KWORLD usb2.0

[dio]

Για ενα KWORLD usb2.0 http://us.kworld-global.com/main/prod_i ... prodid=104 για Captures video from VHS, V8, Hi8, etc που έχω επάνω, κάποια βοήθεια;

Κώδικας: Επιλογή όλων

:~$ lsusb
Bus 004 Device 002: ID eb1a:2820 eMPIA Technology, Inc.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 014 Device 002: ID 046d:08ad Logitech, Inc. QuickCam Communicate STX
Bus 014 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 011 Device 002: ID 03f0:7204 Hewlett-Packard DeskJet 36xx
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05e3:0710 Genesys Logic, Inc. USB 2.0 33-in-1 Card Reader
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 002: ID 046d:c408 Logitech, Inc. Marble Mouse (4-button)
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 003: ID 041e:4052 Creative Technology, Ltd Live! Cam Vista IM
Bus 005 Device 002: ID 056a:0064 Wacom Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

[logari81]

βάλε μια κασετα να παιζει και βάλε το πρόγραμμα tvtime για να δεις αν παίρνει το σήμα. Απότι βλέπω στο google πρεπει να δουλευει.

Bus 004 Device 002: ID eb1a:2820 eMPIA Technology, Inc.

Αν δεν καταφερεις να δεις εικόνα ποσταρε το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

λιγα δευτερόλεπτα μετά την σύνδεση της συσκευής

[dio]

Απο το tvtime: No video source, No signal, Frames too short from ov519 Cannot open capture device/dev/video0.
Από το chese: PointNix Intra-Oral Camera (/dev/video2) μαυρη οθόνη.
Απο το skype: με εντολή

Κώδικας: Επιλογή όλων

LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype

(μόνο ετσι εχω καταφέρει να βλεπει καμερες- Logitech, Inc. QuickCam Communicate STX και Creative Technology, Ltd Live! Cam Vista IM), PointNix Intra-Oral Camera (/dev/video2) μαυρη οθόνη. Έχε υπ' όψιν οτι υπάρχει και πρόβλημα με την καρτα γραφικών viewtopic.php?f=37&t=4612#p44201 δεν ξέρω αν παίζει ρόλο.
dmesg

