Προβλημα με usb wi-fi adapter στο 16.04  Το θέμα επιλύθηκε

...κάρτες δικτύου, modems, προβλήματα internet
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list

Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 13:36

Γεια σας, ειχα εγκαταστησει εναν adapter (turbo x) πριν εναμιση περιπου χρονο για να συνδεομαι στο wifi απο τον σταθερο μου υπολογιστη. Η συνδεση εγινε αμεσα απλα χρησιμοποιωντας τον κωδικο της συνδεσης. Οταν μαλιστα φορτωνα τα windows απο το δευτερο δισκο μου συνδεοταν αμεσως στο αποθηκευμενο δικτυο χωρις ποτε να χρειαστει να κανω καποια εγκτασταση drivers οπως συνηθως γινεται στα windows.
Ομως πριν μερικες μερες μετα απο αναβαθμιση (αν θυμαμαι καλα αφορουσε και το kernel) αρχισαν καποια προβληματα που πιθανον οφειλονταν και στον ανταπτορα:
-- Μετα απο περιεργη συμπεριφορα με αποσυνδεσεις απο το wifi και επανεκκινηση χαθηκαν τα μενου της επιφανειας εργασιας. ( Το ελυσα ευκολα ανατρεχοντας εδω στο φορουμ σε παλιοτερο ποστ).
--Ο ανταπτορας αναγνωριζεται απο το συστημα (δλδ εμφανιζεται η επιλογη "συνδεση σε wifi") αλλα δεν εμφανιζεται η λιστα με τα διαθεσιμα δικτυα για να βρω το δικο μου και να συνδεθω.
-- Αλλες φορες εμφανιζεται η λιστα, παταω συνδεση αλλα δεν με συνδεει στο δικτυο μου. Ξαναβαζω τον κωδικο μου αλλα συνεχιζει να μην συνδεεται.
--Ο ανταπτορας προκαλει παγωματα στο συστημα: οταν εκκινω το ubuntu η οθονη καποιες φορες παγωνει με ενα βαθυ μοβ χρωμα στο σημειο που πρεπει να βαλω το password. Βγαζω τον ανταπτορα απ το usb port και το παγωμα σταματαει! Αλλες φορες οταν παω να κανω επανεκκινηση παγωνει σε ενα σημειο εκει που φορτωνει η μπαρα και το συστημα μενει εκει χωρις να προχωραει (προφανως οφειλεται στο οτι ειναι συνδεδεμενος ο ανταπτορας).

Μετα απο αυτα θεωρησα οτι ισως ο ανταπτορας εχει χαλασει και αγορασα εναν καινουργιο (tp-link) τον οποιο δεν βλεπει καθολου το ubuntu -αλλα και στα windows δεν καταφερνω να τον εγκαταστησω ουτε με το cd με τους drivers!....
Σκεφτηκα μηπως ειναι καποιο προβλημα hardware με τις θυρες usb αλλα ουτε αυτο παιζει γιατι ετρεξα καποια διαγνωστικα στα windows και οι θυρες αναγνωριζονται και εμφανιζονται κανονικα απο το συστημα.

Μετα απ ολα αυτα εχει κανεις καποια ιδεα τι μπορει να συμβανει;
Ευχαριστω!
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό the_eye » 26 Μάιος 2018, 15:40

Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα των εντολών στο τερματικό :
lspci -nn
lsusb
rfkill list
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 16:52

Ετρεξα τους κωδικες 2 φορες και σου δινω τα αποτελεσματα. 1η φορα:
Κώδικας: Επιλογή όλων
1ο:
$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
[8086:29c0] (rev 10)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port
[8086:29c1] (rev 10)
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio
Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0]
(rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2]
(rev 01)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
[8086:27c8] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
[8086:27c9] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
[8086:27ca] (rev 01)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
[8086:27cb] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
[8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
[8086:27b8] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
[8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev
01)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9500 GT]
[10de:0640] (rev a1)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI
Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
$ lsusb
Bus 001 Device 004: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN
Adapter
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Brfus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Και τις 2 φορες το "rfkill list" δεν εδωσε κανενα αποτελεσμα.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 16:56

2η φορα:
Κώδικας: Επιλογή όλων
2o:
lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
[8086:29c0] (rev 10)
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port
[8086:29c1] (rev 10)
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio
Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0]
(rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 2 [8086:27d2]
(rev 01)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1
[8086:27c8] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2
[8086:27c9] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3
[8086:27ca] (rev 01)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4
[8086:27cb] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller
[8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge
[8086:27b8] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode]
[8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev
01)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation G96 [GeForce 9500 GT]
[10de:0640] (rev a1)
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI
Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
lsusb
Bus 001 Device 003: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN
Adapter
Bus 001 Device 002: ID 058f:6362 Alcor Micro Corp. Flash Card Reader/Writer
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 17:03

Την 1η φορα που τα ετρεξα ο ανταπτορας φαινοταν να αναγνωριζεται απο το συστημα (υπηρχε η επιλογη "ενεργοποιηση wifi") ενω την 2η οχι ( γι αυτο και τα ετρεξα 2 φορες). Δεν ξερω αν αυτο βοηθαει.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό the_eye » 26 Μάιος 2018, 18:40

Κώδικας: Επιλογή όλων
Bus 001 Device 004: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191SU 802.11n WLAN Adapter

Αυτή είναι η κάρτα σου.

