DVD EZMaker USB Gold Πως θα δουλέψει

[spyroskaftanis]

Γειά σας. Χρησιμοποιώ το ubuntu 8.10 και έχω μια κάρτα video AVERMEDIA DVD EZMaker USB Gold. Κατ'αρχην δεν αναγνωρίζεται σαν νέα συσκευή (αν και αυτό το περίμενα. Έψαξα για drivers, αλλά υπήρχαν μόνο για τα windows. Δοκίμασα το mythtv και το tvtime, αλλά ούτε εκεί κατάφερα να κάνω κάτι. Σας παρακαλώ βοηθήστε με γιατί είναι ανάγκη. Ευχαριστώ

[linuxman]

Δώσε αποτέλεσμα από εντολή

Κώδικας: Επιλογή όλων

lsusb

όταν έχεις συνδέσει την κάρτα και από

Κώδικας: Επιλογή όλων

lspci -nn

να δούμε το υλικό σου .

[logari81]

επιπλέον πόσταρε και το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

[spyroskaftanis]

lsusb -αποτέλεσμα-

Κώδικας: Επιλογή όλων

Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 04f2:b018 Chicony Electronics Co., Ltd Video Device
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 0a5c:2101 Broadcom Corp. A-Link BlueUsbA2 Bluetooth
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lspci -nn- αποτέλεσμα

Κώδικας: Επιλογή όλων

kaftanis@spyroskaftanis-laptop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03)
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03)
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 03)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03)
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 [8086:2847] (rev 03)
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 03)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03)
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03)
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03)
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03)
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection [8086:4229] (rev 61)
0e:06.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05)
0e:06.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
0e:06.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)

