usb to gameport - Joystick Calibration

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

usb to gameport - Joystick Calibration

Δημοσίευσηαπό cdmc » 23 Μαρ 2017, 02:17

Καλησπέρα !

Πρόσφατα ανακάλυψα σε ένα κουτί 2 Joysticks σε πολυ καλή κατάσταση. Τα γνωστά σε όλους όσους είχαν amiga και όχι μόνο, pac-man ή tomahawk που δυστυχώς δεν κατασκευάζονται πλέον.

Αλλά ας περάσουμε στο πρόβλημα αυτά τα 2 axis joystics μπαίνουν σε gameport θυρα 15 Pin (D-sub DA-15) που στα παλιότερα μηχανήματα ήταν στην κάρτα ήχου. Σήμερα λοιπόν αγόρασα έναν αντάπτορα usb to gameport της logilink http://www.logilink.de/Suche/ua0052c μιας και το pc μου δεν εχει τέτοια θύρα και το έβαλα σε δράση. Άνοιξα το FS UAE και είπα να παίξω sensible world of soccer να θυμηθώ τα νιάτα μου.

Αλλά εκεί αρχίζουν τα προβλήματα το χειριστήριο κινείται μόνο πάνω και αριστερά όπως του φίλου h_tsopelas https://forum.ubuntu-gr.org/viewtopic.php?f=42&t=31799&p=333990&hilit=joystick#p333990

Κατέβασα το jstest-gtk του έκανα calibration όλα καλά στο jstest-gtk και ξανατρέχω το FS UAE και απογοήτευση ξάνα μόνο πάνω και αριστερά, δοκιμάζω και το MAME για να είμαι σίγουρος ότι δεν είναι του FS UAE το πρόβλημα και έχω τα ίδια αποτελέσματα. Θεώρησα ότι ίσως να ήταν πρόβλημα των joysticks και τα δοκίμασα στα WINDOWS 7 και διαπίστωσα το ίδιο πρόβλημα μέχρι που έκανα calibration από εκεί και πέρα δουλεύουν κανονικά και τα 2.

Συνεπώς κάτι δεν κάνω καλά στο ubuntu (16.04) !!!

Έψαξα όλο το βράδυ στο forum και σε άλλα forums διάβασα διάφορα αλλά η μόνη αναφορά παρόμοια αν όχι ακριβώς η ίδια ήταν του φίλου h_tsopelas που δεν απάντησε ποτέ κανείς στο πρόβλημα του.

Γι' αυτό αποφάσισα να ζητήσω την βοήθεια της δικής μας κοινότητας και ελπίζω να με βοηθήσετε να βρούμε την λύση.

Ευχαριστώ εκ τον προτέρων
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-27-generic-pae 32bit (el_GR.UTF-8), Ubuntu 3.2.0-23-generic-pae, Microsoft Windows XP Home Edition
3 Intel Pentium 4 CPU 3.20GHz ‖ RAM 1001 MiB ‖ I865P/PE - infoquest
4 nVidia NV34 [GeForce FX 5200] [10de:0322] (rev a1)
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) ⋮ wlan0: Atheros Inc. AR9227 Wireless Network Adapter [168c:002d] (rev 01)
cdmc
babeTUX
babeTUX
 
Δημοσιεύσεις: 13
Εγγραφή: 29 Ιούλ 2012, 12:46
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό the_eye » 23 Μαρ 2017, 22:07

Δώσε το αποτέλεσμα των εντολών αφού κάνεις επανεκκίνηση και μετά συνδέσεις τον adaptor.

Κώδικας: Επιλογή όλων
dmesg
lsusb
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό cdmc » 24 Μαρ 2017, 17:20

Καλησπέρα το αποτέλεσμα είναι :

