Pinnacle HYBRID Pro PCI drivers

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό ALdaperan » 12 Απρ 2010, 19:20

καλησπέρα σας ... έχω τη Pinnacle HYBRID Pro PCI καρτα τηλεόρασης : http://www.dclstore.co.uk/images/produc ... 7-21-l.jpg υπάρχει περίπτωση να δουλέψει σε λίνουξ ? αν ναι τι πρέπει να κάνω ? :angel:
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό logari81 » 13 Απρ 2010, 00:38

βασικα αν ειναι να δουλευει δεν θα πρεπει να κανεις τιποτα. Απλως να εγκαταστησεις καποιο προγραμμα που θα την χρησιμοποιεί, π.χ. tvtime, xawtv, vlc κτλ.

Αν δεν δουλευει τότε μπορεις να ποσταρεις τα αποτελέσματα των εντολών
Κώδικας: Επιλογή όλων
lspci -nn
dmesg

Για να δουμε αν χρειάζεται καποια ιδιαίτερη ρύθμιση. Φυσικα υπάρχει και το ενδεχόμενο να μην δουλέψει καν.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό ALdaperan » 13 Απρ 2010, 10:50

Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48]
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20]
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442]
01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2)
05:02.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70)




Κώδικας: Επιλογή όλων
[    1.983065] Freeing unused kernel memory: 544k freed
[    1.983266] Write protecting the kernel text: 4584k
[    1.983294] Write protecting the kernel read-only data: 1840k
[    2.053803] Linux agpgart interface v0.103
[    2.093580] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    2.095408] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.095416] ATL1E 0000:02:00.0: setting latency timer to 64
[    2.114656] Initializing USB Mass Storage driver...
[    2.114724] scsi6 : SCSI emulation for USB Mass Storage devices
[    2.116966] usb-storage: device found at 2
[    2.116967] usb-storage: waiting for device to settle before scanning
[    2.116986] scsi7 : SCSI emulation for USB Mass Storage devices
[    2.117062] usbcore: registered new interface driver usb-storage
[    2.117063] USB Mass Storage support registered.
[    2.117160] usb-storage: device found at 4
[    2.117161] usb-storage: waiting for device to settle before scanning
[    2.137673] usb 6-2: configuration #1 chosen from 1 choice
[    2.150539] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febfe000-febfe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    2.175905] usbcore: registered new interface driver hiddev
[    2.189667] generic-usb 0003:0665:5161.0001: hiddev96,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2/input0
[    2.189682] usbcore: registered new interface driver usbhid
[    2.189685] usbhid: v2.6:USB HID core driver
[    2.412511] usb 7-2: new full speed USB device using uhci_hcd and address 2
[    2.610767] usb 7-2: configuration #1 chosen from 1 choice
[    2.852008] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    2.916041] PM: Starting manual resume from disk
[    2.916043] PM: Resume from partition 8:3
[    2.916045] PM: Checking hibernation image.
[    2.916197] PM: Resume from disk failed.
[    2.956475] kjournald starting.  Commit interval 5 seconds
[    2.956482] EXT3-fs: mounted filesystem with ordered data mode.
[    3.036905] usb 8-1: configuration #1 chosen from 1 choice
[    3.056075] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    3.056120] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0
[    3.146833] microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[    3.194973] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    3.195032] microsoft 0003:045E:00F9.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1
[    3.428579] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00015fd8da]
[    3.534781] type=1505 audit(1271089131.215:2): operation="profile_load" pid=467 name=/usr/share/gdm/guest-session/Xsession
[    3.547631] type=1505 audit(1271089131.227:3): operation="profile_load" pid=468 name=/sbin/dhclient3
[    3.548216] type=1505 audit(1271089131.227:4): operation="profile_load" pid=468 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.548477] type=1505 audit(1271089131.227:5): operation="profile_load" pid=468 name=/usr/lib/connman/scripts/dhclient-script
[    3.569945] type=1505 audit(1271089131.251:6): operation="profile_load" pid=469 name=/usr/bin/evince
[    3.577627] type=1505 audit(1271089131.259:7): operation="profile_load" pid=469 name=/usr/bin/evince-previewer
[    3.582171] type=1505 audit(1271089131.263:8): operation="profile_load" pid=469 name=/usr/bin/evince-thumbnailer
[    3.598662] type=1505 audit(1271089131.279:9): operation="profile_load" pid=471 name=/usr/lib/cups/backend/cups-pdf
[    3.599315] type=1505 audit(1271089131.279:10): operation="profile_load" pid=471 name=/usr/sbin/cupsd
[    7.116182] usb-storage: device scan complete
[    7.116288] usb-storage: device scan complete
[    7.118802] scsi 7:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[    7.151548] scsi 6:0:0:0: Direct-Access     WD       2500JB External  0107 PQ: 0 ANSI: 0
[    7.151827] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    7.151907] sd 7:0:0:0: Attached scsi generic sg3 type 0
[    7.152405] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    7.153278] sd 6:0:0:0: [sdb] Write Protect is off
[    7.153281] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    7.153283] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.154651] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.154654]  sdb: sdb1
[    7.156902] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    7.156905] sd 6:0:0:0: [sdb] Attached SCSI disk
[    7.158275] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[   13.914840] udev: starting version 147
[   13.929395] Adding 2562356k swap on /dev/sda3.  Priority:-1 extents:1 across:2562356k
[   13.972723] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[   13.972740] usbcore: registered new interface driver usblp
[   13.990864] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[   13.990867] Disabling lock debugging due to kernel taint
[   14.038330] EXT3 FS on sda2, internal journal
[   14.047075] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[   14.047250] [fglrx]   vendor: 1002 device: 9442 count: 1
[   14.047570] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[   14.047581] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   14.047585] pci 0000:01:00.0: setting latency timer to 64
[   14.047753] [fglrx] Kernel PAT support is enabled
[   14.047769] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[   14.058428] Linux video capture interface: v2.00
[   14.065691] gspca: main v2.6.0 registered
[   14.066322] gspca: probing 046d:08ad
[   14.078564] ip_tables: (C) 2000-2006 Netfilter Core Team
[   14.081642] lp: driver loaded but no devices found
[   14.090988] saa7130/34: v4l2 driver version 0.2.15 loaded
[   14.091025] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   14.091030] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[   14.091035] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[   14.091048] saa7133[0]: board init: gpio is 600e000
[   14.091054] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   14.116436]   alloc irq_desc for 22 on node -1
[   14.116439]   alloc kstat_irqs on node -1