dmesg- αποτέλεσμα

Κώδικας: Επιλογή όλων

[ 2.328325] usbcore: registered new interface driver usbfs
[ 2.328350] usbcore: registered new interface driver hub
[ 2.328382] usbcore: registered new device driver usb
[ 2.354263] USB Universal Host Controller Interface driver v3.0
[ 2.354326] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.354339] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.354346] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.354388] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.354436] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.354579] usb usb1: configuration #1 chosen from 1 choice
[ 2.354606] hub 1-0:1.0: USB hub found
[ 2.354614] hub 1-0:1.0: 2 ports detected
[ 2.360406] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.444967] No dock devices found.
[ 2.460343] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.460359] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.460366] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.460390] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.460443] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.460543] usb usb2: configuration #1 chosen from 1 choice
[ 2.460570] hub 2-0:1.0: USB hub found
[ 2.460577] hub 2-0:1.0: 2 ports detected
[ 2.461159] SCSI subsystem initialized
[ 2.502034] libata version 3.00 loaded.
[ 2.668581] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.668605] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.668611] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.668642] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.672561] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.672574] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.672592] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[ 2.688077] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.688233] usb usb3: configuration #1 chosen from 1 choice
[ 2.688261] hub 3-0:1.0: USB hub found
[ 2.688270] hub 3-0:1.0: 4 ports detected
[ 2.892683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.892697] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.892704] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.892731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.892785] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.892874] usb usb4: configuration #1 chosen from 1 choice
[ 2.892899] hub 4-0:1.0: USB hub found
[ 2.892906] hub 4-0:1.0: 2 ports detected
[ 2.996733] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.996744] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.996750] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.996774] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 2.996816] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 2.996900] usb usb5: configuration #1 chosen from 1 choice
[ 2.996925] hub 5-0:1.0: USB hub found
[ 2.996931] hub 5-0:1.0: 2 ports detected
[ 3.000270] Clocksource tsc unstable (delta = -156510861 ns)
[ 3.100734] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.100745] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.100751] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.100774] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.100807] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.100889] usb usb6: configuration #1 chosen from 1 choice
[ 3.100912] hub 6-0:1.0: USB hub found
[ 3.100918] hub 6-0:1.0: 2 ports detected
[ 3.204991] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.205016] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.205022] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.205048] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.208974] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.208987] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.208993] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
[ 3.252273] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 3.264067] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.264193] usb usb7: configuration #1 chosen from 1 choice
[ 3.264237] hub 7-0:1.0: USB hub found
[ 3.264247] hub 7-0:1.0: 6 ports detected
[ 3.473381] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.473417] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.473437] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.473469] tg3.c:v3.94 (August 14, 2008)
[ 3.473474] ahci 0000:00:1f.2: version 3.0
[ 3.473526] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.473530] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.473548] tg3 0000:04:00.0: setting latency timer to 64
[ 3.473762] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 3.473766] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.473780] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.474258] scsi0 : ahci
[ 3.474360] scsi1 : ahci
[ 3.474417] scsi2 : ahci
[ 3.474527] ata1: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 217
[ 3.474531] ata2: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 217
[ 3.474534] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 217
[ 3.494042] usb 3-2: configuration #1 chosen from 1 choice
[ 3.782011] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:16:d4:d9:e4:ca
[ 3.782015] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 3.782018] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.792270] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.793059] ata1.00: _GTF unexpected object type 0x1
[ 3.839681] ata1.00: ATA-8: WDC WD1600BEVS-00UST0, 01.01A01, max UDMA/133
[ 3.839686] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.840804] ata1.00: _GTF unexpected object type 0x1
[ 3.840984] ata1.00: configured for UDMA/133
[ 3.848252] usb 7-1: new high speed USB device using ehci_hcd and address 2
[ 3.981306] usb 7-1: configuration #1 chosen from 1 choice
[ 4.176257] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.220246] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 4.383893] usb 2-1: configuration #1 chosen from 1 choice
[ 4.517268] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.532394] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 01.0 PQ: 0 ANSI: 5
[ 4.536280] ohci1394 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.589083] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.602607] ata_piix 0000:00:1f.1: version 2.12
[ 4.602621] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.602681] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.602762] scsi3 : ata_piix
[ 4.603290] scsi4 : ata_piix
[ 4.604073] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.604076] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.612806] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.624861] Driver 'sd' needs updating - please use bus_type methods
[ 4.624957] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.624974] sd 0:0:0:0: [sda] Write Protect is off
[ 4.624976] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.625001] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.625106] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.625120] sd 0:0:0:0: [sda] Write Protect is off
[ 4.625123] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.625148] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.625151] sda: sda1 sda2 < sda5 >
[ 4.702130] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.764713] ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33
[ 4.780583] ata4.00: configured for UDMA/33
[ 4.950937] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5
[ 4.951150] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 4.978306] Driver 'sr' needs updating - please use bus_type methods
[ 4.988744] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.988750] Uniform CD-ROM driver Revision: 3.20
[ 4.988885] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.108089] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 5.217484] PM: Starting manual resume from disk
[ 5.217487] PM: Resume from partition 8:5
[ 5.217489] PM: Checking hibernation image.
[ 5.217692] PM: Resume from disk failed.
[ 5.296040] kjournald starting. Commit interval 5 seconds
[ 5.296069] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.872222] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75bc40024e]
[ 12.072215] udevd version 124 started
[ 12.417522] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.429053] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.440279] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.461038] ACPI: Power Button (FF) [PWRF]
[ 12.461121] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.461197] ACPI: Lid Switch [LID0]
[ 12.461248] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.492442] Linux agpgart interface v0.103
[ 12.493023] ACPI: Power Button (CM) [PWRB]
[ 12.529171] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.529665] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.532177] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.750474] acpi device:0a: registered as cooling_device2
[ 12.750830] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5
[ 12.773035] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.773333] ACPI: WMI: Mapper loaded
[ 12.778476] ACPI: AC Adapter [ACAD] (on-line)
[ 12.829673] ACPI: Battery Slot [BAT1] (battery present)
[ 13.053269] Bluetooth: Core ver 2.13
[ 13.057267] NET: Registered protocol family 31
[ 13.057269] Bluetooth: HCI device and connection manager initialized
[ 13.057273] Bluetooth: HCI socket layer initialized
[ 13.108109] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.108207] usbcore: registered new interface driver btusb
[ 13.284265] Linux video capture interface: v2.00
[ 13.344147] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[ 13.345835] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input6
[ 13.345879] usbcore: registered new interface driver uvcvideo
[ 13.345895] USB Video Class driver (v0.1.0)
[ 13.455083] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.455123] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.486876] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 13.647027] iTCO_vendor_support: vendor-support=0
[ 13.659203] sdhci: Secure Digital Host Controller Interface driver
[ 13.659206] sdhci: Copyright(c) Pierre Ossman
[ 13.661279] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.662018] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 13.662183] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.678884] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 13.742248] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 13.742274] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 13.743290] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 13.745375] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[ 13.926134] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 13.926137] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 13.938736] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.938770] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 13.938845] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 13.986143] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 14.001582] iwlagn 0000:0c:00.0: PCI INT A disabled
[ 14.002022] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.052776] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 17.106757] lp: driver loaded but no devices found
[ 17.291807] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 17.836655] EXT3 FS on sda1, internal journal
[ 18.831886] type=1505 audit(1247562350.913:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4321
[ 18.983482] type=1505 audit(1247562351.065:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4326
[ 18.983718] type=1505 audit(1247562351.065:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4326
[ 19.200259] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 20.848492] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 20.944376] apm: BIOS not found.
[ 21.120327] ppdev: user-space parallel port driver
[ 23.752164] Bluetooth: L2CAP ver 2.11
[ 23.752176] Bluetooth: L2CAP socket layer initialized
[ 23.801536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 23.801550] Bluetooth: BNEP filters: protocol multicast
[ 23.872521] Bridge firewalling registered
[ 23.897184] Bluetooth: RFCOMM socket layer initialized
[ 23.897209] Bluetooth: RFCOMM TTY layer initialized