Κώδικας: Επιλογή όλων

[ 1.041562] io scheduler deadline registered
[ 1.041572] io scheduler cfq registered (default)
[ 1.041692] pci 0000:01:00.0: Boot video device
[ 1.043711] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.043738] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.043756] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.043763] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.043777] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.043814] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.043842] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.043861] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.043870] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.043880] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.043890] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.043934] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.043962] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.043982] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 1.043991] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.044001] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.044012] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.044057] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.044085] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.044104] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 1.044113] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.044122] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.044132] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.044187] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.044549] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.044664] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.044666] ACPI: Power Button (FF) [PWRF]
[ 1.044707] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.044709] ACPI: Power Button (CM) [PWRB]
[ 1.045117] ACPI: SSDT 7FF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
[ 1.045385] processor ACPI_CPU:00: registered as cooling_device0
[ 1.045604] ACPI: SSDT 7FF8E2B0, 0143 (r1 AMI CPU2PM 1 INTL 20060113)
[ 1.045855] processor ACPI_CPU:01: registered as cooling_device1
[ 1.047890] isapnp: Scanning for PnP cards...
[ 1.400662] isapnp: No Plug & Play device found
[ 1.408698] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.408786] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.409137] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.409756] brd: module loaded
[ 1.409998] loop: module loaded
[ 1.410049] Fixed MDIO Bus: probed
[ 1.410052] PPP generic driver version 2.4.2
[ 1.410094] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.410118] Driver 'sd' needs updating - please use bus_type methods
[ 1.410125] Driver 'sr' needs updating - please use bus_type methods
[ 1.410159] ahci 0000:03:00.0: version 3.0
[ 1.410193] ata_piix 0000:00:1f.2: version 2.12
[ 1.410203] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 1.410206] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.410238] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.410282] scsi0 : ata_piix
[ 1.410344] scsi1 : ata_piix
[ 1.411411] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
[ 1.411414] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
[ 1.884040] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.901634] ata1.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 1.901636] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.908405] ata1.00: configured for UDMA/133
[ 2.384040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.419474] ata2.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 2.419476] ata2.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.424888] ata2.00: configured for UDMA/133
[ 2.424977] scsi 0:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 2.425067] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.425080] sd 0:0:0:0: [sda] Write Protect is off
[ 2.425082] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.425101] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.425148] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.425160] sd 0:0:0:0: [sda] Write Protect is off
[ 2.425162] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.425181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.425184] sda: sda1 sda2 < sda5 >
[ 2.453556] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.453593] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.453657] scsi 1:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 2.453721] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.453733] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.453735] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.453754] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.453798] sd 1:0:0:0: [sdb] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 2.453810] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.453812] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.453831] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.453834] sdb: sdb1
[ 2.461079] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.461112] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.461128] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 2.461131] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.461164] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.461201] scsi2 : ata_piix
[ 2.461247] scsi3 : ata_piix
[ 2.462223] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 2.462226] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 2.936047] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.953659] ata3.00: ATA-7: WDC WD1600AAJS-22PSA0, 05.06H05, max UDMA/133
[ 2.953662] ata3.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.968560] ata3.00: configured for UDMA/133
[ 3.298565] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.298630] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AAJS-2 05.0 PQ: 0 ANSI: 5
[ 3.298695] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.298707] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.298708] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.298728] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.298770] sd 2:0:0:0: [sdc] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 3.298781] sd 2:0:0:0: [sdc] Write Protect is off
[ 3.298783] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.298803] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.298806] sdc: sdc1
