από qsd330 » 10 Ιουν 2015, 14:52
από Learner » 10 Ιουν 2015, 16:55
από qsd330 » 10 Ιουν 2015, 17:05
από Learner » 10 Ιουν 2015, 19:30
qsd330 έγραψε:και δεν μπορω να ρυθμισω σωστα με xrandr την τηλεοραση
qsd330 έγραψε:τεσπα το περασα και τα πραγματα εγειναν χειροτερα
sudo apt-get purge nvidia-*
sudo apt-get purge $(dpkg -l | awk '/^rc/ { print $2 }')
sudo rm /etc/X11/xorg*
sudo apt-get install nvidia-331-updates nvidia-settings
sudo nvidia-xconfig
από qsd330 » 10 Ιουν 2015, 20:28
q@q:~$ sudo nvidia-xconfig
WARNING: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'
q@q:~$
από Learner » 11 Ιουν 2015, 04:43
qsd330 έγραψε:ετσι θα επρεπε να ειναι??
qsd330 έγραψε:εκανα επανεκινηση τωρα εχασα και την αναλυση τησ tv . μου δινει μονο το 640*480 σαν επιλογη
από qsd330 » 11 Ιουν 2015, 09:41
από Learner » 11 Ιουν 2015, 18:43
qsd330 έγραψε:edit: αν χριεαζονται πιο δραστικα μετρα πειτε το.... upgrade ,επανεγκατασταση...κτλπ αλλα οχι φορματ
qsd330 έγραψε:custom πυρινα ειχα στα 13,10 αλλα δεν θυμαμε να εβαλα στα 14,04 ... μπορω να το δω αυτο καπως??
ls /boot
uname -rm
dmesg
cat /var/log/Xorg.0.log
lsmod
xrandr
lspci -nnk | grep -iA2 vga
Learner έγραψε:Αν ανοίξεις το nvidia settings σου έχει επιλογές για αλλαγή ανάλυσης...κλπ;
από qsd330 » 11 Ιουν 2015, 19:56
the following schema is missing
com.canonical.indicator.bluetoooth
q@q:~$ ls /boot
abi-3.13.0-46-generic initrd.img-3.13.0-54-generic
abi-3.13.0-53-generic memtest86+.bin
abi-3.13.0-54-generic memtest86+.elf
config-3.13.0-46-generic memtest86+_multiboot.bin
config-3.13.0-53-generic System.map-3.13.0-46-generic
config-3.13.0-54-generic System.map-3.13.0-53-generic
extlinux System.map-3.13.0-54-generic
grub vmlinuz-3.13.0-46-generic
initrd.img-3.13.0-46-generic vmlinuz-3.13.0-53-generic
initrd.img-3.13.0-53-generic vmlinuz-3.13.0-54-generic
q@q:~$ uname -rm
3.13.0-54-generic x86_64
από qsd330 » 11 Ιουν 2015, 19:58
q@q:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-54-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #91-Ubuntu SMP Tue May 26 19:15:08 UTC 2015 (Ubuntu 3.13.0-54.91-generic 3.13.11-ckt20)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-54-generic root=UUID=1eb0b5cb-6b68-466a-84dd-570b4319e1f2 ro quiet splash
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf491fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf492000-0x00000000bf4d8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4d9000-0x00000000bf4dffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e0000-0x00000000bf607fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf608000-0x00000000bf609fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf60a000-0x00000000bf619fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf61a000-0x00000000bf623fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf624000-0x00000000bf644fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf645000-0x00000000bf687fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf688000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: MEDIONPC MS-7707/MS-7707, BIOS E7707MLN.10E 04/01/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 3 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 3, base: 5112MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 4088M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 4 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 4GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 5112MB, range: 8MB, type UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fccd0-0x000fccdf] mapped at [ffff8800000fccd0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] BRK [0x01fe4000, 0x01fe4fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13f600000-0x13f7fffff]
[ 0.000000] [mem 0x13f600000-0x13f7fffff] page 2M
[ 0.000000] BRK [0x01fe5000, 0x01fe5fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13f5fffff]
[ 0.000000] [mem 0x13c000000-0x13f5fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf491fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbf3fffff] page 2M
[ 0.000000] [mem 0xbf400000-0xbf491fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbf608000-0xbf609fff]
[ 0.000000] [mem 0xbf608000-0xbf609fff] page 4k
[ 0.000000] BRK [0x01fe6000, 0x01fe6fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbf688000-0xbf7fffff]
[ 0.000000] [mem 0xbf688000-0xbf7fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x34c5c000-0x36625fff]
[ 0.000000] ACPI: RSDP 00000000000f0430 000024 (v02 MEDION)
[ 0.000000] ACPI: XSDT 00000000bf4d9068 000054 (v01 MEDION MEDIONAG 07292010 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000bf4df838 0000F4 (v04 MEDION MEDIONAG 07292010 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000bf4d9150 0066E5 (v02 MEDION MEDIONAG 07292010 INTL 00010013)
[ 0.000000] ACPI: FACS 00000000bf61bf80 000040
[ 0.000000] ACPI: APIC 00000000bf4df930 000062 (v03 MEDION MEDIONAG 07292010 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000bf4df998 000098 (v01 MEDION MEDIONAG 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000bf4dfa30 00003C (v01 MEDION MEDIONAG 07292010 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000bf4dfa70 000176 (v01 MEDION MEDIONAG 07292010 AMI 00010013)
[ 0.000000] ACPI: HPET 00000000bf4dfbe8 000038 (v01 MEDION MEDIONAG 07292010 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f7fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f7fffff]
[ 0.000000] NODE_DATA [mem 0x13f7f8000-0x13f7fcfff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ae00000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0xbf491fff]
[ 0.000000] node 0: [mem 0xbf608000-0xbf609fff]
[ 0.000000] node 0: [mem 0xbf688000-0xbf7fffff]
[ 0.000000] node 0: [mem 0x100000000-0x13f7fffff]