Κώδικας: Επιλογή όλων
cdmc@cdmc2-ubuntu:~$ dmesg
[    0.000000] microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-66-generic (buildd@lgw01-28) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.4) ) #87-Ubuntu SMP Fri Mar 3 15:29:05 UTC 2017 (Ubuntu 4.4.0-66.87-generic 4.4.44)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=06081581-dad2-44f9-9e8d-40905d0255f5 ro quiet splash vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df76ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df770000-0x00000000df787fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000df788000-0x00000000df7dbfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000df7dc000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000117ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: System manufacturer System Product Name/P7H55-M LX, BIOS 0402    10/29/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x118000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DFFFF uncachable
[    0.000000]   E0000-E7FFF write-through
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 11C000000 mask FFC000000 uncachable
[    0.000000]   1 base 000000000 mask F00000000 write-back
[    0.000000]   2 base 100000000 mask FE0000000 write-back
[    0.000000]   3 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT 
[    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 4544MB, range: 64MB, type UC
[    0.000000] reg 1, base: 0GB, range: 4GB, type WB
[    0.000000] reg 2, base: 4GB, range: 512MB, type WB
[    0.000000] reg 3, base: 3584MB, range: 512MB, type UC
[    0.000000] total RAM covered: 4032M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K    chunk_size: 128M    num_reg: 5     lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3GB, range: 512MB, type WB
[    0.000000] reg 3, base: 4GB, range: 512MB, type WB
[    0.000000] reg 4, base: 4544MB, range: 64MB, type UC
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf770 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[    0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[    0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[    0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[    0.000000] BRK [0x02210000, 0x02210fff] PGTABLE
[    0.000000] BRK [0x02211000, 0x02211fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337f8000-0x35bf3fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FB980 000024 (v02 ACPIAM)
[    0.000000] ACPI: XSDT 0x00000000DF770100 000064 (v01 eshop  eshopoem 20101029 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000DF770290 0000F4 (v03 eshop  eshopoem 20101029 MSFT 00000097)
[    0.000000] ACPI: DSDT 0x00000000DF7704A0 007691 (v01 A1702  A1702001 00000001 INTL 20060113)
[    0.000000] ACPI: FACS 0x00000000DF788000 000040
[    0.000000] ACPI: FACS 0x00000000DF788000 000040
[    0.000000] ACPI: SLIC 0x00000000000FF200 000176 (v01 eshop  eshopoem 000006C1 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000DF770390 0000CC (v01 eshop  APIC1551 20101029 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000DF770460 00003C (v01 eshop  OEMMCFG  20101029 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000DF788040 000073 (v01 eshop  OEMB1551 20101029 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DF777B40 000038 (v01 eshop  OEMHPET  20101029 MSFT 00000097)
[    0.000000] ACPI: DMAR 0x00000000DF7880C0 0000A8 (v01 AMI    OEMDMAR  00000001 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000DF789990 000363 (v01 DpgPmm CpuPm    00000012 INTL 20060113)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000117ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x117ff9000-0x117ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000117ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000df76ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000117ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000117ffffff]
[    0.000000] On node 0 totalpages: 1013516
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14238 pages used for memmap
[    0.000000]   DMA32 zone: 911216 pages, LIFO batch:31
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 98304 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf770000-0xdf787fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf788000-0xdf7dbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf7dc000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 33 pages/cpu @ffff880113400000 s98264 r8192 d28712 u262144
[    0.000000] pcpu-alloc: s98264 r8192 d28712 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 997657
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-66-generic root=UUID=06081581-dad2-44f9-9e8d-40905d0255f5 ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at /build/linux-9yOF0g/linux-4.4.0/drivers/iommu/dmar.c:832 warn_invalid_dmar+0x79/0x90()
[    0.000000] Your BIOS is broken; DMAR reported at address fed93000 returns all ones!
               BIOS vendor: American Megatrends Inc.; Ver: 0402   ; Product Version: System Version
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.0-66-generic #87-Ubuntu
[    0.000000] Hardware name: System manufacturer System Product Name/P7H55-M LX, BIOS 0402    10/29/2010
[    0.000000]  0000000000000086 8c80386f9d8786e2 ffffffff81e03d40 ffffffff813f8083
[    0.000000]  ffffffff81e03d88 ffffffff81d3b330 ffffffff81e03d78 ffffffff810812d2
[    0.000000]  00000000fed93000 ffffffff81d1222b ffffffff8220b01c ffffffff8220b058
[    0.000000] Call Trace:
[    0.000000]  [<ffffffff813f8083>] dump_stack+0x63/0x90
[    0.000000]  [<ffffffff810812d2>] warn_slowpath_common+0x82/0xc0
[    0.000000]  [<ffffffff810813e4>] warn_slowpath_fmt_taint+0x54/0x70
[    0.000000]  [<ffffffff81f9251b>] ? __early_ioremap+0x13e/0x1be
[    0.000000]  [<ffffffff81544859>] warn_invalid_dmar+0x79/0x90
[    0.000000]  [<ffffffff818336c6>] dmar_validate_one_drhd+0x86/0xc0
[    0.000000]  [<ffffffff815449d2>] dmar_walk_remapping_entries+0x82/0x190
[    0.000000]  [<ffffffff81faf3ad>] detect_intel_iommu+0x61/0xf2
[    0.000000]  [<ffffffff81833640>] ? xen_swiotlb_init+0x4a0/0x4a0
[    0.000000]  [<ffffffff81f6cc44>] pci_iommu_alloc+0x50/0x6c
[    0.000000]  [<ffffffff81f7bf91>] mem_init+0x17/0x9d
[    0.000000]  [<ffffffff81f5dde9>] start_kernel+0x259/0x4a2
[    0.000000]  [<ffffffff81f5d120>] ? early_idt_handler_array+0x120/0x120
[    0.000000]  [<ffffffff81f5d339>] x86_64_start_reservations+0x2a/0x2c
[    0.000000]  [<ffffffff81f5d485>] x86_64_start_kernel+0x14a/0x16d
[    0.000000] ---[ end trace 77c40b00f26f7175 ]---
[    0.000000] Memory: 3866700K/4054064K available (8452K kernel code, 1293K rwdata, 3980K rodata, 1488K init, 1316K bss, 187364K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    Build-time adjustment of leaf fanout to 64.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=16.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
[    0.000000] NR_IRQS:33024 nr_irqs:552 16
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3066.633 MHz processor
[    0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 6133.26 BogoMIPS (lpj=12266532)
[    0.000036] pid_max: default: 32768 minimum: 301
[    0.000043] ACPI: Core revision 20150930
[    0.005607] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.005633] Security Framework initialized
[    0.005635] Yama: becoming mindful.
[    0.005658] AppArmor: AppArmor initialized
[    0.005940] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.006836] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.007245] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007251] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.007488] Initializing cgroup subsys io
[    0.007493] Initializing cgroup subsys memory
[    0.007501] Initializing cgroup subsys devices
[    0.007504] Initializing cgroup subsys freezer
[    0.007507] Initializing cgroup subsys net_cls
[    0.007510] Initializing cgroup subsys perf_event
[    0.007513] Initializing cgroup subsys net_prio
[    0.007517] Initializing cgroup subsys hugetlb
[    0.007519] Initializing cgroup subsys pids
[    0.007540] CPU: Physical Processor ID: 0
[    0.007541] CPU: Processor Core ID: 0
[    0.007547] mce: CPU supports 9 MCE banks
[    0.007558] CPU0: Thermal monitoring enabled (TM1)
[    0.007565] process: using mwait in idle threads
[    0.007569] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.007570] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.007885] Freeing SMP alternatives memory: 32K (ffffffff820b9000 - ffffffff820c1000)
[    0.031916] ftrace: allocating 32123 entries in 126 pages
[    0.046356] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.046360] smpboot: Max logical packages: 8
[    0.046375] DMAR: Host address width 36
[    0.046376] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.046382] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[    0.046384] DMAR: DRHD base: 0x000000fed93000 flags: 0x1
[    0.046392] DMAR: Failed to map dmar1
[    0.046394] DMAR: Parse DMAR table failure.
[    0.046398] Switched APIC routing to physical flat.
[    0.046781] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.190943] smpboot: CPU0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz (family: 0x6, model: 0x25, stepping: 0x5)
[    0.190965] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.190982] core: CPUID marked event: 'bus cycles' unavailable
[    0.190985] ... version:                3
[    0.190986] ... bit width:              48
[    0.190987] ... generic registers:      4
[    0.190988] ... value mask:             0000ffffffffffff
[    0.190988] ... max period:             000000007fffffff
[    0.190989] ... fixed-purpose events:   3
[    0.190990] ... event mask:             000000070000000f
[    0.191921] x86: Booting SMP configuration:
[    0.191923] .... node  #0, CPUs:        #1
[    0.192398] microcode: CPU1 microcode updated early to revision 0x4, date = 2013-06-28
[    0.194760] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.194868]   #2  #3
[    0.199616] x86: Booted up 1 node, 4 CPUs
[    0.199620] smpboot: Total of 4 processors activated (24533.06 BogoMIPS)
[    0.202094] devtmpfs: initialized
[    0.205190] evm: security.selinux
[    0.205191] evm: security.SMACK64