[ 3.303578] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 3.303612] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.303993] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.304022] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 3.304063] scsi4 : pata_marvell
[ 3.304107] scsi5 : pata_marvell
[ 3.304135] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
[ 3.304137] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
[ 3.476415] ata5.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[ 3.476446] ata5.01: ATAPI: HL-DT-ST DVD-ROM GDR-H30N, 1.00, max UDMA/33
[ 3.492437] ata5.00: configured for UDMA/66
[ 3.508392] ata5.01: configured for UDMA/33
[ 3.676166] scsi 4:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
[ 3.679506] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.679509] Uniform CD-ROM driver Revision: 3.20
[ 3.679588] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.679621] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 3.680160] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR-H30N 1.00 PQ: 0 ANSI: 5
[ 3.683859] sr1: scsi3-mmc drive: 4x/52x cd/rw xa/form2 cdda tray
[ 3.683915] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 3.683951] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 3.684177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.684191] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.684205] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 3.684208] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 3.684251] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 3.688144] ehci_hcd 0000:00:1a.7: debug port 1
[ 3.688149] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 3.688159] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 3.700022] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.700087] usb usb1: configuration #1 chosen from 1 choice
[ 3.700112] hub 1-0:1.0: USB hub found
[ 3.700118] hub 1-0:1.0: 6 ports detected
[ 3.700217] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.700225] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.700228] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.700263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 3.704167] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.704172] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.704182] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 3.716023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.716072] usb usb2: configuration #1 chosen from 1 choice
[ 3.716098] hub 2-0:1.0: USB hub found
[ 3.716103] hub 2-0:1.0: 6 ports detected
[ 3.716191] ehci_hcd 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.716205] ehci_hcd 0000:05:00.2: EHCI Host Controller
[ 3.716236] ehci_hcd 0000:05:00.2: new USB bus registered, assigned bus number 3
[ 3.716261] ehci_hcd 0000:05:00.2: irq 18, io mem 0xfebff400
[ 3.728013] ehci_hcd 0000:05:00.2: USB 2.0 started, EHCI 1.00
[ 3.728067] usb usb3: configuration #1 chosen from 1 choice
[ 3.728090] hub 3-0:1.0: USB hub found
[ 3.728096] hub 3-0:1.0: 4 ports detected
[ 3.728171] ehci_hcd 0000:05:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 3.728180] ehci_hcd 0000:05:01.2: EHCI Host Controller
[ 3.728220] ehci_hcd 0000:05:01.2: new USB bus registered, assigned bus number 4
[ 3.728250] ehci_hcd 0000:05:01.2: irq 19, io mem 0xfebff000
[ 3.740013] ehci_hcd 0000:05:01.2: USB 2.0 started, EHCI 1.00
[ 3.740060] usb usb4: configuration #1 chosen from 1 choice
[ 3.740083] hub 4-0:1.0: USB hub found
[ 3.740088] hub 4-0:1.0: 4 ports detected
[ 3.740166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.740182] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.740202] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.740206] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 3.740209] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.740242] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 3.740260] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 3.740316] usb usb5: configuration #1 chosen from 1 choice
[ 3.740335] hub 5-0:1.0: USB hub found
[ 3.740340] hub 5-0:1.0: 2 ports detected
[ 3.740403] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 3.740407] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 3.740410] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.740443] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 6
[ 3.740467] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 3.740526] usb usb6: configuration #1 chosen from 1 choice
[ 3.740546] hub 6-0:1.0: USB hub found
[ 3.740550] hub 6-0:1.0: 2 ports detected
[ 3.740615] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.740619] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 3.740622] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.740661] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 7
[ 3.740680] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 3.740733] usb usb7: configuration #1 chosen from 1 choice
[ 3.740752] hub 7-0:1.0: USB hub found
[ 3.740757] hub 7-0:1.0: 2 ports detected
[ 3.740821] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.740825] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.740828] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.740859] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 8
[ 3.740878] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 3.740933] usb usb8: configuration #1 chosen from 1 choice
[ 3.740953] hub 8-0:1.0: USB hub found
[ 3.740959] hub 8-0:1.0: 2 ports detected
[ 3.741021] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.741026] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.741028] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.741063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 9
[ 3.741081] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 3.741135] usb usb9: configuration #1 chosen from 1 choice
[ 3.741154] hub 9-0:1.0: USB hub found
[ 3.741159] hub 9-0:1.0: 2 ports detected
[ 3.741223] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.741227] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.741230] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.741261] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 10
[ 3.741280] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 3.741334] usb usb10: configuration #1 chosen from 1 choice
[ 3.741356] hub 10-0:1.0: USB hub found
[ 3.741364] hub 10-0:1.0: 2 ports detected
[ 3.741435] uhci_hcd 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.741440] uhci_hcd 0000:05:00.0: UHCI Host Controller
[ 3.741478] uhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 11