[ 0.000000] On node 0 totalpages: 1043880
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12185 pages used for memmap
[ 0.000000] DMA32 zone: 779788 pages, LIFO batch:31
[ 0.000000] Normal zone: 4064 pages used for memmap
[ 0.000000] Normal zone: 260096 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf492000-0xbf4d8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4d9000-0xbf4dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4e0000-0xbf607fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf60a000-0xbf619fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf61a000-0xbf623fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf624000-0xbf644fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf645000-0xbf687fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013f400000 s81536 r8192 d20864 u1048576
[ 0.000000] pcpu-alloc: s81536 r8192 d20864 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1027546
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-54-generic root=UUID=1eb0b5cb-6b68-466a-84dd-570b4319e1f2 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4000648K/4175520K available (7392K kernel code, 1146K rwdata, 3408K rodata, 1336K init, 1448K bss, 174872K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 2594.221 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.44 BogoMIPS (lpj=10376884)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000028] Security Framework initialized
[ 0.000043] AppArmor: AppArmor initialized
[ 0.000044] Yama: becoming mindful.
[ 0.000328] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001329] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001762] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001768] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.001950] Initializing cgroup subsys memory
[ 0.001956] Initializing cgroup subsys devices
[ 0.001958] Initializing cgroup subsys freezer
[ 0.001959] Initializing cgroup subsys blkio
[ 0.001961] Initializing cgroup subsys perf_event
[ 0.001962] Initializing cgroup subsys hugetlb
[ 0.001982] CPU: Physical Processor ID: 0
[ 0.001983] CPU: Processor Core ID: 0
[ 0.001988] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.001988] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.001990] mce: CPU supports 7 MCE banks
[ 0.002000] CPU0: Thermal monitoring enabled (TM1)
[ 0.002008] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
[ 0.002008] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
[ 0.002008] tlb_flushall_shift: 5
[ 0.002109] Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
[ 0.003610] ACPI: Core revision 20131115
[ 0.005693] ACPI: All ACPI Tables successfully acquired
[ 0.016805] ftrace: allocating 28579 entries in 112 pages
[ 0.030287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070000] smpboot: CPU0: Intel(R) Pentium(R) CPU G620 @ 2.60GHz (fam: 06, model: 2a, stepping: 07)
[ 0.070008] TSC deadline timer enabled
[ 0.070018] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.070023] perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
[ 0.070026] ... version: 3
[ 0.070026] ... bit width: 48
[ 0.070027] ... generic registers: 8
[ 0.070028] ... value mask: 0000ffffffffffff
[ 0.070029] ... max period: 0000ffffffffffff
[ 0.070030] ... fixed-purpose events: 3
[ 0.070031] ... event mask: 00000007000000ff
[ 0.071360] x86: Booting SMP configuration:
[ 0.071362] .... node #0, CPUs: #1
[ 0.084524] x86: Booted up 1 node, 2 CPUs
[ 0.084527] smpboot: Total of 2 processors activated (10376.88 BogoMIPS)
[ 0.084591] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.085978] devtmpfs: initialized
[ 0.088127] EVM: security.selinux
[ 0.088128] EVM: security.SMACK64
[ 0.088129] EVM: security.ima
[ 0.088130] EVM: security.capability
[ 0.088168] PM: Registering ACPI NVS region [mem 0xbf492000-0xbf4d8fff] (290816 bytes)
[ 0.088173] PM: Registering ACPI NVS region [mem 0xbf61a000-0xbf623fff] (40960 bytes)
[ 0.088175] PM: Registering ACPI NVS region [mem 0xbf645000-0xbf687fff] (274432 bytes)
[ 0.088912] pinctrl core: initialized pinctrl subsystem
[ 0.088966] regulator-dummy: no parameters
[ 0.088995] RTC time: 19:45:33, date: 06/11/15
[ 0.089024] NET: Registered protocol family 16
[ 0.089107] cpuidle: using governor ladder
[ 0.089108] cpuidle: using governor menu
[ 0.089137] ACPI: bus type PCI registered
[ 0.089139] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.089185] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.089187] PCI: not using MMCONFIG
[ 0.089188] PCI: Using configuration type 1 for base access
[ 0.089898] bio: create slab <bio-0> at 0
[ 0.090010] ACPI: Added _OSI(Module Device)
[ 0.090012] ACPI: Added _OSI(Processor Device)
[ 0.090013] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.090014] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.091561] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.093466] ACPI: SSDT 00000000bf61ce18 0001D8 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.093659] ACPI: Dynamic OEM Table Load:
[ 0.093661] ACPI: SSDT (null) 0001D8 (v01 AMI IST 00000001 MSFT 03000001)
[ 0.093681] ACPI: SSDT 00000000bf622d98 000054 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.093850] ACPI: Dynamic OEM Table Load:
[ 0.093851] ACPI: SSDT (null) 000054 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.094038] ACPI: Interpreter enabled
[ 0.094044] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.094053] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.094055] ACPI: Using IOAPIC for interrupt routing
[ 0.094073] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.094120] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.115563] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.115660] ACPI: No dock devices found.
