ATI && xorg.conf Εδώ---->

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό ZaaBI_AlonSo » 29 Μαρ 2009, 01:58

ΈΧΩ ΤΡΕΜΌΠΑΙΓΜΑ (flickering) στα video, flash apps χωρίς το X11 ενεργοποιημένο

Εδώ postάρετε το xorg.conf αρχείο σας το οποίο βοηθάει στο setάρισμα της κάρτας γραφικών στο ubuntu!
Γράψτε το μοντέλο της κάρτας σας και τον κώδικα από το xorg ο οποίος μπορεί να βρεθεί ως εξής :

Κώδικας: Επιλογή όλων
sudo gedit /etc/X11/xorg.conf


Η κάρτα μου είναι ATI Mobility radeon HD 3650.

Και το Xorg μου:


Κώδικας: Επιλογή όλων

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg


Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
Option "XAANoOffscreenPixmaps" "on"
Option "AccelMethod" "EXA"
Option "BackingStore" "on"
Option "UseFastTLS" "1"
EndSection

Section "Extensions"
Option "RENDER" "Enable"
Option "DAMAGE" "Enable"
Option "Composite" "Enable"
EndSection


Περιμένω και τα δικά σας....
Τελευταία επεξεργασία από ZaaBI_AlonSo και 29 Μαρ 2009, 13:27, έχει επεξεργασθεί 1 φορά/ες συνολικά
Θές site????

Μπες : www.istoselidas.gr


ακόμα υποκατασκευή αλλαά βλέπεται!


e-mail : zaabalonso@gmail.com
ZaaBI_AlonSo
babeTUX
babeTUX
 
Δημοσιεύσεις: 26
Εγγραφή: 15 Φεβ 2009, 19:34
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό ZaaBI_AlonSo » 29 Μαρ 2009, 13:26

Άντε ρε Θα γράψει και κανάς άλλος! ΝΑ δούμε τι πρόβλημα έχει ο καθένας γιατί αν περιμένουμε απο την ATI καήκαμε!!!! :shock:
Θές site????

Μπες : www.istoselidas.gr


ακόμα υποκατασκευή αλλαά βλέπεται!


e-mail : zaabalonso@gmail.com
ZaaBI_AlonSo
babeTUX
babeTUX
 
Δημοσιεύσεις: 26
Εγγραφή: 15 Φεβ 2009, 19:34
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό assessor » 02 Απρ 2009, 15:31

καλησπέρα
έχω κ εγώ το ίδιο πρόβλημα (flickering) με την 4670 οπως και με τον ήχο (πολυ χαμηλη ένταση παρόλο που ειναι στο full)
έδωσα την εντολή και ορίστε το αποτέλεσμα:

Κώδικας: Επιλογή όλων
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
Τελευταία επεξεργασία από linuxman και 02 Απρ 2009, 16:42, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Add tags [code][/code]
Γνώσεις ⇛ Linux:Χαμηλό ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτρια
Λειτουργικό Ubuntu 8.10 σε AMD Athlon 64 X2 6000+ σε ASUS M3A78-T HDMI
Προδιαγραφές ⇛ AMD Athlon 64 X2 6000+ │ RAM 5GB │ ATI Radeon HD 4670 │ on board │ Samsung 914v 1208x1024
Άβαταρ μέλους
assessor
babeTUX
babeTUX
 
Δημοσιεύσεις: 35
Εγγραφή: 29 Μαρ 2009, 12:47
Τοποθεσία: ΘΕΣΣΑΛΟΝΙΚΗ
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό Nisok » 02 Απρ 2009, 17:26

Εγώ δεν έχω πρόβλημα.

Μόνο στο resume απο suspend. αλλά είναι άλλη υπόθεση...
Άβαταρ μέλους
Nisok
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 2637
Εγγραφή: 25 Ιαν 2009, 15:00
Τοποθεσία: /home
IRC: nisok
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό Nisok » 03 Απρ 2009, 13:01

Αλλαγή... τελικά έχω μικρό πρόβλημα... αλλά μου φαίνεται ξεκίνησε με τα χθεσινά updates. Γιατί την περασμένη εβδομάδα όλα ήταν κυριλέ...


Είμαστε σίγουροι ότι είναι η ATI υπεύθυνη.
Άβαταρ μέλους
Nisok
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 2637
Εγγραφή: 25 Ιαν 2009, 15:00
Τοποθεσία: /home
IRC: nisok
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό makis sv » 12 Απρ 2009, 10:50

Γειά σας
έχω και εγώ τρεμόπαιγμα στα video όταν ενεργοποιώ τον κλειστό οδηγό .
Χωρίς αυτόν όμως δεν έχω τρισδιάστατα.
Υπάρχει λύση?

Κώδικας: Επιλογή όλων
ATI HD2400PRO

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# Note that some configuration settings that could be done previously
# in this file, now are automatically configured by the server and settings
# here are ignored.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
DefaultDepth 24
EndSection

Section "Module"
Load "glx"
EndSection

Section "Device"
Identifier "Configured Video Device"
Driver "fglrx"
EndSection
Προγραμματισμός: Καθόλου ┃ Αγγλικά: Λίγα
Ubuntu 10.04 32-bit (el_GR.UTF-8)
CPU: Core1 2,2GHz
RAM 2000 Mb
Gigabyte GEFORCE 8400GS
eth0: Realtek
makis sv
babeTUX
babeTUX
 
Δημοσιεύσεις: 61
Εγγραφή: 03 Ιαν 2009, 20:57
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό monkgr » 13 Απρ 2009, 12:56

Δεν το δοκίμασα ακόμα, αλλά στις οδηγίες για την εγκατάσταση του Gentoo υπάρχει μια ενότητα με τίτλο hardware 3D acceleration guide. Εκεί αναφέρεται στις ρυθμίσεις που πρέπει να είναι περασμένες στο Xorg.conf, όπου, στο Section "Module" προτείνει να περάσει ο χρήστης τις εξής εντολές:
Load "dri"
Load "glx"
...
EndSection
...
Section "Device"
driver "radeon"(αντικαταστήστε το radeon με το όνομα του δικού σας driver)
...
EndSection
...
Section "dri"
Mode 0666
EndSection

Επειδή είμαι στη δουλειά, όπου έχω άλλη κάρτα γραφικών (Ιντέλ), δεν είμαι σε θέση να δοκιμάσω κατά πόσον το direct rendering λύνει το πρόβλημα, αλλά νομίζω ότι μάλλον κάτι τέτοιο πρέπει να παίζει.
Στη συνέχεια, δίνοντας από την κονσόλα
$ glxinfo | grep rendering
θα πρέπει να πάρουμε την απάντηση
direct rendering: Yes
(αν πάρουμε αρνητική απάντηση, σημαίνει ότι δεν έχουμε direct rendering).

Αυτά προς το παρόν και... μόλις έχω νεώτερα (κατά το βραδάκι), τα ξαναλέμε! ;)
Μήγαρις ἔχω ἄλλο στὸ νοῦ μου, πάρεξ ἐλευθερία καὶ γλῶσσα; (Διονύσιος Σολωμός)

[i][color=#FF0040]Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Μόνο LaTeX ┃ Ἀγγλικά: Καλά
Άβαταρ μέλους
monkgr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 924
Εγγραφή: 26 Μαρ 2009, 21:07
Τοποθεσία: Ρόδος
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό monkgr » 13 Απρ 2009, 13:12

Επιπλέον βρήκα αυτό στο Ubuntu forum:

[SOLVED] [FIX] Video Flicker with Compiz on ATI Radeon M285 (may help others)
The following is what worked for me to get rid of the video flicker in Gutsy without breaking Compiz. I have a Radeon Mobility X1400 with the newest ATI proprietary drivers on a Gateway M285-e using the Gstreamer ffmpeg and codecs.

In addition to disabling Video Overlay and enabling OpenGL overlay (really improves live video on cube rotation and on the other compiz effects. Full screen video was improved too. ) the Option "TexturedVideo" "off" was added. Overall this eliminates the diagonal artifacts, and the flicker when playing videos.

Here are the step by step instructions to try what I did.

First make a copy of the xorg.conf - I like using the days date (YYMMDD) where shown

Code:

sudo cp /etc/X11/xorg.conf /etc/X11/xorg.conf.backup<date>

Next we open the xorg.conf for editing.

Code:

sudo gedit /etc/X11/xorg.conf

After which I added the following to the Device section under the driver

Code:

Section "Device"
........
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "on"
Option "TexturedVideo" "off"
.........
EndSection

Save the file and Reboot (sudo reboot) and hope it works!

If this change breaks your X - boot into the recover command line from Grub (Esc then second choice while booting) and do the following

Code:

sudo cp /etc/X11/xorg.conf.backup<date> /etc/X11/xorg.conf

If you can't remember the backup name, or want to switch to a different xorg.conf do a directory listing which will list all the files.

Code:

cd /etc/X11/
dir

Then reboot and it will be back to your old configuration.

Hopefully this helps!

Φαίνεται ότι ο τύπος το έλυσε το πρόβλημα (έτσι γράφει, τουλάχιστον), οπότε υπάρχει κάποιο φως εδώ.
Μήγαρις ἔχω ἄλλο στὸ νοῦ μου, πάρεξ ἐλευθερία καὶ γλῶσσα; (Διονύσιος Σολωμός)

[i][color=#FF0040]Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Μόνο LaTeX ┃ Ἀγγλικά: Καλά
Άβαταρ μέλους
monkgr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 924
Εγγραφή: 26 Μαρ 2009, 21:07
Τοποθεσία: Ρόδος
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό monkgr » 13 Απρ 2009, 18:07

Λοιπόν, όντως εξαφανίστηκε το flickering με την λύση του τύπου. Έχουμε και λέμε:
Στο αρχείο Xorg.conf (αφού κάνουμε πρώτα ένα μπακάπ, καλού-κακού), πρσοθέτουμε (με sudo gedit):
Load "dri"
Load "glx"
...
EndSection
...
Section "Device"
driver "fglrx" (αντικαταστήστε το radeon με το όνομα του δικού σας driver)
Option "VideoOverlay" "off"
Option "OpenGLOverlay" "on"
Option "TexturedVideo" "off"
EndSection

Section "dri"
Mode 0666
...
EndSection

Επανεκκινούμε το σύστημα, σταυρώνουμε τα δάχτυλά μας και...
Εμένα πάντως μου δούλεψε!
Μήγαρις ἔχω ἄλλο στὸ νοῦ μου, πάρεξ ἐλευθερία καὶ γλῶσσα; (Διονύσιος Σολωμός)

[i][color=#FF0040]Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Μόνο LaTeX ┃ Ἀγγλικά: Καλά
Άβαταρ μέλους
monkgr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 924
Εγγραφή: 26 Μαρ 2009, 21:07
Τοποθεσία: Ρόδος
Εκτύπωση

Re: ATI && xorg.conf Εδώ---->

Δημοσίευσηαπό logari81 » 13 Απρ 2009, 20:23

μα καλα... για καρτα X1200 δεν χρειαζεσαι τους κλειστους οδηγούς. Και με τους ανοιχτους δεν υπαρχει flickering, χρειαζεται μονο να ανοιξεις το EXA.
http://pastebin.ubuntu.com/130272/
http://opensourceecology.org/


Λειτουργικό: Ubuntu 10.04 lucid 64-bitΠροδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)
logari81
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6074
Εγγραφή: 14 Μάιος 2008, 10:40
Εκτύπωση

Επόμενο

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV