Καρτα τηλεορασης avermedia nano express

[cv19985]

Καλησπερα,
σαν αρχαριος χρηστης θελω την βοηθεια σας.
Εβαλα το ubuntu 8.10 και ενω σχεδον ολο το υλικο αναγνωριζεται κανονικα, εχω προβλημα με την καρτα τηλεορασης της avermedia hybrid nanoexpress.
Αφου εψαξα λιγο μεσω google δεν βρηκα υποστηριζομενους drivers για ubuntu. Μηπως γνωριζει κανεις αν γινεται αυτη να αναγνωριστει και να δουλεψει κανονικα?

[modenas88]

Καλώς ήλθες,

Για να πάρεις περισσότερα αποτελέσματα, δώσε αν θες τα αποτελέσματα των:

Κώδικας: Επιλογή όλων

lspci -nn

ή αν η κάρτα συνδέεται με usb τότε:

Κώδικας: Επιλογή όλων

lsusb

ανάμεσα σε Code]. . . . . [/Code

Αυτό για να δούμε πια συγκεκριμένα κάρτα έχεις...

[cv19985]

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port [8086:2a01] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 8600M GS [10de:0425] (rev a1)
02:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g [14e4:4315] (rev 01)
04:00.0 Multimedia controller [0480]: Philips Semiconductors Device [1131:7160] (rev 03)
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
09:09.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
09:09.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
09:09.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller [1180:0843] (rev 12)
09:09.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
09:09.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev ff)


Με εντολη lspci -vnn εχω εκτος των αλλων:

Κώδικας: Επιλογή όλων

04:00.0 Multimedia controller [0480]: Philips Semiconductors Device [1131:7160] (rev 03)
Subsystem: Avermedia Technologies Inc Device [1461:2355]
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at f6000000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>


(εκανα κοπι-παστε μονο το σχετικο με avermedia...)

Να αναφερω πως πλεον εχω UBUNTU 9.04

[logari81]

1131:7160

καταρχήν κανονικα δεν χρειάζεται να ψαξεις εσυ για drivers, αν υπαρχουν θα ειναι ήδη ενσωματωμένοι εκτός αν είναι πολύ καινούριοι. Δοκιμασε κάποιο απο τα προγράμματα tvtime, xawtv κι αν δεν δουλευει, ποσταρε εδω το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

και πόσταρε την σχετική εμπειρία σου κι εδώ:
https://bugs.launchpad.net/ubuntu/+bug/215624

[cv19985]

Κανενα απο τα προγραμματα που ανεφερες δεν λειτουργησαν με την καρτα τηλεορασης.
Τα αποτελεσματα της εντολης dmseg:

Κώδικας: Επιλογή όλων

[ 0.402053] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.402131] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 0.402134] pci 0000:00:01.0: bridge 32bit mmio: [0xcc000000-0xceffffff]
[ 0.402138] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.402335] pci 0000:02:00.0: reg 10 64bit mmio: [0xf4000000-0xf4003fff]
[ 0.402459] pci 0000:02:00.0: supports D1 D2
[ 0.402572] pci 0000:00:1c.0: bridge io port: [0x4000-0x7fff]
[ 0.402577] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.402584] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.402648] pci 0000:04:00.0: reg 10 64bit mmio: [0xf6000000-0xf60fffff]
[ 0.402716] pci 0000:04:00.0: supports D1 D2
[ 0.402718] pci 0000:04:00.0: PME# supported from D0 D1 D2
[ 0.402724] pci 0000:04:00.0: PME# disabled
[ 0.402798] pci 0000:00:1c.1: bridge io port: [0x8000-0xbfff]
[ 0.402802] pci 0000:00:1c.1: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.402809] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.404065] pci 0000:08:00.0: reg 10 io port: [0xc000-0xc0ff]
[ 0.404094] pci 0000:08:00.0: reg 18 64bit mmio: [0xf8000000-0xf8000fff]
[ 0.404122] pci 0000:08:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.404136] pci 0000:08:00.0: supports D1 D2
[ 0.404138] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.404143] pci 0000:08:00.0: PME# disabled
[ 0.404212] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
[ 0.404216] pci 0000:00:1c.5: bridge 32bit mmio: [0xf8000000-0xf80fffff]
[ 0.404277] pci 0000:09:09.0: reg 10 32bit mmio: [0xf8100000-0xf81007ff]
[ 0.404323] pci 0000:09:09.0: supports D1 D2
[ 0.404325] pci 0000:09:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404329] pci 0000:09:09.0: PME# disabled
[ 0.404369] pci 0000:09:09.1: reg 10 32bit mmio: [0xf8100800-0xf81008ff]
[ 0.404418] pci 0000:09:09.1: supports D1 D2
[ 0.404419] pci 0000:09:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404424] pci 0000:09:09.1: PME# disabled
[ 0.404463] pci 0000:09:09.2: reg 10 32bit mmio: [0xf8100c00-0xf8100cff]
[ 0.404510] pci 0000:09:09.2: supports D1 D2
[ 0.404512] pci 0000:09:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404516] pci 0000:09:09.2: PME# disabled
[ 0.404556] pci 0000:09:09.3: reg 10 32bit mmio: [0xf8101000-0xf81010ff]
[ 0.404603] pci 0000:09:09.3: supports D1 D2
[ 0.404604] pci 0000:09:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404608] pci 0000:09:09.3: PME# disabled
[ 0.404649] pci 0000:09:09.4: reg 10 32bit mmio: [0xf8101400-0xf81014ff]
[ 0.404695] pci 0000:09:09.4: supports D1 D2
[ 0.404697] pci 0000:09:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.404701] pci 0000:09:09.4: PME# disabled
[ 0.404751] pci 0000:00:1e.0: transparent bridge
[ 0.404758] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8100000-0xf81fffff]
[ 0.404792] bus 00 -> node 0
[ 0.404797] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.405081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.405199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.405314] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.405429] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.405553] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.412936] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.413035] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.413131] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.413228] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.413325] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.413422] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.413518] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.413614] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.413865] ACPI: WMI: Mapper loaded
[ 0.413891] SCSI subsystem initialized
[ 0.413891] libata version 3.00 loaded.
[ 0.413891] usbcore: registered new interface driver usbfs
[ 0.413891] usbcore: registered new interface driver hub
[ 0.413891] usbcore: registered new device driver usb
[ 0.413891] PCI: Using ACPI for IRQ routing
[ 0.420007] Bluetooth: Core ver 2.13
[ 0.420018] NET: Registered protocol family 31
[ 0.420018] Bluetooth: HCI device and connection manager initialized
[ 0.420018] Bluetooth: HCI socket layer initialized
[ 0.420018] NET: Registered protocol family 8
[ 0.420018] NET: Registered protocol family 20
[ 0.420025] NetLabel: Initializing
[ 0.420026] NetLabel: domain hash size = 128
[ 0.420027] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.420037] NetLabel: unlabeled traffic allowed by default
[ 0.420049] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.420053] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.424043] AppArmor: AppArmor Filesystem Enabled
[ 0.432005] pnp: PnP ACPI init
[ 0.432011] ACPI: bus type pnp registered
[ 0.435929] pnp: PnP ACPI: found 11 devices
[ 0.435931] ACPI: ACPI bus type pnp unregistered
[ 0.435933] PnPBIOS: Disabled by ACPI PNP
[ 0.435940] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.435942] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.435944] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.435946] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.435948] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.435950] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.435952] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.435954] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.435959] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.435964] system 00:06: ioport range 0x380-0x383 has been reserved
[ 0.435966] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.435968] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.435970] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.435972] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.435973] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.435975] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 0.435979] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 0.435981] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 0.470642] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.470644] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.470646] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 0.470650] pci 0000:00:01.0: MEM window: 0xcc000000-0xceffffff
[ 0.470652] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.470656] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.470660] pci 0000:00:1c.0: IO window: 0x4000-0x7fff
[ 0.470665] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.470669] pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
[ 0.470676] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.470679] pci 0000:00:1c.1: IO window: 0x8000-0xbfff
[ 0.470685] pci 0000:00:1c.1: MEM window: 0xf6000000-0xf7ffffff
[ 0.470689] pci 0000:00:1c.1: PREFETCH window: 0x000000f2000000-0x000000f3ffffff
[ 0.470697] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 0.470700] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
[ 0.470705] pci 0000:00:1c.5: MEM window: 0xf8000000-0xf80fffff
[ 0.470709] pci 0000:00:1c.5: PREFETCH window: 0x000000c2000000-0x000000c20fffff
[ 0.470717] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09
[ 0.470718] pci 0000:00:1e.0: IO window: disabled
[ 0.470724] pci 0000:00:1e.0: MEM window: 0xf8100000-0xf81fffff
[ 0.470728] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.470740] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.470743] pci 0000:00:01.0: setting latency timer to 64
[ 0.470751] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.470755] pci 0000:00:1c.0: setting latency timer to 64
[ 0.470763] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.470766] pci 0000:00:1c.1: setting latency timer to 64
[ 0.470773] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.470778] pci 0000:00:1c.5: setting latency timer to 64
[ 0.470785] pci 0000:00:1e.0: setting latency timer to 64
[ 0.470788] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.470790] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.470791] bus: 01 index 0 io port: [0x2000-0x2fff]
[ 0.470793] bus: 01 index 1 mmio: [0xcc000000-0xceffffff]
[ 0.470795] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.470796] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.470798] bus: 02 index 0 io port: [0x4000-0x7fff]
[ 0.470799] bus: 02 index 1 mmio: [0xf4000000-0xf5ffffff]
[ 0.470801] bus: 02 index 2 mmio: [0xf0000000-0xf1ffffff]
[ 0.470802] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.470803] bus: 04 index 0 io port: [0x8000-0xbfff]
[ 0.470805] bus: 04 index 1 mmio: [0xf6000000-0xf7ffffff]
[ 0.470807] bus: 04 index 2 mmio: [0xf2000000-0xf3ffffff]
[ 0.470808] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.470809] bus: 08 index 0 io port: [0xc000-0xcfff]
[ 0.470811] bus: 08 index 1 mmio: [0xf8000000-0xf80fffff]
[ 0.470812] bus: 08 index 2 mmio: [0xc2000000-0xc20fffff]
[ 0.470814] bus: 08 index 3 mmio: [0x0-0x0]
[ 0.470815] bus: 09 index 0 mmio: [0x0-0x0]
[ 0.470817] bus: 09 index 1 mmio: [0xf8100000-0xf81fffff]
[ 0.470818] bus: 09 index 2 mmio: [0x0-0x0]
[ 0.470820] bus: 09 index 3 io port: [0x00-0xffff]
[ 0.470821] bus: 09 index 4 mmio: [0x000000-0xffffffff]
[ 0.470827] NET: Registered protocol family 2
[ 0.484031] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.484206] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.484469] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.484597] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.484599] TCP reno registered
[ 0.488035] NET: Registered protocol family 1
[ 0.488116] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.503992] Switched to high resolution mode on CPU 0
[ 0.720282] it is
[ 0.972072] Freeing initrd memory: 7366k freed
[ 0.972108] Simple Boot Flag at 0x35 set to 0x1
[ 0.972254] cpufreq: No nForce2 chipset.
[ 0.972368] audit: initializing netlink socket (disabled)
[ 0.972390] type=2000 audit(1241888044.969:1): initialized
[ 0.978232] highmem bounce pool size: 64 pages
[ 0.978236] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.979248] VFS: Disk quotas dquot_6.5.1
[ 0.979293] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.979760] fuse init (API version 7.10)
[ 0.979825] msgmni has been set to 1672
[ 0.979961] alg: No test for stdrng (krng)
[ 0.979969] io scheduler noop registered
[ 0.979971] io scheduler anticipatory registered
[ 0.979973] io scheduler deadline registered
[ 0.979983] io scheduler cfq registered (default)
[ 0.980136] pci 0000:01:00.0: Boot video device
[ 0.985173] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.985204] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.985225] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.985233] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.985244] pci_express 0000:00:01.0:pcie02: allocate port service
[ 0.985253] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.985296] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.985343] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.985375] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.985390] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.985399] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.985408] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.985477] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.985524] pcieport-driver 0000:00:1c.1: found MSI capability
[ 0.985556] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[ 0.985572] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 0.985581] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 0.985590] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 0.985659] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.985706] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.985738] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 0.985753] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.985762] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.985774] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.985849] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.986122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.987533] ACPI: AC Adapter [ACAD] (on-line)
[ 1.086810] ACPI: Battery Slot [BAT0] (battery present)
[ 1.086877] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.086879] ACPI: Power Button (FF) [PWRF]
[ 1.086910] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.086919] ACPI: Power Button (CM) [PWRB]
[ 1.086950] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.086952] ACPI: Sleep Button (CM) [SLPB]
[ 1.086986] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 1.089658] ACPI: Lid Switch [LID]
[ 1.090093] ACPI: SSDT BFED69DB, 02BC (r1 HP 30CB 3000 INTL 20061109)
[ 1.090409] ACPI: SSDT BFED637E, 05D8 (r1 HP 30CB 3001 INTL 20061109)
[ 1.092159] Monitor-Mwait will be used to enter C-1 state
[ 1.092161] Monitor-Mwait will be used to enter C-2 state
[ 1.092164] Monitor-Mwait will be used to enter C-3 state
[ 1.092175] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.092193] processor ACPI_CPU:00: registered as cooling_device0
[ 1.092196] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.092472] ACPI: SSDT BFED6C97, 00C8 (r1 HP 30CB 3000 INTL 20061109)
[ 1.092745] ACPI: SSDT BFED6956, 0085 (r1 HP 30CB 3000 INTL 20061109)
[ 1.093494] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.093508] processor ACPI_CPU:01: registered as cooling_device1
[ 1.093511] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.100198] ACPI Exception (thermal-0377): AE_OK, No or invalid critical threshold [20080926]
[ 1.100243] isapnp: Scanning for PnP cards...
[ 1.454266] isapnp: No Plug & Play device found
[ 1.467001] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.467804] brd: module loaded
[ 1.468051] loop: module loaded
[ 1.468099] Fixed MDIO Bus: probed
[ 1.468103] PPP generic driver version 2.4.2
[ 1.468148] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.468172] Driver 'sd' needs updating - please use bus_type methods
[ 1.468179] Driver 'sr' needs updating - please use bus_type methods
[ 1.468209] ahci 0000:00:1f.2: version 3.0
[ 1.468223] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.468255] ahci 0000:00:1f.2: irq 2299 for MSI/MSI-X
[ 1.468326] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.468329] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.468333] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.468590] scsi0 : ahci
[ 1.468650] scsi1 : ahci
[ 1.468696] scsi2 : ahci
[ 1.468764] ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 2299
[ 1.468767] ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 2299
[ 1.468770] ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 2299
[ 1.788020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.788926] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.788930] ata1.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 1.788932] ata1.00: 488397168 sectors, multi 16: LBA48
[ 1.790016] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 1.790037] ata1.00: configured for UDMA/100
[ 2.124016] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.864017] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.864916] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.864919] ata3.00: ATA-8: Hitachi HTS542525K9SA00, BBFOC32P, max UDMA/100
[ 2.864920] ata3.00: 488397168 sectors, multi 16: LBA48
[ 2.865995] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.866015] ata3.00: configured for UDMA/100
[ 2.880092] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 2.880163] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.880176] sd 0:0:0:0: [sda] Write Protect is off
[ 2.880178] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.880197] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.880241] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.880252] sd 0:0:0:0: [sda] Write Protect is off
[ 2.880254] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.880272] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.880275] sda: sda1 sda2 sda3
[ 2.897445] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.897479] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.897535] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54252 BBFO PQ: 0 ANSI: 5
[ 2.897595] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.897606] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.897608] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.897626] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.897661] sd 2:0:0:0: [sdb] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[ 2.897672] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.897674] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.897692] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.897695] sdb: sdb1 sdb2 sdb3
[ 2.944903] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.944928] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.944965] ata_piix 0000:00:1f.1: version 2.12
[ 2.944970] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.945000] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.945062] scsi3 : ata_piix
[ 2.945108] scsi4 : ata_piix
[ 2.945600] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 2.945602] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 3.108474] ata4.00: ATAPI: MATSHITABD-CMB UJ-120, 1.01, max MWDMA2
[ 3.124428] ata4.00: configured for MWDMA2
[ 3.293105] scsi 3:0:0:0: CD-ROM MATSHITA BD-CMB UJ-120 1.01 PQ: 0 ANSI: 5
[ 3.298958] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.298961] Uniform CD-ROM driver Revision: 3.20
[ 3.299024] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.299052] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 3.299563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.299579] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.299588] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.299591] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.299637] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.303536] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.303542] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.303553] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
[ 3.316008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.316065] usb usb1: configuration #1 chosen from 1 choice
[ 3.316089] hub 1-0:1.0: USB hub found
[ 3.316095] hub 1-0:1.0: 4 ports detected
[ 3.316174] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.316183] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.316186] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.316216] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.320110] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.320117] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.320127] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
[ 3.336007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.336059] usb usb2: configuration #1 chosen from 1 choice
[ 3.336077] hub 2-0:1.0: USB hub found
[ 3.336083] hub 2-0:1.0: 6 ports detected
[ 3.336163] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.336176] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.336190] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.336195] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.336198] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.336228] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.336260] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 3.336318] usb usb3: configuration #1 chosen from 1 choice
[ 3.336339] hub 3-0:1.0: USB hub found
[ 3.336347] hub 3-0:1.0: 2 ports detected
[ 3.336411] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.336417] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.336420] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.336449] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.336483] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 3.336542] usb usb4: configuration #1 chosen from 1 choice
[ 3.336564] hub 4-0:1.0: USB hub found
[ 3.336569] hub 4-0:1.0: 2 ports detected
[ 3.336631] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.336637] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.336640] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.336675] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 3.336699] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 3.336756] usb usb5: configuration #1 chosen from 1 choice
[ 3.336773] hub 5-0:1.0: USB hub found
[ 3.336779] hub 5-0:1.0: 2 ports detected
[ 3.336845] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.336850] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.336853] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.336882] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 3.336912] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 3.336971] usb usb6: configuration #1 chosen from 1 choice
[ 3.336993] hub 6-0:1.0: USB hub found
[ 3.336998] hub 6-0:1.0: 2 ports detected
[ 3.337061] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.337067] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.337070] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.337099] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.337123] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 3.337182] usb usb7: configuration #1 chosen from 1 choice
[ 3.337200] hub 7-0:1.0: USB hub found
[ 3.337205] hub 7-0:1.0: 2 ports detected
[ 3.337300] usbcore: registered new interface driver libusual
[ 3.337321] usbcore: registered new interface driver usbserial
[ 3.337329] USB Serial support registered for generic
[ 3.337341] usbcore: registered new interface driver usbserial_generic
[ 3.337343] usbserial: USB Serial Driver core
[ 3.337379] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.379356] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.379360] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.380029] mice: PS/2 mouse device common for all mice
[ 3.400056] rtc_cmos 00:08: RTC can wake from S4
[ 3.400078] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 3.400107] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.400149] device-mapper: uevent: version 1.0.3
[ 3.400215] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.400268] device-mapper: multipath: version 1.0.5 loaded
[ 3.400270] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.400324] EISA: Probing bus 0 at eisa.0
[ 3.400329] Cannot allocate resource for EISA slot 1
[ 3.400331] Cannot allocate resource for EISA slot 2
[ 3.400337] Cannot allocate resource for EISA slot 4
[ 3.400338] Cannot allocate resource for EISA slot 5
[ 3.400340] Cannot allocate resource for EISA slot 6
[ 3.400341] Cannot allocate resource for EISA slot 7
[ 3.400343] Cannot allocate resource for EISA slot 8
[ 3.400344] EISA: Detected 0 cards.
[ 3.400428] cpuidle: using governor ladder
[ 3.400514] cpuidle: using governor menu
[ 3.400889] TCP cubic registered
[ 3.400967] NET: Registered protocol family 10
[ 3.401287] lo: Disabled Privacy Extensions
[ 3.401536] NET: Registered protocol family 17
[ 3.401549] Bluetooth: L2CAP ver 2.11
[ 3.401550] Bluetooth: L2CAP socket layer initialized
[ 3.401552] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.401554] Bluetooth: SCO socket layer initialized
[ 3.401578] Bluetooth: RFCOMM socket layer initialized
[ 3.401580] Marking TSC unstable due to TSC halts in idle
[ 3.401586] Bluetooth: RFCOMM TTY layer initialized
[ 3.401587] Bluetooth: RFCOMM ver 1.10
[ 3.402102] Using IPI No-Shortcut mode
[ 3.402146] registered taskstats version 1
[ 3.402238] Magic number: 9:257:944
[ 3.402248] tty tty1: hash matches
[ 3.402296] rtc_cmos 00:08: setting system clock to 2009-05-09 16:54:08 UTC (1241888048)
[ 3.402299] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.402300] EDD information not available.
[ 3.402554] Freeing unused kernel memory: 532k freed
[ 3.402647] Write protecting the kernel text: 4128k
[ 3.402682] Write protecting the kernel read-only data: 1532k
[ 3.440234] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 3.592971] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.592993] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.593015] r8169 0000:08:00.0: setting latency timer to 64
[ 3.593171] r8169 0000:08:00.0: irq 2298 for MSI/MSI-X
[ 3.593712] eth0: RTL8168b/8111b at 0xf7c74000, 00:1e:68:72:33:2b, XID 38000000 IRQ 2298
[ 3.715297] ohci1394 0000:09:09.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 3.766034] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[f8100000-f81007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 3.809101] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 4.043837] usb 2-4: configuration #1 chosen from 1 choice
[ 4.266125] PM: Starting manual resume from disk
[ 4.266128] PM: Resume from partition 8:19
[ 4.266129] PM: Checking hibernation image.
[ 4.266254] PM: Resume from disk failed.
[ 4.294414] EXT4-fs: barriers enabled
[ 4.313938] kjournald2 starting. Commit interval 5 seconds
[ 4.313986] EXT4-fs: delayed allocation enabled
[ 4.313988] EXT4-fs: file extents enabled
[ 4.319572] EXT4-fs: mballoc enabled
[ 4.319575] EXT4-fs: mounted filesystem with ordered data mode.
[ 4.380067] usb 4-1: new low speed USB device using uhci_hcd and address 2
[ 4.554628] usb 4-1: configuration #1 chosen from 1 choice
[ 4.796042] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 4.979838] usb 5-1: configuration #1 chosen from 1 choice
[ 5.040506] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b006644fb00]
[ 8.387194] udev: starting version 141
[ 8.482770] usbcore: registered new interface driver hiddev
[ 8.499370] Linux agpgart interface v0.103
[ 8.499685] input: AverMedia IR USB K/B2 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input6
[ 8.528121] generic-usb 0003:0471:204D.0001: input,hidraw0: USB HID v1.10 Keyboard [AverMedia IR USB K/B2] on usb-0000:00:1a.1-1/input0
[ 8.559225] input: Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input7
[ 8.584093] generic-usb 0003:045E:00D2.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Optical Mouse with Tilt Wheel] on usb-0000:00:1d.0-1/input0
[ 8.584113] usbcore: registered new interface driver usbhid
[ 8.584116] usbhid: v2.6:USB HID core driver
[ 8.683716] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.690723] Linux video capture interface: v2.00
[ 8.894488] nvidia: module license 'NVIDIA' taints kernel.
[ 9.146392] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 9.146402] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.146409] nvidia 0000:01:00.0: setting latency timer to 64
[ 9.147190] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.379795] ieee80211_crypt: registered algorithm 'NULL'
[ 9.383410] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9.383423] wl 0000:02:00.0: setting latency timer to 64
[ 9.490071] iTCO_vendor_support: vendor-support=0
[ 9.582887] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 9.583003] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 9.583082] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.640175] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0)
[ 9.641763] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input9
[ 9.644178] usbcore: registered new interface driver uvcvideo
[ 9.644219] USB Video Class driver (v0.1.0)
[ 9.668179] sdhci: Secure Digital Host Controller Interface driver
[ 9.668181] sdhci: Copyright(c) Pierre Ossman
[ 9.669359] sdhci-pci 0000:09:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 9.669373] sdhci-pci 0000:09:09.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 9.671454] mmc0: SDHCI controller on PCI [0000:09:09.1] using PIO
[ 9.672095] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 9.672097] ricoh-mmc: Copyright(c) Philip Langdale
[ 9.672110] ricoh-mmc: Ricoh MMC controller found at 0000:09:09.2 [1180:0843] (rev 12)
[ 9.672125] ricoh-mmc: Controller is now disabled.
[ 9.688495] acpi device:06: registered as cooling_device2
[ 9.688677] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input10
[ 9.691611] ieee80211_crypt: registered algorithm 'TKIP'
[ 9.692092] eth1: Broadcom BCM4315 802.11 Wireless Controller 5.10.79.10
[ 9.715226] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 9.853343] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.853435] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.938963] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 10.075413] lp: driver loaded but no devices found
[ 10.126711] Adding 9815704k swap on /dev/sdb3. Priority:-1 extents:1 across:9815704k
[ 10.653760] EXT4 FS on sdb1, internal journal on sdb1:8
[ 11.153753] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 11.264580] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 11.667913] type=1505 audit(1241877256.761:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2199
[ 11.699321] type=1505 audit(1241877256.793:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2203
[ 11.699378] type=1505 audit(1241877256.793:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2203
[ 11.699408] type=1505 audit(1241877256.793:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2203
[ 11.699435] type=1505 audit(1241877256.793:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2203
[ 11.786618] type=1505 audit(1241877256.881:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2208
[ 11.786709] type=1505 audit(1241877256.881:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2208
[ 11.805579] type=1505 audit(1241877256.901:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2212
[ 13.589123] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.589125] Bluetooth: BNEP filters: protocol multicast
[ 13.617139] Bridge firewalling registered
[ 15.280263] ppdev: user-space parallel port driver
[ 18.901768] r8169: eth0: link up
[ 18.901774] r8169: eth0: link up
[ 24.052050] eth1: no IPv6 routers present
[ 29.669013] eth0: no IPv6 routers present


[logari81]

απότι βλεπω εχεις και webcam πανω. Αν μπορεις βγαλτην, ξαναμπουταρε και ξαναδοκίμασε.

[cv19985]

Ειναι λαπτοπ με ενσωματομενη webcam. Δεν γινεται να την βγαλω... Υπαρχει καποιος αλλος τροπος/?