[ 0.115794] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.119524] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119529] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.119679] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119987] PCI host bridge to bus 0000:00
[ 0.119990] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.119992] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.119995] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.119996] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.119998] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.119999] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.120001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.120002] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.120010] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.120107] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.120132] pci 0000:00:16.0: reg 0x10: [mem 0xfb229000-0xfb22900f 64bit]
[ 0.120208] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.120278] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.120296] pci 0000:00:19.0: reg 0x10: [mem 0xfb200000-0xfb21ffff]
[ 0.120305] pci 0000:00:19.0: reg 0x14: [mem 0xfb228000-0xfb228fff]
[ 0.120315] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.120376] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.120415] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.120446] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.120467] pci 0000:00:1a.0: reg 0x10: [mem 0xfb227000-0xfb2273ff]
[ 0.120559] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.120599] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.120632] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.120648] pci 0000:00:1b.0: reg 0x10: [mem 0xfb220000-0xfb223fff 64bit]
[ 0.120714] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120776] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.120853] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.120894] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.120923] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
[ 0.120999] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.121042] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.121073] pci 0000:00:1c.6: [8086:1c1c] type 01 class 0x060400
[ 0.121149] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.121190] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.121221] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.121242] pci 0000:00:1d.0: reg 0x10: [mem 0xfb226000-0xfb2263ff]
[ 0.121330] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.121371] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.121400] pci 0000:00:1f.0: [8086:1c46] type 00 class 0x060100
[ 0.121561] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.121579] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.121587] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.121595] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.121603] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.121611] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.121619] pci 0000:00:1f.2: reg 0x24: [mem 0xfb225000-0xfb2257ff]
[ 0.121663] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121721] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.121737] pci 0000:00:1f.3: reg 0x10: [mem 0xfb224000-0xfb2240ff 64bit]
[ 0.121758] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.121873] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.121953] pci 0000:02:00.0: [10de:104a] type 00 class 0x030000
[ 0.121971] pci 0000:02:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.121991] pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.122011] pci 0000:02:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
[ 0.122025] pci 0000:02:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.122038] pci 0000:02:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[ 0.122164] pci 0000:02:00.1: [10de:0e08] type 00 class 0x040300
[ 0.122182] pci 0000:02:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[ 0.132595] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.132601] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.132607] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.132615] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
[ 0.132706] pci 0000:03:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.132732] pci 0000:03:00.0: reg 0x10: [mem 0xfb100000-0xfb101fff 64bit]
[ 0.132864] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.140591] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.140599] pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.140938] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.140981] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.141022] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.141062] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.141103] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.141144] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.141185] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.141225] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.141297] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.141302] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.141334] Found 1 acpi root devices
[ 0.141414] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 0.141416] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.141417] vgaarb: loaded
[ 0.141418] vgaarb: bridge control possible 0000:02:00.0
[ 0.141545] SCSI subsystem initialized
[ 0.141587] libata version 3.00 loaded.
