για firmware, που μπορεί να σχετίζεται με τη λειτουργία σε ψηφιακά κανάλια.

ALdaperan έγραψε:[ 14.394194] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 14.394230] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.394235] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[ 14.394240] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[ 14.394251] saa7133[0]: board init: gpio is 600e000


Αναγνωρίστηκε ως συμβατή με Pinnacle PCTV 310i. Μια χαρά.

ALdaperan έγραψε:[ 14.544016] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 14.544024] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[ 14.544031] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[ 14.544038] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[ 14.544045] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544059] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544066] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544073] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544080] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544087] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544094] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544101] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544108] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544115] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544122] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff


Κάποιες πληροφορίες από την EEPROM της κάρτας, όλα φαίνονται μια χαρά.

ALdaperan έγραψε:[ 14.553785] i2c-core: driver [tuner] using legacy suspend method
[ 14.553787] i2c-core: driver [tuner] using legacy resume method
[ 14.580064] tuner 5-004b: chip found @ 0x96 (saa7133[0])


Αναφέρει για legacy σε suspend και resume. Δεν είναι πρόβλημα.

ALdaperan έγραψε:[ 14.660013] tda829x 5-004b: setting tuner address to 61
[ 14.724004] tda829x 5-004b: type set to tda8290+75a


Ακόμα πάει καλά.

ALdaperan έγραψε:[ 18.476079] saa7133[0]: registered device video0 [v4l2]
[ 18.476117] saa7133[0]: registered device vbi0
[ 18.476154] saa7133[0]: registered device radio0
[ 18.485387] saa7134 ALSA driver for DMA sound loaded
[ 18.485410] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[ 18.487064] dvb_init() allocating 1 frontend
[ 18.720075] DVB: registering new adapter (saa7133[0])
[ 18.720078] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 19.000017] tda1004x: setting up plls for 48MHz sampling clock


Βρήκε ακόμα και ράδιο. Βρήκε Philips TDA10046H DVB-T, οπότε ξεκινά η αρχικοποίηση του DVB-T.

ALdaperan έγραψε:[ 21.244009] tda1004x: timeout waiting for DSP ready
[ 21.284006] tda1004x: found firmware revision 0 -- invalid
[ 21.284009] tda1004x: trying to boot from eeprom


Κάποιο πρόβλημα στο firmware, λέει invalid. Και το ίδιο σφάλμα επαναλαμβάνεται.
Εδώ μάλλον θα χρειαστεί να βρεις νέο ενημερωμένο firmware, ώστε να μην παρουσιάζει το ίδιο σφάλμα.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό ALdaperan » 12 Φεβ 2012, 14:57

simosx έγραψε:Κάποιο πρόβλημα στο firmware, λέει invalid. Και το ίδιο σφάλμα επαναλαμβάνεται.
Εδώ μάλλον θα χρειαστεί να βρεις νέο ενημερωμένο firmware, ώστε να μην παρουσιάζει το ίδιο σφάλμα.

To οποίο από που πρέπει να το αναζητήσω και με τι στοιχεία ;

Ευχαριστώ για την απάντηση!!

Edit : Νομίζω κάτι βρήκα χωρίς να είμαι σίγουρος ότι είναι αυτό
Σε αυτή τη σελίδα http://linuxtv.org/wiki/index.php/Pinna ... %28310i%29
αναφέρει πρός το τέλος
Firmware
if you get:
Κώδικας: Επιλογή όλων
  DVB: registering frontend 0 (Philips TDA10045H DVB-T)...
  tda1004x: waiting for firmware upload (dvb-fe-tda10045.fw)...
  tda1004x: no firmware upload (timeout or file not found?)
  tda1004x: firmware upload failed
you must run the get_dvb_firmware script in v4l-dvb/linux/Documentation/dvb (from mercurial)
Κώδικας: Επιλογή όλων
  get_dvb_firmware tda10045
  get_dvb_firmware tda10046
and copy the resulting files to /lib/firmware (need to use the chmod)

αλλά δεν πολυκαταλαβαίνω πώς ακριβώς θα γίνει αυτό..το script από που θα το κατεβάσω.. :problem:

Edit 2 : Βρήκα πιο αναλυτικά αυτά που λέει το παραπάνω link στη γαλλική κοινότητα : http://doc.ubuntu-fr.org/pctv_310i
Τα κάνω αυτή τη στιγμή .. ελπίζω να έχουν κάποια σχέση :D
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό ALdaperan » 12 Φεβ 2012, 16:07