[    0.205192] evm: security.SMACK64EXEC
[    0.205193] evm: security.SMACK64TRANSMUTE
[    0.205193] evm: security.SMACK64MMAP
[    0.205194] evm: security.ima
[    0.205195] evm: security.capability
[    0.205261] PM: Registering ACPI NVS region [mem 0xdf788000-0xdf7dbfff] (344064 bytes)
[    0.205340] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.205419] pinctrl core: initialized pinctrl subsystem
[    0.205528] RTC time: 14:10:05, date: 03/24/17
[    0.205631] NET: Registered protocol family 16
[    0.214953] cpuidle: using governor ladder
[    0.226948] cpuidle: using governor menu
[    0.226954] PCCT header not found.
[    0.227055] ACPI: bus type PCI registered
[    0.227057] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.227118] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.227120] PCI: not using MMCONFIG
[    0.227121] PCI: Using configuration type 1 for base access
[    0.239330] ACPI: Added _OSI(Module Device)
[    0.239332] ACPI: Added _OSI(Processor Device)
[    0.239333] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.239334] ACPI: Added _OSI(Processor Aggregator Device)
[    0.240909] ACPI: Executed 1 blocks of module-level executable AML code
[    0.242672] ACPI: Dynamic OEM Table Load:
[    0.242680] ACPI: SSDT 0xFFFF8801126F0000 001340 (v01 DpgPmm P001Ist  00000011 INTL 20060113)
[    0.242998] ACPI: Dynamic OEM Table Load:
[    0.243002] ACPI: SSDT 0xFFFF8801124C9800 0004D5 (v01 PmRef  P001Cst  00003001 INTL 20060113)
[    0.243500] ACPI: Interpreter enabled
[    0.243516] ACPI: (supports S0 S1 S3 S4 S5)
[    0.243517] ACPI: Using IOAPIC for interrupt routing
[    0.243538] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.244265] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.244276] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.249332] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.249337] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.249474] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.249541] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.249543] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.249544] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.249546] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.249553] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.249751] PCI host bridge to bus 0000:00
[    0.249754] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.249756] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.249757] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.249759] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.249760] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[    0.249761] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed8ffff window]
[    0.249763] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.249770] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[    0.249790] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.249850] pci 0000:00:01.0: [8086:0041] type 01 class 0x060400
[    0.249877] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.249913] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.249962] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.249999] pci 0000:00:16.0: reg 0x10: [mem 0xf7dff000-0xf7dff00f 64bit]
[    0.250072] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.250143] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.250166] pci 0000:00:1a.0: reg 0x10: [mem 0xf7dfe000-0xf7dfe3ff]
[    0.250227] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.250264] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.250298] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.250319] pci 0000:00:1b.0: reg 0x10: [mem 0xf7df8000-0xf7dfbfff 64bit]
[    0.250370] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.250435] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.250488] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.250526] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.250560] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[    0.250609] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.250646] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.250679] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400
[    0.250731] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.250768] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.250802] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.250826] pci 0000:00:1d.0: reg 0x10: [mem 0xf7dfd000-0xf7dfd3ff]
[    0.250886] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.250924] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.250954] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.251020] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.251052] pci 0000:00:1f.0: [8086:3b06] type 00 class 0x060100
[    0.251199] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[    0.251219] pci 0000:00:1f.2: reg 0x10: [io  0xc880-0xc887]
[    0.251225] pci 0000:00:1f.2: reg 0x14: [io  0xc800-0xc803]
[    0.251231] pci 0000:00:1f.2: reg 0x18: [io  0xc480-0xc487]
[    0.251237] pci 0000:00:1f.2: reg 0x1c: [io  0xc400-0xc403]
[    0.251243] pci 0000:00:1f.2: reg 0x20: [io  0xc080-0xc09f]
[    0.251249] pci 0000:00:1f.2: reg 0x24: [mem 0xf7df7000-0xf7df77ff]
[    0.251274] pci 0000:00:1f.2: PME# supported from D3hot
[    0.251336] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.251349] pci 0000:00:1f.3: reg 0x10: [mem 0xf7dfc000-0xf7dfc0ff 64bit]
[    0.251366] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.251460] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[    0.251480] pci 0000:01:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.251488] pci 0000:01:00.0: reg 0x18: [mem 0xf7ec0000-0xf7edffff 64bit]
[    0.251493] pci 0000:01:00.0: reg 0x20: [io  0xd000-0xd0ff]
[    0.251503] pci 0000:01:00.0: reg 0x30: [mem 0xf7ea0000-0xf7ebffff pref]
[    0.251524] pci 0000:01:00.0: supports D1 D2
[    0.251561] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.251580] pci 0000:01:00.1: reg 0x10: [mem 0xf7efc000-0xf7efffff 64bit]
[    0.251623] pci 0000:01:00.1: supports D1 D2
[    0.251669] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.251671] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.251673] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.251676] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.251709] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.251746] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.251796] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.251831] pci 0000:02:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.251855] pci 0000:02:00.0: reg 0x18: [mem 0xf6fff000-0xf6ffffff 64bit pref]
[    0.251870] pci 0000:02:00.0: reg 0x20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref]
[    0.251881] pci 0000:02:00.0: reg 0x30: [mem 0xf7ff0000-0xf7ffffff pref]
[    0.251933] pci 0000:02:00.0: supports D1 D2
[    0.251934] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.262498] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.262505] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.262510] pci 0000:00:1c.5:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.262518] pci 0000:00:1c.5:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.262598] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.262605] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.262607] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.262608] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.262609] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.262611] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xf7ffffff window] (subtractive decode)
[    0.262612] pci 0000:00:1e.0:   bridge window [mem 0xfc000000-0xfed8ffff window] (subtractive decode)
[    0.263057] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.263098] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.263136] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.263176] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.263216] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.263256] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.263296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.263336] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[    0.263378] ACPI: Enabled 2 GPEs in block 00 to 3F
[    0.263474] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.263476] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.263477] vgaarb: loaded
[    0.263478] vgaarb: bridge control possible 0000:01:00.0
[    0.263667] SCSI subsystem initialized
[    0.263705] libata version 3.00 loaded.
[    0.263727] ACPI: bus type USB registered
[    0.263742] usbcore: registered new interface driver usbfs
[    0.263749] usbcore: registered new interface driver hub
[    0.263767] usbcore: registered new device driver usb
[    0.263893] PCI: Using ACPI for IRQ routing
[    0.265013] PCI: Discovered peer bus 3f
[    0.265014] PCI: root bus 3f: using default resources
[    0.265015] PCI: Probing PCI hardware (bus 3f)
[    0.265037] ACPI: \: failed to evaluate _DSM (0x1001)
[    0.265038] PCI host bridge to bus 0000:3f
[    0.265040] pci_bus 0000:3f: root bus resource [io  0x0000-0xffff]
[    0.265041] pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
[    0.265043] pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
[    0.265045] pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.265049] pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
[    0.265087] pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
[    0.265123] pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
[    0.265157] pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
[    0.265191] pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
[    0.265224] pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
[    0.265265] pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
[    0.265267] pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.265270] PCI: pci_cache_line_size set to 64 bytes
[    0.265303] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
[    0.265305] e820: reserve RAM buffer [mem 0xdf770000-0xdfffffff]
[    0.265405] NetLabel: Initializing