[ 0.141608] ACPI: bus type USB registered
[ 0.141622] usbcore: registered new interface driver usbfs
[ 0.141628] usbcore: registered new interface driver hub
[ 0.141650] usbcore: registered new device driver usb
[ 0.141727] PCI: Using ACPI for IRQ routing
[ 0.148056] PCI: pci_cache_line_size set to 64 bytes
[ 0.148102] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.148103] e820: reserve RAM buffer [mem 0xbf492000-0xbfffffff]
[ 0.148105] e820: reserve RAM buffer [mem 0xbf60a000-0xbfffffff]
[ 0.148106] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.148108] e820: reserve RAM buffer [mem 0x13f800000-0x13fffffff]
[ 0.148179] NetLabel: Initializing
[ 0.148180] NetLabel: domain hash size = 128
[ 0.148181] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.148192] NetLabel: unlabeled traffic allowed by default
[ 0.148242] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.148247] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.150274] Switched to clocksource hpet
[ 0.154138] AppArmor: AppArmor Filesystem Enabled
[ 0.154161] pnp: PnP ACPI init
[ 0.154174] ACPI: bus type PNP registered
[ 0.154308] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.154311] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.154312] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.154314] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.154316] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.154319] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.154398] system 00:01: [io 0x0295-0x0296] has been reserved
[ 0.154400] system 00:01: [io 0x0a00-0x0a01] has been reserved
[ 0.154403] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154431] pnp 00:02: [dma 4]
[ 0.154445] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.154471] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.154488] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.154523] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.154526] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.154547] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.154677] system 00:07: [io 0x0400-0x0453] could not be reserved
[ 0.154679] system 00:07: [io 0x0458-0x047f] has been reserved
[ 0.154680] system 00:07: [io 0x1180-0x119f] has been reserved
[ 0.154682] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.154684] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.154686] system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.154688] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.154690] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.154692] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.154734] system 00:08: [io 0x0454-0x0457] has been reserved
[ 0.154737] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.154835] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.154935] pnp: PnP ACPI: found 10 devices
[ 0.154937] ACPI: bus type PNP unregistered
[ 0.161025] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.161037] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.161041] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[ 0.161046] pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.161050] pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
[ 0.161057] pci 0000:00:1c.6: PCI bridge to [bus 03]
[ 0.161062] pci 0000:00:1c.6: bridge window [mem 0xfb100000-0xfb1fffff]
[ 0.161071] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.161072] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.161074] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.161076] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.161077] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.161079] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.161080] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xffffffff]
[ 0.161082] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.161084] pci_bus 0000:02: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.161085] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
[ 0.161087] pci_bus 0000:03: resource 1 [mem 0xfb100000-0xfb1fffff]
[ 0.161111] NET: Registered protocol family 2
[ 0.161282] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.161364] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.161459] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.161477] TCP: reno registered
[ 0.161483] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.161499] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.161546] NET: Registered protocol family 1
[ 0.414564] pci 0000:02:00.0: Video device with shadowed ROM
[ 0.414689] PCI: CLS 64 bytes, default 64
[ 0.414733] Trying to unpack rootfs image as initramfs...
[ 0.800164] Freeing initrd memory: 26408K (ffff880034c5c000 - ffff880036626000)
[ 0.800169] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.800171] software IO TLB [mem 0xbb492000-0xbf492000] (64MB) mapped at [ffff8800bb492000-ffff8800bf491fff]
[ 0.800340] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x14
[ 0.800346] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x14
[ 0.800389] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.800390] Scanning for low memory corruption every 60 seconds
[ 0.800599] Initialise system trusted keyring
[ 0.800639] audit: initializing netlink socket (disabled)
[ 0.800650] type=2000 audit(1434051932.796:1): initialized
[ 0.824432] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.825282] zbud: loaded
[ 0.825410] VFS: Disk quotas dquot_6.5.2
[ 0.825442] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.825777] fuse init (API version 7.22)
[ 0.825835] msgmni has been set to 7865
[ 0.825877] Key type big_key registered
[ 0.826169] Key type asymmetric registered
[ 0.826171] Asymmetric key parser 'x509' registered
[ 0.826194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.826216] io scheduler noop registered
[ 0.826218] io scheduler deadline registered (default)
[ 0.826236] io scheduler cfq registered
[ 0.826384] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.826505] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.826577] pcieport 0000:00:1c.6: irq 42 for MSI/MSI-X
[ 0.826652] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.826657] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.826672] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.826674] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.826676] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.826680] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.826695] pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
[ 0.826697] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.826701] pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
[ 0.826710] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.826737] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.826770] intel_idle: MWAIT substates: 0x1120
[ 0.826771] intel_idle: v0.4 model 0x2A
[ 0.826773] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.826817] ipmi message handler version 39.2
[ 0.826867] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.826871] ACPI: Power Button [PWRB]
[ 0.826897] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.826899] ACPI: Power Button [PWRF]
[ 0.827095] GHES: HEST is not enabled!