Δώσε και το dmesg αφού χαθεί η επιλογή "ενεργοποιηση wifi"
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 22:29

Κώδικας: Επιλογή όλων
dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-127-generic (buildd@lcy01-amd64-020) (gcc version 5.4.0
20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9) ) #153-Ubuntu SMP Sat May 19 10:58:15 UTC 2018
(Ubuntu 4.4.0-127.153-generic 4.4.128)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c0000000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-S2L/G31M-S2L, BIOS F6 06/05/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 0C0000000 mask FC0000000 uncachable
[    0.000000]   2 base 100000000 mask FC0000000 write-back
[    0.000000]   3 base 0BFF00000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  [    0.000000] original variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 4GB, type WB
[    0.000000] reg 1, base: 3GB, range: 1GB, type UC
[    0.000000] reg 2, base: 4GB, range: 1GB, type WB
[    0.000000] reg 3, base: 3071MB, range: 1MB, type UC
[    0.000000] total RAM covered: 4095M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K chunk_size: 2M num_reg: 4  lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3071MB, range: 1MB, type UC
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] e820: update [mem 0xbff00000-0xffffffff] usable ==> reserved
[    0.000000] found SMP MP-table at [mem 0x000f4ea0-0x000f4eaf] mapped at [c00f4ea0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x021fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x01d85000, 0x01d85fff] PGTABLE
[    0.000000] BRK [0x01d86000, 0x01d86fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x337ee000-0x35beefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6870 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x00000000BFEE3040 000038 (v01 GBT    GBTUACPI 42302E31
GBTU 01010101)
[    0.000000] ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT    GBTUACPI 42302E31
GBTU 01010101)
[    0.000000] ACPI: DSDT 0x00000000BFEE3180 0040E1 (v01 GBT    GBTUACPI 00001000
MSFT 0100000C)
[    0.000000] ACPI: FACS 0x00000000BFEE0000 000040
[    0.000000] ACPI: HPET 0x00000000BFEE73C0 000038 (v01 GBT    GBTUACPI 42302E31
GBTU 00000098)
[    0.000000] ACPI: MCFG 0x00000000BFEE7440 00003C (v01 GBT    GBTUACPI 42302E31
GBTU 01010101)
[    0.000000] ACPI: APIC 0x00000000BFEE72C0 000084 (v01 GBT    GBTUACPI 42302E31
GBTU 01010101)
[    0.000000] ACPI: SSDT 0x00000000BFEE7AE0 0003AB (v01 PmRef  CpuPm    00003000
INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 4228MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000013fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bfedffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000013fffffff] [    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[    0.000000] On node 0 totalpages: 1048190
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 819938 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0xd0000000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 19 pages/cpu @f5d8b000 s47436 r0 d30388 u77824
[    0.000000] pcpu-alloc: s47436 r0 d30388 u77824 alloc=19*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1045960
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-127-generic
root=UUID=b97741f0-e5e1-4dfd-a0fc-8971c71a44aa ro quiet splash vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 4099748K/4192760K available (8020K kernel code, 781K rwdata, 3176K
rodata, 948K init, 800K bss, 93012K reserved, 0K cma-reserved, 3279752K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xc1bb6000 - 0xc1ca3000   ( 948 kB)                     .data : 0xc17d5364 - 0xc1bb47c0   (3965 kB)
                     .text : 0xc1000000 - 0xc17d5364   (8020 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] Build-time adjustment of leaf fanout to 32.
[    0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f2838000 soft=f283a000
[    0.000000] vt handoff: transparent VT on vt#7
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 4194304 bytes of page_ext
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2500.087 MHz processor
[    0.004014] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.17
BogoMIPS (lpj=10000348)
[    0.004018] pid_max: default: 32768 minimum: 301
[    0.004029] ACPI: Core revision 20150930
[    0.010746] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.010768] Security Framework initialized
[    0.010771] Yama: becoming mindful.
[    0.010796] AppArmor: AppArmor initialized
[    0.010835] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.010837] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.011096] Initializing cgroup subsys io
[    0.011102] Initializing cgroup subsys memory
[    0.011111] Initializing cgroup subsys devices
[    0.011115] Initializing cgroup subsys freezer
[    0.011119] Initializing cgroup subsys net_cls
[    0.011122] Initializing cgroup subsys perf_event
[    0.011125] Initializing cgroup subsys net_prio
[    0.011130] Initializing cgroup subsys hugetlb
[    0.011133] Initializing cgroup subsys pids
[    0.011152] CPU: Physical Processor ID: 0
[    0.011154] CPU: Processor Core ID: 0
[    0.011160] mce: CPU supports 6 MCE banks
[    0.011170] CPU0: Thermal monitoring enabled (TM2)
[    0.011174] process: using mwait in idle threads
[    0.011182] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.011184] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.011187] Spectre V2 : Mitigation: Full generic retpoline
[    0.011189] Spectre V2 : Speculation control IBPB not-supported IBRS not-supported
[    0.011190] Spectre V2 : Filling RSB on context switch
[    0.011192] Speculative Store Bypass: Vulnerable
[    0.011816] Freeing SMP alternatives memory: 32K
[    0.014694] ftrace: allocating 31508 entries in 62 pages
[    0.032106] smpboot: APIC(0) Converting physical 0 to logical package 0 [    0.032110] smpboot: Max logical packages: 2
[    0.032114] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032481] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.076000] smpboot: CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz (family:
0x6, model: 0x17, stepping: 0x6)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.076000] CPU 1 irqstacks, hard=f219e000 soft=f21a8000
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.008000] Initializing CPU#1
[    0.080042] x86: Booted up 1 node, 2 CPUs
[    0.080047] smpboot: Total of 2 processors activated (10000.34 BogoMIPS)
[    0.081445] devtmpfs: initialized
[    0.081445] evm: security.selinux
[    0.081445] evm: security.SMACK64
[    0.081445] evm: security.SMACK64EXEC
[    0.081445] evm: security.SMACK64TRANSMUTE
[    0.081445] evm: security.SMACK64MMAP
[    0.081445] evm: security.ima
[    0.081445] evm: security.capability
[    0.081445] PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2fff] (12288 bytes)
[    0.081445] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
7645041785100000 ns
[    0.081445] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.081445] pinctrl core: initialized pinctrl subsystem
[    0.081445] RTC time: 15:59:56, date: 05/26/18
[    0.081445] NET: Registered protocol family 16
[    0.081445] EISA bus registered
[    0.092010] cpuidle: using governor ladder
[    0.100008] cpuidle: using governor menu
[    0.100016] PCCT header not found.
[    0.100151] ACPI: bus type PCI registered
[    0.100154] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.100232] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base
0xc0000000)
[    0.100235] PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
[    0.100237] PCI: Using MMCONFIG for extended config space
[    0.100238] PCI: Using configuration type 1 for base access
[    0.108115] ACPI: Added _OSI(Module Device)
[    0.108117] ACPI: Added _OSI(Processor Device)
[    0.108119] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108121] ACPI: Added _OSI(Processor Aggregator Device)
[    0.112213] ACPI: Dynamic OEM Table Load:[    0.112222] ACPI: SSDT 0x00000000F21AE800 0002AE (v01 PmRef  Cpu0Ist  00003000 INTL
20040311)
[    0.112521] ACPI: Dynamic OEM Table Load:
[    0.112525] ACPI: SSDT 0x00000000F221F600 000152 (v01 PmRef  Cpu1Ist  00003000 INTL
20040311)
[    0.112841] ACPI: Interpreter enabled
[    0.112876] ACPI: (supports S0 S3 S4 S5)
[    0.112879] ACPI: Using IOAPIC for interrupt routing
[    0.112916] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report
a bug
[    0.118169] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.118177] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments
MSI]
[    0.118182] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.118425] PCI host bridge to bus 0000:00
[    0.118429] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.118432] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.118435] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.118437] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.118440] pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebfffff window]
[    0.118443] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.118455] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.118579] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[    0.118624] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.118739] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.118766] pci 0000:00:1b.0: reg 0x10: [mem 0xe5100000-0xe5103fff 64bit]
[    0.118827] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.118883] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.118938] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.119008] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.119062] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.119116] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.119186] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.119241] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.119297] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.119338] pci 0000:00:1d.0: reg 0x20: [io  0xe000-0xe01f]
[    0.119406] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.119458] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.119499] pci 0000:00:1d.1: reg 0x20: [io  0xe100-0xe11f]
[    0.119566] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.119616] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.119657] pci 0000:00:1d.2: reg 0x20: [io  0xe200-0xe21f]
[    0.119725] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.119776] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.119817] pci 0000:00:1d.3: reg 0x20: [io  0xe300-0xe31f]
[    0.119885] pci 0000:00:1d.3: System wakeup disabled by ACPI
[    0.119942] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.119964] pci 0000:00:1d.7: reg 0x10: [mem 0xe5104000-0xe51043ff]
[    0.120079] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.120132] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.120225] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.120279] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [    0.120364] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.120370] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.120374] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.120378] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.120485] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x010180
[    0.120503] pci 0000:00:1f.2: reg 0x10: [io  0x0000-0x0007]
[    0.120511] pci 0000:00:1f.2: reg 0x14: [io  0x0000-0x0003]
[    0.120520] pci 0000:00:1f.2: reg 0x18: [io  0x0000-0x0007]
[    0.120528] pci 0000:00:1f.2: reg 0x1c: [io  0x0000-0x0003]
[    0.120536] pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf00f]
[    0.120552] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.120555] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.120557] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.120560] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.120577] pci 0000:00:1f.2: PME# supported from D3hot
[    0.120675] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.120727] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.120883] pci 0000:01:00.0: [10de:0640] type 00 class 0x030000
[    0.120905] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
[    0.120917] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.120928] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit]
[    0.120936] pci 0000:01:00.0: reg 0x24: [io  0xc000-0xc07f]
[    0.120944] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[    0.121034] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.121038] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.121042] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.121047] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.121097] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.121101] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.121169] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.121209] pci 0000:03:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.121237] pci 0000:03:00.0: reg 0x18: [mem 0xe5010000-0xe5010fff 64bit pref]
[    0.121255] pci 0000:03:00.0: reg 0x20: [mem 0xe5000000-0xe500ffff 64bit pref]
[    0.121268] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.121327] pci 0000:03:00.0: supports D1 D2
[    0.121329] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.128032] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.128040] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.128048] pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
[    0.128058] pci 0000:00:1c.1:   bridge window [mem 0xe5000000-0xe50fffff 64bit pref]
[    0.128140] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.128144] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.128152] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.128154] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.128157] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window]
(subtractive decode)
[    0.128160] pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window]
(subtractive decode)
[    0.128162] pci 0000:00:1e.0:   bridge window [mem 0xbff00000-0xfebfffff window] (subtractive
decode)
[    0.128181] pci_bus 0000:00: on NUMA node 0
[    0.128801] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)[    0.128868] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.128933] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.128998] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.129063] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129128] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129193] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.129259] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.129382] ACPI: Enabled 1 GPEs in block 00 to 1F
[    0.129517] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.129517] vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.129517] vgaarb: loaded
[    0.129517] vgaarb: bridge control possible 0000:01:00.0
[    0.129517] SCSI subsystem initialized
[    0.129517] libata version 3.00 loaded.
[    0.129517] ACPI: bus type USB registered
[    0.129517] usbcore: registered new interface driver usbfs
[    0.129517] usbcore: registered new interface driver hub
[    0.129517] usbcore: registered new device driver usb
[    0.129517] PCI: Using ACPI for IRQ routing
[    0.136679] PCI: pci_cache_line_size set to 64 bytes
[    0.136719] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.136721] e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
[    0.136876] NetLabel: Initializing
[    0.136878] NetLabel:  domain hash size = 128
[    0.136880] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.136891] NetLabel:  unlabeled traffic allowed by default