[ 23.897214] Bluetooth: RFCOMM ver 1.10
[ 23.927616] Bluetooth: SCO (Voice Link) ver 0.6
[ 23.927627] Bluetooth: SCO socket layer initialized
[ 28.182887] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 28.183111] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
[ 28.186689] firmware: requesting iwlwifi-4965-2.ucode
[ 28.381547] [drm] Initialized drm 1.1.0 20060810
[ 28.433365] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 28.433385] pci 0000:00:02.0: setting latency timer to 64
[ 28.435673] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 28.471018] Registered led device: iwl-phy0:radio
[ 28.471073] Registered led device: iwl-phy0:assoc
[ 28.471114] Registered led device: iwl-phy0:RX
[ 28.471163] Registered led device: iwl-phy0:TX
[ 28.611790] NET: Registered protocol family 17
[ 72.015005] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 72.017394] wlan0: authenticated
[ 72.017408] wlan0: associate with AP 00:13:33:17:ea:82
[ 72.019600] wlan0: RX AssocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 72.019612] wlan0: associated
[ 73.184535] CPU0 attaching NULL sched-domain.
[ 73.184560] CPU1 attaching NULL sched-domain.
[ 73.186340] CPU0 attaching sched-domain:
[ 73.186350] domain 0: span 0-1 level MC
[ 73.186357] groups: 0 1
[ 73.186371] CPU1 attaching sched-domain:
[ 73.186376] domain 0: span 0-1 level MC
[ 73.186382] groups: 1 0
[ 75.476729] NET: Registered protocol family 10
[ 75.479398] lo: Disabled Privacy Extensions
[ 75.483009] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 86.148188] wlan0: no IPv6 routers present
[ 352.576105] CE: hpet increasing min_delta_ns to 15000 nsec
[ 695.620996] usb 7-1: USB disconnect, address 2
[ 697.141217] usb 3-1: new high speed USB device using ehci_hcd and address 4
[ 697.827162] usb 3-1: configuration #1 chosen from 1 choice
[ 1273.217312] type=1505 audit(1247563605.301:5): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=6835
[ 1273.422155] type=1505 audit(1247563605.505:6): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=6840
[ 1273.422498] type=1505 audit(1247563605.505:7): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=6840
[ 1273.470912] type=1505 audit(1247563605.552:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=6844
[ 2574.393131] wlan0: No ProbeResp from current AP 00:13:33:17:ea:82 - assume out of range
[ 2576.188433] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 2576.190791] wlan0: authenticated
[ 2576.190805] wlan0: associate with AP 00:13:33:17:ea:82
[ 2576.194655] wlan0: associate with AP 00:13:33:17:ea:82
[ 2576.195229] iwlagn: index 0 not used in uCode key table.
[ 2576.199722] wlan0: RX ReassocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 2576.199734] wlan0: associated
[ 2697.385275] usb 3-1: USB disconnect, address 4
[ 2699.580099] usb 7-1: new high speed USB device using ehci_hcd and address 3
[ 2700.250141] usb 7-1: configuration #1 chosen from 1 choice
[ 3336.552204] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 3336.607625] saa7134 ALSA driver for DMA sound loaded
[ 3336.607637] saa7134 ALSA: no saa7134 cards found
[ 3383.616570] usb 7-1: USB disconnect, address 3
[ 3416.005090] usb 3-1: new high speed USB device using ehci_hcd and address 5
[ 3416.695914] usb 3-1: configuration #1 chosen from 1 choice
[ 5084.317478] UDF-fs: No VRS found
[ 5084.352185] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 5084.353463] ISOFS: changing to secondary root
[ 5520.189158] usb 7-6: new high speed USB device using ehci_hcd and address 4
[ 5520.329062] usb 7-6: configuration #1 chosen from 1 choice
[ 5520.479094] em28xx v4l2 driver version 0.1.0 loaded
[ 5520.479137] em28xx new video device (eb1a:e323): interface 0, class 255
[ 5520.479142] em28xx Doesn't have usb audio class
[ 5520.479150] em28xx #0: Alternate settings: 8
[ 5520.479152] em28xx #0: Alternate setting 0, max size= 0
[ 5520.479154] em28xx #0: Alternate setting 1, max size= 0
[ 5520.479162] em28xx #0: Alternate setting 2, max size= 1448
[ 5520.479164] em28xx #0: Alternate setting 3, max size= 2048
[ 5520.479167] em28xx #0: Alternate setting 4, max size= 2304
[ 5520.479170] em28xx #0: Alternate setting 5, max size= 2580
[ 5520.479172] em28xx #0: Alternate setting 6, max size= 2892
[ 5520.479174] em28xx #0: Alternate setting 7, max size= 3072
[ 5520.479364] em28xx #0: chip ID is em2882/em2883
[ 5520.513449] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00
[ 5520.513486] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[ 5520.513516] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 5520.513543] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 5520.513571] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513599] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513627] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 5520.513654] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[ 5520.513682] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 5520.513711] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513738] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513765] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513794] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513821] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513848] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513875] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5520.513905] EEPROM ID= 0x9567eb1a, hash = 0x4e913442
[ 5520.513911] Vendor/Product ID= eb1a:e323
[ 5520.513915] AC97 audio (5 sample rates)
[ 5520.513919] 500mA max power
[ 5520.513923] Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 5520.513931] em28xx #0:
[ 5520.513933]
[ 5520.513939] em28xx #0: The support for this board weren't valid yet.
[ 5520.513945] em28xx #0: Please send a report of having this working
[ 5520.513950] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 5520.513953]
[ 5520.645743] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 5520.778052] xc2028 0-0061: creating new instance
[ 5520.778067] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 5520.778090] firmware: requesting xc3028-v27.fw
[ 5520.783983] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[ 5520.888516] tvp5150 0-005c: tvp5150am1 detected.
[ 5521.045364] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 5521.045379] em28xx #0: Found Kworld VS-DVB-T 323UR
[ 5521.045458] usbcore: registered new interface driver em28xx
[ 5521.081611] tvp5150 0-005c: tvp0050am1 detected.
[ 5521.105824] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 5521.105837] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 5521.106698] Em28xx: Initialized (Em28xx Audio Extension) extension
[ 5544.303053] usb 7-6: USB disconnect, address 4
[ 5544.309400] em28xx #0: disconnecting em28xx #0 video
[ 5544.310641] em28xx #0: V4L2 devices /dev/video1 and /dev/vbi0 deregistered
[ 5544.312361] xc2028 0-0061: destroying instance
[ 5561.861286] usb 7-5: new high speed USB device using ehci_hcd and address 5
[ 5561.996673] usb 7-5: configuration #1 chosen from 1 choice
[ 5561.998426] em28xx new video device (eb1a:e323): interface 0, class 255
[ 5561.998442] em28xx Doesn't have usb audio class
[ 5561.998447] em28xx #0: Alternate settings: 8
[ 5561.998452] em28xx #0: Alternate setting 0, max size= 0
[ 5561.998457] em28xx #0: Alternate setting 1, max size= 0
[ 5561.998463] em28xx #0: Alternate setting 2, max size= 1448
[ 5561.998468] em28xx #0: Alternate setting 3, max size= 2048
[ 5561.998473] em28xx #0: Alternate setting 4, max size= 2304
[ 5561.998479] em28xx #0: Alternate setting 5, max size= 2580
[ 5561.998484] em28xx #0: Alternate setting 6, max size= 2892
[ 5561.998489] em28xx #0: Alternate setting 7, max size= 3072
[ 5562.003902] em28xx #0: chip ID is em2882/em2883
[ 5562.053781] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 5562.092764] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 23 e3 d0 12 5c 00 6a 22 00 00
[ 5562.092780] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 01 00 00 00 00 00 00 00 00 00
[ 5562.092791] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00
[ 5562.092802] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00
[ 5562.092813] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092830] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092840] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00
[ 5562.092851] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 33 00 20 00 44 00
[ 5562.092862] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00
[ 5562.092873] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092883] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092894] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092905] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092916] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092926] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092937] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 5562.092949] EEPROM ID= 0x9567eb1a, hash = 0x4e913442
[ 5562.092951] Vendor/Product ID= eb1a:e323
[ 5562.092953] AC97 audio (5 sample rates)
[ 5562.092954] 500mA max power
[ 5562.092956] Table at 0x04, strings=0x226a, 0x0000, 0x0000
[ 5562.092959] em28xx #0:
[ 5562.092960]
[ 5562.092962] em28xx #0: The support for this board weren't valid yet.
[ 5562.092965] em28xx #0: Please send a report of having this working
[ 5562.092967] em28xx #0: not to V4L mailing list (and/or to other addresses)
[ 5562.092968]
[ 5562.106756] xc2028 0-0061: creating new instance
[ 5562.106763] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 5562.106773] firmware: requesting xc3028-v27.fw
[ 5562.111062] xc2028 0-0061: Error: firmware xc3028-v27.fw not found.
[ 5562.201696] tvp5150 0-005c: tvp5150am1 detected.
[ 5562.391786] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
[ 5562.391897] em28xx-audio.c: probing for em28x1 non standard usbaudio
[ 5562.391904] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[ 5562.395341] em28xx #0: Found Kworld VS-DVB-T 323UR
[ 5562.477759] tvp5150 0-005c: tvp5150am1 detected.
[ 6483.574126] usb 3-1: USB disconnect, address 5
[ 7551.400778] usb 7-5: USB disconnect, address 5
[ 7551.405181] em28xx #0: disconnecting em28xx #0 video
[ 7551.405196] em28xx #0: V4L2 devices /dev/video1 and /dev/vbi0 deregistered
[ 7551.405435] xc2028 0-0061: destroying instance
[ 9684.837099] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 9685.156390] usb 1-1: configuration #1 chosen from 1 choice
[ 9685.317806] usbcore: registered new interface driver hiddev
[ 9685.390475] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input9
[ 9685.418328] input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-1
[ 9685.418429] usbcore: registered new interface driver usbhid
[ 9685.418437] usbhid: v2.6:USB HID core driver
[ 9702.425220] usb 1-1: USB disconnect, address 2
[ 9708.212451] usb 1-1: new full speed USB device using uhci_hcd and address 3
[ 9708.598071] usb 1-1: configuration #1 chosen from 1 choice
[ 9708.710330] input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input10
[ 9708.760199] input,hiddev96,hidraw0: USB HID v1.11 Joystick [Sony PLAYSTATION(R)3 Controller] on usb-0000:00:1a.0-1
[ 9804.903885] CPU0 attaching NULL sched-domain.
[ 9804.903898] CPU1 attaching NULL sched-domain.
[ 9804.905122] CPU0 attaching sched-domain:
[ 9804.905129] domain 0: span 0-1 level MC
[ 9804.905134] groups: 0 1
[ 9804.905141] domain 1: span 0-1 level CPU
[ 9804.905145] groups: 0-1
[ 9804.905152] CPU1 attaching sched-domain:
[ 9804.905155] domain 0: span 0-1 level MC
[ 9804.905160] groups: 1 0
[ 9804.905166] domain 1: span 0-1 level CPU
[ 9804.905170] groups: 0-1
[12030.181685] CPU0 attaching NULL sched-domain.
[12030.181719] CPU1 attaching NULL sched-domain.
[12030.187825] CPU0 attaching sched-domain:
[12030.187833] domain 0: span 0-1 level MC
[12030.187838] groups: 0 1
[12030.187848] CPU1 attaching sched-domain:
[12030.187851] domain 0: span 0-1 level MC
[12030.187855] groups: 1 0
[12079.505221] usb 1-1: USB disconnect, address 3
[12539.030580] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[12644.192090] usb 7-1: new high speed USB device using ehci_hcd and address 6
[12644.870728] usb 7-1: configuration #1 chosen from 1 choice