[    0.265407] NetLabel:  domain hash size = 128
[    0.265407] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.265418] NetLabel:  unlabeled traffic allowed by default
[    0.265479] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.265483] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.267496] amd_nb: Cannot enumerate AMD northbridges
[    0.267509] clocksource: Switched to clocksource hpet
[    0.273126] AppArmor: AppArmor Filesystem Enabled
[    0.273198] pnp: PnP ACPI init
[    0.273278] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.273282] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.273342] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.273475] system 00:02: [io  0x0c00-0x0c0f] has been reserved
[    0.273477] system 00:02: [io  0x0290-0x029f] has been reserved
[    0.273479] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.273480] system 00:02: [io  0x0a30-0x0a3f] has been reserved
[    0.273483] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.273616] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.273619] system 00:03: [io  0x0800-0x087f] could not be reserved
[    0.273620] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.273622] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.273623] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.273625] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.273627] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.273628] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.273631] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.273736] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.273738] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.273740] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.273784] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.274097] pnp 00:06: [dma 0 disabled]
[    0.274160] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.274208] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.274211] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.274339] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.274342] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.274343] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.274345] system 00:08: [mem 0x00100000-0xdfffffff] could not be reserved
[    0.274347] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.274349] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.274442] pnp: PnP ACPI: found 9 devices
[    0.280461] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.280480] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.280482] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.280484] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.280501] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280503] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.280504] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280506] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.280508] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280509] pci 0000:00:1c.0: res[13]=[io  0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[    0.280514] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[    0.280518] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.280520] pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
[    0.280523] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.280525] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.280527] pci 0000:00:01.0:   bridge window [mem 0xf7e00000-0xf7efffff]
[    0.280529] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.280532] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.280534] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.280538] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf01fffff]
[    0.280540] pci 0000:00:1c.0:   bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.280545] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.280553] pci 0000:00:1c.5: PCI bridge to [bus 02]
[    0.280555] pci 0000:00:1c.5:   bridge window [io  0xe000-0xefff]
[    0.280558] pci 0000:00:1c.5:   bridge window [mem 0xf7f00000-0xf7ffffff]
[    0.280561] pci 0000:00:1c.5:   bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.280566] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.280574] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.280576] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.280577] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.280579] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.280580] pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.280582] pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.280583] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.280585] pci_bus 0000:01: resource 1 [mem 0xf7e00000-0xf7efffff]
[    0.280586] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.280588] pci_bus 0000:04: resource 0 [io  0x1000-0x1fff]
[    0.280589] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf01fffff]
[    0.280590] pci_bus 0000:04: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[    0.280592] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.280593] pci_bus 0000:02: resource 1 [mem 0xf7f00000-0xf7ffffff]
[    0.280595] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
[    0.280596] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7 window]
[    0.280598] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff window]
[    0.280599] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.280601] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.280602] pci_bus 0000:05: resource 8 [mem 0xe0000000-0xf7ffffff window]
[    0.280603] pci_bus 0000:05: resource 9 [mem 0xfc000000-0xfed8ffff window]
[    0.280606] pci_bus 0000:3f: resource 4 [io  0x0000-0xffff]
[    0.280607] pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
[    0.280638] NET: Registered protocol family 2
[    0.280811] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.280876] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.280971] TCP: Hash tables configured (established 32768 bind 32768)
[    0.281001] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281017] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.281081] NET: Registered protocol family 1
[    0.281360] pci 0000:01:00.0: Video device with shadowed ROM
[    0.281371] PCI: CLS 32 bytes, default 64
[    0.281419] Trying to unpack rootfs image as initramfs...
[    0.790154] Freeing initrd memory: 36848K (ffff8800337f8000 - ffff880035bf4000)
[    0.790167] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.790169] software IO TLB [mem 0xdb770000-0xdf770000] (64MB) mapped at [ffff8800db770000-ffff8800df76ffff]
[    0.790388] Scanning for low memory corruption every 60 seconds
[    0.790863] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.790931] audit: initializing netlink subsys (disabled)
[    0.790951] audit: type=2000 audit(1490364605.664:1): initialized
[    0.791259] Initialise system trusted keyring
[    0.791349] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.792608] zbud: loaded
[    0.792785] VFS: Disk quotas dquot_6.6.0
[    0.792820] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.793052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.793258] fuse init (API version 7.23)
[    0.793381] Key type big_key registered
[    0.793395] Allocating IMA MOK and blacklist keyrings.
[    0.793690] Key type asymmetric registered
[    0.793692] Asymmetric key parser 'x509' registered
[    0.793727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.793756] io scheduler noop registered
[    0.793758] io scheduler deadline registered (default)
[    0.793787] io scheduler cfq registered
[    0.794015] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[    0.794258] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.794264] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.794288] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[    0.794289] vesafb: scrolling: redraw
[    0.794290] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    0.794303] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90000800000, using 5120k, total 5120k
[    0.794392] Console: switching to colour frame buffer device 160x64
[    0.794422] fb0: VESA VGA frame buffer device
[    0.794437] intel_idle: MWAIT substates: 0x1120
[    0.794438] intel_idle: v0.4.1 model 0x25
[    0.794439] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.794620] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.794623] ACPI: Power Button [PWRB]
[    0.794654] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.794655] ACPI: Power Button [PWRF]
[    0.794807] GHES: HEST is not enabled!
[    0.794882] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.815258] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    0.816938] Linux agpgart interface v0.103
[    0.819414] brd: module loaded
[    0.820573] loop: module loaded
[    0.820744] libphy: Fixed MDIO Bus: probed
[    0.820747] tun: Universal TUN/TAP device driver, 1.6
[    0.820748] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.820779] PPP generic driver version 2.4.2
[    0.820827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.820831] ehci-pci: EHCI PCI platform driver
[    0.820931] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.820937] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.820947] ehci-pci 0000:00:1a.0: debug port 2
[    0.824854] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.824868] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7dfe000
[    0.835532] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.835570] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.835572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.835573] usb usb1: Product: EHCI Host Controller
[    0.835575] usb usb1: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    0.835576] usb usb1: SerialNumber: 0000:00:1a.0
[    0.835886] hub 1-0:1.0: USB hub found
[    0.835903] hub 1-0:1.0: 2 ports detected
[    0.836078] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.836084] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.836093] ehci-pci 0000:00:1d.0: debug port 2
[    0.839989] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.839999] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7dfd000