[    0.136917] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.136917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.136917] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.138127] amd_nb: Cannot enumerate AMD northbridges
[    0.138127] clocksource: Switched to clocksource hpet
[    0.146050] AppArmor: AppArmor Filesystem Enabled
[    0.146151] pnp: PnP ACPI init
[    0.146358] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.146364] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.146367] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.146370] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.146372] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.146378] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.146470] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.146601] pnp 00:02: [dma 2]
[    0.146642] pnp 00:02: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.146865] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.147091] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.147216] pnp 00:05: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.147270] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.147344] system 00:07: [io  0x0400-0x04bf] could not be reserved
[    0.147348] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147578] system 00:08: [mem 0xc0000000-0xcfffffff] has been reserved
[    0.147582] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.147786] system 00:09: [mem 0x000cde00-0x000cffff] has been reserve [    0.147790] system 00:09: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.147793] system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.147796] system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.147799] system 00:09: [mem 0xbfee0000-0xbfefffff] could not be reserved
[    0.147802] system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.147805] system 00:09: [mem 0x00100000-0xbfedffff] could not be reserved
[    0.147808] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.147811] system 00:09: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.147814] system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.147817] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.147820] system 00:09: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.147823] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved
[    0.147826] system 00:09: [mem 0x000e0000-0x000effff] has been reserved
[    0.147830] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.147836] pnp: PnP ACPI: found 10 devices
[    0.147842] PnPBIOS: Disabled by ACPI PNP
[    0.184904] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024
ns
[    0.184928] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
02] add_size 200000 add_align 100000
[    0.184932] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size
200000 add_align 100000
[    0.184949] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size
200000 min_align 100000
[    0.184952] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size
200000 min_align 100000
[    0.184955] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res
add_size 200000 min_align 100000
[    0.184958] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res
add_size 200000 min_align 100000
[    0.184966] pci 0000:00:1c.0: BAR 14: assigned [mem 0xe5200000-0xe53fffff]
[    0.184972] pci 0000:00:1c.0: BAR 15: assigned [mem 0xe5400000-0xe55fffff 64bit pref]
[    0.184976] pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe307ffff pref]
[    0.184979] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.184982] pci 0000:00:01.0:   bridge window [io  0xc000-0xcfff]
[    0.184986] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe3ffffff]
[    0.184990] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.184995] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.184998] pci 0000:00:1c.0:   bridge window [io  0xb000-0xbfff]
[    0.185003] pci 0000:00:1c.0:   bridge window [mem 0xe5200000-0xe53fffff]
[    0.185007] pci 0000:00:1c.0:   bridge window [mem 0xe5400000-0xe55fffff 64bit pref]
[    0.185014] pci 0000:03:00.0: BAR 6: assigned [mem 0xe4000000-0xe400ffff pref]
[    0.185017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.185020] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.185025] pci 0000:00:1c.1:   bridge window [mem 0xe4000000-0xe4ffffff]
[    0.185029] pci 0000:00:1c.1:   bridge window [mem 0xe5000000-0xe50fffff 64bit pref]
[    0.185035] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.185039] pci 0000:00:1e.0:   bridge window [io  0xa000-0xafff]
[    0.185050] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.185052] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.185055] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.185058] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window][    0.185060] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.185063] pci_bus 0000:01: resource 0 [io  0xc000-0xcfff]
[    0.185065] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff]
[    0.185068] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.185071] pci_bus 0000:02: resource 0 [io  0xb000-0xbfff]
[    0.185073] pci_bus 0000:02: resource 1 [mem 0xe5200000-0xe53fffff]
[    0.185076] pci_bus 0000:02: resource 2 [mem 0xe5400000-0xe55fffff 64bit pref]
[    0.185079] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.185081] pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe4ffffff]
[    0.185084] pci_bus 0000:03: resource 2 [mem 0xe5000000-0xe50fffff 64bit pref]
[    0.185086] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    0.185089] pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7 window]
[    0.185091] pci_bus 0000:04: resource 5 [io  0x0d00-0xffff window]
[    0.185094] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.185096] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window]
[    0.185099] pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff window]
[    0.185134] NET: Registered protocol family 2
[    0.185332] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.185351] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.185380] TCP: Hash tables configured (established 8192 bind 8192)
[    0.185417] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.185426] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.185474] NET: Registered protocol family 1
[    0.186201] pci 0000:01:00.0: Video device with shadowed ROM
[    0.186206] PCI: CLS 32 bytes, default 64
[    0.186262] Unpacking initramfs...
[    0.861471] Freeing initrd memory: 36868K
[    0.861765] Scanning for low memory corruption every 60 seconds
[    0.862239] audit: initializing netlink subsys (disabled)
[    0.862264] audit: type=2000 audit(1527350395.860:1): initialized
[    0.862636] Initialise system trusted keyring
[    0.862775] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.864930] zbud: loaded
[    0.865083] VFS: Disk quotas dquot_6.6.0
[    0.865132] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.865432] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.865741] fuse init (API version 7.23)
[    0.865929] Key type big_key registered
[    0.865949] Allocating IMA MOK and blacklist keyrings.
[    0.866351] Key type asymmetric registered
[    0.866355] Asymmetric key parser 'x509' registered
[    0.866375] bounce: pool size: 64 pages
[    0.866419] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.866453] io scheduler noop registered
[    0.866457] io scheduler deadline registered (default)
[    0.866502] io scheduler cfq registered
[    0.867098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.867107] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.867145] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.867147] vesafb: scrolling: redraw