[   14.116443] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   14.116464] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   14.187607] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[   14.190228] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   14.190250] HDA Intel 0000:01:00.1: setting latency timer to 64
[   14.240508] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   14.240520] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[   14.240530] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[   14.240541] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[   14.240551] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240562] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240572] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240582] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240593] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240603] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240613] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240624] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240634] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240644] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240654] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240670] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   14.240678] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[   14.300583] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[   14.380519] tda829x 0-004b: setting tuner address to 61
[   14.427399] __ratelimit: 3 callbacks suppressed
[   14.427402] type=1505 audit(1271078342.107:12): operation="profile_replace" pid=960 name=/usr/share/gdm/guest-session/Xsession
[   14.428488] type=1505 audit(1271078342.111:13): operation="profile_replace" pid=961 name=/sbin/dhclient3
[   14.429012] type=1505 audit(1271078342.111:14): operation="profile_replace" pid=961 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   14.429278] type=1505 audit(1271078342.111:15): operation="profile_replace" pid=961 name=/usr/lib/connman/scripts/dhclient-script
[   14.431685] type=1505 audit(1271078342.111:16): operation="profile_replace" pid=962 name=/usr/bin/evince
[   14.439533] type=1505 audit(1271078342.119:17): operation="profile_replace" pid=962 name=/usr/bin/evince-previewer
[   14.444886] type=1505 audit(1271078342.127:18): operation="profile_replace" pid=962 name=/usr/bin/evince-thumbnailer
[   14.448508] tda829x 0-004b: type set to tda8290+75a
[   14.450932] type=1505 audit(1271078342.131:19): operation="profile_replace" pid=964 name=/usr/lib/cups/backend/cups-pdf
[   14.451493] type=1505 audit(1271078342.131:20): operation="profile_replace" pid=964 name=/usr/sbin/cupsd
[   14.453040] type=1505 audit(1271078342.135:21): operation="profile_replace" pid=965 name=/usr/sbin/tcpdump
[   14.595802]   alloc irq_desc for 28 on node -1
[   14.595805]   alloc kstat_irqs on node -1
[   14.595817] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[   14.596024] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   14.596160] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   14.596278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   14.935830] ppdev: user-space parallel port driver
[   15.839909] zc3xx: probe 2wr ov vga 0x0000
[   15.883906] zc3xx: probe sensor -> 0011
[   15.883908] zc3xx: Find Sensor HV7131R(c)
[   15.887960] gspca: probe ok
[   15.887988] gspca: probing 046d:08ad
[   15.888100] gspca: probing 046d:08ad
[   15.888118] usbcore: registered new interface driver zc3xx
[   15.888120] zc3xx: registered
[   15.889146] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   15.923192] usbcore: registered new interface driver snd-usb-audio
[   18.305870] input: i2c IR (Pinnacle PCTV) as /devices/virtual/input/input6
[   18.305907] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
[   18.368044] saa7133[0]: registered device video1 [v4l2]
[   18.368070] saa7133[0]: registered device vbi0
[   18.368092] saa7133[0]: registered device radio0
[   18.371186] saa7134 ALSA driver for DMA sound loaded
[   18.371194] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   18.371208] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[   18.415362] dvb_init() allocating 1 frontend
[   18.580080] DVB: registering new adapter (saa7133[0])
[   18.580084] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   18.812007] tda1004x: setting up plls for 48MHz sampling clock
[   19.096006] tda1004x: found firmware revision 29 -- ok
[   21.281762]   alloc irq_desc for 29 on node -1
[   21.281764]   alloc kstat_irqs on node -1
[   21.281773] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[   21.282179] [fglrx] Firegl kernel thread PID: 1669
[   22.893997] [fglrx] Gart USWC size:627 M.
[   22.894000] [fglrx] Gart cacheable size:247 M.
[   22.894003] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   22.894005] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[   22.894007] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[   22.920014] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   23.134244] CPU0 attaching NULL sched-domain.
[   23.134248] CPU1 attaching NULL sched-domain.
[   23.152039] CPU0 attaching sched-domain:
[   23.152041]  domain 0: span 0-1 level MC
[   23.152043]   groups: 0 1
[   23.152046]   domain 1: span 0-1 level CPU
[   23.152048]    groups: 0-1 (__cpu_power = 2048)
[   23.152051] CPU1 attaching sched-domain:
[   23.152053]  domain 0: span 0-1 level MC
[   23.152054]   groups: 1 0
[   23.152057]   domain 1: span 0-1 level CPU
[   23.152058]    groups: 0-1 (__cpu_power = 2048)
[   24.676521] eth0: no IPv6 routers present
[   25.712555] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   31.936009] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   32.122404] CPU0 attaching NULL sched-domain.
[   32.122407] CPU1 attaching NULL sched-domain.
[   32.140540] CPU0 attaching sched-domain:
[   32.140543]  domain 0: span 0-1 level MC
[   32.140545]   groups: 0 1
[   32.140548] CPU1 attaching sched-domain:
[   32.140550]  domain 0: span 0-1 level MC
[   32.140551]   groups: 1 0
[  532.860009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[  532.968006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[  827.636014] usb 1-2: new high speed USB device using ehci_hcd and address 2
[  827.954109] usb 1-2: configuration #1 chosen from 1 choice
[  828.044037] cfg80211: Calling CRDA to update world regulatory domain
[  828.142481] cfg80211: World regulatory domain updated:
[  828.142483]    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  828.142485]    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  828.142487]    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  828.142489]    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  828.142491]    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  828.142492]    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  828.454955] phy0: Selected rate control algorithm 'minstrel'
[  828.455428] Registered led device: rt73usb-phy0::radio
[  828.455439] Registered led device: rt73usb-phy0::assoc
[  828.455451] Registered led device: rt73usb-phy0::quality
[  828.455875] usbcore: registered new interface driver rt73usb