Υ/Γ χρειάζομαι την κάρτα αυτή για να την συνδέσω με το Playstation 3 η οθόνη του Υπολογιστή μου να λειτουργεί ως οθόνη του playstation. άρα γι αυτό βγήκε μεταξύ των άλλων και αυτή η σειρά: input: Sony PLAYSTATION(R)3 Controller as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0/input/input9

[logari81]

-Μετακίνησα το νήμα στην σωστη ενότητα
-Πρόσθεσα τα απαραιτητα bbcode στο τελευταιο ποστ σου

απότι βλέπω εχεις και μια κάρτα τηλεόρασης. Δοκίμασε να την αποσυνδεσεις για δοκιμή και να κανεις εκκινηση εχοντας συνδεμενη μονο την συσκευή με την οποία εχεις το προβλημα.

Το πιθανοτερο ειναι να μην την βλεπεις στο tvtime γιατι δηλώνεται ως /dev/video1 αφου το /dev/video0 καταλαμβανεται ήδη από την καρτα τηλεόρασης. Αν ισχύει αυτό τοτε ειναι απλώς θεμα ρύθμισης του tvtime.

[spyroskaftanis]

το έκανα και δεν έγινε τίποτα. το tvtime λέει no signal και μια μπλε οθόνη. μήπως μπορείς να γίνεις πιο συγκεκριμένος και να μου πεις ποιες ρυθμίσεις θα πρέπει να κάνω;
Υ/Γ sorry για τα λάθη στο προηγούμενο post

[logari81]

καταρχην στειλε το νεο αποτελεσμα του dmesg. Η ρυθμιση στο tvtime στην οποία αναφερομαι ειναι το video input αλλα δεν θυμαμαι που ακριβως ειναι

[spyroskaftanis]