[    0.867149] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.867171] vesafb: framebuffer at 0xe1000000, mapped to 0xf8600000, using 1216k, total 1216k [    0.867277] Console: switching to colour frame buffer device 80x30
[    0.867291] fb0: VESA VGA frame buffer device
[    0.867310] intel_idle: does not run on family 6 model 23
[    0.867398] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.867404] ACPI: Power Button [PWRB]
[    0.867464] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.867466] ACPI: Power Button [PWRF]
[    0.867672] GHES: HEST is not enabled!
[    0.867699] isapnp: Scanning for PnP cards...
[    0.868062] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.888439] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.890359] Linux agpgart interface v0.103
[    0.897259] loop: module loaded
[    0.897447] ata_piix 0000:00:1f.2: version 2.13
[    0.897541] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.898442] scsi host0: ata_piix
[    0.898541] scsi host1: ata_piix
[    0.898597] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.898599] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.898712] libphy: Fixed MDIO Bus: probed
[    0.898716] tun: Universal TUN/TAP device driver, 1.6
[    0.898717] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.898769] PPP generic driver version 2.4.2
[    0.898847] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.898853] ehci-pci: EHCI PCI platform driver
[    0.898958] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.898966] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.902883] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.902897] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe5104000
[    0.912014] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.912091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.912093] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.912096] usb usb1: Product: EHCI Host Controller
[    0.912098] usb usb1: Manufacturer: Linux 4.4.0-127-generic ehci_hcd
[    0.912101] usb usb1: SerialNumber: 0000:00:1d.7
[    0.912238] hub 1-0:1.0: USB hub found
[    0.912249] hub 1-0:1.0: 8 ports detected
[    0.912494] ehci-platform: EHCI generic platform driver
[    0.912508] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.912518] ohci-pci: OHCI PCI platform driver
[    0.912533] ohci-platform: OHCI generic platform driver
[    0.912544] uhci_hcd: USB Universal Host Controller Interface driver
[    0.912627] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.912634] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.912640] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.912659] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[    0.912715] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.912718] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.912720] usb usb2: Product: UHCI Host Controller
[    0.912723] usb usb2: Manufacturer: Linux 4.4.0-127-generic uhci_hcd
[    0.912725] usb usb2: SerialNumber: 0000:00:1d.0[    0.912849] hub 2-0:1.0: USB hub found
[    0.912858] hub 2-0:1.0: 2 ports detected
[    0.913038] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.913044] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.913051] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.913074] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[    0.913131] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.913133] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.913136] usb usb3: Product: UHCI Host Controller
[    0.913138] usb usb3: Manufacturer: Linux 4.4.0-127-generic uhci_hcd
[    0.913140] usb usb3: SerialNumber: 0000:00:1d.1
[    0.913268] hub 3-0:1.0: USB hub found
[    0.913277] hub 3-0:1.0: 2 ports detected
[    0.913461] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.913468] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.913474] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.913498] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[    0.913553] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.913555] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.913558] usb usb4: Product: UHCI Host Controller
[    0.913560] usb usb4: Manufacturer: Linux 4.4.0-127-generic uhci_hcd
[    0.913562] usb usb4: SerialNumber: 0000:00:1d.2
[    0.913684] hub 4-0:1.0: USB hub found
[    0.913692] hub 4-0:1.0: 2 ports detected
[    0.913873] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.913879] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.913885] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.913909] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[    0.913964] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.913967] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.913969] usb usb5: Product: UHCI Host Controller
[    0.913971] usb usb5: Manufacturer: Linux 4.4.0-127-generic uhci_hcd
[    0.913973] usb usb5: SerialNumber: 0000:00:1d.3
[    0.914095] hub 5-0:1.0: USB hub found
[    0.914104] hub 5-0:1.0: 2 ports detected
[    0.914297] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.914744] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.914749] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.914909] mousedev: PS/2 mouse device common for all mice
[    0.915083] rtc_cmos 00:01: RTC can wake from S4
[    0.915202] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.915224] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.915236] i2c /dev entries driver
[    0.915303] device-mapper: uevent: version 1.0.3
[    0.915377] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    0.915408] platform eisa.0: Probing EISA bus 0
[    0.915411] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.915414] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.915417] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.915419] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.915421] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.915424] platform eisa.0: Cannot allocate resource for EISA slot 5 [    0.915426] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.915428] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.915431] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.915433] platform eisa.0: EISA: Detected 0 cards
[    0.915449] cpufreq-nforce2: No nForce2 chipset.
[    0.915459] ledtrig-cpu: registered to indicate activity on CPUs
[    0.915794] NET: Registered protocol family 10
[    0.916092] NET: Registered protocol family 17
[    0.916106] Key type dns_resolver registered
[    0.916360] microcode: CPU0 sig=0x10676, pf=0x1, revision=0x60f
[    0.916367] microcode: CPU1 sig=0x10676, pf=0x1, revision=0x60f
[    0.916407] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter
Oruba
[    0.916420] Using IPI No-Shortcut mode
[    0.916593] registered taskstats version 1
[    0.916613] Loading compiled-in X.509 certificates
[    0.919925] Loaded X.509 cert 'Build time autogenerated kernel key:
20c7d67c79d64552d2ae40ce7b1628461141c0de'
[    0.919948] zswap: loaded using pool lzo/zbud
[    0.922598] Key type trusted registered
[    0.927082] Key type encrypted registered
[    0.927089] AppArmor: AppArmor sha1 policy hashing enabled
[    0.927093] ima: No TPM chip found, activating TPM-bypass!
[    0.927114] evm: HMAC attrs: 0x1
[    0.927369]   Magic number: 2:980:993
[    0.927458] rtc_cmos 00:01: setting system clock to 2018-05-26 15:59:56 UTC (1527350396)
[    0.927760] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.927762] EDD information not available.
[    0.927828] PM: Hibernation image not present or could not be loaded.
[    0.934083] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    1.080347] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[    1.080557] ata2.01: HPA detected: current 160834367, native 160836480
[    1.080560] ata2.01: ATA-6: IC35L090AVV207-0, V23OA66A, max UDMA/100
[    1.080563] ata2.01: 160834367 sectors, multi 16: LBA48