[  828.522818] rt73usb 1-2:1.0: firmware: requesting rt73.bin
[  828.655487] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  960.836197] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[  961.036012] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[  961.042076] wlan0: authenticated
[  961.042079] wlan0: associate with AP 00:1f:9f:d4:1e:77
[  961.240009] wlan0: associate with AP 00:1f:9f:d4:1e:77
[  961.440511] wlan0: associate with AP 00:1f:9f:d4:1e:77
[  961.449549] wlan0: RX AssocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[  961.449552] wlan0: associated
[  961.463045] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  971.856005] wlan0: no IPv6 routers present
[  981.688017] wlan0: no probe response from AP 00:1f:9f:d4:1e:77 - disassociating
[  983.166567] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[  983.168470] wlan0: authenticated
[  983.168474] wlan0: associate with AP 00:1f:9f:d4:1e:77
[  983.170951] wlan0: RX ReassocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[  983.170954] wlan0: associated
[ 1086.280870] wlan0: disassociating by local choice (reason=3)
[ 1100.701102] usb 1-2: USB disconnect, address 2
[ 1100.701296] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1100.701300] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1100.701302] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1100.701305] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1100.701307] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1100.701312] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701373] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701390] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701408] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 2168.828006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 2168.936007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 3932.796007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 3932.904006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 4432.788007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 4432.896005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 7582.064012] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 7582.382050] usb 1-2: configuration #1 chosen from 1 choice
[ 7582.645690] phy1: Selected rate control algorithm 'minstrel'
[ 7582.646174] Registered led device: rt73usb-phy1::radio
[ 7582.646185] Registered led device: rt73usb-phy1::assoc
[ 7582.646196] Registered led device: rt73usb-phy1::quality
[ 7582.663015] udev: renamed network interface wlan0 to wlan1
[ 7582.665429] rt73usb 1-2:1.0: firmware: requesting rt73.bin
[ 7582.758879] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 7686.075067] wlan1: authenticate with AP 00:1f:9f:d4:1e:77
[ 7686.272010] wlan1: authenticate with AP 00:1f:9f:d4:1e:77
[ 7686.437799] wlan1: authenticated
[ 7686.437802] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.636009] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.836009] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.995142] wlan1: RX AssocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[ 7686.995146] wlan1: associated
[ 7687.016812] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 7698.008005] wlan1: no IPv6 routers present
[ 7832.070504] wlan1: disassociating by local choice (reason=3)
[ 7843.737086] usb 1-2: USB disconnect, address 3
[ 7843.737283] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 7843.737288] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 7843.737292] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 7843.737296] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 7843.737300] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 7843.737307] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737379] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737403] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737429] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 9150.960016] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 9151.094452] usb 1-2: configuration #1 chosen from 1 choice
[ 9151.096327] scsi8 : SCSI emulation for USB Mass Storage devices
[ 9151.096407] usb-storage: device found at 4
[ 9151.096408] usb-storage: waiting for device to settle before scanning
[ 9156.096712] usb-storage: device scan complete
[ 9156.097203] scsi 8:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[ 9156.097774] scsi 8:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[ 9156.098092] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 9156.118066] sd 8:0:0:0: [sdd] 8015502 512-byte logical blocks: (4.10 GB/3.82 GiB)
[ 9156.119555] sd 8:0:0:0: [sdd] Write Protect is off
[ 9156.119557] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 9156.119559] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.121188] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 9156.121270] sr 8:0:0:1: Attached scsi CD-ROM sr1
[ 9156.121332] sr 8:0:0:1: Attached scsi generic sg5 type 5
[ 9156.129179] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.129184]  sdd: sdd1
[ 9156.136436] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.136441] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 9156.318882] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9156.346628] ISOFS: changing to secondary root
[11314.388019] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[11314.496011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[11390.113154] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[11420.321890] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[11420.323931] SGI XFS Quota Management subsystem
[11420.341845] JFS: nTxBlock = 8192, nTxLock = 65536
[11420.364120] NTFS driver 2.1.29 [Flags: R/O MODULE].
[11420.390734] QNX4 filesystem 0.2.3 registered.
[12130.372011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[12130.480006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[13131.352011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[13131.460012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[14848.320010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[14848.428008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[15965.296012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[15965.404009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[18090.256028] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[18090.364199] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[22355.176010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[22355.284010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[25114.124007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[25114.232005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[25873.112009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[25873.220005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[26514.096025] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[26514.204006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[28214.064011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[28214.172011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[29863.100516] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[30171.028020] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[30171