[ 0.827154] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.828225] Linux agpgart interface v0.103
[ 0.829176] brd: module loaded
[ 0.829640] loop: module loaded
[ 0.829882] libphy: Fixed MDIO Bus: probed
[ 0.829945] tun: Universal TUN/TAP device driver, 1.6
[ 0.829946] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.829974] PPP generic driver version 2.4.2
[ 0.830007] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.830012] ehci-pci: EHCI PCI platform driver
[ 0.830087] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.830092] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.830104] ehci-pci 0000:00:1a.0: debug port 2
[ 0.834014] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.834028] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb227000
[ 0.846782] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.846843] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.846846] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.846847] usb usb1: Product: EHCI Host Controller
[ 0.846849] usb usb1: Manufacturer: Linux 3.13.0-54-generic ehci_hcd
[ 0.846850] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.847026] hub 1-0:1.0: USB hub found
[ 0.847034] hub 1-0:1.0: 2 ports detected
[ 0.847175] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.847180] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.847191] ehci-pci 0000:00:1d.0: debug port 2
[ 0.851086] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.851099] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb226000
[ 0.862793] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.862857] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.862859] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.862861] usb usb2: Product: EHCI Host Controller
[ 0.862862] usb usb2: Manufacturer: Linux 3.13.0-54-generic ehci_hcd
[ 0.862864] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.862957] hub 2-0:1.0: USB hub found
[ 0.862964] hub 2-0:1.0: 2 ports detected
[ 0.863041] ehci-platform: EHCI generic platform driver
[ 0.863047] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.863048] ohci-pci: OHCI PCI platform driver
[ 0.863054] ohci-platform: OHCI generic platform driver
[ 0.863058] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.863119] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.863123] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 0.863298] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
[ 0.863303] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
[ 0.863305] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
[ 0.863402] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.863404] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.863406] usb usb3: Product: xHCI Host Controller
[ 0.863407] usb usb3: Manufacturer: Linux 3.13.0-54-generic xhci_hcd
[ 0.863409] usb usb3: SerialNumber: 0000:03:00.0
[ 0.863571] hub 3-0:1.0: USB hub found
[ 0.863582] hub 3-0:1.0: 2 ports detected
[ 0.863642] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.863646] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 0.866642] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.866644] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.866646] usb usb4: Product: xHCI Host Controller
[ 0.866647] usb usb4: Manufacturer: Linux 3.13.0-54-generic xhci_hcd
[ 0.866649] usb usb4: SerialNumber: 0000:03:00.0
[ 0.866811] hub 4-0:1.0: USB hub found
[ 0.866826] hub 4-0:1.0: 2 ports detected
[ 0.874956] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.875360] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.875364] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.875575] mousedev: PS/2 mouse device common for all mice
[ 0.875899] rtc_cmos 00:03: RTC can wake from S4
[ 0.876053] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.876082] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.876126] device-mapper: uevent: version 1.0.3
[ 0.876186] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 0.876191] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.876267] TCP: cubic registered
[ 0.876322] NET: Registered protocol family 10
[ 0.876430] NET: Registered protocol family 17
[ 0.876438] Key type dns_resolver registered
[ 0.876692] Loading compiled-in X.509 certificates
[ 0.877537] Loaded X.509 cert 'Magrathea: Glacier signing key: b38189c2179be60a3b0cb089e50c59b00f983270'
[ 0.877550] registered taskstats version 1
[ 0.879317] Key type trusted registered
[ 0.882119] Key type encrypted registered
[ 0.882122] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.882124] IMA: No TPM chip found, activating TPM-bypass!
[ 0.882356] regulator-dummy: disabling
[ 0.882388] Magic number: 3:79:799
[ 0.882462] rtc_cmos 00:03: setting system clock to 2015-06-11 19:45:33 UTC (1434051933)
[ 0.882731] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.882733] EDD information not available.
[ 0.882771] PM: Hibernation image not present or could not be loaded.