[ 3.741496] uhci_hcd 0000:05:00.0: irq 16, io base 0x0000e800
[ 3.741558] usb usb11: configuration #1 chosen from 1 choice
[ 3.741578] hub 11-0:1.0: USB hub found
[ 3.741582] hub 11-0:1.0: 2 ports detected
[ 3.741647] uhci_hcd 0000:05:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.741652] uhci_hcd 0000:05:00.1: UHCI Host Controller
[ 3.741686] uhci_hcd 0000:05:00.1: new USB bus registered, assigned bus number 12
[ 3.741711] uhci_hcd 0000:05:00.1: irq 17, io base 0x0000e880
[ 3.741765] usb usb12: configuration #1 chosen from 1 choice
[ 3.741784] hub 12-0:1.0: USB hub found
[ 3.741789] hub 12-0:1.0: 2 ports detected
[ 3.741856] uhci_hcd 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.741861] uhci_hcd 0000:05:01.0: UHCI Host Controller
[ 3.741895] uhci_hcd 0000:05:01.0: new USB bus registered, assigned bus number 13
[ 3.741914] uhci_hcd 0000:05:01.0: irq 17, io base 0x0000e400
[ 3.741967] usb usb13: configuration #1 chosen from 1 choice
[ 3.741989] hub 13-0:1.0: USB hub found
[ 3.741994] hub 13-0:1.0: 2 ports detected
[ 3.742061] uhci_hcd 0000:05:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 3.742066] uhci_hcd 0000:05:01.1: UHCI Host Controller
[ 3.742101] uhci_hcd 0000:05:01.1: new USB bus registered, assigned bus number 14
[ 3.742120] uhci_hcd 0000:05:01.1: irq 18, io base 0x0000e480
[ 3.742176] usb usb14: configuration #1 chosen from 1 choice
[ 3.742196] hub 14-0:1.0: USB hub found
[ 3.742200] hub 14-0:1.0: 2 ports detected
[ 3.742314] usbcore: registered new interface driver libusual
[ 3.742340] usbcore: registered new interface driver usbserial
[ 3.742348] USB Serial support registered for generic
[ 3.742364] usbcore: registered new interface driver usbserial_generic
[ 3.742365] usbserial: USB Serial Driver core
[ 3.742404] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.742406] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.742889] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.744553] mice: PS/2 mouse device common for all mice
[ 3.756576] rtc_cmos 00:03: RTC can wake from S4
[ 3.756605] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 3.756626] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.756683] device-mapper: uevent: version 1.0.3
[ 3.756752] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.756808] device-mapper: multipath: version 1.0.5 loaded
[ 3.756810] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.756867] EISA: Probing bus 0 at eisa.0
[ 3.756890] EISA: Detected 0 cards.
[ 3.756924] cpuidle: using governor ladder
[ 3.756926] cpuidle: using governor menu
[ 3.757325] TCP cubic registered
[ 3.757400] NET: Registered protocol family 10
[ 3.757740] lo: Disabled Privacy Extensions
[ 3.758001] NET: Registered protocol family 17
[ 3.758016] Bluetooth: L2CAP ver 2.11
[ 3.758017] Bluetooth: L2CAP socket layer initialized
[ 3.758020] Bluetooth: SCO (Voice Link) ver 0.6
[ 3.758021] Bluetooth: SCO socket layer initialized
[ 3.758040] Bluetooth: RFCOMM socket layer initialized
[ 3.758044] Bluetooth: RFCOMM TTY layer initialized
[ 3.758046] Bluetooth: RFCOMM ver 1.10
[ 3.758453] Using IPI No-Shortcut mode
[ 3.758505] registered taskstats version 1
[ 3.758622] Magic number: 5:299:560
[ 3.758670] rtc_cmos 00:03: setting system clock to 2009-04-29 01:34:24 UTC (1240968864)
[ 3.758673] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.758674] EDD information not available.
[ 3.758844] Freeing unused kernel memory: 532k freed
[ 3.758942] Write protecting the kernel text: 4128k
[ 3.758977] Write protecting the kernel read-only data: 1532k
[ 3.779274] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 3.917159] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.917169] atl1 0000:02:00.0: setting latency timer to 64
[ 3.917196] atl1 0000:02:00.0: version 2.1.3
[ 3.957097] Floppy drive(s): fd0 is 1.44M
[ 3.981697] ohci1394 0000:05:00.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.034395] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 4.042177] FDC 0 is a post-1991 82077
[ 4.264034] usb 2-3: new high speed USB device using ehci_hcd and address 2
[ 4.314037] PM: Starting manual resume from disk
[ 4.314040] PM: Resume from partition 8:5
[ 4.314041] PM: Checking hibernation image.
[ 4.314203] PM: Resume from disk failed.
[ 4.355304] kjournald starting. Commit interval 5 seconds
[ 4.355313] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.400664] usb 2-3: configuration #1 chosen from 1 choice
[ 4.404173] Initializing USB Mass Storage driver...
[ 4.404264] scsi6 : SCSI emulation for USB Mass Storage devices
[ 4.404325] usbcore: registered new interface driver usb-storage
[ 4.404328] USB Mass Storage support registered.
[ 4.404384] usb-storage: device found at 2
[ 4.404385] usb-storage: waiting for device to settle before scanning
[ 4.736023] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 4.868377] usb 4-2: configuration #1 chosen from 1 choice
[ 5.220522] usb 5-1: new low speed USB device using uhci_hcd and address 2
[ 5.320104] ieee1394: Host added: ID:BUS[0-00:1023] GUID[20000000030008a6]
[ 5.392336] usb 5-1: configuration #1 chosen from 1 choice
[ 5.632020] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 5.818323] usb 5-2: configuration #1 chosen from 1 choice
[ 6.060029] usb 7-1: new low speed USB device using uhci_hcd and address 2
[ 6.234741] usb 7-1: configuration #1 chosen from 1 choice
[ 6.476025] usb 11-1: new full speed USB device using uhci_hcd and address 2
[ 6.660630] usb 11-1: configuration #1 chosen from 1 choice
[ 6.900040] usb 11-2: new full speed USB device using uhci_hcd and address 3
[ 7.058636] usb 11-2: configuration #1 chosen from 1 choice
[ 7.300039] usb 14-2: new full speed USB device using uhci_hcd and address 2
[ 7.487288] usb 14-2: configuration #1 chosen from 1 choice
[ 8.386502] udev: starting version 141
[ 8.466638] input: Wacom PenPartner2 as /devices/pci0000:00/0000:00:1a.0/usb5/5-1/5-1:1.0/input/input4
[ 8.499295] Linux video capture interface: v2.00
[ 8.536373] usbcore: registered new interface driver wacom
[ 8.536396] wacom: v1.49:USB Wacom Graphire and Wacom Intuos tablet driver
[ 8.547396] gspca: main v2.3.0 registered
[ 8.548464] gspca: probing 041e:4052
[ 8.571665] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 8.614190] Linux agpgart interface v0.103
[ 8.662810] iTCO_vendor_support: vendor-support=0
[ 8.664628] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 8.664796] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[ 8.664846] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.736294] ov519: I2C synced in 1 attempt(s)
[ 8.736297] ov519: starting OV7xx0 configuration
[ 8.748253] ov519: Sensor is an OV7670
[ 8.946839] usbcore: registered new interface driver hiddev
[ 8.961942] input: Logitech USB Trackball as /devices/pci0000:00/0000:00:1a.2/usb7/7-1/7-1:1.0/input/input6
[ 8.964140] generic-usb 0003:046D:C408.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1a.2-1/input0
[ 8.964163] usbcore: registered new interface driver usbhid
[ 8.964183] usbhid: v2.6:USB HID core driver
[ 9.070463] gspca: probing 046d:08ad
[ 9.081732] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7204
[ 9.081752] usbcore: registered new interface driver usblp
[ 9.121168] USB Serial support registered for pl2303
[ 9.121211] pl2303 11-2:1.0: pl2303 converter detected
[ 9.132746] usb 11-2: pl2303 converter now attached to ttyUSB0
[ 9.132766] usbcore: registered new interface driver pl2303
[ 9.132768] pl2303: Prolific PL2303 USB to serial adaptor driver
[ 9.336654] em28xx v4l2 driver version 0.1.0 loaded
[ 9.336683] em28xx new video device (eb1a:2820): interface 0, class 255
[ 9.336687] em28xx Doesn't have usb audio class
[ 9.336689] em28xx #0: Alternate settings: 8
[ 9.336690] em28xx #0: Alternate setting 0, max size= 0
[ 9.336692] em28xx #0: Alternate setting 1, max size= 1024
[ 9.336694] em28xx #0: Alternate setting 2, max size= 1448
[ 9.336695] em28xx #0: Alternate setting 3, max size= 2048
[ 9.336697] em28xx #0: Alternate setting 4, max size= 2304
[ 9.336699] em28xx #0: Alternate setting 5, max size= 2580
[ 9.336700] em28xx #0: Alternate setting 6, max size= 2892
[ 9.336702] em28xx #0: Alternate setting 7, max size= 3072
[ 9.337007] em28xx #0: em28xx chip ID = 18
[ 9.397742] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.397815] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.405210] usb-storage: device scan complete
[ 9.407858] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.409085] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.410333] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.411582] scsi 6:0:0:3: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
[ 9.413193] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 9.413298] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 9.417792] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 9.417886] sd 6:0:0:1: Attached scsi generic sg6 type 0
[ 9.419666] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 9.419744] sd 6:0:0:2: Attached scsi generic sg7 type 0
[ 9.421542] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 9.421633] sd 6:0:0:3: Attached scsi generic sg8 type 0
[ 9.430428] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 9.463785] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.463831] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.564542] em28xx #0: board has no eeprom
[ 9.578418] em28xx #0: found i2c device @ 0x4a [saa7113h]
[ 9.610176] em28xx #0: Your board has no unique USB ID.
[ 9.610179] em28xx #0: A hint were successfully done, based on i2c devicelist hash.
[ 9.610181] em28xx #0: This method is not 100% failproof.
[ 9.610183] em28xx #0: If the board were missdetected, please email this log to:
[ 9.610185] em28xx #0: V4L Mailing List <video4linux-list@redhat.com>
[ 9.610187] em28xx #0: Board detected as PointNix Intra-Oral Camera
[ 9.610190] em28xx #0: Registering snapshot button...
[ 9.610276] input: em28xx snapshot button as /devices/pci0000:00/0000:00:1e.0/0000:05:01.2/usb4/4-2/input/input7
[ 9.996485] saa7115' 0-0025: saa7113 found (1f7113d0e100000) @ 0x4a (em28xx #0)
[ 10.230310] gspca: probe ok
[ 10.230332] usbcore: registered new interface driver ov519
[ 10.230354] ov519: registered
[ 10.703298] zc3xx: probe 2wr ov vga 0x0000
[ 10.747300] zc3xx: probe sensor -> 11
[ 10.747303] zc3xx: Find Sensor HV7131R(c)
[ 10.752363] gspca: probe ok
[ 10.774712] usbcore: registered new interface driver zc3xx
[ 10.774715] usbcore: registered new interface driver snd-usb-audio
[ 10.774718] zc3xx: registered
[ 11.276302] em28xx #0: V4L2 device registered as /dev/video2 and /dev/vbi0
[ 11.276305] em28xx #0: Found PointNix Intra-Oral Camera
[ 11.276330] usbcore: registered new interface driver em28xx
[ 11.282021] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 11.282023] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 11.282239] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 11.451889] lp: driver loaded but no devices found
[ 11.507289] Adding 6032368k swap on /dev/sda5. Priority:-1 extents:1 across:6032368k
[ 12.035335] EXT3 FS on sda1, internal journal
[ 13.034652] type=1505 audit(1240958073.773:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2474
[ 13.071725] type=1505 audit(1240958073.809:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2478
[ 13.071787] type=1505 audit(1240958073.809:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2478
[ 13.071818] type=1505 audit(1240958073.809:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2478
[ 13.071847] type=1505 audit(1240958073.809:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2478
[ 13.174737] type=1505 audit(1240958073.913:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2483
[ 13.174847] type=1505 audit(1240958073.913:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2483
[ 13.196825] type=1505 audit(1240958073.937:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2487
[ 19.626281] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.626283] Bluetooth: BNEP filters: protocol multicast
[ 19.667563] Bridge firewalling registered
[ 20.806834] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.924109] ppdev: user-space parallel port driver
[ 20.953738] [drm] Initialized drm 1.1.0 20060810
[ 21.003946] pci 0000:01:00.0: setting latency timer to 64
[ 21.004111] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 21.779657] [drm] Setting GART location based on new memory map
[ 21.795243] [drm] Loading RV630 CP Microcode
[ 21.795391] [drm] Loading RV630 PFP Microcode
[ 21.810302] [drm] Resetting GPU
[ 21.810358] [drm] writeback test succeeded in 1 usecs
[ 25.258320] atl1 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 25.258408] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 35.640015] eth0: no IPv6 routers present
[ 68.272183] zc3xx: probe 2wr ov vga 0x0000
[ 72.119341] zc3xx: probe 2wr ov vga 0x0000
[ 164.204649] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[ 193.575231] zc3xx: probe 2wr ov vga 0x0000


[logari81]

το tvtime προσπαθει να διαβάσει από το /dev/video0

Απο το tvtime: No video source, No signal, Frames too short from ov519 Cannot open capture device/dev/video0.

ενώ η συσκευή εχει δηλωθει στο /dev/video2

Κώδικας: Επιλογή όλων

[ 11.276302] em28xx #0: V4L2 device registered as /dev/video2 and /dev/vbi0

ή ρύθμισε το tvtime σωστα ή αποσύνδεσε τυχόν webcam που έχεις συνδέσει πάνω και πιθανον να καταλαμβάνουν τις θέσεις
/dev/video0, /dev/video1

πριν ρυθμισεις το tvtime μπορεις να τρεχεις κάθε φορά

Κώδικας: Επιλογή όλων

dmesg |grep /dev/video

για να παίρνεις μια ιδεα ποιο θα είναι το σωστο input.

[dio]

Κώδικας: Επιλογή όλων

dmesg |grep /dev/video
[ 11.296298] em28xx #0: V4L2 device registered as /dev/video2 and /dev/vbi0

ΟΚ, Ευχαριστώ. Πως μπορω να ρυθμίσω το tvtime να διαβάζει απο /dev/video2 ;
Απο το setup > input configuration > change video source , δεν μου δίνει επιλογές.

[logari81]

δεν το κατεχω το tvtime αλλα λογικά εκει που πηγες θα επρεπε να βρίσκεται η επιλογή. Αν θες δοκίμασε και το xawtv ή το kino.

[gourgi]

τρέξε από τερματικό

Κώδικας: Επιλογή όλων

tvtime -d /dev/video2

για να ορίσεις ως είσοδο την /dev/video2

[dio]

ΟΚ

Κώδικας: Επιλογή όλων

tvtime -d /dev/video2

μου δένει s-video και μαυρη οθόνη (οχι μπλε,παίρνει σήμα) ενω εγώ εχω παρει σήμα απο το video player απο το οποιο κανω επιλογή καναλιών με rca . Θα δω τι θα κάνω.
Στο KINO απο που επιλέγεις πηγή ; Ετρεξα

Κώδικας: Επιλογή όλων

kino -d /dev/video2

μου δίνει ["/dev/video2" s not a DV file. Do you want to import it? ] του εδωσα ΟΚ. Εδωσε [Failed to load media file "/dev/video2.dv] Λογικό.!
Βασικά ο στόχος ειναι να κάνω εγγραφή και να τσεκάρω το CINERELLA . Το κατέχεις;