Λοιπόν έκανα τα παραπάνω και έχω τώρα αυτό το dmesg

Κώδικας: Επιλογή όλων
[    0.235818] pci 0000:00:1c.0: setting latency timer to 64
[    0.235823] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.235826] pci 0000:00:1c.4: setting latency timer to 64
[    0.235831] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.235834] pci 0000:00:1c.5: setting latency timer to 64
[    0.235839] pci 0000:00:1e.0: setting latency timer to 64
[    0.235842] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.235844] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.235846] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235848] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235849] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.235851] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.235853] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.235855] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.235857] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.235859] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[    0.235861] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.235862] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.235864] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.235866] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.235868] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.235870] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.235872] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.235874] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.235876] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.235877] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.235879] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235881] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235883] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[    0.235913] NET: Registered protocol family 2
[    0.235973] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.236160] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.236501] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.236677] TCP: Hash tables configured (established 131072 bind 65536)
[    0.236679] TCP reno registered
[    0.236681] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.236688] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.236749] NET: Registered protocol family 1
[    0.236876] pci 0000:01:00.0: Boot video device
[    0.236887] PCI: CLS 32 bytes, default 64
[    0.237037] cpufreq-nforce2: No nForce2 chipset.
[    0.237136] audit: initializing netlink socket (disabled)
[    0.237142] type=2000 audit(1329051775.232:1): initialized
[    0.243814] highmem bounce pool size: 64 pages
[    0.243818] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.245189] VFS: Disk quotas dquot_6.5.2
[    0.245234] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.245745] fuse init (API version 7.16)
[    0.245813] msgmni has been set to 1678
[    0.245992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.246013] io scheduler noop registered
[    0.246014] io scheduler deadline registered
[    0.246025] io scheduler cfq registered (default)
[    0.246119] pcieport 0000:00:01.0: setting latency timer to 64
[    0.246143] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.246180] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.246210] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.246256] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.246287] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.246336] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.246365] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.246430] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.246447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.246502] intel_idle: MWAIT substates: 0x22220
[    0.246503] intel_idle: does not run on family 6 model 23
[    0.246580] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.246584] ACPI: Power Button [PWRB]
[    0.246620] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.246623] ACPI: Power Button [PWRF]
[    0.246768] ACPI: acpi_idle registered with cpuidle
[    0.247994] ERST: Table is not found!
[    0.248060] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.252053] isapnp: Scanning for PnP cards...
[    0.268378] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.369536] Freeing initrd memory: 12552k freed
[    0.604842] isapnp: No Plug & Play device found
[    0.629595] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.629865] Linux agpgart interface v0.103
[    0.630978] brd: module loaded
[    0.631439] loop: module loaded
[    0.631506] i2c-core: driver [adp5520] using legacy suspend method
[    0.631507] i2c-core: driver [adp5520] using legacy resume method
[    0.631591] ata_piix 0000:00:1f.2: version 2.13
[    0.631612] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.631616] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.631652] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.631914] scsi0 : ata_piix
[    0.631983] scsi1 : ata_piix
[    0.633065] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.633069] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.633084] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.633088] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.633124] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.633295] scsi2 : ata_piix
[    0.633350] scsi3 : ata_piix
[    0.634199] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.634202] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.634251] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.634273] pata_acpi 0000:03:00.0: setting latency timer to 64
[    0.634283] pata_acpi 0000:03:00.0: PCI INT A disabled
[    0.634542] Fixed MDIO Bus: probed
[    0.634573] PPP generic driver version 2.4.2
[    0.634604] tun: Universal TUN/TAP device driver, 1.6
[    0.634605] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.634667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.634684] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.634691] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.634694] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.634722] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.634757] ehci_hcd 0000:00:1a.7: debug port 1
[    0.638640] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.638651] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.652013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.652140] hub 1-0:1.0: USB hub found
[    0.652145] hub 1-0:1.0: 6 ports detected
[    0.652227] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.652235] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.652237] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.652265] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.656042] ehci_hcd 0000:00:1d.7: debug port 1
[    0.659910] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.659921] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.672012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.672140] hub 2-0:1.0: USB hub found
[    0.672144] hub 2-0:1.0: 6 ports detected
[    0.672226] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.672236] uhci_hcd: USB Universal Host Controller Interface driver
[    0.672252] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.672256] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.672259] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.672287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.676045] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.676173] hub 3-0:1.0: USB hub found
[    0.676177] hub 3-0:1.0: 2 ports detected
[    0.676239] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.676244] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.676246] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.676274] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.676309] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.676403] hub 4-0:1.0: USB hub found
[    0.676406] hub 4-0:1.0: 2 ports detected
[    0.676458] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.676463] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.676465] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.676491] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.676520] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.676607] hub 5-0:1.0: USB hub found