[    0.851615] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.851691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.851697] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851700] usb usb2: Product: EHCI Host Controller
[    0.851704] usb usb2: Manufacturer: Linux 4.4.0-66-generic ehci_hcd
[    0.851707] usb usb2: SerialNumber: 0000:00:1d.0
[    0.852019] hub 2-0:1.0: USB hub found
[    0.852037] hub 2-0:1.0: 2 ports detected
[    0.852131] ehci-platform: EHCI generic platform driver
[    0.852142] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.852146] ohci-pci: OHCI PCI platform driver
[    0.852155] ohci-platform: OHCI generic platform driver
[    0.852161] uhci_hcd: USB Universal Host Controller Interface driver
[    0.852211] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.852212] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.852381] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.852842] mousedev: PS/2 mouse device common for all mice
[    0.853574] rtc_cmos 00:01: RTC can wake from S4
[    0.853817] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.853852] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.853873] i2c /dev entries driver
[    0.853946] device-mapper: uevent: version 1.0.3
[    0.854132] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.854183] ledtrig-cpu: registered to indicate activity on CPUs
[    0.854890] NET: Registered protocol family 10
[    0.855086] NET: Registered protocol family 17
[    0.855095] Key type dns_resolver registered
[    0.855268] microcode: CPU0 sig=0x20655, pf=0x2, revision=0x4
[    0.855273] microcode: CPU1 sig=0x20655, pf=0x2, revision=0x4
[    0.855279] microcode: CPU2 sig=0x20655, pf=0x2, revision=0x4
[    0.855286] microcode: CPU3 sig=0x20655, pf=0x2, revision=0x4
[    0.855320] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.855440] registered taskstats version 1
[    0.855454] Loading compiled-in X.509 certificates
[    0.856274] Loaded X.509 cert 'Build time autogenerated kernel key: 32ca4feee90b5cde51f5f8c0e024b22f8c679982'
[    0.856292] zswap: loaded using pool lzo/zbud
[    0.857999] Key type trusted registered
[    0.860928] Key type encrypted registered
[    0.860934] AppArmor: AppArmor sha1 policy hashing enabled
[    0.860938] ima: No TPM chip found, activating TPM-bypass!
[    0.860957] evm: HMAC attrs: 0x1
[    0.861204]   Magic number: 9:884:182
[    0.861314] rtc_cmos 00:01: setting system clock to 2017-03-24 14:10:05 UTC (1490364605)
[    0.862103] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.862105] EDD information not available.
[    0.862146] PM: Hibernation image not present or could not be loaded.
[    0.863430] Freeing unused kernel memory: 1488K (ffffffff81f45000 - ffffffff820b9000)
[    0.863431] Write protecting the kernel read-only data: 14336k
[    0.863993] Freeing unused kernel memory: 1776K (ffff880001844000 - ffff880001a00000)
[    0.864271] Freeing unused kernel memory: 116K (ffff880001de3000 - ffff880001e00000)
[    0.876033] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876094] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876106] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876469] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876511] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876728] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876776] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876822] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876867] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.876914] random: udevadm: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[    0.877350] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    0.899796] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.910352] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.910366] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    0.910782] r8169 0000:02:00.0 eth0: RTL8168d/8111d at 0xffffc9000000a000, 20:cf:30:ba:e0:4b, XID 083000c0 IRQ 25
[    0.910785] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    0.911214] ahci 0000:00:1f.2: version 3.0
[    0.911250] [drm] Initialized drm 1.1.0 20060810
[    0.911339] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.923847] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    0.923851] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems sxs apst
[    0.941497] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    0.942936] [drm] radeon kernel modesetting enabled.
[    0.945174] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    0.945177] AMD IOMMUv2 functionality not available on this system
[    0.947896] CRAT table not found
[    0.947898] Finished initializing topology ret=0
[    0.947952] kfd kfd: Initialized module
[    0.948154] checking generic (e0000000 500000) vs hw (e0000000 10000000)
[    0.948156] fb: switching to radeondrmfb from VESA VGA
[    0.948182] Console: switching to colour dummy device 80x25
[    0.948478] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1043:0x0386).
[    0.948489] [drm] register mmio base: 0xF7EC0000
[    0.948490] [drm] register mmio size: 131072
[    0.948526] ATOM BIOS: 68F9.12.18.0.1.AS07
[    0.948578] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    0.948580] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    0.948581] [drm] Detected VRAM RAM=1024M, BAR=256M
[    0.948582] [drm] RAM width 64bits DDR
[    0.948619] [TTM] Zone  kernel: Available graphics memory: 1953480 kiB
[    0.948621] [TTM] Initializing pool allocator
[    0.948624] [TTM] Initializing DMA pool allocator
[    0.948643] [drm] radeon: 1024M of VRAM memory ready
[    0.948644] [drm] radeon: 1024M of GTT memory ready.
[    0.948653] [drm] Loading CEDAR Microcode
[    0.948708] [drm] Internal thermal controller without fan control
[    0.964314] scsi host0: ahci
[    0.964438] scsi host1: ahci
[    0.964544] scsi host2: ahci
[    0.964648] scsi host3: ahci
[    0.964756] scsi host4: ahci
[    0.964858] scsi host5: ahci
[    0.964920] ata1: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7100 irq 26
[    0.964923] ata2: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7180 irq 26
[    0.964926] ata3: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7200 irq 26
[    0.964929] ata4: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7280 irq 26
[    0.964932] ata5: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7300 irq 26
[    0.964935] ata6: SATA max UDMA/133 abar m2048@0xf7df7000 port 0xf7df7380 irq 26
[    0.971554] [drm] radeon: dpm initialized
[    0.971633] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    0.972388] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    0.987102] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[    0.987224] radeon 0000:01:00.0: WB enabled
[    0.987227] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880034466c00
[    0.987229] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880034466c0c
[    0.987978] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc9000101c418
[    0.987981] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.987981] [drm] Driver supports precise vblank timestamp query.
[    0.987983] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    0.988024] radeon 0000:01:00.0: radeon: using MSI.
[    0.988048] [drm] radeon: irq initialized.
[    1.004671] [drm] ring test on 0 succeeded in 1 usecs
[    1.004677] [drm] ring test on 3 succeeded in 2 usecs
[    1.155527] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.171525] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.180347] [drm] ring test on 5 succeeded in 1 usecs
[    1.180352] [drm] UVD initialized successfully.
[    1.180611] [drm] ib test on ring 0 succeeded in 0 usecs
[    1.180636] [drm] ib test on ring 3 succeeded in 0 usecs
[    1.299960] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    1.299962] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.300194] hub 1-1:1.0: USB hub found
[    1.300286] hub 1-1:1.0: 6 ports detected
[    1.315959] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    1.315961] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.316190] hub 2-1:1.0: USB hub found
[    1.316285] hub 2-1:1.0: 8 ports detected
[    1.459589] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.460720] ata1.00: ATA-8: Hitachi HDS721010CLA332, JP4OA3MA, max UDMA/133
[    1.460726] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.461997] ata1.00: configured for UDMA/133
[    1.462365] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HDS72101 A3MA PQ: 0 ANSI: 5
[    1.462676] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.462705] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.462727] sd 0:0:0:0: [sda] Write Protect is off
[    1.462731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.462766] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.498137]  sda: sda1 sda2 sda3 < sda5 > sda4
[    1.498680] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.587613] usb 2-1.1: new low-speed USB device number 3 using ehci-pci
[    1.685633] usb 2-1.1: New USB device found, idVendor=045e, idProduct=076c
[    1.685639] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.685643] usb 2-1.1: Product: Microsoft® Comfort Mouse 4500
[    1.685646] usb 2-1.1: Manufacturer: Microsoft
[    1.689327] hidraw: raw HID events driver (C) Jiri Kosina
[    1.700380] usbcore: registered new interface driver usbhid
[    1.700384] usbhid: USB HID core driver
[    1.702157] input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/0003:045E:076C.0001/input/input3
[    1.756002] microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:1d.0-1.1/input0
[    1.787585] tsc: Refined TSC clocksource calibration: 3066.666 MHz
[    1.787592] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c34469b3ec, max_idle_ns: 440795286947 ns
[    1.827666] [drm] ib test on ring 5 succeeded
[    1.828725] [drm] Radeon Display Connectors
[    1.828726] [drm] Connector 0:
[    1.828727] [drm]   HDMI-A-1
[    1.828728] [drm]   HPD1
[    1.828729] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    1.828730] [drm]   Encoders:
[    1.828731] [drm]     DFP1: INTERNAL_UNIPHY1
[    1.828732] [drm] Connector 1:
[    1.828733] [drm]   DVI-I-1
[    1.828733] [drm]   HPD4
[    1.828735] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    1.828735] [drm]   Encoders:
[    1.828736] [drm]     DFP2: INTERNAL_UNIPHY
[    1.828737] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    1.828738] [drm] Connector 2:
[    1.828738] [drm]   VGA-1
[    1.828739] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    1.828740] [drm]   Encoders:
[    1.828741] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    1.881970] [drm] fb mappable at 0xE045F000
[    1.881971] [drm] vram apper at 0xE0000000
[    1.881972] [drm] size 5242880
[    1.881973] [drm] fb depth is 24
[    1.881973] [drm]    pitch is 5120
[    1.882021] fbcon: radeondrmfb (fb0) is primary device
[    1.882084] Console: switching to colour frame buffer device 160x64
[    1.882116] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    1.891766] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    1.955619] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.957319] ata2.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[    1.959404] ata2.00: configured for UDMA/100
[    1.961408] scsi 1:0:0:0: CD-ROM            Optiarc  DVD RW AD-5260S  1.00 PQ: 0 ANSI: 5
[    1.977449] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    1.977454] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.977755] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.977846] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    2.467627] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.469303] ata3.00: supports DRM functions and may not be fully accessible
[    2.469757] ata3.00: disabling queued TRIM support
[    2.469763] ata3.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[    2.469766] ata3.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.470673] ata3.00: supports DRM functions and may not be fully accessible
[    2.471025] ata3.00: disabling queued TRIM support
[    2.471505] ata3.00: configured for UDMA/133
[    2.471964] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    2.472563] sd 2:0:0:0: Attached scsi generic sg2 type 0
[    2.472610] sd 2:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    2.472959] sd 2:0:0:0: [sdb] Write Protect is off
[    2.472967] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.473222] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.474002]  sdb: sdb1 sdb2 sdb3
[    2.474298] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.787743] clocksource: Switched to clocksource tsc
[    2.791638] ata4: SATA link down (SStatus 0 SControl 300)
[    3.111632] ata5: SATA link down (SStatus 0 SControl 300)
[    3.431636] ata6: SATA link down (SStatus 0 SControl 300)
[    4.059075] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    4.154615] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    4.154730] systemd[1]: Detected architecture x86-64.
[    4.154899] systemd[1]: Set hostname to <cdmc2-ubuntu>.
[    4.241654] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.241702] systemd[1]: Listening on udev Control Socket.
[    4.241713] systemd[1]: Reached target Remote File Systems (Pre).
[    4.241753] systemd[1]: Listening on Journal Socket.
[    4.241771] systemd[1]: Reached target Remote File Systems.
[    4.241778] systemd[1]: Reached target User and Group Name Lookups.
[    4.241784] systemd[1]: Reached target Encrypted Volumes.
[    4.241865] systemd[1]: Created slice System Slice.
[    4.259734] systemd[1]: Mounting POSIX Message Queue File System...
[    4.260167] systemd[1]: Started Braille Device Support.
[    4.261954] systemd[1]: Starting Load Kernel Modules...
[    4.262648] systemd[1]: Mounting Huge Pages File System...
[    4.265225] systemd[1]: Mounting Debug File System...
[    4.265372] systemd[1]: Created slice User and Session Slice.
[    4.265883] systemd[1]: Starting Uncomplicated firewall...
[    4.265965] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.266024] systemd[1]: Listening on fsck to fsckd communication Socket.
[    4.266541] systemd[1]: Started Read required files in advance.
[    4.267247] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.267349] systemd[1]: Listening on Journal Audit Socket.
[    4.267854] systemd[1]: Listening on udev Kernel Socket.
[    4.267882] systemd[1]: Reached target Slices.
[    4.268305] systemd[1]: Starting Set console keymap...
[    4.268610] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.268669] systemd[1]: Listening on Syslog Socket.
[    4.269195] systemd[1]: Starting Journal Service...
[    4.269608] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.273301] systemd[1]: Mounted Huge Pages File System.
[    4.273346] systemd[1]: Mounted Debug File System.
[    4.273375] systemd[1]: Mounted POSIX Message Queue File System.
[    4.273778] systemd[1]: Started Uncomplicated firewall.
[    4.273976] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    4.280788] lp: driver loaded but no devices found
[    4.284039] ppdev: user-space parallel port driver
[    4.288976] systemd[1]: Started Load Kernel Modules.
[    4.331722] systemd[1]: Mounting FUSE Control File System...
[    4.332364] systemd[1]: Starting Apply Kernel Variables...
[    4.332935] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.334397] systemd[1]: Mounted FUSE Control File System.
[    4.334523] systemd[1]: Started Journal Service.
[    4.521403] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[    4.565370] systemd-journald[257]: Received request to flush runtime journal from PID 1
[    4.665227] random: nonblocking pool is initialized
[    4.683740] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.725038] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20150930/utaddress-254)
[    4.725046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.725051] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.SBRG.SIOR.GPS0) (20150930/utaddress-254)
[    4.725055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.725057] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (\_SB_.PCI0.SBRG.SIOR.GPS0) (20150930/utaddress-254)
[    4.725062] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.725100] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.727121] audit: type=1400 audit(1490364609.358:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/ubuntu-core-launcher" pid=504 comm="apparmor_parser"
[    4.739431] audit: type=1400 audit(1490364609.370:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=500 comm="apparmor_parser"
[    4.739442] audit: type=1400 audit(1490364609.370:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=500 comm="apparmor_parser"
[    4.741575] audit: type=1400 audit(1490364609.374:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=501 comm="apparmor_parser"
[    4.741584] audit: type=1400 audit(1490364609.374:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=501 comm="apparmor_parser"
[    4.741590] audit: type=1400 audit(1490364609.374:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=501 comm="apparmor_parser"
[    4.741596] audit: type=1400 audit(1490364609.374:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=501 comm="apparmor_parser"
[    4.746024] audit: type=1400 audit(1490364609.378:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=520 comm="apparmor_parser"
[    4.746036] audit: type=1400 audit(1490364609.378:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=520 comm="apparmor_parser"
[    4.789780] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.798322] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input4
[    4.807615] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708S: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
[    4.807619] snd_hda_codec_via hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    4.807621] snd_hda_codec_via hdaudioC0D0:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
[    4.807623] snd_hda_codec_via hdaudioC0D0:    mono: mono_out=0x0
[    4.807625] snd_hda_codec_via hdaudioC0D0:    dig-out=0x20/0x0
[    4.807626] snd_hda_codec_via hdaudioC0D0:    inputs:
[    4.807629] snd_hda_codec_via hdaudioC0D0:      Rear Mic=0x1a
[    4.807631] snd_hda_codec_via hdaudioC0D0:      Front Mic=0x1e
[    4.807633] snd_hda_codec_via hdaudioC0D0:      Line=0x1b
[    4.815427] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    4.815507] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    4.815594] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    4.815773] input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    4.815870] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    4.853124] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[    5.096973] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    5.655322] Adding 6963196k swap on /dev/sda4.  Priority:-1 extents:1 across:6963196k FS
[    5.944143] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    6.008940] r8169 0000:02:00.0 enp2s0: link down
[    6.008954] r8169 0000:02:00.0 enp2s0: link down
[    6.009010] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    7.782766] r8169 0000:02:00.0 enp2s0: link up
[    7.782783] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   32.915961] usb 1-1.2: new low-speed USB device number 3 using ehci-pci
[   33.449721] usb 1-1.2: New USB device found, idVendor=0583, idProduct=2033
[   33.449727] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   33.449731] usb 1-1.2: Product: 2-axis,8button gamepad
[   33.449735] usb 1-1.2: Manufacturer: Padix Co. Ltd.
[   33.462970] input: Padix Co. Ltd. 2-axis,8button gamepad as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0583:2033.0002/input/input10
[   33.516385] hid-generic 0003:0583:2033.0002: input,hidraw1: USB HID v1.10 Gamepad [Padix Co. Ltd. 2-axis,8button gamepad] on usb-0000:00:1a.0-1.2/input0
cdmc@cdmc2-ubuntu:~$ lsusb
Bus 002 Device 003: ID 045e:076c Microsoft Corp. Comfort Mouse 4500
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0583:2033 Padix Co., Ltd (Rockfire) RM-203 USB Nest [mode 4]
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
cdmc@cdmc2-ubuntu:~$