.136011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[30705.016008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[30705.124005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[33257.964008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[33258.072005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[35799.916009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[35800.024005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[37806.880007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[37806.988006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[38323.872008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[38323.980006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[41325.812009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[41325.920005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[43186.780007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[43186.888022] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[47818.692011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[47818.800007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[50724.632008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[50724.740007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[51652.616025] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[51652.724007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[53716.576008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[53716.684006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[54993.552007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[54993.660007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[59885.460009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[59885.568006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[62998.400006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[62998.508007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[65619.356013] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[65619.464012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[66395.299375] zc3xx: probe 2wr ov vga 0x0000
[66397.427242] zc3xx: probe 2wr ov vga 0x0000
[66399.659110] zc3xx: probe 2wr ov vga 0x0000
[66401.887969] zc3xx: probe 2wr ov vga 0x0000
[66404.091837] zc3xx: probe 2wr ov vga 0x0000
[66406.323694] zc3xx: probe 2wr ov vga 0x0000
[66408.555558] zc3xx: probe 2wr ov vga 0x0000
[66410.823418] zc3xx: probe 2wr ov vga 0x0000
[66413.047280] zc3xx: probe 2wr ov vga 0x0000
[66415.276144] zc3xx: probe 2wr ov vga 0x0000
[66417.496007] zc3xx: probe 2wr ov vga 0x0000
[66419.723869] zc3xx: probe 2wr ov vga 0x0000
[66421.979732] zc3xx: probe 2wr ov vga 0x0000
[66424.195595] zc3xx: probe 2wr ov vga 0x0000
[66426.415457] zc3xx: probe 2wr ov vga 0x0000
[66428.655322] zc3xx: probe 2wr ov vga 0x0000
[66430.883179] zc3xx: probe 2wr ov vga 0x0000
[66433.139045] zc3xx: probe 2wr ov vga 0x0000
[66435.383904] zc3xx: probe 2wr ov vga 0x0000
[66437.607764] zc3xx: probe 2wr ov vga 0x0000
[66439.828629] zc3xx: probe 2wr ov vga 0x0000
[66442.040494] zc3xx: probe 2wr ov vga 0x0000
[66444.263360] zc3xx: probe 2wr ov vga 0x0000
[66446.491219] zc3xx: probe 2wr ov vga 0x0000
[66448.724083] zc3xx: probe 2wr ov vga 0x0000
[66450.955943] zc3xx: probe 2wr ov vga 0x0000
[66453.175806] zc3xx: probe 2wr ov vga 0x0000
[66455.392671] zc3xx: probe 2wr ov vga 0x0000
[66457.619533] zc3xx: probe 2wr ov vga 0x0000
[66459.855395] zc3xx: probe 2wr ov vga 0x0000
[66462.072262] zc3xx: probe 2wr ov vga 0x0000
[66464.325127] zc3xx: probe 2wr ov vga 0x0000
[66466.693969] zc3xx: probe 2wr ov vga 0x0000
[66469.031832] zc3xx: probe 2wr ov vga 0x0000
[66471.255696] zc3xx: probe 2wr ov vga 0x0000
[66473.463558] zc3xx: probe 2wr ov vga 0x0000
[66475.695415] zc3xx: probe 2wr ov vga 0x0000
[66477.915593] zc3xx: probe 2wr ov vga 0x0000
[66480.147145] zc3xx: probe 2wr ov vga 0x0000
[66482.376009] zc3xx: probe 2wr ov vga 0x0000
[66484.620452] zc3xx: probe 2wr ov vga 0x0000
[66486.831728] zc3xx: probe 2wr ov vga 0x0000
[66489.039593] zc3xx: probe 2wr ov vga 0x0000
[66491.260461] zc3xx: probe 2wr ov vga 0x0000
[66493.483318] zc3xx: probe 2wr ov vga 0x0000
[66495.704185] zc3xx: probe 2wr ov vga 0x0000
[66497.941044] zc3xx: probe 2wr ov vga 0x0000
[66500.179908] zc3xx: probe 2wr ov vga 0x0000
[66502.411770] zc3xx: probe 2wr ov vga 0x0000
[66504.619634] zc3xx: probe 2wr ov vga 0x0000
[66506.828498] zc3xx: probe 2wr ov vga 0x0000
[66509.059363] zc3xx: probe 2wr ov vga 0x0000
[66511.295222] zc3xx: probe 2wr ov vga 0x0000
[66513.523083] zc3xx: probe 2wr ov vga 0x0000
[66515.749947] zc3xx: probe 2wr ov vga 0x0000
[66517.963808] zc3xx: probe 2wr ov vga 0x0000
[66520.187672] zc3xx: probe 2wr ov vga 0x0000
[66522.484536] zc3xx: probe 2wr ov vga 0x0000
[66524.725395] zc3xx: probe 2wr ov vga 0x0000
[66526.967253] zc3xx: probe 2wr ov vga 0x0000
[66529.200119] zc3xx: probe 2wr ov vga 0x0000
[66531.455977] zc3xx: probe 2wr ov vga 0x0000
[66533.659843] zc3xx: probe 2wr ov vga 0x0000
[66535.884707] zc3xx: probe 2wr ov vga 0x0000
[66538.115566] zc3xx: probe 2wr ov vga 0x0000
[66540.328431] zc3xx: probe 2wr ov vga 0x0000
[66542.560294] zc3xx: probe 2wr ov vga 0x0000
[66544.771155] zc3xx: probe 2wr ov vga 0x0000
[66547.004020] zc3xx: probe 2wr ov vga 0x0000
[66549.227882] zc3xx: probe 2wr ov vga 0x0000
[66551.439747] zc3xx: probe 2wr ov vga 0x0000
[66553.655610] zc3xx: probe 2wr ov vga 0x0000
[66555.871473] zc3xx: probe 2wr ov vga 0x0000
[66558.103336] zc3xx: probe 2wr ov vga 0x0000
[66560.503187] zc3xx: probe 2wr ov vga 0x0000
[66562.743047] zc3xx: probe 2wr ov vga 0x0000
[66564.983909] zc3xx: probe 2wr ov vga 0x0000
[66567.191776] zc3xx: probe 2wr ov vga 0x0000
[66569.447636] zc3xx: probe 2wr ov vga 0x0000
[66571.671501] zc3xx: probe 2wr ov vga 0x0000
[66573.899360] zc3xx: probe 2wr ov vga 0x0000
[66576.142225] zc3xx: probe 2wr ov vga 0x0000
[66578.405080] zc3xx: probe 2wr ov vga 0x0000
[66580.745940] zc3xx: probe 2wr ov vga 0x0000
[66583.005800] zc3xx: probe 2wr ov vga 0x0000
[66585.227664] zc3xx: probe 2wr ov vga 0x0000
[66587.455525] zc3xx: probe 2wr ov vga 0x0000
[66589.688390] zc3xx: probe 2wr ov vga 0x0000
[66591.924246] zc3xx: probe 2wr ov vga 0x0000
[66594.243108] zc3xx: probe 2wr ov vga 0x0000
[66596.483973] zc3xx: probe 2wr ov vga 0x0000
[66598.707832] zc3xx: probe 2wr ov vga 0x0000
[66600.931696] zc3xx: probe 2wr ov vga 0x0000
[66603.155558] zc3xx: probe 2wr ov vga 0x0000
[66605.407419] zc3xx: probe 2wr ov vga 0x0000
[66607.755271] zc3xx: probe 2wr ov vga 0x0000
[66610.048130] zc3xx: probe 2wr ov vga 0x0000
[66612.355987] zc3xx: probe 2wr ov vga 0x0000
[66614.659848] zc3xx: probe 2wr ov vga 0x0000
[66616.895716] zc3xx: probe 2wr ov vga 0x0000
[66619.189316] zc3xx: probe 2wr ov vga 0x0000
[66621.443431] zc3xx: probe 2wr ov vga 0x0000
[66623.684289] zc3xx: probe 2wr ov vga 0x0000
[66626.003148] zc3xx: probe 2wr ov vga 0x0000
[66628.228011] zc3xx: probe 2wr ov vga 0x0000
[66630.495871] zc3xx: probe 2wr ov vga 0x0000
[66632.711731] zc3xx: probe 2wr ov vga 0x0000
[66634.923604] zc3xx: probe 2wr ov vga 0x0000
[66637.155460] zc3xx: probe 2wr ov vga 0x0000
[66639.412322] zc3xx: probe 2wr ov vga 0x0000
[66641.724186] zc3xx: probe 2wr ov vga 0x0000
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό logari81 » 13 Απρ 2010, 12:11