[    0.676610] hub 5-0:1.0: 2 ports detected
[    0.676661] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.676666] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.676668] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.676694] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.676723] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.676814] hub 6-0:1.0: USB hub found
[    0.676817] hub 6-0:1.0: 2 ports detected
[    0.676870] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.676874] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.676877] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.676904] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.676934] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.677024] hub 7-0:1.0: USB hub found
[    0.677027] hub 7-0:1.0: 2 ports detected
[    0.677080] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.677085] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.677088] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.677115] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.677143] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.677233] hub 8-0:1.0: USB hub found
[    0.677235] hub 8-0:1.0: 2 ports detected
[    0.677339] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.680119] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.680124] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.680221] mousedev: PS/2 mouse device common for all mice
[    0.680323] rtc_cmos 00:03: RTC can wake from S4
[    0.680364] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.680387] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.680449] device-mapper: uevent: version 1.0.3
[    0.680507] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.680548] device-mapper: multipath: version 1.2.0 loaded
[    0.680550] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.680606] EISA: Probing bus 0 at eisa.0
[    0.680608] EISA: Cannot allocate resource for mainboard
[    0.680610] Cannot allocate resource for EISA slot 1
[    0.680611] Cannot allocate resource for EISA slot 2
[    0.680612] Cannot allocate resource for EISA slot 3
[    0.680614] Cannot allocate resource for EISA slot 4
[    0.680615] Cannot allocate resource for EISA slot 5
[    0.680617] Cannot allocate resource for EISA slot 6
[    0.680618] Cannot allocate resource for EISA slot 7
[    0.680619] Cannot allocate resource for EISA slot 8
[    0.680621] EISA: Detected 0 cards.
[    0.680658] cpuidle: using governor ladder
[    0.680659] cpuidle: using governor menu
[    0.680875] TCP cubic registered
[    0.680977] NET: Registered protocol family 10
[    0.681418] NET: Registered protocol family 17
[    0.681430] Registering the dns_resolver key type
[    0.681459] Using IPI No-Shortcut mode
[    0.681526] PM: Hibernation image not present or could not be loaded.
[    0.681536] registered taskstats version 1
[    0.681788]   Magic number: 0:216:28
[    0.681845] rtc_cmos 00:03: setting system clock to 2012-02-12 13:02:56 UTC (1329051776)
[    0.681847] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.681849] EDD information not available.
[    0.962524] ata4: SATA link down (SStatus 0 SControl 300)
[    0.973042] ata3: SATA link down (SStatus 0 SControl 300)
[    1.096013] usb 2-6: new high speed USB device using ehci_hcd and address 4
[    1.236059] Refined TSC clocksource calibration: 2999.658 MHz.
[    1.236064] Switching to clocksource tsc
[    1.428052] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.428064] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.428074] ata2.01: link offline, clearing class 3 to NONE
[    1.436115] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    1.440052] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.440062] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.448112] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    1.448115] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.452110] ata2.00: configured for UDMA/100
[    1.464113] ata1.00: configured for UDMA/133
[    1.464219] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[    1.464318] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.464330] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.464357] sd 0:0:0:0: [sda] Write Protect is off
[    1.464359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.464378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.467769] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    1.476213] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.476216] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.476320] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.476380] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.477985]  sda: sda1 sda2 sda3
[    1.478281] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.478306] Freeing unused kernel memory: 700k freed
[    1.478524] Write protecting the kernel text: 5192k
[    1.478557] Write protecting the kernel read-only data: 2152k
[    1.480008] usb 7-2: new low speed USB device using uhci_hcd and address 2
[    1.492498] <30>udev[72]: starting version 167
[    1.558458] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.558469] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.572372] ahci 0000:03:00.0: version 3.0
[    1.573373] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.573399] pata_marvell 0000:03:00.0: setting latency timer to 64
[    1.573810] scsi4 : pata_marvell
[    1.573870] scsi5 : pata_marvell
[    1.573905] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    1.573907] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    1.586718] usbcore: registered new interface driver uas
[    1.590747] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.644054] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.691330] usbcore: registered new interface driver usbhid
[    1.691332] usbhid: USB HID core driver
[    1.834119] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.908013] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    1.919918] Initializing USB Mass Storage driver...
[    1.920010] scsi6 : usb-storage 2-6:1.2
[    1.920084] usbcore: registered new interface driver usb-storage
[    1.920086] USB Mass Storage support registered.
[    2.127277] generic-usb 0003:0665:5161.0003: hiddev0,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.2-1/input0
[    2.144077] firewire_core: created device fw0: GUID 001e8c00015fd8da, S400
[    2.922880] scsi 6:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[    2.923344] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.929984] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   13.797650] <30>udev[324]: starting version 167
[   13.821965] Adding 2395132k swap on /dev/sda2.  Priority:-1 extents:1 across:2395132k
[   13.846326] lp: driver loaded but no devices found
[   13.882997] [drm] Initialized drm 1.1.0 20060810
[   14.071227] Linux video capture interface: v2.00
[   14.077666] type=1400 audit(1329051789.891:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=601 comm="apparmor_parser"
[   14.078291] type=1400 audit(1329051789.891:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=601 comm="apparmor_parser"
[   14.078691] type=1400 audit(1329051789.891:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=601 comm="apparmor_parser"
[   14.079903] type=1400 audit(1329051789.891:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=632 comm="apparmor_parser"
[   14.080534] type=1400 audit(1329051789.895:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=632 comm="apparmor_parser"
[   14.080931] type=1400 audit(1329051789.895:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=632 comm="apparmor_parser"
[   14.104174] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[   14.104298] microsoft 0003:045E:00F9.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
[   14.112793] IR NEC protocol handler initialized
[   14.120722] IR RC5(x) protocol handler initialized
[   14.129596] saa7130/34: v4l2 driver version 0.2.16 loaded
[   14.129631] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.129636] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[   14.129641] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[   14.129654] saa7133[0]: board init: gpio is 600c000
[   14.131242] IR RC6 protocol handler initialized
[   14.132588] [drm] radeon defaulting to kernel modesetting.
[   14.132590] [drm] radeon kernel modesetting enabled.
[   14.132624] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.132627] radeon 0000:01:00.0: setting latency timer to 64
[   14.132740] IR JVC protocol handler initialized
[   14.133869] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[   14.133885] [drm] register mmio base: 0xFE8E0000
[   14.133886] [drm] register mmio size: 65536
[   14.133979] ATOM BIOS: Wekiva
[   14.133998] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   14.134001] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   14.137743] IR Sony protocol handler initialized
[   14.140016] [drm] Detected VRAM RAM=512M, BAR=256M
[   14.140018] [drm] RAM width 256bits DDR
[   14.141018] [TTM] Zone  kernel: Available graphics memory: 436254 kiB.
[   14.141019] [TTM] Zone highmem: Available graphics memory: 1029890 kiB.
[   14.141021] [TTM] Initializing pool allocator.
[   14.141035] [drm] radeon: 512M of VRAM memory ready
[   14.141037] [drm] radeon: 512M of GTT memory ready.
[   14.141049] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.141050] [drm] Driver supports precise vblank timestamp query.
[   14.141083] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[   14.141087] radeon 0000:01:00.0: radeon: using MSI.
[   14.141109] [drm] radeon: irq initialized.
[   14.141111] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   14.143159] [drm] Loading RV770 Microcode
[   14.144107] lirc_dev: IR Remote Control driver registered, major 249
[   14.145553] IR LIRC bridge handler initialized
[   14.154258] radeon 0000:01:00.0: WB enabled
[   14.154613] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[   14.154646] usbcore: registered new interface driver usblp
[   14.180392] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.180428] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[   14.180447] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.191978] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[   14.208850] [drm] ring test succeeded in 1 usecs
[   14.208951] [drm] radeon: ib pool ready.
[   14.209006] [drm] ib test succeeded in 0 usecs
[   14.209008] [drm] Enabling audio support
[   14.209013] failed to evaluate ATIF got AE_BAD_PARAMETER
[   14.210304] [drm] Radeon Display Connectors
[   14.210306] [drm] Connector 0:
[   14.210307] [drm]   DVI-I
[   14.210308] [drm]   HPD1
[   14.210310] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   14.210311] [drm]   Encoders:
[   14.210312] [drm]     DFP1: INTERNAL_UNIPHY
[   14.210314] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   14.210315] [drm] Connector 1:
[   14.210316] [drm]   DIN
[   14.210317] [drm]   Encoders:
[   14.210318] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   14.210319] [drm] Connector 2:
[   14.210320] [drm]   DVI-I
[   14.210321] [drm]   HPD2
[   14.210323] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   14.210324] [drm]   Encoders:
[   14.210325] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   14.210326] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[   14.273220] [drm] Internal thermal controller with fan control
[   14.273306] [drm] radeon: power management initialized
[   14.275255] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[   14.275915] microsoft 0003:045E:00F9.0002: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
[   14.280126] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   14.280134] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[   14.280141] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[   14.280148] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[   14.280155] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280162] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280169] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280176] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280183] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280190] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280197] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280204] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280211] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280218] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280225] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.280232] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.291176] i2c-core: driver [tuner] using legacy suspend method
[   14.291178] i2c-core: driver [tuner] using legacy resume method
[   14.316179] tuner 5-004b: chip found @ 0x96 (saa7133[0])
[   14.367622] [drm] fb mappable at 0xD0142000
[   14.367624] [drm] vram apper at 0xD0000000
[   14.367625] [drm] size 7299072
[   14.367626] [drm] fb depth is 24
[   14.367627] [drm]    pitch is 6912
[   14.367719] fbcon: radeondrmfb (fb0) is primary device
[   14.367863] Console: switching to colour frame buffer device 210x65
[   14.367896] fb0: radeondrmfb frame buffer device
[   14.367897] drm: registered panic notifier
[   14.367903] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[   14.367971] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.368076] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   14.368097] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.384045] hda-intel: Enable sync_write for AMD chipset
[   14.396013] tda829x 5-004b: setting tuner address to 61
[   14.442568] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.460005] tda829x 5-004b: type set to tda8290+75a
[   14.724196] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   18.212082] saa7133[0]: registered device video0 [v4l2]
[   18.212121] saa7133[0]: registered device vbi0
[   18.212156] saa7133[0]: registered device radio0
[   18.216863] saa7134 ALSA driver for DMA sound loaded
[   18.216908] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[   18.223979] dvb_init() allocating 1 frontend
[   18.612100] DVB: registering new adapter (saa7133[0])
[   18.612104] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   18.732006] tda1004x: setting up plls for 48MHz sampling clock
[   20.012214] type=1400 audit(1329051795.827:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=958 comm="apparmor_parser"
[   20.012896] type=1400 audit(1329051795.827:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=958 comm="apparmor_parser"
[   20.013295] type=1400 audit(1329051795.827:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=958 comm="apparmor_parser"
[   20.013482] type=1400 audit(1329051795.827:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=957 comm="apparmor_parser"
[   20.018264] type=1400 audit(1329051795.831:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=962 comm="apparmor_parser"
[   20.021408] type=1400 audit(1329051795.835:13): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=960 comm="apparmor_parser"
[   20.024960] type=1400 audit(1329051795.839:14): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=962 comm="apparmor_parser"
[   20.034288] type=1400 audit(1329051795.847:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=963 comm="apparmor_parser"
[   20.042218] type=1400 audit(1329051795.855:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=960 comm="apparmor_parser"
[   20.050262] type=1400 audit(1329051795.863:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=960 comm="apparmor_parser"
[   20.100537] ppdev: user-space parallel port driver
[   20.140180] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[   20.140288] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   20.140448] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.140555] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.980006] tda1004x: timeout waiting for DSP ready
[   21.020006] tda1004x: found firmware revision 0 -- invalid
[   21.020008] tda1004x: trying to boot from eeprom
[   21.839387] usb 2-6: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   23.348006] tda1004x: timeout waiting for DSP ready
[   23.388005] tda1004x: found firmware revision 0 -- invalid
[   23.388008] tda1004x: waiting for firmware upload...
[   31.008003] eth0: no IPv6 routers present
[   35.824005] tda1004x: found firmware revision 20 -- ok
[   38.205181] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   39.721235] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   39.822908] EXT4-fs (sda3): re-mounted. Opts: commit=0


έχουμε καμία πρόοδο ή έκανα μια τρύπα στο νερό ;
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό the_eye » 12 Φεβ 2012, 16:14

Κώδικας: Επιλογή όλων
[   23.348006] tda1004x: timeout waiting for DSP ready
[   23.388005] tda1004x: found firmware revision 0 -- invalid
[   23.388008] tda1004x: waiting for firmware upload...


Το ίδιο βλέπω !
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11388
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό ALdaperan » 12 Φεβ 2012, 16:17

έκανα κάτι άλλο
Δείτε τώρα ;
Κώδικας: Επιλογή όλων
[    0.235748] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[    0.235751] pci 0000:00:1c.5:   bridge window [io  0xd000-0xdfff]
[    0.235754] pci 0000:00:1c.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.235758] pci 0000:00:1c.5:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.235763] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    0.235764] pci 0000:00:1e.0:   bridge window [io  disabled]
[    0.235768] pci 0000:00:1e.0:   bridge window [mem 0xfeb00000-0xfebfffff]
[    0.235771] pci 0000:00:1e.0:   bridge window [mem pref disabled]
[    0.235791] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.235795] pci 0000:00:01.0: setting latency timer to 64
[    0.235799] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[    0.235804] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.235807] pci 0000:00:1c.0: setting latency timer to 64
[    0.235813] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.235816] pci 0000:00:1c.4: setting latency timer to 64
[    0.235821] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    0.235824] pci 0000:00:1c.5: setting latency timer to 64
[    0.235829] pci 0000:00:1e.0: setting latency timer to 64
[    0.235832] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.235834] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.235836] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235838] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235840] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
[    0.235841] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.235843] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.235845] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.235847] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.235849] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
[    0.235851] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[    0.235853] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.235855] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.235857] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.235858] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.235860] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.235862] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.235864] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[    0.235866] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    0.235868] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    0.235870] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    0.235871] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[    0.235873] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
[    0.235903] NET: Registered protocol family 2
[    0.235963] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.236147] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.236482] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.236658] TCP: Hash tables configured (established 131072 bind 65536)
[    0.236660] TCP reno registered
[    0.236662] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.236669] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.236731] NET: Registered protocol family 1
[    0.236855] pci 0000:01:00.0: Boot video device
[    0.236867] PCI: CLS 32 bytes, default 64
[    0.237017] cpufreq-nforce2: No nForce2 chipset.
[    0.237118] audit: initializing netlink socket (disabled)
[    0.237123] type=2000 audit(1329052483.232:1): initialized
[    0.243797] highmem bounce pool size: 64 pages
[    0.243801] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.245173] VFS: Disk quotas dquot_6.5.2
[    0.245218] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.245724] fuse init (API version 7.16)
[    0.245792] msgmni has been set to 1678
[    0.245970] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.245990] io scheduler noop registered
[    0.245991] io scheduler deadline registered
[    0.246002] io scheduler cfq registered (default)
[    0.246096] pcieport 0000:00:01.0: setting latency timer to 64
[    0.246122] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.246160] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.246190] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.246237] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.246266] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[    0.246316] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.246346] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[    0.246410] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.246428] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.246483] intel_idle: MWAIT substates: 0x22220
[    0.246484] intel_idle: does not run on family 6 model 23
[    0.246562] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    0.246566] ACPI: Power Button [PWRB]
[    0.246602] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.246604] ACPI: Power Button [PWRF]
[    0.246749] ACPI: acpi_idle registered with cpuidle
[    0.247978] ERST: Table is not found!
[    0.248035] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.252054] isapnp: Scanning for PnP cards...
[    0.268360] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.369526] Freeing initrd memory: 12552k freed
[    0.604821] isapnp: No Plug & Play device found
[    0.629594] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.629864] Linux agpgart interface v0.103
[    0.630972] brd: module loaded
[    0.631434] loop: module loaded
[    0.631500] i2c-core: driver [adp5520] using legacy suspend method
[    0.631501] i2c-core: driver [adp5520] using legacy resume method
[    0.631585] ata_piix 0000:00:1f.2: version 2.13
[    0.631606] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.631610] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.631646] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.631908] scsi0 : ata_piix
[    0.631977] scsi1 : ata_piix
[    0.633059] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.633063] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.633079] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.633083] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.633119] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.633291] scsi2 : ata_piix
[    0.633343] scsi3 : ata_piix
[    0.634199] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.634202] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.634251] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.634274] pata_acpi 0000:03:00.0: setting latency timer to 64
[    0.634284] pata_acpi 0000:03:00.0: PCI INT A disabled
[    0.634544] Fixed MDIO Bus: probed
[    0.634575] PPP generic driver version 2.4.2
[    0.634604] tun: Universal TUN/TAP device driver, 1.6
[    0.634605] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.634667] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.634684] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.634691] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.634694] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.634722] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.634756] ehci_hcd 0000:00:1a.7: debug port 1
[    0.638642] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.638653] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.652012] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.652139] hub 1-0:1.0: USB hub found
[    0.652144] hub 1-0:1.0: 6 ports detected
[    0.652227] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.652234] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.652237] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.652264] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.656040] ehci_hcd 0000:00:1d.7: debug port 1
[    0.659913] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.659923] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.672012] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.672141] hub 2-0:1.0: USB hub found
[    0.672145] hub 2-0:1.0: 6 ports detected
[    0.672227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.672237] uhci_hcd: USB Universal Host Controller Interface driver
[    0.672253] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.672257] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.672260] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.672287] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.676045] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.676175] hub 3-0:1.0: USB hub found
[    0.676179] hub 3-0:1.0: 2 ports detected
[    0.676241] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.676245] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.676248] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.676276] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.676312] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.676406] hub 4-0:1.0: USB hub found
[    0.676409] hub 4-0:1.0: 2 ports detected
[    0.676462] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.676466] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.676469] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.676494] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.676523] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.676615] hub 5-0:1.0: USB hub found
[    0.676618] hub 5-0:1.0: 2 ports detected
[    0.676669] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.676673] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.676676] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.676702] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.676731] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.676822] hub 6-0:1.0: USB hub found
[    0.676825] hub 6-0:1.0: 2 ports detected
[    0.676878] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.676882] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.676884] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.676912] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.676941] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.677032] hub 7-0:1.0: USB hub found
[    0.677035] hub 7-0:1.0: 2 ports detected
[    0.677088] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.677093] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.677096] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.677123] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.677152] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.677241] hub 8-0:1.0: USB hub found
[    0.677243] hub 8-0:1.0: 2 ports detected
[    0.677347] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.680130] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.680134] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.680232] mousedev: PS/2 mouse device common for all mice
[    0.680334] rtc_cmos 00:03: RTC can wake from S4
[    0.680375] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.680397] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.680460] device-mapper: uevent: version 1.0.3
[    0.680519] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[    0.680561] device-mapper: multipath: version 1.2.0 loaded
[    0.680563] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.680620] EISA: Probing bus 0 at eisa.0
[    0.680622] EISA: Cannot allocate resource for mainboard
[    0.680623] Cannot allocate resource for EISA slot 1
[    0.680625] Cannot allocate resource for EISA slot 2
[    0.680626] Cannot allocate resource for EISA slot 3
[    0.680627] Cannot allocate resource for EISA slot 4
[    0.680629] Cannot allocate resource for EISA slot 5
[    0.680630] Cannot allocate resource for EISA slot 6
[    0.680631] Cannot allocate resource for EISA slot 7
[    0.680633] Cannot allocate resource for EISA slot 8
[    0.680634] EISA: Detected 0 cards.
[    0.680672] cpuidle: using governor ladder
[    0.680674] cpuidle: using governor menu
[    0.680890] TCP cubic registered
[    0.680994] NET: Registered protocol family 10
[    0.681435] NET: Registered protocol family 17
[    0.681446] Registering the dns_resolver key type
[    0.681476] Using IPI No-Shortcut mode
[    0.681542] PM: Hibernation image not present or could not be loaded.
[    0.681552] registered taskstats version 1
[    0.681804]   Magic number: 0:422:230
[    0.681860] rtc_cmos 00:03: setting system clock to 2012-02-12 13:14:44 UTC (1329052484)
[    0.681862] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.681863] EDD information not available.
[    0.962520] ata3: SATA link down (SStatus 0 SControl 300)
[    0.973042] ata4: SATA link down (SStatus 0 SControl 300)
[    1.096013] usb 2-6: new high speed USB device using ehci_hcd and address 4
[    1.236059] Refined TSC clocksource calibration: 2999.658 MHz.
[    1.236064] Switching to clocksource tsc
[    1.436054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.436064] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.436180] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.436190] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.436199] ata2.01: link offline, clearing class 3 to NONE
[    1.444116] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    1.444120] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.444223] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[    1.460183] ata2.00: configured for UDMA/100
[    1.460233] ata1.00: configured for UDMA/133
[    1.460322] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[    1.460423] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.460434] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.460461] sd 0:0:0:0: [sda] Write Protect is off
[    1.460464] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.460483] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.468750] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH22NS40  NL02 PQ: 0 ANSI: 5
[    1.476953]  sda: sda1 sda2 sda3
[    1.477170] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.477173] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.477215] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.477240] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.477278] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.477370] Freeing unused kernel memory: 700k freed
[    1.477577] Write protecting the kernel text: 5192k
[    1.477609] Write protecting the kernel read-only data: 2152k
[    1.480008] usb 7-2: new low speed USB device using uhci_hcd and address 2
[    1.491556] <30>udev[72]: starting version 167
[    1.546952] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.546963] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.557908] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.578269] ahci 0000:03:00.0: version 3.0
[    1.579257] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.579283] pata_marvell 0000:03:00.0: setting latency timer to 64
[    1.584895] scsi4 : pata_marvell
[    1.584987] scsi5 : pata_marvell
[    1.585060] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    1.585062] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    1.585917] usbcore: registered new interface driver uas
[    1.612062] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[    1.687341] usbcore: registered new interface driver usbhid
[    1.687343] usbhid: USB HID core driver
[    1.791418] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.915064] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    2.112075] firewire_core: created device fw0: GUID 001e8c00015fd8da, S400
[    2.135281] generic-usb 0003:0665:5161.0003: hiddev0,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.2-1/input0
[   13.849161] <30>udev[318]: starting version 167
[   13.868754] Adding 2395132k swap on /dev/sda2.  Priority:-1 extents:1 across:2395132k
[   13.891003] lp: driver loaded but no devices found
[   13.977517] [drm] Initialized drm 1.1.0 20060810
[   14.053943] type=1400 audit(1329052497.869:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=597 comm="apparmor_parser"
[   14.054568] type=1400 audit(1329052497.869:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=597 comm="apparmor_parser"
[   14.054965] type=1400 audit(1329052497.869:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=597 comm="apparmor_parser"
[   14.120136] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[   14.120272] microsoft 0003:045E:00F9.0001: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
[   14.164353] Linux video capture interface: v2.00
[   14.183284] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[   14.183300] usbcore: registered new interface driver usblp
[   14.189555] IR NEC protocol handler initialized
[   14.206061] IR RC5(x) protocol handler initialized
[   14.207983] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[   14.213911] saa7130/34: v4l2 driver version 0.2.16 loaded