Κώδικας: Επιλογή όλων

[ 0.580041] Switched to high resolution mode on CPU 0
[ 0.580534] Switched to high resolution mode on CPU 1
[ 0.584020] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.584024] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.584027] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.584031] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.584034] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.584037] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.584040] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.584043] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.584052] system 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.584059] system 00:07: ioport range 0x680-0x69f has been reserved
[ 0.584062] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.584065] system 00:07: ioport range 0x1000-0x107f has been reserved
[ 0.584068] system 00:07: ioport range 0x1180-0x11bf has been reserved
[ 0.584071] system 00:07: ioport range 0x1640-0x164f has been reserved
[ 0.584074] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[ 0.584077] system 00:07: ioport range 0xff00-0xff7f has been reserved
[ 0.619180] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.619184] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.619191] pci 0000:00:1c.0: MEM window: 0xb0000000-0xb3ffffff
[ 0.619196] pci 0000:00:1c.0: PREFETCH window: 0x000000c8000000-0x000000cbffffff
[ 0.619205] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.619209] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.619215] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf7ffffff
[ 0.619220] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
[ 0.619229] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.619233] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.619240] pci 0000:00:1c.2: MEM window: 0xa8000000-0xabffffff
[ 0.619245] pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c3ffffff
[ 0.619254] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.619257] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.619264] pci 0000:00:1c.3: MEM window: 0xa0000000-0xa3ffffff
[ 0.619269] pci 0000:00:1c.3: PREFETCH window: 0x000000b8000000-0x000000bbffffff
[ 0.619278] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a
[ 0.619280] pci 0000:00:1c.4: IO window: disabled
[ 0.619287] pci 0000:00:1c.4: MEM window: disabled
[ 0.619292] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.619301] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c
[ 0.619302] pci 0000:00:1c.5: IO window: disabled
[ 0.619309] pci 0000:00:1c.5: MEM window: 0xf8200000-0xf82fffff
[ 0.619314] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.619323] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
[ 0.619324] pci 0000:00:1e.0: IO window: disabled
[ 0.619331] pci 0000:00:1e.0: MEM window: 0xf8300000-0xf83fffff
[ 0.619336] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.619353] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.619359] pci 0000:00:1c.0: setting latency timer to 64
[ 0.619369] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.619375] pci 0000:00:1c.1: setting latency timer to 64
[ 0.619385] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.619390] pci 0000:00:1c.2: setting latency timer to 64
[ 0.619400] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.619405] pci 0000:00:1c.3: setting latency timer to 64
[ 0.619414] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.619420] pci 0000:00:1c.4: setting latency timer to 64
[ 0.619429] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.619434] pci 0000:00:1c.5: setting latency timer to 64
[ 0.619443] pci 0000:00:1e.0: setting latency timer to 64
[ 0.619447] bus: 00 index 0 io port: [0, ffff]
[ 0.619449] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.619451] bus: 02 index 0 io port: [2000, 2fff]
[ 0.619453] bus: 02 index 1 mmio: [b0000000, b3ffffff]
[ 0.619455] bus: 02 index 2 mmio: [c8000000, cbffffff]
[ 0.619458] bus: 02 index 3 mmio: [0, 0]
[ 0.619460] bus: 04 index 0 io port: [3000, 3fff]
[ 0.619462] bus: 04 index 1 mmio: [f4000000, f7ffffff]
[ 0.619464] bus: 04 index 2 mmio: [f0000000, f3ffffff]
[ 0.619466] bus: 04 index 3 mmio: [0, 0]
[ 0.619468] bus: 06 index 0 io port: [4000, 4fff]
[ 0.619470] bus: 06 index 1 mmio: [a8000000, abffffff]
[ 0.619472] bus: 06 index 2 mmio: [c0000000, c3ffffff]
[ 0.619474] bus: 06 index 3 mmio: [0, 0]
[ 0.619476] bus: 08 index 0 io port: [5000, 5fff]
[ 0.619478] bus: 08 index 1 mmio: [a0000000, a3ffffff]
[ 0.619480] bus: 08 index 2 mmio: [b8000000, bbffffff]
[ 0.619482] bus: 08 index 3 mmio: [0, 0]
[ 0.619484] bus: 0a index 0 mmio: [0, 0]
[ 0.619486] bus: 0a index 1 mmio: [0, 0]
[ 0.619487] bus: 0a index 2 mmio: [0, 0]
[ 0.619489] bus: 0a index 3 mmio: [0, 0]
[ 0.619491] bus: 0c index 0 mmio: [0, 0]
[ 0.619493] bus: 0c index 1 mmio: [f8200000, f82fffff]
[ 0.619495] bus: 0c index 2 mmio: [0, 0]
[ 0.619497] bus: 0c index 3 mmio: [0, 0]
[ 0.619499] bus: 0e index 0 mmio: [0, 0]
[ 0.619501] bus: 0e index 1 mmio: [f8300000, f83fffff]
[ 0.619503] bus: 0e index 2 mmio: [0, 0]
[ 0.619505] bus: 0e index 3 io port: [0, ffff]
[ 0.619507] bus: 0e index 4 mmio: [0, ffffffff]
[ 0.619515] NET: Registered protocol family 2
[ 0.632049] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.632279] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.632654] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.632846] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.632850] TCP reno registered
[ 0.636072] NET: Registered protocol family 1
[ 0.636192] checking if image is initramfs...<6>ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.964996] it is
[ 1.322145] Freeing initrd memory: 8018k freed
[ 1.322332] Simple Boot Flag at 0x38 set to 0x1
[ 1.323238] audit: initializing netlink socket (disabled)
[ 1.323261] type=2000 audit(1247599328.321:1): initialized
[ 1.328313] highmem bounce pool size: 64 pages
[ 1.328320] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.330555] VFS: Disk quotas dquot_6.5.1
[ 1.330636] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.330734] msgmni has been set to 1743
[ 1.330852] io scheduler noop registered
[ 1.330855] io scheduler anticipatory registered
[ 1.330858] io scheduler deadline registered
[ 1.330869] io scheduler cfq registered (default)
[ 1.330884] pci 0000:00:02.0: Boot video device
[ 1.331195] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.331311] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.331418] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.331459] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.331496] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.331695] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.331800] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.331908] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.331944] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.331982] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.332175] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.332275] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.332381] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.332419] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.332456] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.332658] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.332773] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.332881] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.332919] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.332954] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.333149] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.333266] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.333371] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.333409] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.333447] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.333650] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.333759] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.333867] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.333908] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.333947] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.334361] isapnp: Scanning for PnP cards...
[ 1.691647] isapnp: No Plug & Play device found
[ 1.722087] hpet_resources: 0xfed00000 is busy
[ 1.722151] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.724349] brd: module loaded
[ 1.724412] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.724526] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.765212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.765218] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.769109] mice: PS/2 mouse device common for all mice
[ 1.769222] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.769260] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.769374] EISA: Probing bus 0 at eisa.0
[ 1.769383] Cannot allocate resource for EISA slot 1
[ 1.769386] Cannot allocate resource for EISA slot 2
[ 1.769388] Cannot allocate resource for EISA slot 3
[ 1.769391] Cannot allocate resource for EISA slot 4
[ 1.769393] Cannot allocate resource for EISA slot 5
[ 1.769414] EISA: Detected 0 cards.
[ 1.769417] cpuidle: using governor ladder
[ 1.769420] cpuidle: using governor menu
[ 1.769926] TCP cubic registered
[ 1.769953] Using IPI No-Shortcut mode
[ 1.770112] registered taskstats version 1
[ 1.770241] Magic number: 1:895:394
[ 1.770354] rtc_cmos 00:08: setting system clock to 2009-07-14 19:22:09 UTC (1247599329)
[ 1.770357] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.770359] EDD information not available.
[ 1.770597] Freeing unused kernel memory: 428k freed
[ 1.770634] Write protecting the kernel text: 2580k
[ 1.770659] Write protecting the kernel read-only data: 940k
[ 1.804637] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.933062] fuse init (API version 7.9)
[ 2.029556] ACPI: SSDT 7F6D9679, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.029993] ACPI: SSDT 7F6D914A, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.032671] Monitor-Mwait will be used to enter C-1 state
[ 2.032675] Monitor-Mwait will be used to enter C-2 state
[ 2.032677] Monitor-Mwait will be used to enter C-3 state
[ 2.032848] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.032904] processor ACPI0007:00: registered as cooling_device0
[ 2.032908] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.036009] Marking TSC unstable due to TSC halts in idle
[ 2.040252] ACPI: SSDT 7F6D98F3, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 2.040646] ACPI: SSDT 7F6D95F4, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 2.041996] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.042066] processor ACPI0007:01: registered as cooling_device1
[ 2.042072] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.393092] usbcore: registered new interface driver usbfs
[ 2.393114] usbcore: registered new interface driver hub
[ 2.408371] usbcore: registered new device driver usb
[ 2.421314] tg3.c:v3.94 (August 14, 2008)
[ 2.421381] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.421400] tg3 0000:04:00.0: setting latency timer to 64
[ 2.453195] USB Universal Host Controller Interface driver v3.0
[ 2.453243] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.453257] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.453263] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.453306] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.453354] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.453503] usb usb1: configuration #1 chosen from 1 choice
[ 2.453531] hub 1-0:1.0: USB hub found
[ 2.453539] hub 1-0:1.0: 2 ports detected
[ 2.456413] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.458370] No dock devices found.
[ 2.479895] SCSI subsystem initialized
[ 2.512292] libata version 3.00 loaded.
[ 2.557393] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.557409] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.557415] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.557441] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.557489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.557588] usb usb2: configuration #1 chosen from 1 choice
[ 2.557615] hub 2-0:1.0: USB hub found
[ 2.557622] hub 2-0:1.0: 2 ports detected
[ 2.770833] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:16:d4:d9:e4:ca