ALdaperan έγραψε:[ 18.368044] saa7133[0]: registered device video1 [v4l2]

λογικα δουλευει. Όρισε στο tvtime ως πηγη το /dev/video1 και λογικά θα δεις την εικονα που θελεις. Αν δεν ειχες την webcam συνδεμενη θα οριζοταν η καρτα τηλεόρασης ως /dev/video0 και θα την εβλεπες κατευθειαν στο tvtime. Επειδη ομως εχεις συνδεμενη και την webcam θα πρεπει να ορισεις την εισοδο εσύ.
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό ALdaperan » 13 Απρ 2010, 12:54

έβγαλα τη καμερα και μου δείχνει αυτο εδώ :
Τελευταία επεξεργασία από logari81 και 13 Απρ 2010, 14:53, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: διόρθωση BBCode
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό logari81 » 13 Απρ 2010, 13:10

ALdaperan έγραψε:έβγαλα τη καμερα και μου δείχνει αυτο εδώ :

εκανες επανεκκινηση μετα; Τσεκαρες στο αποτελεσμα του dmesg αν αλλαξε το
[ 18.368044] saa7133[0]: registered device video1 [v4l2]

σε
video0 ;
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό ALdaperan » 13 Απρ 2010, 13:31

έκανα επανεκκινηση ... δε τη βρίσκω καν αυτη τη γραμμη τώρα , παίρνω το παρακάτω

Κώδικας: Επιλογή όλων
[    0.253440] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.253545] TCP: Hash tables configured (established 131072 bind 65536)
[    0.253546] TCP reno registered
[    0.253589] NET: Registered protocol family 1
[    0.253622] Trying to unpack rootfs image as initramfs...
[    0.382656] Freeing initrd memory: 7717k freed
[    0.384977] cpufreq-nforce2: No nForce2 chipset.
[    0.385005] Scanning for low memory corruption every 60 seconds
[    0.385078] audit: initializing netlink socket (disabled)
[    0.385091] type=2000 audit(1271165153.383:1): initialized
[    0.390823] highmem bounce pool size: 64 pages
[    0.390826] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.391776] VFS: Disk quotas dquot_6.5.2
[    0.391815] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.392185] fuse init (API version 7.12)
[    0.392237] msgmni has been set to 1705
[    0.392383] alg: No test for stdrng (krng)
[    0.392392] io scheduler noop registered
[    0.392394] io scheduler anticipatory registered
[    0.392395] io scheduler deadline registered
[    0.392421] io scheduler cfq registered (default)
[    0.392531] pci 0000:01:00.0: Boot video device
[    0.392614]   alloc irq_desc for 24 on node -1
[    0.392615]   alloc kstat_irqs on node -1
[    0.392622] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[    0.392627] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.392696]   alloc irq_desc for 25 on node -1
[    0.392698]   alloc kstat_irqs on node -1
[    0.392703] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[    0.392709] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.392791]   alloc irq_desc for 26 on node -1
[    0.392792]   alloc kstat_irqs on node -1
[    0.392797] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[    0.392803] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    0.392888]   alloc irq_desc for 27 on node -1
[    0.392889]   alloc kstat_irqs on node -1
[    0.392894] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[    0.392900] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[    0.392962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.393033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.393125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.393128] ACPI: Power Button [PWRF]
[    0.393168] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.393170] ACPI: Power Button [PWRB]
[    0.393388] processor LNXCPU:00: registered as cooling_device0
[    0.393414] processor LNXCPU:01: registered as cooling_device1
[    0.395023] isapnp: Scanning for PnP cards...
[    0.501631] Switched to high resolution mode on CPU 1
[    0.503971] Switched to high resolution mode on CPU 0
[    0.747763] isapnp: No Plug & Play device found
[    0.748492] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.748578] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.748877] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.749539] brd: module loaded
[    0.749825] loop: module loaded
[    0.749872] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.749921] ahci 0000:03:00.0: version 3.0
[    0.749949] ata_piix 0000:00:1f.2: version 2.13
[    0.749960]   alloc irq_desc for 19 on node -1
[    0.749961]   alloc kstat_irqs on node -1
[    0.749965] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.749968] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.750002] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.750041] scsi0 : ata_piix
[    0.750087] scsi1 : ata_piix
[    0.751018] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[    0.751022] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[    0.751038] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.751043] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.751069] ata_piix 0000:00:1f.5: setting latency timer to 64
[    0.751097] scsi2 : ata_piix
[    0.751132] scsi3 : ata_piix
[    0.751897] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[    0.751900] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[    0.752186] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.752206] pata_marvell 0000:03:00.0: setting latency timer to 64
[    0.752248] scsi4 : pata_marvell
[    0.752298] scsi5 : pata_marvell
[    0.752322] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[    0.752324] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[    0.752644] Fixed MDIO Bus: probed
[    0.752665] PPP generic driver version 2.4.2
[    0.752720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.752731]   alloc irq_desc for 18 on node -1
[    0.752732]   alloc kstat_irqs on node -1
[    0.752735] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.752741] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.752744] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.752762] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.756652] ehci_hcd 0000:00:1a.7: debug port 1
[    0.756656] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    0.756665] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[    0.772006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.772079] usb usb1: configuration #1 chosen from 1 choice
[    0.772105] hub 1-0:1.0: USB hub found
[    0.772111] hub 1-0:1.0: 6 ports detected
[    0.772161]   alloc irq_desc for 23 on node -1
[    0.772163]   alloc kstat_irqs on node -1
[    0.772167] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.772175] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.772178] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.772203] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.776093] ehci_hcd 0000:00:1d.7: debug port 1
[    0.776097] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.776106] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[    0.788008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.788065] usb usb2: configuration #1 chosen from 1 choice
[    0.788089] hub 2-0:1.0: USB hub found
[    0.788098] hub 2-0:1.0: 6 ports detected
[    0.788148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.788164] uhci_hcd: USB Universal Host Controller Interface driver
[    0.788181] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.788191] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.788193] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.788214] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.788232] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    0.788282] usb usb3: configuration #1 chosen from 1 choice
[    0.788298] hub 3-0:1.0: USB hub found
[    0.788303] hub 3-0:1.0: 2 ports detected
[    0.788331]   alloc irq_desc for 21 on node -1
[    0.788332]   alloc kstat_irqs on node -1
[    0.788335] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.788339] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.788341] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.788360] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.788384] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[    0.788433] usb usb4: configuration #1 chosen from 1 choice
[    0.788449] hub 4-0:1.0: USB hub found
[    0.788453] hub 4-0:1.0: 2 ports detected
[    0.788482] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.788486] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[    0.788488] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    0.788505] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    0.788523] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[    0.788570] usb usb5: configuration #1 chosen from 1 choice
[    0.788585] hub 5-0:1.0: USB hub found
[    0.788589] hub 5-0:1.0: 2 ports detected
[    0.788619] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.788623] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.788625] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.788642] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    0.788660] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[    0.788707] usb usb6: configuration #1 chosen from 1 choice