[   14.213946] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.213951] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[   14.213956] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[   14.213968] saa7133[0]: board init: gpio is 600e000
[   14.215342] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.215374] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[   14.215392] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.218349] IR RC6 protocol handler initialized
[   14.218888] [drm] radeon defaulting to kernel modesetting.
[   14.218890] [drm] radeon kernel modesetting enabled.
[   14.218921] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.218924] radeon 0000:01:00.0: setting latency timer to 64
[   14.219651] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[   14.219665] [drm] register mmio base: 0xFE8E0000
[   14.219666] [drm] register mmio size: 65536
[   14.219756] ATOM BIOS: Wekiva
[   14.219773] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[   14.219775] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[   14.222393] IR JVC protocol handler initialized
[   14.222446] [drm] Detected VRAM RAM=512M, BAR=256M
[   14.222448] [drm] RAM width 256bits DDR
[   14.222481] [TTM] Zone  kernel: Available graphics memory: 436254 kiB.
[   14.222483] [TTM] Zone highmem: Available graphics memory: 1029890 kiB.
[   14.222484] [TTM] Initializing pool allocator.
[   14.222498] [drm] radeon: 512M of VRAM memory ready
[   14.222500] [drm] radeon: 512M of GTT memory ready.
[   14.222513] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   14.222514] [drm] Driver supports precise vblank timestamp query.
[   14.222548] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[   14.222553] radeon 0000:01:00.0: radeon: using MSI.
[   14.222577] [drm] radeon: irq initialized.
[   14.222579] [drm] GART: num cpu pages 131072, num gpu pages 131072
[   14.222956] [drm] Loading RV770 Microcode
[   14.224789] IR Sony protocol handler initialized
[   14.226951] lirc_dev: IR Remote Control driver registered, major 249
[   14.227833] IR LIRC bridge handler initialized
[   14.258311] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[   14.258516] microsoft 0003:045E:00F9.0002: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
[   14.268928] radeon 0000:01:00.0: WB enabled
[   14.314809] [drm] ring test succeeded in 1 usecs
[   14.314909] [drm] radeon: ib pool ready.
[   14.314964] [drm] ib test succeeded in 0 usecs
[   14.314966] [drm] Enabling audio support
[   14.314972] failed to evaluate ATIF got AE_BAD_PARAMETER
[   14.315184] [drm] Radeon Display Connectors
[   14.315185] [drm] Connector 0:
[   14.315186] [drm]   DVI-I
[   14.315187] [drm]   HPD1
[   14.315189] [drm]   DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[   14.315190] [drm]   Encoders:
[   14.315191] [drm]     DFP1: INTERNAL_UNIPHY
[   14.315192] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   14.315194] [drm] Connector 1:
[   14.315195] [drm]   DIN
[   14.315196] [drm]   Encoders:
[   14.315197] [drm]     TV1: INTERNAL_KLDSCP_DAC2
[   14.315198] [drm] Connector 2:
[   14.315199] [drm]   DVI-I
[   14.315200] [drm]   HPD2
[   14.315201] [drm]   DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[   14.315203] [drm]   Encoders:
[   14.315204] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   14.315205] [drm]     DFP2: INTERNAL_KLDSCP_LVTMA
[   14.320845] Initializing USB Mass Storage driver...
[   14.320925] scsi6 : usb-storage 2-6:1.2
[   14.321007] usbcore: registered new interface driver usb-storage
[   14.321008] USB Mass Storage support registered.
[   14.364163] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   14.364171] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[   14.364178] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[   14.364185] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[   14.364192] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364199] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364206] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364213] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364220] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364227] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364234] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364241] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364248] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364255] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364262] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.364269] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.370570] [drm] Internal thermal controller with fan control
[   14.370623] [drm] radeon: power management initialized
[   14.377535] i2c-core: driver [tuner] using legacy suspend method
[   14.377536] i2c-core: driver [tuner] using legacy resume method
[   14.400104] tuner 5-004b: chip found @ 0x96 (saa7133[0])
[   14.412038] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.462230] [drm] fb mappable at 0xD0142000
[   14.462232] [drm] vram apper at 0xD0000000
[   14.462233] [drm] size 7299072
[   14.462235] [drm] fb depth is 24
[   14.462236] [drm]    pitch is 6912
[   14.462343] fbcon: radeondrmfb (fb0) is primary device
[   14.462490] Console: switching to colour frame buffer device 210x65
[   14.462523] fb0: radeondrmfb frame buffer device
[   14.462524] drm: registered panic notifier
[   14.462529] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[   14.462596] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.462639] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[   14.462658] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.476831] hda-intel: Enable sync_write for AMD chipset
[   14.484010] tda829x 5-004b: setting tuner address to 61
[   14.556004] tda829x 5-004b: type set to tda8290+75a
[   14.848176] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[   15.322888] scsi 6:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[   15.323511] sd 6:0:0:0: Attached scsi generic sg2 type 0
[   15.330120] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   18.316101] saa7133[0]: registered device video0 [v4l2]
[   18.316169] saa7133[0]: registered device vbi0
[   18.316197] saa7133[0]: registered device radio0
[   18.320939] saa7134 ALSA driver for DMA sound loaded
[   18.320961] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[   18.329246] dvb_init() allocating 1 frontend
[   18.716065] DVB: registering new adapter (saa7133[0])
[   18.716068] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   18.844007] tda1004x: setting up plls for 48MHz sampling clock
[   19.192008] tda1004x: found firmware revision 20 -- ok
[   20.015879] ppdev: user-space parallel port driver
[   20.023333] type=1400 audit(1329052503.837:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=977 comm="apparmor_parser"
[   20.024733] type=1400 audit(1329052503.841:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=977 comm="apparmor_parser"
[   20.144319] type=1400 audit(1329052503.961:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=999 comm="apparmor_parser"
[   20.145688] type=1400 audit(1329052503.961:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=998 comm="apparmor_parser"
[   20.146828] type=1400 audit(1329052503.961:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=999 comm="apparmor_parser"
[   20.147228] type=1400 audit(1329052503.961:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=999 comm="apparmor_parser"
[   20.152351] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[   20.152567] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.153560] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[   20.153668] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.158107] type=1400 audit(1329052503.973:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1000 comm="apparmor_parser"
[   20.168033] type=1400 audit(1329052503.985:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1008 comm="apparmor_parser"
[   20.172777] type=1400 audit(1329052503.989:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1008 comm="apparmor_parser"
[   20.173425] type=1400 audit(1329052503.989:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1000 comm="apparmor_parser"
[   21.937877] usb 2-6: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   22.177124] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   22.897854] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[   22.996522] EXT4-fs (sda3): re-mounted. Opts: commit=0
[   30.848006] eth0: no IPv6 routers present
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό the_eye » 12 Φεβ 2012, 16:18