είναι όπως μου ζήτησες μετά από επανεκκίνηση και αφού έγινε μετά σύνδεσα τον αντάπτορα.
Σημειωτέων δεν έχω καμία άλλη USB συσκευή συνδεδεμένη (μόνο mouse και πληκτρολόγιο , γενικά έχω εκτυπωτή, scanner κτλ).
Τελευταία επεξεργασία από the_eye και 24 Μαρ 2017, 18:32, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Το κώδικα τον βάζουμε μέσα σε <code> bbcode
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-27-generic-pae 32bit (el_GR.UTF-8), Ubuntu 3.2.0-23-generic-pae, Microsoft Windows XP Home Edition
3 Intel Pentium 4 CPU 3.20GHz ‖ RAM 1001 MiB ‖ I865P/PE - infoquest
4 nVidia NV34 [GeForce FX 5200] [10de:0322] (rev a1)
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) ⋮ wlan0: Atheros Inc. AR9227 Wireless Network Adapter [168c:002d] (rev 01)
cdmc
babeTUX
babeTUX
 
Δημοσιεύσεις: 13
Εγγραφή: 29 Ιούλ 2012, 12:46
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό the_eye » 25 Μαρ 2017, 22:35

Δοκίμασε calibration με
Κώδικας: Επιλογή όλων
gksudo jstest-gtk
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό cdmc » 26 Μαρ 2017, 14:28

Καλημέρα φίλε the_eye

Έκανα ακριβώς ότι μου είπες αλλά δυστυχώς τίποτα.

Επίσης δοκίμασα να τρέξω mame και FS UAE με ένα joypad saitek που βρήκα και τρέχουν κανονικά ο χειρισμός είναι άψογος.

Να αναφέρω λοιπόν τι έχω παρατηρήσει.

Όταν κάνουμε calibration με το jstest δείχνει ότι είναι σεταρισμένο και ότι λειτουργεί σωστά, αλλά στα προγράμματα πηγαίνει μόνο πάνω κι αριστερά.
Επίσης μετά από restart δεν κρατά τις ρυθμίσεις σαν να μην έγινε ποτέ calibration.
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-27-generic-pae 32bit (el_GR.UTF-8), Ubuntu 3.2.0-23-generic-pae, Microsoft Windows XP Home Edition
3 Intel Pentium 4 CPU 3.20GHz ‖ RAM 1001 MiB ‖ I865P/PE - infoquest
4 nVidia NV34 [GeForce FX 5200] [10de:0322] (rev a1)
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) ⋮ wlan0: Atheros Inc. AR9227 Wireless Network Adapter [168c:002d] (rev 01)
cdmc
babeTUX
babeTUX
 
Δημοσιεύσεις: 13
Εγγραφή: 29 Ιούλ 2012, 12:46
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό the_eye » 26 Μαρ 2017, 14:46

Αν κάνεις calibration βγεις από το πρόγραμμα και ξαναμπείς για calibration είναι οκ ή όχι.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό cdmc » 26 Μαρ 2017, 14:51

Μέχρι να γίνει restart το κρατάει ακόμη κι αν μπω στο mame για παράδειγμα που δεν λειτουργεί σωστά αν τρεξω το Jtest-gtk δείχνει οκ
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-27-generic-pae 32bit (el_GR.UTF-8), Ubuntu 3.2.0-23-generic-pae, Microsoft Windows XP Home Edition
3 Intel Pentium 4 CPU 3.20GHz ‖ RAM 1001 MiB ‖ I865P/PE - infoquest
4 nVidia NV34 [GeForce FX 5200] [10de:0322] (rev a1)
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) ⋮ wlan0: Atheros Inc. AR9227 Wireless Network Adapter [168c:002d] (rev 01)
cdmc
babeTUX
babeTUX
 
Δημοσιεύσεις: 13
Εγγραφή: 29 Ιούλ 2012, 12:46
Εκτύπωση

Re: usb to gameport - Joystick Calibration

Δημοσίευσηαπό the_eye » 26 Μαρ 2017, 17:47

Για δες αυτό το θέμα
https://ubuntuforums.org/showthread.php?t=338457
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση


Επιστροφή στο Περιφερειακά