[    1.085321] ata1.00: HPA detected: current 976771055, native 976773168
[    1.085325] ata1.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
[    1.085327] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.096265] ata2.00: configured for UDMA/66
[    1.101260] ata1.00: configured for UDMA/133
[    1.120373] ata2.01: configured for UDMA/100
[    1.177259] isapnp: No Plug & Play device found
[    1.177393] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5000AAVS-0 1B01 PQ: 0 ANSI: 5
[    1.177581] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
[    1.177629] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.177647] sd 0:0:0:0: [sda] Write Protect is off
[    1.177650] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.177712] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
[    1.178826] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI:
5
[    1.193395]  sda: sda2 < sda5 sda6 > sda3
[    1.193639] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray[    1.193642] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.193778] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.193805] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.193842] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.195201] scsi 1:0:1:0: Direct-Access     ATA      IC35L090AVV207-0 A66A PQ: 0 ANSI: 5
[    1.195385] sd 1:0:1:0: [sdb] 160834367 512-byte logical blocks: (82.3 GB/76.7 GiB)
[    1.195419] sd 1:0:1:0: Attached scsi generic sg2 type 0
[    1.195436] sd 1:0:1:0: [sdb] Write Protect is off
[    1.195440] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[    1.195464] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or
FUA
[    1.206929]  sdb: sdb1
[    1.207172] sd 1:0:1:0: [sdb] Attached SCSI disk
[    1.207527] Freeing unused kernel memory: 948K
[    1.207596] Write protecting the kernel text: 8024k
[    1.207631] Write protecting the kernel read-only data: 3180k
[    1.207632] NX-protecting the kernel data: 6312k
[    1.219682] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.219791] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.220273] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.224036] usb 1-3: new high-speed USB device number 2 using ehci-pci
[    1.238238] random: systemd-udevd: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.241599] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.241678] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.241905] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.241984] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.242080] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.242156] random: udevadm: uninitialized urandom read (16 bytes read, 18 bits of entropy
available)
[    1.291570] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015
FUJITSU LIMITED
[    1.306865] [drm] Initialized drm 1.1.0 20060810
[    1.328547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.328559] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.329003] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xf8414000, 00:1f:d0:0c:ed:30, XID
1c4000c0 IRQ 27
[    1.329007] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    1.354735] Floppy drive(s): fd0 is 1.44M
[    1.356194] wmi: Mapper loaded
[    1.358817] usb 1-3: New USB device found, idVendor=058f, idProduct=6362
[    1.358821] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.358824] usb 1-3: Product: Mass Storage Device
[    1.358826] usb 1-3: Manufacturer: Generi [    1.358828] usb 1-3: SerialNumber: 058F63626376
[    1.371668] FDC 0 is a post-1991 82077
[    1.392245] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.401844] usb-storage 1-3:1.0: USB Mass Storage device detected
[    1.403090] scsi host2: usb-storage 1-3:1.0
[    1.403192] usbcore: registered new interface driver usb-storage
[    1.408513] usbcore: registered new interface driver uas
[    1.410502] checking generic (e1000000 130000) vs hw (d0000000 10000000)
[    1.410506] checking generic (e1000000 130000) vs hw (e0000000 2000000)
[    1.410508] fb: switching to nouveaufb from VESA VGA
[    1.410539] Console: switching to colour dummy device 80x25
[    1.410723] nouveau 0000:01:00.0: NVIDIA G96 (096000c1)
[    1.529223] nouveau 0000:01:00.0: bios: version 62.94.3c.00.00
[    1.550513] nouveau 0000:01:00.0: bios: M0203T not found
[    1.550516] nouveau 0000:01:00.0: bios: M0203E not matched!
[    1.550519] nouveau 0000:01:00.0: fb: 1024 MiB DDR2
[    1.600234] [TTM] Zone  kernel: Available graphics memory: 428922 kiB
[    1.600238] [TTM] Zone highmem: Available graphics memory: 2068798 kiB
[    1.600240] [TTM] Initializing pool allocator
[    1.600247] [TTM] Initializing DMA pool allocator
[    1.600263] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[    1.600266] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[    1.600272] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[    1.600274] nouveau 0000:01:00.0: DRM: DCB version 4.0
[    1.600277] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[    1.600281] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[    1.600284] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[    1.600286] nouveau 0000:01:00.0: DRM: DCB outp 03: 02022332 00c20090
[    1.600289] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[    1.600291] nouveau 0000:01:00.0: DRM: DCB conn 01: 00000100
[    1.600294] nouveau 0000:01:00.0: DRM: DCB conn 02: 00002261
[    1.600296] nouveau 0000:01:00.0: DRM: DCB conn 03: 00000211
[    1.600299] nouveau 0000:01:00.0: DRM: DCB conn 04: 00000213
[    1.644825] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.644829] [drm] Driver supports precise vblank timestamp query.
[    1.860027] tsc: Refined TSC clocksource calibration: 2499.999 MHz
[    1.860037] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x240938fe3e8, max_idle_ns:
440795307177 ns
[    1.944827] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[    2.069409] nouveau 0000:01:00.0: DRM: allocated 1366x768 fb: 0x70000, bo f54b1400
[    2.069507] fbcon: nouveaufb (fb0) is primary device
[    2.069588] Console: switching to colour frame buffer device 170x48
[    2.069621] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    2.080043] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[    2.400855] scsi 2:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
[    2.401453] scsi 2:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
[    2.401954] scsi 2:0:0:2: Direct-Access     Generic  USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[    2.402491] scsi 2:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
[    2.403948] sd 2:0:0:0: Attached scsi generic sg3 type 0
[    2.405325] sd 2:0:0:1: Attached scsi generic sg4 type 0
[    2.405706] sd 2:0:0:2: Attached scsi generic sg5 type 0
[    2.407660] sd 2:0:0:3: Attached scsi generic sg6 type 0[    2.411465] sd 2:0:0:1: [sdd] Attached SCSI removable disk
[    2.413457] sd 2:0:0:2: [sde] Attached SCSI removable disk
[    2.415090] sd 2:0:0:3: [sdf] Attached SCSI removable disk
[    2.428146] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[    2.578686] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[    2.860078] clocksource: Switched to clocksource tsc
[    2.929517] random: nonblocking pool is initialized
[    3.721418] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[    5.092844] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX
+IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    5.092989] systemd[1]: Detected architecture x86.
[    5.112780] systemd[1]: Set hostname to <nz-G31M-S2L>.
[    7.002682] systemd[1]: Started Trigger resolvconf update for networkd DNS.
[    7.002849] systemd[1]: Created slice User and Session Slice.
[    7.002908] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.002956] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.002997] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    7.003011] systemd[1]: Reached target Encrypted Volumes.