Κώδικας: Επιλογή όλων
[   19.192008] tda1004x: found firmware revision 20 -- ok


Πρέπει να είσαι οκ
Για δοκίμασε με metv
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11388
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό ALdaperan » 12 Φεβ 2012, 16:39

To metv θέλει κάποιο αρχείο channel.conf για την περιοχή που βρίσκεσαι για να βρεί κανάλια
Για την Πάτρα δε ξέρω πώς θα τα βρώ τα κανάλια .. έχει μόνο για Αθήνα σαν προεπιλογή
Δοκίμασα Αθήνα αλλά δε βρίσκει τίποτα
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια

Δημοσίευσηαπό simosx » 12 Φεβ 2012, 17:08

the_eye έγραψε: [ 19.192008] tda1004x: found firmware revision 20 -- ok

Πρέπει να είσαι οκ


Ναι, τώρα είναι μια χαρά. Πες τι ακριβώς άλλαξε ώστε να μπει η αλλαγή και στο 12.04.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση

Re: Κάρτα τηλεόρασης και ψηφιακά κανάλια  Το θέμα επιλύθηκε

Δημοσίευσηαπό OPanos » 12 Φεβ 2012, 17:12

ALdaperan έγραψε:To metv θέλει κάποιο αρχείο channel.conf για την περιοχή που βρίσκεσαι για να βρεί κανάλια
Για την Πάτρα δε ξέρω πώς θα τα βρώ τα κανάλια .. έχει μόνο για Αθήνα σαν προεπιλογή
Δοκίμασα Αθήνα αλλά δε βρίσκει τίποτα


Αν εννοείς που εκπέμπει:

Κέντρο Εκπομπής Αρόης
(Πάτρα)

Από το συγκεκριμένο κέντρο εκπομπής
έχει ξεκινήσει η εκπομπή ψηφιακού σήματος
από τις 3 Φεβρουαρίου 2012

Οι συχνότητες εκπομπής είναι οι εξής:
44 (658 MHz) ALPHA, ALTER, ANT1, ΜΑΚΕΔΟΝΙΑ TV και
46 (674 MHz) MEGA, ΣΚΑΪ, STAR.

http://www.digea.gr/map/map2.php
Linux: Στο Δημοτικό ┃ Προγραμματισμός: Μπα ┃ Αγγλικά: Προχωρημένος
Laptop :
Arch x64

Intel Core i5-2410M CPU @ 2.30GHz ‖ RAM 3943 MiB ‖ Acer JE70_HR - Acer Aspire 7750G
Catalyst-12.8.1 [AMD Radeon HD 6600M Series] [1002:6741]
Netbook
Arch x64-[XFCE4]
Intel Atom CPU N455 1.66GHz ‖ RAM 983 MiB ‖ Hewlett-Packard 148A - HP Mini 110-3100
Άβαταρ μέλους
OPanos
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 768
Εγγραφή: 15 Οκτ 2011, 17:49
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Περιφερειακά