[ 0.883484] Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
[ 0.883485] Write protecting the kernel read-only data: 12288k
[ 0.885229] Freeing unused kernel memory: 788K (ffff88000173b000 - ffff880001800000)
[ 0.886694] Freeing unused kernel memory: 688K (ffff880001b54000 - ffff880001c00000)
[ 0.924421] systemd-udevd[174]: starting version 204
[ 0.934253] pps_core: LinuxPPS API ver. 1 registered
[ 0.934256] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.939241] PTP clock support registered
[ 0.943626] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 0.943628] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.943776] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.943794] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 1.159061] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.210278] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 1.210281] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 6c:62:6d:ee:ec:7d
[ 1.210283] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.210316] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.210335] ahci 0000:00:1f.2: version 3.0
[ 1.210441] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 1.223058] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xd impl SATA mode
[ 1.223064] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
[ 1.239453] scsi0 : ahci
[ 1.239561] scsi1 : ahci
[ 1.239622] scsi2 : ahci
[ 1.239668] scsi3 : ahci
[ 1.239714] scsi4 : ahci
[ 1.239758] scsi5 : ahci
[ 1.239785] ata1: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225100 irq 47
[ 1.239787] ata2: DUMMY
[ 1.239789] ata3: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225200 irq 47
[ 1.239792] ata4: SATA max UDMA/133 abar m2048@0xfb225000 port 0xfb225280 irq 47
[ 1.239793] ata5: DUMMY
[ 1.239794] ata6: DUMMY
[ 1.291462] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.291465] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.291807] hub 1-1:1.0: USB hub found
[ 1.291875] hub 1-1:1.0: 6 ports detected
[ 1.403219] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.535572] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.535577] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.535841] hub 2-1:1.0: USB hub found
[ 1.535932] hub 2-1:1.0: 8 ports detected
[ 1.559240] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.559264] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.560259] ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133
[ 1.560263] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.561544] ata1.00: configured for UDMA/133
[ 1.561767] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
[ 1.561874] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.561940] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.562150] sd 0:0:0:0: [sda] Write Protect is off
[ 1.562154] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.562222] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.601584] sda: sda1 sda2 sda3
[ 1.601949] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.602669] ata4.00: HPA detected: current 625140335, native 625142448
[ 1.602674] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 1.602676] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.607358] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 1.661061] ata4.00: configured for UDMA/133
[ 1.700049] usb 1-1.3: New USB device found, idVendor=1a40, idProduct=0101
[ 1.700054] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.700056] usb 1-1.3: Product: USB 2.0 Hub
[ 1.700322] hub 1-1.3:1.0: USB hub found
[ 1.700424] hub 1-1.3:1.0: 4 ports detected
[ 1.799403] tsc: Refined TSC clocksource calibration: 2594.108 MHz
[ 1.807632] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[ 1.839440] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.842154] ata3.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
[ 1.846114] ata3.00: configured for UDMA/100
[ 1.917604] usb 2-1.5: New USB device found, idVendor=148f, idProduct=3070
[ 1.917609] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.917612] usb 2-1.5: Product: 802.11 n WLAN
[ 1.917614] usb 2-1.5: Manufacturer: Ralink
[ 1.917617] usb 2-1.5: SerialNumber: 1.0
[ 1.955397] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
[ 1.991643] usb 2-1.6: new low-speed USB device number 4 using ehci-pci
[ 2.065895] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.065898] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.065976] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.066013] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.066089] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 2.066170] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.066226] sd 3:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 2.066350] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.066353] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.066397] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.090548] usb 2-1.6: New USB device found, idVendor=046d, idProduct=c505
[ 2.090554] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.090556] usb 2-1.6: Product: USB Receiver
[ 2.090559] usb 2-1.6: Manufacturer: Logitech
[ 2.093877] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.101890] sdb: sdb1 sdb2 < sdb5 > sdb3
[ 2.102317] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.106687] usbcore: registered new interface driver usbhid
[ 2.106690] usbhid: USB HID core driver
[ 2.107997] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input5
[ 2.108119] hid-generic 0003:046D:C505.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input0
[ 2.108293] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input6
[ 2.108405] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input1
[ 2.159684] usb 2-1.7: new high-speed USB device number 5 using ehci-pci
[ 2.253870] usb 2-1.7: New USB device found, idVendor=058f, idProduct=6366
[ 2.253875] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.253878] usb 2-1.7: Product: Mass Storage Device
[ 2.253880] usb 2-1.7: Manufacturer: Generic
[ 2.253883] usb 2-1.7: SerialNumber: 058F63666471
[ 2.256655] usb-storage 2-1.7:1.0: USB Mass Storage device detected
[ 2.256700] scsi6 : usb-storage 2-1.7:1.0
[ 2.256748] usbcore: registered new interface driver usb-storage
[ 2.323846] usb 1-1.3.1: new high-speed USB device number 4 using ehci-pci
[ 2.448617] usb 1-1.3.1: New USB device found, idVendor=0cf3, idProduct=1006
[ 2.448621] usb 1-1.3.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 2.448623] usb 1-1.3.1: Product: USB2.0 WLAN
[ 2.448624] usb 1-1.3.1: Manufacturer: ATHEROS
[ 2.448625] usb 1-1.3.1: SerialNumber: 12345
[ 2.535935] usb 1-1.3.3: new low-speed USB device number 5 using ehci-pci
[ 2.648500] usb 1-1.3.3: New USB device found, idVendor=177f, idProduct=0610
[ 2.648505] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.648508] usb 1-1.3.3: Product: Wireless Laser Mouse
[ 2.648510] usb 1-1.3.3: Manufacturer: Sweex
[ 2.650806] input: Sweex Wireless Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3.3/1-1.3.3:1.0/input/input7
[ 2.650889] hid-generic 0003:177F:0610.0003: input,hidraw2: USB HID v1.10 Mouse [Sweex Wireless Laser Mouse] on usb-0000:00:1a.0-1.3.3/input0
[ 2.742931] random: nonblocking pool is initialized
[ 2.800141] Switched to clocksource tsc
[ 3.257365] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 3.257537] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 3.259403] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 4.121661] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 26.833313] Adding 3143676k swap on /dev/sdb5. Priority:-1 extents:1 across:3143676k FS
[ 26.924048] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.015687] systemd-udevd[445]: starting version 204
[ 27.154344] mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[ 27.175629] lp: driver loaded but no devices found
[ 27.175672] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.180413] Linux video capture interface: v2.00
[ 27.188334] ppdev: user-space parallel port driver
[ 27.193836] systemd-udevd[470]: renamed network interface eth0 to eth1
[ 27.211574] [drm] Initialized drm 1.1.0 20060810
[ 27.220747] nvidia: module license 'NVIDIA' taints kernel.
[ 27.220751] Disabling lock debugging due to kernel taint
[ 27.227942] cfg80211: Calling CRDA to update world regulatory domain
[ 27.239902] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 27.245398] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 27.248700] [drm] Initialized nvidia-drm 0.0.0 20130102 for 0000:02:00.0 on minor 0
[ 27.248708] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 331.113 Mon Dec 1 21:08:13 PST 2014
[ 27.266539] usb 1-1.3.1: ath9k_htc: Firmware htc_9271.fw requested
[ 27.266613] usbcore: registered new interface driver ath9k_htc
[ 27.275435] type=1400 audit(1434051959.871:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=505 comm="apparmor_parser"
[ 27.275442] type=1400 audit(1434051959.871:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
[ 27.275446] type=1400 audit(1434051959.871:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
[ 27.275833] type=1400 audit(1434051959.871:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=505 comm="apparmor_parser"
[ 27.275838] type=1400 audit(1434051959.871:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
[ 27.276040] type=1400 audit(1434051959.871:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=505 comm="apparmor_parser"
[ 27.278491] type=1400 audit(1434051959.875:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=517 comm="apparmor_parser"
[ 27.294249] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 27.372667] keucr: module is from the staging directory, the quality is unknown, you have been warned.
[ 27.372944] usbcore: registered new interface driver eucr
[ 27.452363] usb 2-1.5: reset high-speed USB device number 3 using ehci-pci
[ 27.516254] intel_rapl: domain uncore energy ctr 0:0 not working, skip
[ 27.535845] gpio_ich: GPIO from 180 to 255 on gpio_ich
[ 27.559792] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 27.619454] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 27.623141] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 27.623372] usbcore: registered new interface driver rt2800usb
[ 27.666618] usb 1-1.3.1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 27.904646] ath9k_htc 1-1.3.1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 27.917774] cfg80211: World regulatory domain updated:
[ 27.917776] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 27.917777] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.917779] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.917780] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 27.917781] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 27.917783] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 28.173319] ath9k_htc 1-1.3.1:1.0: ath9k_htc: FW Version: 1.3
[ 28.173323] ath: EEPROM regdomain: 0x809c
[ 28.173325] ath: EEPROM indicates we should expect a country code
[ 28.173327] ath: doing EEPROM country->regdmn map search
[ 28.173329] ath: country maps to regdmn code: 0x52
[ 28.173331] ath: Country alpha2 being used: CN
[ 28.173332] ath: Regpair used: 0x52
[ 28.177733] ieee80211 phy1: Atheros AR9271 Rev:1
[ 28.177743] cfg80211: Calling CRDA for country: CN
[ 28.184712] cfg80211: Regulatory domain changed to country: CN
[ 28.184715] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 28.184717] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 28.184719] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 28.184720] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 28.184721] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[ 28.184723] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 28.304783] hda-intel 0000:00:1b.0: Codec #3 probe error; disabling it...
[ 28.315943] hda_codec: ALC887-VD: SKU not ready 0x411111f0
[ 28.316310] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 28.316312] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 28.316313] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 28.316314] mono: mono_out=0x0
[ 28.316315] dig-out=0x1e/0x0
[ 28.316316] inputs:
[ 28.316317] Mic=0x19
[ 28.316318] Line=0x18
[ 28.316319] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 28.316320] realtek: Enable default setup for auto mode as fallback
[ 28.327419] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 28.327475] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 28.327513] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 28.327550] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 28.327589] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 28.327624] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 28.327661] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 28.327857] hda_intel: Disabling MSI
[ 28.327863] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 28.327898] hda-intel 0000:02:00.1: Disabling 64bit DMA
[ 28.331050] hda-intel 0000:02:00.1: Enable delay in RIRB handling
[ 28.685137] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1c.1/0000:02:00.1/sound/card1/input16
[ 28.685243] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1c.1/0000:02:00.1/sound/card1/input15
[ 29.117767] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 29.709794] init: failsafe main process (800) killed by TERM signal
[ 30.152144] Bluetooth: Core ver 2.17
[ 30.152158] NET: Registered protocol family 31
[ 30.152160] Bluetooth: HCI device and connection manager initialized
[ 30.152167] Bluetooth: HCI socket layer initialized
[ 30.152169] Bluetooth: L2CAP socket layer initialized
[ 30.152173] Bluetooth: SCO socket layer initialized
[ 30.159235] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.159238] Bluetooth: BNEP filters: protocol multicast
[ 30.159247] Bluetooth: BNEP socket layer initialized
[ 30.163841] Bluetooth: RFCOMM TTY layer initialized
[ 30.163852] Bluetooth: RFCOMM socket layer initialized
[ 30.163858] Bluetooth: RFCOMM ver 1.11
[ 30.220006] type=1400 audit(1434051962.815:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1037 comm="apparmor_parser"
[ 30.220013] type=1400 audit(1434051962.815:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=1037 comm="apparmor_parser"
[ 30.220395] type=1400 audit(1434051962.815:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1037 comm="apparmor_parser"
[ 30.438355] init: cups main process (1038) killed by HUP signal
[ 30.438366] init: cups main process ended, respawning
[ 31.163882] init: samba-ad-dc main process (1129) terminated with status 1
[ 31.224696] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 31.326785] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
[ 31.326884] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 31.640394] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 31.643439] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 31.712497] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 34.362041] nvidia 0000:02:00.0: irq 50 for MSI/MSI-X
[ 35.184319] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.734393] init: plymouth-upstart-bridge main process ended, respawning
[ 35.743325] init: plymouth-upstart-bridge main process ended, respawning
[ 37.780042] wlan0: authenticate with c8:3a:35:2e:fc:c9
[ 37.846633] wlan0: send auth to c8:3a:35:2e:fc:c9 (try 1/3)
[ 37.848111] wlan0: authenticated
[ 37.850882] wlan0: associate with c8:3a:35:2e:fc:c9 (try 1/3)
[ 37.853729] wlan0: RX AssocResp from c8:3a:35:2e:fc:c9 (capab=0x401 status=0 aid=2)
[ 37.860228] wlan0: associated
[ 37.860245] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 37.860474] wlan0: deauthenticating from c8:3a:35:2e:fc:c9 by local choice (reason=2)
[ 37.909155] cfg80211: Calling CRDA to update world regulatory domain
[ 37.909218] wlan0: authenticate with c8:3a:35:2e:fc:c9
[ 37.936435] wlan0: send auth to c8:3a:35:2e:fc:c9 (try 1/3)
[ 37.936553] cfg80211: World regulatory domain updated:
[ 37.936555] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 37.936557] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.936559] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.936560] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 37.936561] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.936563] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 37.937922] wlan0: authenticated
[ 37.938962] wlan0: associate with c8:3a:35:2e:fc:c9 (try 1/3)
[ 37.941785] wlan0: RX AssocResp from c8:3a:35:2e:fc:c9 (capab=0x401 status=0 aid=2)
[ 37.948808] wlan0: associated
[ 40.322841] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.326812] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 40.785452] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 40.826624] 8021q: 802.1Q VLAN Support v1.8
[ 41.137282] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 41.444157] init: plymouth-stop pre-start process (3123) terminated with status 1
[ 47.958048] wlan0: deauthenticating from c8:3a:35:2e:fc:c9 by local choice (reason=3)
[ 48.008340] cfg80211: Calling CRDA to update world regulatory domain
[ 48.010574] cfg80211: World regulatory domain updated:
[ 48.010577] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 48.010579] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 48.010580] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 48.010582] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 48.010583] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 48.010584] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 49.398107] wlan0: authenticate with c8:3a:35:2e:fc:c9
[ 49.451690] wlan0: send auth to c8:3a:35:2e:fc:c9 (try 1/3)
[ 49.453268] wlan0: authenticated
[ 49.454343] wlan0: associate with c8:3a:35:2e:fc:c9 (try 1/3)
[ 49.457146] wlan0: RX AssocResp from c8:3a:35:2e:fc:c9 (capab=0x401 status=0 aid=2)
[ 49.463766] wlan0: associated
[ 60.327956] audit_printk_skb: 162 callbacks suppressed
[ 60.327962] type=1400 audit(1434051992.904:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3878 comm="apparmor_parser"
[ 60.327971] type=1400 audit(1434051992.904:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3878 comm="apparmor_parser"
[ 60.328603] type=1400 audit(1434051992.904:68): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3878 comm="apparmor_parser"
q@q:~$