[ 2.770838] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 2.770840] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.770885] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.770908] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.770914] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.770942] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.774881] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.774895] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.774914] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[ 2.789074] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.789231] usb usb3: configuration #1 chosen from 1 choice
[ 2.789260] hub 3-0:1.0: USB hub found
[ 2.789269] hub 3-0:1.0: 4 ports detected
[ 2.996542] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.996557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.996563] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.996586] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.996631] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.996721] usb usb4: configuration #1 chosen from 1 choice
[ 2.996747] hub 4-0:1.0: USB hub found
[ 2.996753] hub 4-0:1.0: 2 ports detected
[ 3.001245] Clocksource tsc unstable (delta = -181491759 ns)
[ 3.100459] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.100470] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.100476] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.100499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.100549] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.100626] usb usb5: configuration #1 chosen from 1 choice
[ 3.100651] hub 5-0:1.0: USB hub found
[ 3.100656] hub 5-0:1.0: 2 ports detected
[ 3.204457] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.204469] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.204475] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.204498] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.204536] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.204617] usb usb6: configuration #1 chosen from 1 choice
[ 3.204641] hub 6-0:1.0: USB hub found
[ 3.204647] hub 6-0:1.0: 2 ports detected
[ 3.248257] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 3.308339] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.308357] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.308361] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.308385] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.312289] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.312298] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.312302] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
[ 3.425068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.425191] usb usb7: configuration #1 chosen from 1 choice
[ 3.425238] hub 7-0:1.0: USB hub found
[ 3.425249] hub 7-0:1.0: 6 ports detected
[ 3.486899] usb 3-2: configuration #1 chosen from 1 choice
[ 3.529199] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.529240] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.529257] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.529277] ahci 0000:00:1f.2: version 3.0
[ 3.529293] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.529423] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 3.529426] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.529435] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.529650] scsi0 : ahci
[ 3.529750] scsi1 : ahci
[ 3.529809] scsi2 : ahci
[ 3.529918] ata1: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 217
[ 3.529924] ata2: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 217
[ 3.529929] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 217
[ 3.848273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.848997] ata1.00: _GTF unexpected object type 0x1
[ 3.864092] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.902747] ata1.00: ATA-8: WDC WD1600BEVS-00UST0, 01.01A01, max UDMA/133
[ 3.902752] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.903829] ata1.00: _GTF unexpected object type 0x1
[ 3.904041] ata1.00: configured for UDMA/133
[ 4.027984] usb 2-1: configuration #1 chosen from 1 choice
[ 4.240262] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.576257] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.592401] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 01.0 PQ: 0 ANSI: 5
[ 4.596428] ohci1394 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.649172] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.655041] ata_piix 0000:00:1f.1: version 2.12
[ 4.655056] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.655115] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.655353] scsi3 : ata_piix
[ 4.655420] scsi4 : ata_piix
[ 4.656203] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.656207] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.682843] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.695296] Driver 'sd' needs updating - please use bus_type methods
[ 4.695401] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.695418] sd 0:0:0:0: [sda] Write Protect is off
[ 4.695420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.695444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.695509] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.695522] sd 0:0:0:0: [sda] Write Protect is off
[ 4.695525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.695548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.695552] sda: sda1 sda2 < sda5 >
[ 4.776325] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.816704] ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33
[ 4.832586] ata4.00: configured for UDMA/33
[ 5.002955] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5
[ 5.003145] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 5.026052] Driver 'sr' needs updating - please use bus_type methods
[ 5.036178] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.036184] Uniform CD-ROM driver Revision: 3.20
[ 5.036315] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.231241] PM: Starting manual resume from disk
[ 5.231245] PM: Resume from partition 8:5
[ 5.231246] PM: Checking hibernation image.
[ 5.231490] PM: Resume from disk failed.
[ 5.303524] kjournald starting. Commit interval 5 seconds
[ 5.303549] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.924653] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75bc40024e]
[ 12.090779] udevd version 124 started
[ 12.409119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.421153] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.542627] Linux agpgart interface v0.103
[ 12.629196] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.664469] ACPI: Power Button (FF) [PWRF]
[ 12.664623] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.664701] ACPI: Lid Switch [LID0]
[ 12.664775] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.685039] ACPI: Power Button (CM) [PWRB]
[ 12.685227] ACPI: WMI: Mapper loaded
[ 12.741916] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.742401] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.744880] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.928984] acpi device:0a: registered as cooling_device2
[ 12.929378] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5
[ 12.955830] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.961036] ACPI: AC Adapter [ACAD] (off-line)
[ 12.980687] ACPI: Battery Slot [BAT1] (battery present)
[ 13.236160] Bluetooth: Core ver 2.13
[ 13.284751] NET: Registered protocol family 31
[ 13.284756] Bluetooth: HCI device and connection manager initialized
[ 13.284761] Bluetooth: HCI socket layer initialized
[ 13.331817] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.337742] usbcore: registered new interface driver btusb
[ 13.372763] Linux video capture interface: v2.00
[ 13.582736] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.582777] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.613902] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 13.633152] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 13.633155] ricoh-mmc: Copyright(c) Philip Langdale
[ 13.689214] ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
[ 13.689247] ricoh-mmc: Controller is now disabled.
[ 13.704223] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.708259] sdhci: Secure Digital Host Controller Interface driver
[ 13.708262] sdhci: Copyright(c) Pierre Ossman
[ 13.719905] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 13.719932] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 13.720950] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 13.723035] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[ 13.788482] iTCO_vendor_support: vendor-support=0
[ 13.876121] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[ 13.877778] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input7
[ 13.877953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.964223] usbcore: registered new interface driver uvcvideo
[ 13.964247] USB Video Class driver (v0.1.0)
[ 14.066892] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 14.066895] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 14.067020] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.067055] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 14.067146] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 14.114482] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 14.115821] iwlagn 0000:0c:00.0: PCI INT A disabled
[ 14.116293] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.031704] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.040745] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 16.040828] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.102874] lp: driver loaded but no devices found
[ 17.288386] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 17.321041] EXT3 FS on sda1, internal journal
[ 17.804814] type=1505 audit(1247599345.890:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4269
[ 17.956458] type=1505 audit(1247599346.042:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4274
[ 17.956670] type=1505 audit(1247599346.042:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4274
[ 18.002572] type=1505 audit(1247599346.086:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4278
[ 18.195003] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.876708] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.209194] apm: BIOS not found.
[ 22.485442] ppdev: user-space parallel port driver
[ 24.240236] NET: Registered protocol family 10
[ 24.241667] lo: Disabled Privacy Extensions
[ 27.999896] Bluetooth: L2CAP ver 2.11
[ 27.999909] Bluetooth: L2CAP socket layer initialized
[ 28.103762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.103775] Bluetooth: BNEP filters: protocol multicast
[ 28.192457] Bluetooth: RFCOMM socket layer initialized
[ 28.193031] Bluetooth: RFCOMM TTY layer initialized
[ 28.193044] Bluetooth: RFCOMM ver 1.10
[ 28.205985] Bridge firewalling registered
[ 28.246570] Bluetooth: SCO (Voice Link) ver 0.6
[ 28.246582] Bluetooth: SCO socket layer initialized
[ 32.488510] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.493126] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 32.493329] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
[ 32.496904] firmware: requesting iwlwifi-4965-2.ucode
[ 32.788181] Registered led device: iwl-phy0:radio
[ 32.788683] Registered led device: iwl-phy0:assoc
[ 32.789092] Registered led device: iwl-phy0:RX
[ 32.790075] Registered led device: iwl-phy0:TX
[ 32.813355] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.862390] [drm] Initialized drm 1.1.0 20060810
[ 32.874951] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.874959] pci 0000:00:02.0: setting latency timer to 64
[ 32.875778] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 32.912724] NET: Registered protocol family 17
[ 50.605032] CE: hpet increasing min_delta_ns to 15000 nsec
[ 84.529707] CPU0 attaching NULL sched-domain.
[ 84.529721] CPU1 attaching NULL sched-domain.
[ 84.532141] CPU0 attaching sched-domain:
[ 84.532147] domain 0: span 0-1 level MC
[ 84.532152] groups: 0 1
[ 84.532160] domain 1: span 0-1 level CPU
[ 84.532164] groups: 0-1
[ 84.532171] CPU1 attaching sched-domain:
[ 84.532175] domain 0: span 0-1 level MC
[ 84.532178] groups: 1 0
[ 84.532185] domain 1: span 0-1 level CPU
[ 84.532189] groups: 0-1
[ 89.386047] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 89.387875] wlan0: authenticated
[ 89.387889] wlan0: associate with AP 00:13:33:17:ea:82
[ 89.390044] wlan0: RX AssocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 89.390056] wlan0: associated
[ 89.397637] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.532159] wlan0: no IPv6 routers presen

t

[spyroskaftanis]

sorry. αυτό είναι το κανονικό αποτέλεσμα της dmesg. στην προηγούμενη είχα ξεσινδέσει κατά λάθος την κάρτα και άργησα να το καταλάβω

Κώδικας: Επιλογή όλων


[ 0.584037] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.584040] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.584043] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.584052] system 00:05: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.584059] system 00:07: ioport range 0x680-0x69f has been reserved
[ 0.584062] system 00:07: ioport range 0x800-0x80f has been reserved
[ 0.584065] system 00:07: ioport range 0x1000-0x107f has been reserved
[ 0.584068] system 00:07: ioport range 0x1180-0x11bf has been reserved
[ 0.584071] system 00:07: ioport range 0x1640-0x164f has been reserved
[ 0.584074] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[ 0.584077] system 00:07: ioport range 0xff00-0xff7f has been reserved
[ 0.619180] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.619184] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.619191] pci 0000:00:1c.0: MEM window: 0xb0000000-0xb3ffffff
[ 0.619196] pci 0000:00:1c.0: PREFETCH window: 0x000000c8000000-0x000000cbffffff
[ 0.619205] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 0.619209] pci 0000:00:1c.1: IO window: 0x3000-0x3fff
[ 0.619215] pci 0000:00:1c.1: MEM window: 0xf4000000-0xf7ffffff
[ 0.619220] pci 0000:00:1c.1: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
[ 0.619229] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:06
[ 0.619233] pci 0000:00:1c.2: IO window: 0x4000-0x4fff
[ 0.619240] pci 0000:00:1c.2: MEM window: 0xa8000000-0xabffffff
[ 0.619245] pci 0000:00:1c.2: PREFETCH window: 0x000000c0000000-0x000000c3ffffff
[ 0.619254] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:08
[ 0.619257] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.619264] pci 0000:00:1c.3: MEM window: 0xa0000000-0xa3ffffff
[ 0.619269] pci 0000:00:1c.3: PREFETCH window: 0x000000b8000000-0x000000bbffffff
[ 0.619278] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0a
[ 0.619280] pci 0000:00:1c.4: IO window: disabled
[ 0.619287] pci 0000:00:1c.4: MEM window: disabled
[ 0.619292] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.619301] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:0c
[ 0.619302] pci 0000:00:1c.5: IO window: disabled
[ 0.619309] pci 0000:00:1c.5: MEM window: 0xf8200000-0xf82fffff
[ 0.619314] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.619323] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0e
[ 0.619324] pci 0000:00:1e.0: IO window: disabled
[ 0.619331] pci 0000:00:1e.0: MEM window: 0xf8300000-0xf83fffff
[ 0.619336] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.619353] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.619359] pci 0000:00:1c.0: setting latency timer to 64
[ 0.619369] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.619375] pci 0000:00:1c.1: setting latency timer to 64
[ 0.619385] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.619390] pci 0000:00:1c.2: setting latency timer to 64
[ 0.619400] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.619405] pci 0000:00:1c.3: setting latency timer to 64
[ 0.619414] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.619420] pci 0000:00:1c.4: setting latency timer to 64
[ 0.619429] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.619434] pci 0000:00:1c.5: setting latency timer to 64
[ 0.619443] pci 0000:00:1e.0: setting latency timer to 64
[ 0.619447] bus: 00 index 0 io port: [0, ffff]
[ 0.619449] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.619451] bus: 02 index 0 io port: [2000, 2fff]
[ 0.619453] bus: 02 index 1 mmio: [b0000000, b3ffffff]
[ 0.619455] bus: 02 index 2 mmio: [c8000000, cbffffff]
[ 0.619458] bus: 02 index 3 mmio: [0, 0]
[ 0.619460] bus: 04 index 0 io port: [3000, 3fff]
[ 0.619462] bus: 04 index 1 mmio: [f4000000, f7ffffff]
[ 0.619464] bus: 04 index 2 mmio: [f0000000, f3ffffff]
[ 0.619466] bus: 04 index 3 mmio: [0, 0]
[ 0.619468] bus: 06 index 0 io port: [4000, 4fff]
[ 0.619470] bus: 06 index 1 mmio: [a8000000, abffffff]
[ 0.619472] bus: 06 index 2 mmio: [c0000000, c3ffffff]
[ 0.619474] bus: 06 index 3 mmio: [0, 0]
[ 0.619476] bus: 08 index 0 io port: [5000, 5fff]
[ 0.619478] bus: 08 index 1 mmio: [a0000000, a3ffffff]
[ 0.619480] bus: 08 index 2 mmio: [b8000000, bbffffff]
[ 0.619482] bus: 08 index 3 mmio: [0, 0]
[ 0.619484] bus: 0a index 0 mmio: [0, 0]
[ 0.619486] bus: 0a index 1 mmio: [0, 0]
[ 0.619487] bus: 0a index 2 mmio: [0, 0]
[ 0.619489] bus: 0a index 3 mmio: [0, 0]
[ 0.619491] bus: 0c index 0 mmio: [0, 0]
[ 0.619493] bus: 0c index 1 mmio: [f8200000, f82fffff]
[ 0.619495] bus: 0c index 2 mmio: [0, 0]
[ 0.619497] bus: 0c index 3 mmio: [0, 0]
[ 0.619499] bus: 0e index 0 mmio: [0, 0]
[ 0.619501] bus: 0e index 1 mmio: [f8300000, f83fffff]
[ 0.619503] bus: 0e index 2 mmio: [0, 0]
[ 0.619505] bus: 0e index 3 io port: [0, ffff]
[ 0.619507] bus: 0e index 4 mmio: [0, ffffffff]
[ 0.619515] NET: Registered protocol family 2
[ 0.632049] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.632279] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.632654] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.632846] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.632850] TCP reno registered
[ 0.636072] NET: Registered protocol family 1
[ 0.636192] checking if image is initramfs...<6>ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.964996] it is
[ 1.322145] Freeing initrd memory: 8018k freed
[ 1.322332] Simple Boot Flag at 0x38 set to 0x1
[ 1.323238] audit: initializing netlink socket (disabled)
[ 1.323261] type=2000 audit(1247599328.321:1): initialized
[ 1.328313] highmem bounce pool size: 64 pages
[ 1.328320] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.330555] VFS: Disk quotas dquot_6.5.1
[ 1.330636] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.330734] msgmni has been set to 1743
[ 1.330852] io scheduler noop registered
[ 1.330855] io scheduler anticipatory registered
[ 1.330858] io scheduler deadline registered
[ 1.330869] io scheduler cfq registered (default)
[ 1.330884] pci 0000:00:02.0: Boot video device
[ 1.331195] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.331311] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.331418] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.331459] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.331496] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.331695] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 1.331800] pcieport-driver 0000:00:1c.1: found MSI capability
[ 1.331908] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 1.331944] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 1.331982] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 1.332175] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 1.332275] pcieport-driver 0000:00:1c.2: found MSI capability
[ 1.332381] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 1.332419] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 1.332456] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 1.332658] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.332773] pcieport-driver 0000:00:1c.3: found MSI capability
[ 1.332881] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 1.332919] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 1.332954] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 1.333149] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 1.333266] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.333371] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 1.333409] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 1.333447] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 1.333650] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.333759] pcieport-driver 0000:00:1c.5: found MSI capability
[ 1.333867] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 1.333908] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 1.333947] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 1.334361] isapnp: Scanning for PnP cards...
[ 1.691647] isapnp: No Plug & Play device found
[ 1.722087] hpet_resources: 0xfed00000 is busy
[ 1.722151] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.724349] brd: module loaded
[ 1.724412] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.724526] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.765212] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.765218] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.769109] mice: PS/2 mouse device common for all mice
[ 1.769222] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.769260] rtc0: alarms up to one month, y3k, hpet irqs
[ 1.769374] EISA: Probing bus 0 at eisa.0
[ 1.769383] Cannot allocate resource for EISA slot 1
[ 1.769386] Cannot allocate resource for EISA slot 2
[ 1.769388] Cannot allocate resource for EISA slot 3
[ 1.769391] Cannot allocate resource for EISA slot 4
[ 1.769393] Cannot allocate resource for EISA slot 5
[ 1.769414] EISA: Detected 0 cards.
[ 1.769417] cpuidle: using governor ladder
[ 1.769420] cpuidle: using governor menu
[ 1.769926] TCP cubic registered
[ 1.769953] Using IPI No-Shortcut mode
[ 1.770112] registered taskstats version 1
[ 1.770241] Magic number: 1:895:394
[ 1.770354] rtc_cmos 00:08: setting system clock to 2009-07-14 19:22:09 UTC (1247599329)
[ 1.770357] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.770359] EDD information not available.
[ 1.770597] Freeing unused kernel memory: 428k freed
[ 1.770634] Write protecting the kernel text: 2580k
[ 1.770659] Write protecting the kernel read-only data: 940k
[ 1.804637] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 1.933062] fuse init (API version 7.9)
[ 2.029556] ACPI: SSDT 7F6D9679, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.029993] ACPI: SSDT 7F6D914A, 04AA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.032671] Monitor-Mwait will be used to enter C-1 state
[ 2.032675] Monitor-Mwait will be used to enter C-2 state
[ 2.032677] Monitor-Mwait will be used to enter C-3 state
[ 2.032848] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.032904] processor ACPI0007:00: registered as cooling_device0
[ 2.032908] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.036009] Marking TSC unstable due to TSC halts in idle
[ 2.040252] ACPI: SSDT 7F6D98F3, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 2.040646] ACPI: SSDT 7F6D95F4, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 2.041996] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.042066] processor ACPI0007:01: registered as cooling_device1
[ 2.042072] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.393092] usbcore: registered new interface driver usbfs
[ 2.393114] usbcore: registered new interface driver hub
[ 2.408371] usbcore: registered new device driver usb
[ 2.421314] tg3.c:v3.94 (August 14, 2008)
[ 2.421381] tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.421400] tg3 0000:04:00.0: setting latency timer to 64
[ 2.453195] USB Universal Host Controller Interface driver v3.0
[ 2.453243] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.453257] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.453263] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.453306] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.453354] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 2.453503] usb usb1: configuration #1 chosen from 1 choice
[ 2.453531] hub 1-0:1.0: USB hub found
[ 2.453539] hub 1-0:1.0: 2 ports detected
[ 2.456413] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 2.458370] No dock devices found.
[ 2.479895] SCSI subsystem initialized
[ 2.512292] libata version 3.00 loaded.
[ 2.557393] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.557409] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.557415] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.557441] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 2.557489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 2.557588] usb usb2: configuration #1 chosen from 1 choice
[ 2.557615] hub 2-0:1.0: USB hub found
[ 2.557622] hub 2-0:1.0: 2 ports detected
[ 2.770833] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:16:d4:d9:e4:ca
[ 2.770838] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
[ 2.770840] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.770885] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.770908] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.770914] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.770942] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 2.774881] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.774895] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.774914] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8604800
[ 2.789074] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.789231] usb usb3: configuration #1 chosen from 1 choice
[ 2.789260] hub 3-0:1.0: USB hub found
[ 2.789269] hub 3-0:1.0: 4 ports detected
[ 2.996542] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.996557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.996563] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.996586] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 2.996631] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 2.996721] usb usb4: configuration #1 chosen from 1 choice
[ 2.996747] hub 4-0:1.0: USB hub found
[ 2.996753] hub 4-0:1.0: 2 ports detected
[ 3.001245] Clocksource tsc unstable (delta = -181491759 ns)
[ 3.100459] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.100470] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.100476] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.100499] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.100549] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 3.100626] usb usb5: configuration #1 chosen from 1 choice
[ 3.100651] hub 5-0:1.0: USB hub found
[ 3.100656] hub 5-0:1.0: 2 ports detected
[ 3.204457] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.204469] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.204475] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.204498] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 3.204536] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 3.204617] usb usb6: configuration #1 chosen from 1 choice
[ 3.204641] hub 6-0:1.0: USB hub found
[ 3.204647] hub 6-0:1.0: 2 ports detected
[ 3.248257] usb 3-2: new high speed USB device using ehci_hcd and address 2
[ 3.308339] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.308357] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.308361] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.308385] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 3.312289] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.312298] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 3.312302] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8604c00
[ 3.425068] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.425191] usb usb7: configuration #1 chosen from 1 choice
[ 3.425238] hub 7-0:1.0: USB hub found
[ 3.425249] hub 7-0:1.0: 6 ports detected
[ 3.486899] usb 3-2: configuration #1 chosen from 1 choice
[ 3.529199] pata_acpi 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.529240] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 3.529257] pata_acpi 0000:00:1f.1: PCI INT A disabled
[ 3.529277] ahci 0000:00:1f.2: version 3.0
[ 3.529293] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.529423] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 3.529426] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.529435] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.529650] scsi0 : ahci
[ 3.529750] scsi1 : ahci
[ 3.529809] scsi2 : ahci
[ 3.529918] ata1: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604100 irq 217
[ 3.529924] ata2: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604180 irq 217
[ 3.529929] ata3: SATA max UDMA/133 abar m2048@0xf8604000 port 0xf8604200 irq 217
[ 3.848273] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.848997] ata1.00: _GTF unexpected object type 0x1
[ 3.864092] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 3.902747] ata1.00: ATA-8: WDC WD1600BEVS-00UST0, 01.01A01, max UDMA/133
[ 3.902752] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.903829] ata1.00: _GTF unexpected object type 0x1
[ 3.904041] ata1.00: configured for UDMA/133
[ 4.027984] usb 2-1: configuration #1 chosen from 1 choice
[ 4.240262] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.576257] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.592401] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 01.0 PQ: 0 ANSI: 5
[ 4.596428] ohci1394 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4.649172] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[f8300000-f83007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 4.655041] ata_piix 0000:00:1f.1: version 2.12
[ 4.655056] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.655115] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 4.655353] scsi3 : ata_piix
[ 4.655420] scsi4 : ata_piix
[ 4.656203] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 4.656207] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 4.682843] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.695296] Driver 'sd' needs updating - please use bus_type methods
[ 4.695401] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.695418] sd 0:0:0:0: [sda] Write Protect is off
[ 4.695420] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.695444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.695509] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.695522] sd 0:0:0:0: [sda] Write Protect is off
[ 4.695525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.695548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.695552] sda: sda1 sda2 < sda5 >
[ 4.776325] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.816704] ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX03, max UDMA/33
[ 4.832586] ata4.00: configured for UDMA/33
[ 5.002955] scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX03 PQ: 0 ANSI: 5
[ 5.003145] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 5.026052] Driver 'sr' needs updating - please use bus_type methods
[ 5.036178] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.036184] Uniform CD-ROM driver Revision: 3.20
[ 5.036315] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 5.231241] PM: Starting manual resume from disk
[ 5.231245] PM: Resume from partition 8:5
[ 5.231246] PM: Checking hibernation image.
[ 5.231490] PM: Resume from disk failed.
[ 5.303524] kjournald starting. Commit interval 5 seconds
[ 5.303549] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.924653] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f75bc40024e]
[ 12.090779] udevd version 124 started
[ 12.409119] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.421153] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.542627] Linux agpgart interface v0.103
[ 12.629196] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 12.664469] ACPI: Power Button (FF) [PWRF]
[ 12.664623] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 12.664701] ACPI: Lid Switch [LID0]
[ 12.664775] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 12.685039] ACPI: Power Button (CM) [PWRB]
[ 12.685227] ACPI: WMI: Mapper loaded
[ 12.741916] agpgart-intel 0000:00:00.0: Intel 965GM Chipset
[ 12.742401] agpgart-intel 0000:00:00.0: detected 7676K stolen memory
[ 12.744880] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 12.928984] acpi device:0a: registered as cooling_device2
[ 12.929378] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/input/input5
[ 12.955830] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.961036] ACPI: AC Adapter [ACAD] (off-line)
[ 12.980687] ACPI: Battery Slot [BAT1] (battery present)
[ 13.236160] Bluetooth: Core ver 2.13
[ 13.284751] NET: Registered protocol family 31
[ 13.284756] Bluetooth: HCI device and connection manager initialized
[ 13.284761] Bluetooth: HCI socket layer initialized
[ 13.331817] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.337742] usbcore: registered new interface driver btusb
[ 13.372763] Linux video capture interface: v2.00
[ 13.582736] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 13.582777] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.613902] hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
[ 13.633152] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 13.633155] ricoh-mmc: Copyright(c) Philip Langdale
[ 13.689214] ricoh-mmc: Ricoh MMC controller found at 0000:0e:06.2 [1180:0843] (rev 12)
[ 13.689247] ricoh-mmc: Controller is now disabled.
[ 13.704223] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 13.708259] sdhci: Secure Digital Host Controller Interface driver
[ 13.708262] sdhci: Copyright(c) Pierre Ossman
[ 13.719905] sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
[ 13.719932] sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 13.720950] sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 13.723035] mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
[ 13.788482] iTCO_vendor_support: vendor-support=0
[ 13.876121] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
[ 13.877778] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb3/3-2/3-2:1.0/input/input7
[ 13.877953] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 13.964223] usbcore: registered new interface driver uvcvideo
[ 13.964247] USB Video Class driver (v0.1.0)
[ 14.066892] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 14.066895] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 14.067020] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 14.067055] iwlagn 0000:0c:00.0: setting latency timer to 64
[ 14.067146] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 14.114482] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 14.115821] iwlagn 0000:0c:00.0: PCI INT A disabled
[ 14.116293] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.031704] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input8
[ 16.040745] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 16.040828] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 17.102874] lp: driver loaded but no devices found
[ 17.288386] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k
[ 17.321041] EXT3 FS on sda1, internal journal
[ 17.804814] type=1505 audit(1247599345.890:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4269
[ 17.956458] type=1505 audit(1247599346.042:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4274
[ 17.956670] type=1505 audit(1247599346.042:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4274
[ 18.002572] type=1505 audit(1247599346.086:5): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=4278
[ 18.195003] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.876708] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.209194] apm: BIOS not found.
[ 22.485442] ppdev: user-space parallel port driver
[ 24.240236] NET: Registered protocol family 10
[ 24.241667] lo: Disabled Privacy Extensions
[ 27.999896] Bluetooth: L2CAP ver 2.11
[ 27.999909] Bluetooth: L2CAP socket layer initialized
[ 28.103762] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.103775] Bluetooth: BNEP filters: protocol multicast
[ 28.192457] Bluetooth: RFCOMM socket layer initialized
[ 28.193031] Bluetooth: RFCOMM TTY layer initialized
[ 28.193044] Bluetooth: RFCOMM ver 1.10
[ 28.205985] Bridge firewalling registered
[ 28.246570] Bluetooth: SCO (Voice Link) ver 0.6
[ 28.246582] Bluetooth: SCO socket layer initialized
[ 32.488510] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.493126] iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 32.493329] iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x40100102, writing 0x40100106)
[ 32.496904] firmware: requesting iwlwifi-4965-2.ucode
[ 32.788181] Registered led device: iwl-phy0:radio
[ 32.788683] Registered led device: iwl-phy0:assoc
[ 32.789092] Registered led device: iwl-phy0:RX
[ 32.790075] Registered led device: iwl-phy0:TX
[ 32.813355] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 32.862390] [drm] Initialized drm 1.1.0 20060810
[ 32.874951] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 32.874959] pci 0000:00:02.0: setting latency timer to 64
[ 32.875778] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 32.912724] NET: Registered protocol family 17
[ 50.605032] CE: hpet increasing min_delta_ns to 15000 nsec
[ 84.529707] CPU0 attaching NULL sched-domain.
[ 84.529721] CPU1 attaching NULL sched-domain.
[ 84.532141] CPU0 attaching sched-domain:
[ 84.532147] domain 0: span 0-1 level MC
[ 84.532152] groups: 0 1
[ 84.532160] domain 1: span 0-1 level CPU
[ 84.532164] groups: 0-1
[ 84.532171] CPU1 attaching sched-domain:
[ 84.532175] domain 0: span 0-1 level MC
[ 84.532178] groups: 1 0
[ 84.532185] domain 1: span 0-1 level CPU
[ 84.532189] groups: 0-1
[ 89.386047] wlan0: authenticate with AP 00:13:33:17:ea:82
[ 89.387875] wlan0: authenticated
[ 89.387889] wlan0: associate with AP 00:13:33:17:ea:82
[ 89.390044] wlan0: RX AssocResp from 00:13:33:17:ea:82 (capab=0x411 status=0 aid=1)
[ 89.390056] wlan0: associated
[ 89.397637] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 99.532159] wlan0: no IPv6 routers present
[ 264.000064] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1559.919903] CPU0 attaching NULL sched-domain.
[ 1559.919912] CPU1 attaching NULL sched-domain.
[ 1559.924147] CPU0 attaching sched-domain:
[ 1559.924154] domain 0: span 0-1 level MC
[ 1559.924159] groups: 0 1
[ 1559.924168] CPU1 attaching sched-domain:
[ 1559.924171] domain 0: span 0-1 level MC
[ 1559.924175] groups: 1 0
[ 1568.933057] usb 7-1: new high speed USB device using ehci_hcd and address 2
[ 1569.599982] usb 7-1: configuration #1 chosen from 1 choice[code][code][/code][/code]

[logari81]

τώρα μπερδευτηκα λιγο, βλέπω όμως ότι εχεις και μια webcam συνδεμενη. Βγάλτην και αυτήν ασε μονο τον DVD EZMaker USB Gold συνδεμενο (σε κανονική θυρα usb κι οχι σε hub), κανε επανεκκίνηση και δωσε μας ξανα τα αποτελεσματα των

Κώδικας: Επιλογή όλων

lsusb
dmesg