[    7.003023] systemd[1]: Reached target User and Group Name Lookups.
[    7.003067] systemd[1]: Listening on udev Control Socket.
[    7.003115] systemd[1]: Listening on Journal Socket.
[    7.003283] systemd[1]: Set up automount Arbitrary Executable File Formats File System
Automount Point.
[    7.003302] systemd[1]: Reached target Remote File Systems (Pre).
[    7.003315] systemd[1]: Reached target Remote File Systems.
[    7.003346] systemd[1]: Listening on Syslog Socket.
[    7.003430] systemd[1]: Created slice System Slice.
[    7.016118] systemd[1]: Mounting Huge Pages File System...
[    7.016709] systemd[1]: Started Braille Device Support.
[    7.017593] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    7.018169] systemd[1]: Started Read required files in advance.
[    7.018290] systemd[1]: Reached target Slices.
[    7.018962] systemd[1]: Starting Uncomplicated firewall...
[    7.019586] systemd[1]: Starting Set console keymap...
[    7.020208] systemd[1]: Mounting POSIX Message Queue File System...
[    7.020812] systemd[1]: Mounting Debug File System...
[    7.200329] systemd[1]: Listening on Journal Audit Socket.
[    7.212220] systemd[1]: Starting Journal Service...
[    7.212282] systemd[1]: Listening on fsck to fsckd communication Socket.
[    7.424185] systemd[1]: Starting Load Kernel Modules...
[    7.424272] systemd[1]: Listening on udev Kernel Socket.
[    7.536579] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    7.548209] systemd[1]: Starting Create Static Device Nodes in /dev...
[    7.592278] systemd[1]: Started Uncomplicated firewall.
[    7.908381] systemd[1]: Mounted Huge Pages File System.
[    7.908433] systemd[1]: Mounted POSIX Message Queue File System.
[    7.908456] systemd[1]: Mounted Debug File System.
[    8.337742] systemd[1]: Started Journal Service.
[    8.354114] lp: driver loaded but no devices found
[    8.412975] ppdev: user-space parallel port driver
[    8.467768] parport_pc 00:04: reported by Plug and Play ACPI [    8.467836] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    8.564161] lp0: using parport0 (interrupt-driven).
[   10.799785] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[   11.355956] systemd-journald[248]: Received request to flush runtime journal from PID 1
[   12.641378] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.649374] intel_rng: FWH not detected
[   12.939174] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F
conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C)
(20150930/utaddress-254)
[   12.939183] ACPI: If an ACPI driver is available for this device, you should use it instead of the
native driver
[   12.939226] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   13.281017] leds_ss4200: no LED devices found
[   14.008865] intel_powerclamp: No package C-state available
[   14.036991] intel_powerclamp: No package C-state available
[   14.738096] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1
(0x14/0x0/0x0/0x0/0x0) type:line
[   14.738103] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.738106] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.738108] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   14.738111] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[   14.738113] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   14.738116] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   14.738118] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   14.738121] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   14.748373] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[   14.748464] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[   14.748545] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   14.748627] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   14.748713] input: HDA Intel Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.338322] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   17.692162] audit: type=1400 audit(1527350413.260:2): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=580
comm="apparmor_parser"
[   17.692174] audit: type=1400 audit(1527350413.260:3): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-
client.action" pid=580 comm="apparmor_parser"
[   17.692181] audit: type=1400 audit(1527350413.260:4): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper"
pid=580 comm="apparmor_parser"
[   17.692187] audit: type=1400 audit(1527350413.260:5): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script"
pid=580 comm="apparmor_parser"
[   18.004661] audit: type=1400 audit(1527350413.572:6): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session"
pid=579 comm="apparmor_parser"
[   18.004675] audit: type=1400 audit(1527350413.572:7): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-
session//chromium" pid=579 comm="apparmor_parser"
[   18.916165] Adding 1831932k swap on /dev/sda5.  Priority:-1 extents:1 across:1831932k FS[   19.008361] audit: type=1400 audit(1527350414.576:8): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=703
comm="apparmor_parser"
[   19.008380] audit: type=1400 audit(1527350414.576:9): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=703
comm="apparmor_parser"
[   19.008387] audit: type=1400 audit(1527350414.576:10): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=703
comm="apparmor_parser"
[   19.008394] audit: type=1400 audit(1527350414.576:11): apparmor="STATUS"
operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer//sanitized_helper"
pid=703 comm="apparmor_parser"
[   33.904287] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[   33.913356] r8169 0000:03:00.0 enp3s0: link down
[   33.913399] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
[  149.348024] usb 1-5: new high-speed USB device number 3 using ehci-pci
[  149.482503] usb 1-5: New USB device found, idVendor=0bda, idProduct=8172
[  149.482510] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  149.482516] usb 1-5: Product: RTL8191S WLAN Adapter
[  149.482520] usb 1-5: Manufacturer: Manufacturer Realtek
[  149.482525] usb 1-5: SerialNumber: 00e04c000001
[  150.568016] r8712u: module is from the staging directory, the quality is unknown, you have been
warned.
[  150.569276] r8712u: register rtl8712_netdev_ops to netdev_ops
[  150.569283] usb 1-5: r8712u: USB_SPEED_HIGH with 4 endpoints
[  150.569748] usb 1-5: r8712u: Boot from EFUSE: Autoload OK
[  167.169014] usb 1-5: r8712u: CustomerID = 0x0000
[  167.169023] usb 1-5: r8712u: MAC Address from efuse = 00:e0:4c:87:00:00
[  167.169028] usb 1-5: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
[  167.169109] usbcore: registered new interface driver r8712u
[  167.283929] r8712u 1-5:1.0 wlx00e04c870000: renamed from wlan0
[  167.366999] cfg80211: World regulatory domain updated:
[  167.367005] cfg80211:  DFS Master region: unset
[  167.367007] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp),
(dfs_cac_time)
[  167.367010] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm),
(N/A)
[  167.367012] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm),
(N/A)
[  167.367015] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm),
(N/A)
[  167.367018] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO),
(N/A, 2000 mBm), (N/A)
[  167.367021] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO),
(N/A, 2000 mBm), (0 s)
[  167.367023] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0
s)
[  167.367025] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm),
(N/A)
[  167.367028] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm),
(N/A)
[  173.803914] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [  173.813349] r8169 0000:03:00.0 enp3s0: link down
[  173.813427] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 26 Μάιος 2018, 22:36

Να αναφερω επισης οτι το pc μου παντα ειχε κατα καιρους καποιο θεμα με την αναγνωση usb flash οπου αν δεν το εβλεπε μια θυρα επρεπε να δοκιμασω σε αλλη κοκ. Σαπνια αν δεν το εβλεπε καμια θυρα επρεπε να κανω επανεκκινηση το pc για να δοκιμασω ξανα. Ομως ο ανταπτορας δεν αντιμετωπισε ποτε τετοιο θεμα εδω και περιπου 2 χρονια τωρα. Ολα λειτουργουσαν αψογα γιαυτο και μου κανει εντυπωση που συνεβη ξαφνικα αυτο.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04  Το θέμα επιλύθηκε

Δημοσίευσηαπό the_eye » 26 Μάιος 2018, 22:47

Δεν βλέπω κάποιο πρόβλημα στο dmesg που έδωσες. Μπορεί να είναι πρόβλημα του υπολογιστή όπως ανέφερες.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Προβλημα με usb wi-fi adapter στο 16.04

Δημοσίευσηαπό nikos_N » 27 Μάιος 2018, 14:31

the_eye έγραψε:Δεν βλέπω κάποιο πρόβλημα στο dmesg που έδωσες. Μπορεί να είναι πρόβλημα του υπολογιστή όπως ανέφερες.

Σήμερα το πρωί άνοιξα το κουτί για να δω αν τρέχει κάτι με τις συνδέσεις μέσα (αν και δεν έχω ιδιαίτερες γνώσεις). Δεν είδα κάτι περίεργο, απλά έβγαλα και ξαναέβαλα κάποιες συνδέσεις στις θέσεις τους. Μετά απο αυτό όλα λειτουργούν πάλι κανονικά. :?
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-76-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu), Ubuntu 5.15.0-75-generic, Windows Boot Manager
3 Intel Core i3-9100 CPU @ 3.60GHz ‖ RAM 7760 MiB ‖ HP 843B - HP HP Pavilion Desktop 590-p0xxx
4 Intel CoffeeLake-S GT2 [UHD Graphics 630] [8086:3e91] {i915}
5 enp2s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15) ⋮ wlp1s0: Realtek RTL8821CE 802.11ac PCIe Wireless Network Adapter [10ec:c821]
nikos_N
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 523
Εγγραφή: 04 Ιούλ 2012, 21:00
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Δικτύου (Ethernet, WiFi, Bluetooth) / Internet