[    0.788723] hub 6-0:1.0: USB hub found
[    0.788727] hub 6-0:1.0: 2 ports detected
[    0.788758] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.788762] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.788764] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.788785] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    0.788802] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[    0.788850] usb usb7: configuration #1 chosen from 1 choice
[    0.788870] hub 7-0:1.0: USB hub found
[    0.788874] hub 7-0:1.0: 2 ports detected
[    0.788900] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.788906] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.788908] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.788925] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    0.788943] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[    0.788990] usb usb8: configuration #1 chosen from 1 choice
[    0.789008] hub 8-0:1.0: USB hub found
[    0.789012] hub 8-0:1.0: 2 ports detected
[    0.789076] PNP: No PS/2 controller found. Probing ports directly.
[    0.791281] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.791285] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.791318] mice: PS/2 mouse device common for all mice
[    0.791386] rtc_cmos 00:03: RTC can wake from S4
[    0.791405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.791424] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.791487] device-mapper: uevent: version 1.0.3
[    0.791537] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.791580] device-mapper: multipath: version 1.1.0 loaded
[    0.791581] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.791652] EISA: Probing bus 0 at eisa.0
[    0.791673] EISA: Detected 0 cards.
[    0.791722] cpuidle: using governor ladder
[    0.791724] cpuidle: using governor menu
[    0.792038] TCP cubic registered
[    0.792140] NET: Registered protocol family 10
[    0.792442] lo: Disabled Privacy Extensions
[    0.792657] NET: Registered protocol family 17
[    0.792669] Bluetooth: L2CAP ver 2.13
[    0.792670] Bluetooth: L2CAP socket layer initialized
[    0.792672] Bluetooth: SCO (Voice Link) ver 0.6
[    0.792672] Bluetooth: SCO socket layer initialized
[    0.792690] Bluetooth: RFCOMM TTY layer initialized
[    0.792692] Bluetooth: RFCOMM socket layer initialized
[    0.792693] Bluetooth: RFCOMM ver 1.11
[    0.792711] Using IPI No-Shortcut mode
[    0.792747] PM: Resume from disk failed.
[    0.792753] registered taskstats version 1
[    0.792837]   Magic number: 6:715:432
[    0.792877] rtc_cmos 00:03: setting system clock to 2010-04-13 13:25:54 UTC (1271165154)
[    0.792879] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.792880] EDD information not available.
[    1.078525] ata4: SATA link down (SStatus 0 SControl 300)
[    1.089028] ata3: SATA link down (SStatus 0 SControl 300)
[    1.089044] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    1.222633] usb 1-2: configuration #1 chosen from 1 choice
[    1.332009] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    1.468450] usb 2-1: configuration #1 chosen from 1 choice
[    1.564052] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.564064] ata2.01: SATA link down (SStatus 0 SControl 300)
[    1.564074] ata2.01: link offline, clearing class 3 to NONE
[    1.564232] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.564241] ata1.01: SATA link down (SStatus 0 SControl 300)
[    1.572338] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[    1.572340] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.572472] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[    1.588349] ata1.00: configured for UDMA/133
[    1.588423] scsi 0:0:0:0: Direct-Access     ATA      WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[    1.588498] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.588526] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    1.588555] sd 0:0:0:0: [sda] Write Protect is off
[    1.588557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.588572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.588650]  sda:
[    1.588740] ata2.00: configured for UDMA/100
[    1.589632] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW SH-S223F  SB00 PQ: 0 ANSI: 5
[    1.591226]  sda1 sda2 sda3
[    1.593131] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.593135] Uniform CD-ROM driver Revision: 3.20
[    1.593202] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.593238] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.628689] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.636509] usb 2-3: new high speed USB device using ehci_hcd and address 4
[    1.759070] Freeing unused kernel memory: 544k freed
[    1.759277] Write protecting the kernel text: 4584k
[    1.759305] Write protecting the kernel read-only data: 1840k
[    1.784077] usb 2-3: configuration #1 chosen from 1 choice
[    1.830213] Linux agpgart interface v0.103
[    1.860877] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    1.860888] ATL1E 0000:02:00.0: setting latency timer to 64
[    1.882591] Initializing USB Mass Storage driver...
[    1.882657] scsi6 : SCSI emulation for USB Mass Storage devices
[    1.882762] scsi7 : SCSI emulation for USB Mass Storage devices
[    1.882849] scsi8 : SCSI emulation for USB Mass Storage devices
[    1.882921] usbcore: registered new interface driver usb-storage
[    1.882923] USB Mass Storage support registered.
[    1.884271] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    1.889273] usb-storage: device found at 4
[    1.889275] usb-storage: waiting for device to settle before scanning
[    1.889280] usb-storage: device found at 2
[    1.889281] usb-storage: waiting for device to settle before scanning
[    1.889285] usb-storage: device found at 2
[    1.889286] usb-storage: waiting for device to settle before scanning
[    1.942517] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[febfe000-febfe7ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
[    2.092010] usb 6-2: new low speed USB device using uhci_hcd and address 2
[    2.269751] usb 6-2: configuration #1 chosen from 1 choice
[    2.301579] usbcore: registered new interface driver hiddev
[    2.314723] generic-usb 0003:0665:5161.0001: hiddev96,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2/input0
[    2.314733] usbcore: registered new interface driver usbhid
[    2.314734] usbhid: v2.6:USB HID core driver
[    2.556009] usb 8-1: new low speed USB device using uhci_hcd and address 2
[    2.668987] xor: automatically using best checksumming function: pIII_sse
[    2.688503]    pIII_sse  : 11489.000 MB/sec
[    2.688504] xor: using function: pIII_sse (11489.000 MB/sec)
[    2.690081] device-mapper: dm-raid45: initialized v0.2594b
[    2.749028] usb 8-1: configuration #1 chosen from 1 choice
[    2.767190] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[    2.767226] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0
[    2.857982] microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[    2.906113] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[    2.906174] microsoft 0003:045E:00F9.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1
[    2.963821] PM: Starting manual resume from disk
[    2.963824] PM: Resume from partition 8:3
[    2.963825] PM: Checking hibernation image.
[    2.963984] PM: Resume from disk failed.
[    2.991712] kjournald starting.  Commit interval 5 seconds
[    2.991717] EXT3-fs: mounted filesystem with ordered data mode.
[    3.220120] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[001e8c00015fd8da]
[    3.561701] type=1505 audit(1271165157.267:2): operation="profile_load" pid=455 name=/usr/share/gdm/guest-session/Xsession
[    3.574584] type=1505 audit(1271165157.279:3): operation="profile_load" pid=456 name=/sbin/dhclient3
[    3.575163] type=1505 audit(1271165157.279:4): operation="profile_load" pid=456 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[    3.575423] type=1505 audit(1271165157.279:5): operation="profile_load" pid=456 name=/usr/lib/connman/scripts/dhclient-script
[    3.605197] type=1505 audit(1271165157.311:6): operation="profile_load" pid=457 name=/usr/bin/evince
[    3.612879] type=1505 audit(1271165157.319:7): operation="profile_load" pid=457 name=/usr/bin/evince-previewer
[    3.617423] type=1505 audit(1271165157.323:8): operation="profile_load" pid=457 name=/usr/bin/evince-thumbnailer
[    3.633946] type=1505 audit(1271165157.339:9): operation="profile_load" pid=459 name=/usr/lib/cups/backend/cups-pdf
[    3.634599] type=1505 audit(1271165157.339:10): operation="profile_load" pid=459 name=/usr/sbin/cupsd
[    4.456387] Adding 2562356k swap on /dev/sda3.  Priority:-1 extents:1 across:2562356k
[    4.617722] EXT3 FS on sda2, internal journal
[    5.511332] udev: starting version 147
[    6.308843] lp: driver loaded but no devices found
[    6.888188] usb-storage: device scan complete
[    6.888204] usb-storage: device scan complete
[    6.888354] usb-storage: device scan complete
[    6.888864] scsi 6:0:0:0: Direct-Access     SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[    6.889236] scsi 6:0:0:1: CD-ROM            SanDisk  U3 Cruzer Micro  3.27 PQ: 0 ANSI: 2
[    6.890923] scsi 8:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
[    6.923553] scsi 7:0:0:0: Direct-Access     WD       2500JB External  0107 PQ: 0 ANSI: 0
[    6.923827] sd 7:0:0:0: Attached scsi generic sg2 type 0
[    6.923907] sd 8:0:0:0: Attached scsi generic sg3 type 0
[    6.923986] sd 6:0:0:0: Attached scsi generic sg4 type 0
[    6.925594] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[    6.925673] sr 6:0:0:1: Attached scsi CD-ROM sr1
[    6.925705] sr 6:0:0:1: Attached scsi generic sg5 type 5
[    6.926216] sd 6:0:0:0: [sdd] 8015502 512-byte logical blocks: (4.10 GB/3.82 GiB)
[    6.926280] sd 7:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    6.926930] sd 6:0:0:0: [sdd] Write Protect is off
[    6.926932] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[    6.926934] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    6.928744] sd 7:0:0:0: [sdb] Write Protect is off
[    6.928746] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    6.928747] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    6.930154] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    6.930157]  sdb: sdb1
[    6.931903] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    6.932654] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[    6.932656] sd 7:0:0:0: [sdb] Attached SCSI disk
[    6.933479] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    6.933482]  sdd: sdd1
[    6.938967] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[    6.938971] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[    7.311666] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[    7.311669] Disabling lock debugging due to kernel taint
[    7.326477] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[    7.326645] [fglrx]   vendor: 1002 device: 9442 count: 1
[    7.326954] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[    7.326965] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    7.326969] pci 0000:01:00.0: setting latency timer to 64
[    7.327132] [fglrx] Kernel PAT support is enabled
[    7.327150] [fglrx] module loaded - fglrx 8.66.10 [Sep  3 2009] with 1 minors
[    7.393300] coretemp coretemp.0: Using relative temperature scale!
[    7.393328] coretemp coretemp.1: Using relative temperature scale!
[    7.740917] ip_tables: (C) 2000-2006 Netfilter Core Team
[    7.856716] Linux video capture interface: v2.00
[    8.122936]   alloc irq_desc for 22 on node -1
[    8.122939]   alloc kstat_irqs on node -1
[    8.122944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    8.122968] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.159214] saa7130/34: v4l2 driver version 0.2.15 loaded
[    8.159241] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    8.159246] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[    8.159251] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[    8.159258] saa7133[0]: board init: gpio is 600e000
[    8.159263] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[    8.197447] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[    8.197465] usbcore: registered new interface driver usblp
[    8.308504] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[    8.308512] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[    8.308519] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[    8.308526] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[    8.308533] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308540] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308547] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308554] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308561] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308568] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308575] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308581] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308588] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308595] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308602] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308609] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[    8.308617] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[    9.018969] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[    9.021594] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.021619] HDA Intel 0000:01:00.1: setting latency timer to 64
[    9.058952] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[    9.136007] tda829x 0-004b: setting tuner address to 61
[    9.256027]   alloc irq_desc for 28 on node -1
[    9.256030]   alloc kstat_irqs on node -1
[    9.256041] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[    9.256150] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[    9.256280] ADDRCONF(NETDEV_UP): eth0: link is not ready
[    9.256401] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.404509] tda829x 0-004b: type set to tda8290+75a
[   10.636725] __ratelimit: 3 callbacks suppressed
[   10.636728] type=1505 audit(1271154364.343:12): operation="profile_replace" pid=1150 name=/usr/share/gdm/guest-session/Xsession
[   10.637814] type=1505 audit(1271154364.343:13): operation="profile_replace" pid=1151 name=/sbin/dhclient3
[   10.638296] type=1505 audit(1271154364.343:14): operation="profile_replace" pid=1151 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[   10.638559] type=1505 audit(1271154364.343:15): operation="profile_replace" pid=1151 name=/usr/lib/connman/scripts/dhclient-script
[   10.640924] type=1505 audit(1271154364.347:16): operation="profile_replace" pid=1152 name=/usr/bin/evince
[   10.651015] type=1505 audit(1271154364.355:17): operation="profile_replace" pid=1152 name=/usr/bin/evince-previewer
[   10.655602] type=1505 audit(1271154364.359:18): operation="profile_replace" pid=1152 name=/usr/bin/evince-thumbnailer
[   10.663172] type=1505 audit(1271154364.367:19): operation="profile_replace" pid=1168 name=/usr/lib/cups/backend/cups-pdf
[   10.663734] type=1505 audit(1271154364.367:20): operation="profile_replace" pid=1168 name=/usr/sbin/cupsd
[   10.665676] type=1505 audit(1271154364.371:21): operation="profile_replace" pid=1170 name=/usr/sbin/tcpdump
[   12.812952] ppdev: user-space parallel port driver
[   13.325335] input: i2c IR (Pinnacle PCTV) as /devices/virtual/input/input6
[   13.325373] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
[   13.388585] saa7133[0]: registered device video0 [v4l2]
[   13.388605] saa7133[0]: registered device vbi0
[   13.388621] saa7133[0]: registered device radio0
[   13.401078] saa7134 ALSA driver for DMA sound loaded
[   13.401087] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[   13.401103] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[   13.521106] dvb_init() allocating 1 frontend
[   13.712592] DVB: registering new adapter (saa7133[0])
[   13.712596] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[   13.800803] tda1004x: setting up plls for 48MHz sampling clock
[   14.088006] tda1004x: found firmware revision 29 -- ok
[   14.479650] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[   17.401075]   alloc irq_desc for 29 on node -1
[   17.401078]   alloc kstat_irqs on node -1
[   17.401086] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[   17.401493] [fglrx] Firegl kernel thread PID: 1762
[   19.229544] [fglrx] Gart USWC size:627 M.
[   19.229546] [fglrx] Gart cacheable size:247 M.
[   19.229550] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[   19.229552] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[   19.229567] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[   20.168008] eth0: no IPv6 routers present
[   20.916012] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   21.300634] CPU0 attaching NULL sched-domain.
[   21.300638] CPU1 attaching NULL sched-domain.
[   21.320546] CPU0 attaching sched-domain:
[   21.320549]  domain 0: span 0-1 level MC
[   21.320552]   groups: 0 1
[   21.320556]   domain 1: span 0-1 level CPU
[   21.320559]    groups: 0-1 (__cpu_power = 2048)
[   21.320564] CPU1 attaching sched-domain:
[   21.320566]  domain 0: span 0-1 level MC
[   21.320568]   groups: 1 0
[   21.320572]   domain 1: span 0-1 level CPU
[   21.320574]    groups: 0-1 (__cpu_power = 2048)
[   26.781685] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[   29.916014] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[   30.080142] CPU0 attaching NULL sched-domain.
[   30.080145] CPU1 attaching NULL sched-domain.
[   30.096541] CPU0 attaching sched-domain:
[   30.096544]  domain 0: span 0-1 level MC
[   30.096547]   groups: 0 1
[   30.096552] CPU1 attaching sched-domain:
[   30.096554]  domain 0: span 0-1 level MC
[   30.096556]   groups: 1 0
[   46.750974] ISO 9660 Extensions: Microsoft Joliet Level 3
[   46.770841] ISOFS: changing to secondary root
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό logari81 » 13 Απρ 2010, 14:02

ALdaperan έγραψε:[ 13.388585] saa7133[0]: registered device video0 [v4l2]
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό ALdaperan » 13 Απρ 2010, 14:14

oups δε το είδα ... άρα τι πρέπει να κάνω? θελει μήπως κάποια ρύθμιση το tvtime? :wtf: :think:
Γνώσεις ⇛ Linux: Μέτριος | Προγραμματισμός: C | Αγγλικά: Μέτρια
Ubuntu 12.10 quantal 3.5.0-18-generic 32bit (en_US.UTF-8),
Intel Core2 Duo CPU E8400 3.00GHz ‖ RAM 2016 MiB ‖ ASUS INC. P5Q
AMD nee ATI RV770 [Radeon HD 4850] [1002:9442]
eth0: Atheros Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
Οδηγοί - How to - Tutorials | Οδηγοί Video | Οδηγίες για Αρχάριους στο Ubuntu | Γιατί το Linux είναι καλύτερο
Άβαταρ μέλους
ALdaperan
powerTUX
powerTUX
 
Δημοσιεύσεις: 2686
Εγγραφή: 27 Μαρ 2010, 21:07
Εκτύπωση

Re: Pinnacle HYBRID Pro PCI drivers

Δημοσίευσηαπό logari81 » 13 Απρ 2010, 14:51

τωρα το tvtime σου βγαζει το ιδιο μηνυμα με πριν;
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV